Spinal Cord Injury Device

The SCI device is constructed using a steel impounder inserted into a Teflon base. The impounder is attached to the end of the hollow tube by a horizontal pin to guide the weight and to prevent it from bouncing on impact. The weight is made of Teflon coated stainless steel and is supported by a removable pin which is also used to release the weight. Rod magnet is used for retrieval of the weight after the injury.

Description

Documentation 
 

Spinal cord injury usually results from trauma and can also be the result of diseases or degeneration. Depending on the severity of the injury, SCI can result in severe sensory/motor dysfunction, secondary injuries that could result in tissue damage and cell death, glial scar formation, and impaired regeneration. Apart from the injuries, sufferers of SCI also tend to experience chronic pain that impacts their everyday life.

Since there exists no curative treatment for SCI, establishing an ideal animal model to mirror human injuries is crucial for the identification of the injury mechanism and its effects on the capabilities of its sufferer. The novel SCI Device is modeled after the Weight Drop model, considered as a standard experimental spinal cord contusion injury model designed by Alfred Reginald Allen in 1911 (Koozekanani et al., 1976). Allen’s spinal cord contusion technique was iterated over the years, but Ahdeah Pajoohesh-Ganji and colleagues’ version is a novel yet efficient method for spinal cord contusion.

The SCI device is constructed using a steel impounder inserted into a Teflon base. The impounder is attached to the end of the hollow tube by a horizontal pin to guide the weight and to prevent it from bouncing on impact. The weight is made of Teflon coated stainless steel and is supported by a removable pin which is also used to release the weight. Rod magnet is used for retrieval of the weight after the injury.

Apparatus and Equipment

 

A hollow Teflon tube of length 25 cm and diameter 6 mm is used to house the impounder and the weight. The steel impounder is attached to a horizontal pin that helps guide the weight and prevent the bouncing of the weight on impact. The impounder is 3 cm in height and 5 mm in diameter and has a 1 cm needle of diameter 1.2 mm on its end. The height of the drop can be adjusted to 10 mm or 20 mm above the impounder for mild-moderate or moderate-severe injury, respectively. This is done with the help of a removable pin that supports the Teflon coated stainless steel weight and also functions as the release mechanism for the weight. The retrieval of the weight is done using a rod magnet lowered into the hollow tube.

 

 

 

Protocol

 

The subject is anesthetized using Isoflurane, and a laminectomy is performed at the desired site of injury. The stabilization of the spinal cord is done using transverse clamps. The contusive injury is performed using a weight of 1.85 g released from 10 mm or 20 mm for mild-moderate or moderate-severe injury respectively. The impounder must be placed perpendicularly in the center of the spinal cord at the time of impact to ensure symmetrical injury.

 

The SCI device has been used in studies involving mouse models to study the hind-limb functional performance after contusion SCI at T9 (Pajoohesh-Ganji et al., 2010).

 

 

Strengths and Limitations

 

Strengths 

The rats have been predominantly used in the investigatory studies and experiments of spinal cord injuries. But with the availability of transgenic animals, there has been an increase in the usage of mouse models. The SCI device can be successfully used for inducing spinal cord injuries in mice enabling investigation of the correlation between behavioral tests and the injury severity or tissue damage. The research strongly backs the inverse correlation between the severity of injury and white matter. The white matter decreases with the increased severity of the injury (McEwen and Springer, 2006). The preciseness of the modified SCI device to manipulate the extent of the injury is critical in achieving more spared peripheral white matter.

 

Limitations

The position of the impounder plays a critical role in inducing symmetrical injuries. Therefore, the impounder must be placed perpendicularly in the center of the spinal cord at the time of impact to ensure symmetrical injury

 
Summary
  1. The device uses a removable pin to both support the weight at the ideal height and to function as a release mechanism
  2. The impounder is held in place using a horizontal pin which guides the weight and also prevents it from bouncing on impact
  3. Retrieval of the weight is done using a rod magnet
  4. The impounder must be placed perpendicular to the spinal cord to induce symmetrical injuries

 

References

 

  1. Koozekanani SH, Vise WM, Hashemi RM, McGhee RB. (1976). Possible mechanisms for observed pathophysiological variability in experimental spinal cord injury by the method of Allen. J Neurosurg.  Apr; 44(4):429-34.
  2. Ahdeah Pajoohesh-Ganji, Kimberly R. Byrnes, Gita Fatemi, Alan I. Faden. (2010). A combined scoring method to assess behavioral recovery after mouse spinal cord injury. Neurosci Res; 67(2): 117–125.
  3. Akhtar AZ, Pippin JJ, Sandusky CB. (2008). Animal models in spinal cord injury: a review.Rev Neurosci; 19:47–60.
  4. McEwen, M.L., Springer, J.E. (2006). Quantification of locomotor recovery following
  5. spinal cord contusion in adult rats. J. Neurotrauma 23, 1632–1653.
 

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Spinal Cord Injury Device”

Questions & Answers

There are no questions yet. Be the first to ask a question about this product.