Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
239
datasets available to search
ShareScore release 0.9.0
Dataset results
239 results for “remote sensing data”
PEM Tropics B DC-8 Aircraft Remotely Sensed Lidar Atmospheric Sensing Experiment (LASE) Data
PEM-Tropics-B_AircraftRemoteSensing_DC8_LASE_Data is the remotely sensed Lidar Atmospheric Sensing Experiment (LASE) data collected onboard the DC-8 aircraft during the Pacific Exploratory Mission (PEM) Tropics B suborbital campaign. Data collection for this product is complete.From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns were focused on the tropical Pacific region (PEM-Tropics) which was recognized as a “very large chemical vessel.” The overarching science objective was to assess the anthropogenic impact on tropospheric oxidizing power. A secondary objective was to investigate the impact of atmospheric sulfur chemistry, including oxidation of marine biogenic emission of dimethyl sulfide (DMS) on aerosol loading and radiative effect, which is of critical importance in the assessment of global climate change. The PEM-Tropics mission was conducted in two phases to contrast the influence of biomass burning in the dry season and the “relatively clean” wet season. The first, PEM-Tropics A, was carried out during the end of the dry season (August-September 1996), and the second, PEM-Topics B, was conducted during the wet season (March-April 1999). To accomplish its objectives, PEM-Tropics enlisted the NASA DC-8 and P-3B aircrafts to carry out longitudinal and latitudinal surveys at various altitudes as well as vertical profile sampling across the Pacific basin. Both aircrafts were equipped with in-situ instruments measuring hydroperoxyl radicals (HOx), ozone (O3), photochemical precursors (including, reactive nitrogen species and non-methane hydrocarbon species), and intermediate products (e.g., hydrogen peroxide (H2O2), formaldehyde (CH2O), and acetic acid (CH3OOH). The P3-B in-situ instrument payload also included a direct measurement of hydroxyl (OH) for both missions, while the OH and hydroperoxyl radical (HO2) measurements were added to DC-8 aircraft for PEM-Tropics B. Taking advantage of its excellent low altitude capability, the P-3B was instrumented with a comprehensive sulfur measurement package and conducted pseudo-Lagragian sampling for evaluating DMS oxidation chemistry, including measurements of DMS, sulfur dioxide (SO2), sulfuric acid (H2SO4), and methylsulfonic acid (MSA) as well as the first airborne measurement of dimethyl sulfoxide (DMSO) during PEM-Tropics B. More importantly, it was the first time that DMS (the source), OH and O3 (primary oxidants), and products (DMSO, MSA, H2SO4, SO2) were measured simultaneously aboard an aircraft in the tropical pacific. These observations, specifically DMSO, presented a substantial challenge to the DMS oxidation kinetics to this day. The DC-8 aircraft was equipped with the Differential Absoprtion Lidar (DIAL) during PEM-Tropics A, and the differential absorption lidars DIAL and LASE during PEM-Tropics B. These lidars provided real-time information for fine tuning the flight tracks to capture sampling opportunities. The lidar data products themselves provide valuable information of vertical profiles of ozone as well as aerosol and water vapor in tropical Pacific Furthermore, both aircrafts were fitted with instruments for aerosol composition and microphysical property measurements. Detailed description related to the motivation, implementation, and instrument payloads are available in the PEM-Tropics A overview paper and the PEM-Tropics B overview paper. Most of the publications based on PEM-Tropics A and B observations are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-Tropics A and NASA Global Tropospheric Experiment Pacific Exploratory Mission in the Tropics Phase B: Measurement and Analyses (PEM-Tropics B), while other publications such as Nowak et al. (2001) were published prior to the special issues.
