The breeding type cage basically comprises of 2 rabbit cages of size 600mm x 450mm x 450mm separated by a removable partition. The partition will be made of wire mesh of 2x1x12swg welded on a frame of 5mm SS rod and is provided with a handle for ease in removing and inserting.
MOC: Made of AISI non-magnetic alkaline and chemical resistant 304 quality stainless steel sheet and wire.
Main frame: Main frame of the cage made of heavy duty S.S square pipe of 12.7mm x 12.7mm x 16swg and covered up to a height of 155mm from bottom with SS sheet of 22swg on three sides except fron. Wire mesh made of 2.5mm and 5mm S.S rod welded inside the SS square pipe on all three side including top of cage.
Door: Cage has two doors and each door has a fixed label holder and arrangement for fixing water bottle and food hopper. The door will be made of wire mesh of 2.5mm and 5mm SS rod welded on a frame of 5mm SS rod and covered with 22swg sheet.
Food Hopper: J shaped food hopper made of SS304 22swg
Water bottle: Polypropylene water bottle of capacity 650ml fitted with cap having S.S bent type nozzle
Floor Grill: Each part is provided with one bottom floor net. Bottom floor net is of 12x26mm made of 2.5mm & 5mm SS wired welded on a frame of 5mm SS rod. Floor net is fixed and non-removable type.
Tray: Excreta tray made of 22swg Stainless steel sheet with turned and smoothed edges. The cage is provided with S.S shaped angle of 20mmx20mmx16swg for Excreta Tray.
Cage Size: 1210mm x 450mmx450mm (LXWXH)