SASS (Subsonics Assessment) Ozone and NOx Experiment (SONEX) Differential Absorption Lidar (DIAL) Remotely Sensed Data
SONEX_AircraftRemoteSensing_DC8_DIAL_Data_1 is the Differential Absorption Lidar (DIAL) remotely sensed data collected onboard the DC-8 aircraft during the SONEX suborbital campaign. Data collection is complete.The SASS (Subsonics Assessment) Ozone and NOx Experiment (SONEX) was an international, multi-organizational mission that took place in October-November 1997. NASA was the US sponsor of SONEX that partnered with POLINAT-2 (Pollution from Aircraft Emissions in the North Atlantic Flight Corridor) funded by the German DLR (Deutsches Zentrum für Luft- und Raumfahrt) or German Aerospace Agency. NASA flew the DC-8 aircraft out of NASA/Ames Research Center. DLR operated an instrumented Falcon 20 aircraft. The staging locations for NAFC sampling were primarily Bangor, Maine (US), and Shannon, Ireland. Subsonic aircraft emissions impact several aspects of atmospheric composition: nitrogen oxides (NOx), CO, and hydrocarbons from emissions can perturb upper tropospheric/lower stratospheric (UT/LS) ozone; water vapor, soot, and sulfur oxides (SOx) emitted by aircraft may perturb clouds and aerosols, changing UT/LS radiative forcing and global temperature.In SONEX and POLINAT, flights were conducted in the vicinity of the North Atlantic Flight Coordinator (NAFC) to observe the impact of aircraft emissions on NOx and ozone (O3). The DC-8 aircraft payload (Singh et al., 1999) primarily measured in-situ CO, CO2, hydrocarbons/halocarbons, O3, aerosols (Dibb et al., 2000), OH/HO2, water vapor, nitric acid (Talbot et al., 1999), photolysis rates, temperature, pressure, winds, NOx, and NOy.Three sampling approaches were implemented during SONEX. First, special meteorological (Fuelberg et al., 2000) were developed to allow targeted sampling for air parcels affected by aircraft emissions and various meteorological events, e.g., convection, lightning (Jeker et al., 2000), stratospheric intrusions (Cho et al., 2000). Second, because the NAFC had not been extensively sampled in the past, it was important for SONEX to characterize the climatology of trace species like CN (Wang et al., 2000), NOx and NOy (Koike et al., 2000). Third, tracers (Simpson et al., 2000; Thompson et al., 1999) and model sensitivity studies (Meijer et al., 2000) were employed for Air Mass Identification. This sampling strategy answered the following questions: Where and when are air masses found with the greatest aircraft influence? When and where was stratospheric air sampled? SONEX showed a substantial impact of aircraft emissions on UT/LS NOx and CN in the vicinity of fresh aircraft emissions. However, during October-November 1997 over the NAFC, UT/LS NOx was dominated by surface emissions redistributed by convection and augmented by lightning.
ACEPOL Research Scanning Polarimeter (RSP) Remotely Sensed Data Version 1
ACEPOL Research Scanning Polarimeter (RSP) Remotely Sensed Data (ACEPOL_AircraftRemoteSensing_RSP_Data) are remotely sensed measurements collected by the Research Scanning Polarimeter (RSP) onboard the ER-2 during the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) campaign. In order to improve our understanding of the effect of aerosols on climate and air quality, measurements of aerosol chemical composition, size distribution, height profile, and optical properties are of crucial importance. In terms of remotely sensed instrumentation, the most extensive set of aerosol properties can be obtained by combining passive multi-angle, multi-spectral measurements of intensity and polarization with active measurements performed by a High Spectral Resolution Lidar. During Fall 2017, the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) campaign, jointly sponsored by NASA and the Netherlands Institute for Space Research (SRON), performed aerosol and cloud measurements over the United States from the NASA high altitude ER-2 aircraft. Six instruments were deployed on the aircraft. Four of these instruments were multi-angle polarimeters: the Airborne Hyper Angular Rainbow Polarimeter (AirHARP), the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI), the Airborne Spectrometer for Planetary Exploration (SPEX Airborne) and the Research Scanning Polarimeter (RSP). The other two instruments were lidars: the High Spectral Resolution Lidar 2 (HSRL-2) and the Cloud Physics Lidar (CPL). The ACEPOL operation was based at NASA’s Armstrong Flight Research Center in Palmdale California, which enabled observations of a wide variety of scene types, including urban, desert, forest, coastal ocean and agricultural areas, with clear, cloudy, polluted and pristine atmospheric conditions. The primary goal of ACEPOL was to assess the capabilities of the different polarimeters for retrieval of aerosol and cloud microphysical and optical parameters, as well as their capabilities to derive aerosol layer height (near-UV polarimetry, O2 A-band). ACEPOL also focused on the development and evaluation of aerosol retrieval algorithms that combine data from both active (lidar) and passive (polarimeter) instruments. ACEPOL data are appropriate for algorithm development and testing, instrument intercomparison, and investigations of active and passive instrument data fusion, which is a valuable resource for remote sensing communities as they prepare for the next generation of spaceborne MAP and lidar missions.
TRACE-A DC-8 Remotely Sensed Differential Absorption Lidar (DIAL) Data
TRACE-A_AircraftRemoteSensing_DC8_DIAL_Data is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the DC-8 aircraft during the Transport and Atmospheric Chemistry near the Equator - Atlantic (TRACE-A) suborbital campaign. Data collection for this product is complete.The TRACE-A mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-A was conducted in the Atlantic from September 21 to October 24, 1992. TRACE-A had the objective of determining the cause and source of the high concentrations of ozone that accumulated over the Atlantic Ocean between southern Africa and South America from August to October. NASA partnered with the Brazilian Space Agency (INPE) to accomplish this goal. The NASA DC-8 aircraft and ozonesondes were utilized during TRACE-A to collect the necessary data. The DC-8 was equipped with 19 instruments. A few instruments on the DC-8 include the Differential Absorption Lidar (DIAL), the Laser-Induced Fluorescence, the O3-NO Ethylene/Forward Scattering Spectrometer, the Modified Licor, and the DACOM IR Laser Spectrometer. The DIAL was responsible for a variety of measurements, which include Nadir IR aerosols, Nadir UV aerosols, Zenith IR aerosols, Zenith VS aerosols, ozone, and ozone column. The Laser-Induced Fluorescence instrument collected measurements on NxOy in the atmosphere. Measurements of ozone were recorded by the O3-NO Ethylene/Forward Scattering Spectrometer while the Modified Licor recorded CO2. Finally, the DACOM IR Laser Spectrometer gathered an assortment of data points, including CO, O3, N2O, CH4, and CO2. Ozonesondes played a role in data collection for TRACE-A along with the DC-8 aircraft. The sondes were dropped from the DC-8 aircraft in order to gather data on ozone, temperature, and atmospheric pressure.
DISCOVER-AQ Colorado Deployment P-3B Aircraft Remotely Sensed Cloud Absorption Radiometer (CAR) Data
DISCOVERAQ_Colorado_Radiation_AircraftRemoteSensing_CAR_Data contains remotely sensed data collected via the Cloud Absorption Radiometer (CAR) onboard NASA's P-3B aircraft during the Colorado (Denver) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Colorado deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
ACEPOL Airborne Hyper Angular Rainbow Polarimeter (AirHARP) Remotely Sensed Data Version 1
ACEPOL Airborne Hyper Angular Rainbow Polarimeter (AirHARP) Remotely Sensed Data (ACEPOL_AircraftRemoteSensing_AirHARP_Data) are remotely sensed measurements collected by the Airborne Hyper Angular Rainbow Polarimeter (AirHARP) onboard the ER-2 during ACEPOL. In order to improve our understanding of the effect of aerosols on climate and air quality, measurements of aerosol chemical composition, size distribution, height profile, and optical properties are of crucial importance. In terms of remotely sensed instrumentation, the most extensive set of aerosol properties can be obtained by combining passive multi-angle, multi-spectral measurements of intensity and polarization with active measurements performed by a High Spectral Resolution Lidar. During Fall 2017, the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) campaign, jointly sponsored by NASA and the Netherlands Institute for Space Research (SRON), performed aerosol and cloud measurements over the United States from the NASA high altitude ER-2 aircraft. Six instruments were deployed on the aircraft. Four of these instruments were multi-angle polarimeters: the Airborne Hyper Angular Rainbow Polarimeter (AirHARP), the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI), the Airborne Spectrometer for Planetary Exploration (SPEX Airborne) and the Research Scanning Polarimeter (RSP). The other two instruments were lidars: the High Spectral Resolution Lidar 2 (HSRL-2) and the Cloud Physics Lidar (CPL). The ACEPOL operation was based at NASA’s Armstrong Flight Research Center in Palmdale California, which enabled observations of a wide variety of scene types, including urban, desert, forest, coastal ocean and agricultural areas, with clear, cloudy, polluted and pristine atmospheric conditions. The primary goal of ACEPOL was to assess the capabilities of the different polarimeters for retrieval of aerosol and cloud microphysical and optical parameters, as well as their capabilities to derive aerosol layer height (near-UV polarimetry, O2 A-band). ACEPOL also focused on the development and evaluation of aerosol retrieval algorithms that combine data from both active (lidar) and passive (polarimeter) instruments. ACEPOL data are appropriate for algorithm development and testing, instrument intercomparison, and investigations of active and passive instrument data fusion, which is a valuable resource for remote sensing communities as they prepare for the next generation of spaceborne MAP and lidar missions.
SOLVE I DC-8 Aircraft Remotely Sensed Lidar Atmospheric Sensing Experiment (LASE) Data
SOLVE1_AircraftRemoteSensing_DC8_LASE_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE) by the Lidar Atmospheric Sensing Experiment (LASE) instrument. Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.
DISCOVER-AQ Texas Deployment B-200 Aircraft Remotely Sensed GCAS Data
DISCOVERAQ_Texas_AircraftRemoteSensing_B200_GCAS_Data contains remotely sensed data collected by the GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS) onboard NASA's B-200 aircraft during the Texas (Houston) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Texas deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
MOOSE NASA G-3 Aircraft GEO-CAPE Airborne Simulator (GCAS) Remotely Sensed Data
MOOSE_AircraftRemoteSensing_NASA-G3_GCAS_Data contains remotely sensed data collected by the GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS) onboard NASA's Gulfstream-III (G-3) aircraft during the Michigan-Ontario Ozone Source Experiment (MOOSE).The Michigan-Ontario Ozone Source Experiment (MOOSE) is an international collaboration between US and Canadian agencies: the Ontario Ministry of Environment, Conservation, and Parks (MECP), the Environment and Climate Change Canada (ECCC), the US Environmental Protection Agency (EPA), and the Michigan Department of Environment, Great Lakes, and Energy (EGLE). These agencies conducted three field experiments to ensure a viable ozone attainment strategy which, due to their common goal, were given the common name MOOSE. The three field experiments that MOOSE encapsulates are: the Great Lakes Meteorology and Ozone Recirculation (GLAMOR) experiment, the Chemical Source Signatures (CHESS) experiment, and the Methane Releases from Landfills and Gas Lines (MERLIN) experiment. Field studies were conducted for MOOSE in 2021 and 2022. MOOSE consists of two phases, with the first occurring over six weeks from May to June 2021, and the second phase occurring during the summer of 2022. Both airborne and ground instruments are used in completing the campaign’s main goal of aiding in the creation of an ozone attainment strategy for Southeast Michigan (SEMI). SEMI is currently designated as in-marginal nonattainment of the U.S. federal ozone standard. The campaign also has the goal of better understanding what contributes to elevated ozone levels in the Border region, the immediate area on both sides of the US-Canada border. Along with understanding the contributing factors of elevated ozone levels, the campaign aims to understand how the elevated ozone levels cause exceedances to the Canadian ambient air quality standard for ozone.In addition to MOOSE’s overarching goals, GLAMOR, CHESS, and MERLIN have their own objectives to fulfill. GLAMOR seeks to understand and simulate complex 3D flows that are associated with lake breeze circulations, the urban heat island (UHI) and its interaction with the lake breeze, and the impact of lake breezes and the UHI on ozone and ozone precursor transport. GLAMOR also aims to understand and track the influence of urban emissions and land-lake breezes on urban oxidative capacity through nitrous acid (HONO) and related reactive nitrogen species. Determining the conceptual picture (mesoscale meteorological patterns and photochemical production locations) for ozone exceedances in the Border region is what this campaign aims to achieve as well. Finally, GLAMOR aims to select representative ozone episodes for each identified mesoscale pattern, as well as conduct modeling and data analyses in support of an ozone attainment demonstration. The second sub-experiment, CHESS, has a goal to characterize the ozone precursor signatures at the key monitoring stations in the Border region where design values are highest during ozone exceedances in the typical year. CHESS will characterize emission plumes from point sources, area sources, and major industrial sectors in the Border region as well as their impacts on ozone design values on the two sides of the U.S. and Canada border. CHESS also aims to perform air quality model simulations of potential emission control strategies. The third sub-experiment, MERLIN, seeks to determine the natural gas leakage rate of pipelines or other infrastructure in SEMI. Quantifying methane, formaldehyde, and other emissions from landfills in the Border region as well as determining the contributions of large methane sources to ozone exceedances in the Border region are the two other objectives MERLIN is set to accomplish. In doing this, potential control strategies of gas emission into the atmosphere can be drafted and implemented.The three sub-experiments are equipped with their own payloads and stations where research is conducted. GLAMOR uses ground stations and Aerodyne Networks to gather data from MECP’s Windsor West air monitoring station in Ontario, EGLE’s Detroit East 7 Mile PAMS Station, EGLE’s Port Huron monitoring station, as well as collecting field measurements of concentration and isotopic composition of NOx, HONO, NO2, HNO3, and NO3. CHESS utilizes mobile labs, ground stations, and the NASA Gulfstream III (G-III) aircraft while working with the Aerodyne Mobile lab, University of Michigan Pollution Assessment Lab (MPAL), and MECP Mobile Lab. CHESS utilizes these tools and payloads to measure CH4, HCHO, CO2, CO, H2O, O3, SO2, and NOx. MERLIN utilizes mobile labs, drones, and ground stations to work with the University of Michigan Mobile Lab, the Colorado State University Mobile Lab, and the EPA mobile lab. Drone-mounted meteorological chemical sensors for CH4, CH2O, and O3 precursors as well as the EPA GMAP mobile platform are used to measure hydrogen sulfide, methane, benzene, tolu
DISCOVER-AQ Maryland Deployment UC-12 Aircraft Remotely Sensed Airborne Compact Atmospheric Mapper Data
DISCOVERAQ_Maryland_AircraftRemoteSensing_UC12_ACAM_Data contains remotely sensed data collected by the Airborne Compact Atmospheric Mapper (ACAM) onboard NASA's UC-12 aircraft during the Maryland deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Maryland deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
KORUS-AQ DC-8 Aircraft Remotely Sensed Differential Absorption Lidar (DIAL) Data
KORUSAQ_AircraftRemoteSensing_DIAL_DC8_Data features remotely sensed data collected by the Differential Absorption Lidar (DIAL) onboard the DC-8 aircraft during the KORUS-AQ field campaign. Ozone and various lidar properties are measurements featured in this collection. Data collection for this product is complete.The KORUS-AQ field study was conducted in South Korea during May-June, 2016. The study was jointly sponsored by NASA and Korea’s National Institute of Environmental Research (NIER). The primary objectives were to investigate the factors controlling air quality in Korea (e.g., local emissions, chemical processes, and transboundary transport) and to assess future air quality observing strategies incorporating geostationary satellite observations. To achieve these science objectives, KORUS-AQ adopted a highly coordinated sampling strategy involved surface and airborne measurements including both in-situ and remote sensing instruments.Surface observations provided details on ground-level air quality conditions while airborne sampling provided an assessment of conditions aloft relevant to satellite observations and necessary to understand the role of emissions, chemistry, and dynamics in determining air quality outcomes. The sampling region covers the South Korean peninsula and surrounding waters with a primary focus on the Seoul Metropolitan Area. Airborne sampling was primarily conducted from near surface to about 8 km with extensive profiling to characterize the vertical distribution of pollutants and their precursors. The airborne observational data were collected from three aircraft platforms: the NASA DC-8, NASA B-200, and Hanseo King Air. Surface measurements were conducted from 16 ground sites and 2 ships: R/V Onnuri and R/V Jang Mok.The major data products collected from both the ground and air include in-situ measurements of trace gases (e.g., ozone, reactive nitrogen species, carbon monoxide and dioxide, methane, non-methane and oxygenated hydrocarbon species), aerosols (e.g., microphysical and optical properties and chemical composition), active remote sensing of ozone and aerosols, and passive remote sensing of NO2, CH2O, and O3 column densities. These data products support research focused on examining the impact of photochemistry and transport on ozone and aerosols, evaluating emissions inventories, and assessing the potential use of satellite observations in air quality studies.
TRACER-AQ JSC G-V Aircraft Remotely Sensed GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS) Data
TRACERAQ_AircraftRemoteSensing_GV_GCAS_Data is the remotely sensed GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS) data collected onboard the Johnson Space Center (JSC) Gulfstream V (G-V) aircraft during the TRacking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) field study. Data collection is complete.The TRacking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign is a field study co-sponsored by NASA and TCEQ (Texas Commission on Environmental Quality), with partners from DOE (Department of Energy) TRacking Aerosol Convection ExpeRiment (TRACER), and several academic institutions. This synergistic effort aims to gain an updated understanding in photochemistry and meteorological impact on ozone formation in the Houston region, particularly around the Houston Ship Channel, Galveston Bay, and the Gulf of America; and provide observations for evaluating air quality models and satellite observations.The primary TRACER-AQ field observations period lasted from mid-August to late September 2021, coinciding with the peak ozone season in East Texas, with a second deployment in summer 2022 with a subset of ground-based assets. The observing system includes airborne remote sensing, mobile (boat/vehicle) laboratories, and stationary ground-based assets.The airborne component was based on the NASA Gulfstream V aircraft instrumented with GCAS (GEOCAPE Airborne Simulator) for making measurements of column NO2 and HCHO as well as a lidar system, HSRL-2 (High Spectral Resolution Lidar-2), to measure O3 and aerosol vertical profiles over the course of 12 flight days. Ground-based assets include ground-based ozone lidars from the Tropospheric Ozone Lidar Network (TOLNet), ceilometers, Pandora spectrometers, AErosol RObotic NETwork (AERONET) remote sensors, ozonesondes, and stationary and mobile laboratories of in situ air quality and meteorological observations. This coordinated observing system provides updated or unseen perspectives in spatial and temporal distribution of the key photochemical species and atmospheric structure information, particularly with a focus on the temporal evolution of observations throughout the daytime in preparation for upcoming geostationary satellite air quality observations.
PEM West B DC-8 Remotely Sensed Differential Absorption Lidar (DIAL) Data
PEM-West-B_AircraftRemoteSensing_DC8_DIAL_Data is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the DC-8 aircraft during the Pacific Exploratory Mission (PEM) West A suborbital campaign. Data collection for this product is completeDuring 1983-2001, NASA conducted a collection of field campaigns as a part of the Global Tropospheric Experiment (GTE) for developing advanced instrumentation to quantify atmospheric trace gases’ sources, sinks, and distribution. Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns (PEM-West) were conducted over the northwestern Pacific region, considered the only major region in the northern hemisphere that is “relatively” free from direct anthropogenic influences. PEM-West was a part of the East Asian/North Pacific Regional Study (APARE). The overarching objectives of PEM-West were 1) to investigate the atmospheric chemistry of ozone (O3) and its precursors over the northwestern Pacific, including the examination of their natural budgets as well as the impact of anthropogenic sources; and 2) to investigate the atmospheric sulfur cycle over the region with emphasis on the relative importance and influence of continental vs marine sulfur sources. The two phases of PEM-West were conducted during differing seasons due to contrasting tropospheric outflow from Asia. The first phase, PEM-West A, was conducted over the western Pacific region off the eastern coast of Asia from September-October 1991, a season characterized by the predominance of flow from mid-Pacific regions. The second phase, PEM-West B, was conducted from February-March 1994, a period characterized by maximum air mass outflow. To accomplish its objectives, the PEM-West campaign deployed the NASA DC-8 aircraft across the northwestern Pacific to gather latitudinal, longitudinal, and vertical profile sampling, as well as extensive sampling in both the marine boundary layer and free troposphere. The aircraft was equipped with a comprehensive suite of in-situ instrument packages for characterization of photochemical precursors, intermediate products, and airmass tracers, including O3, nitric oxide (NO), peroxyacetyl nitrate (PAN), nitrogen oxides (NOy), nonmethane hydrocarbons (NMHCs), hydrogen peroxide (H2O2), acetic acid (CH3OOH), carbon monoxide (CO), and formaldehyde (CH2O). Collectively, these measurements enabled the analyses of the photochemical production/destruction of O3 and the distribution of precursor species. In addition, the DC-8 was equipped with instruments for collecting sulfur measurements, including dimethyl sulfide (DMS), carbonyl sulfide (COS), sulfur dioxide (SO2), and carbon disulfide (CS2). Instruments that collected aerosol composition and microphysical properties were also aboard the DC-8. Both missions deployed a Differential Absorption Lidar (DIAL) system for measurements of O3 vertical profiles above and below the aircraft. One highlight of the project was that flight nine of PEM-West A flew over Typhoon Mireille while it made landfall on the coast of Japan. This allowed for a flight by the DC-8 to study the role of typhoons in the transport of trace gases. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the PEM-West A overview paper and the PEM-West B overview paper. A collection of the publications based on PEM-West A and B observation are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-West Phase A and Pacific Exploratory Mission-West, Phase B (PEM-West B).
DEVOTE UC-12 Aircraft Research Scanning Polarimeter (RSP) Remotely Sensed Data
DEVOTE_AircraftRemoteSensing_UC12_RSP_Data are remotely sensed data collected via the Research Scanning Polarimeter (RSP) onboard the UC-12 aircraft as part of the Development and Evaluation of satellite Validation Tools by Experimenters (DEVOTE) sub-orbital project. Data collection is complete.The Development and Evaluation of satellite Validation Tools by Experimenters (DEVOTE) project investigated aerosols and clouds with the specific goals of satellite validation and the improvement of satellite data retrieval algorithms. Conducted in September and October 2011, DEVOTE scientists collected measurements of aerosols and cloud optical and microphysical properties using airborne sensors over ground sites and along satellite overpasses to demonstrate the use of airborne platforms in future scientific measurement campaigns. These measurements were used to validate and improve satellite data retrieval algorithms from missions including the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission and the Aerosol, Cloud, Ecosystems (ACE) Decadal Survey mission.DEVOTE scientists conducted eleven science flights based at the NASA Langley Research Center throughout the campaign. The flight plans were specifically designed to coordinate with CALIPSO satellite overpasses and to fly over the Aerosol Robotic Network (AERONET) ground network sites. The DEVOTE sampling strategy required two aircraft dedicated to remote sensing and in-situ observations, which flew in coordinated flight patterns. This was implemented through use of the NASA UC-12 and the NASA B-200 airborne platforms. The UC-12 had the following remote sensing payload: the Research Scanning Polarimeter (RSP) and High Spectral Resolution Lidar (HSRL) instruments. The B-200 had an in-situ payload including the Polarized Imaging Nephelometer (PI-Neph), the Diode Laser Hygrometer (DLH), and Langley Aerosol Research Group Experiment (LARGE) instruments for aerosol microphysical and optical properties.DEVOTE was partly funded through the Hands-On Project Experience (HOPE) initiative. HOPE was a NASA development program designed to offer early career scientist opportunities to design, implement, and analyze small missions offering hands-on experience. Opportunities are increasingly limited for principal investigators, program managers, and system engineers to obtain mission life cycle training, and HOPE provides opportunities to those early on in their career or who are transitioning to a different field. Thus, DEVOTE had a focus on providing hands-on training in the mission life cycle to early career scientists in addition to its primary objective of using cloud and aerosol data collected from airborne sensors to validate and improve satellite data retrieval algorithms. Additionally, the information obtained from DEVOTE research was used to prepare for the implementation of ACE.
Dynamics and Chemistry of the Summer Stratosphere Radar and Satellite (Remote Sensing) Data Products
DCOTSS-Radar-Satellite-Data feature the radar and satellite data products for the Dynamics and Chemistry of the Summer Stratosphere sub-orbital campaign. Featured in this product are NEXRAD WSR-88D radar products and GOES-16 and GOES-17 geostationary satellite imagery and derived products. NEXRAD GridRad data were produced at a 10-minute frequency across the contiguous United States to support forecasting and flight planning activities. GridRad data also include volumes of radar reflectivity at horizontal polarization and radial velocity spectrum width, which were primarily used to identify tropopause-overshooting convection. Identified GridRad overshoots, which rely upon ERA5 tropopause heights, are included in separate daily files.Also included are GOES-16 and GOES-17 satellite products. Tropopause-overshooting convection is also identified using GOES visible and infrared geostationary satellite imagery. These products include derived cloud top altitude, convective overshoot probability, and visible texture rating product and are produced in 10-minute intervals. The product domain extends over North America and encompasses most of Mexico and Canada. The satellite overshoot products complement the GridRad products and enable an understanding of overshooting that occurs outside the NEXRAD network. Data collection for this product is ongoing and currently only features the first deployment.Each summer the North American Monsoon Anticyclone (NAMA) dominates the circulation of the North-Western Hemisphere and acts to partially confine and isolate air from the surrounding atmosphere. Strong convective storms in the NAMA regularly reach altitudes deep into the lower stratosphere, with some ascending above 20 km. These storms carry water and pollutants from the troposphere into the otherwise very dry stratosphere, where they can have a significant impact on radiative and chemical processes, potentially including destruction of stratospheric ozone. The Dynamics and Chemistry of the Summer Stratosphere (DCOTSS) field campaign is a NASA Earth Venture Suborbital research project aimed at investigating these thunderstorms. DCOTSS utilizes NASA’s ER-2 aircraft and conducted two ~8-week science deployments based out of Salina, KS spanning early to late summer.
SOLVE II DC-8 Aircraft Remotely Sensed Lidar Data
SOLVE2_AircraftRemoteSensing_DC8_Lidar_Data is the remotely sensed lidar trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II). Data were collected by Differential Absorption Lidar (DIAL) and the Airborne Raman Ozone, Temperature, and Aerosol Lidar (AROTAL). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.
LISTOS NASA Aircraft Remote Sensing Data
LISTOS_AircraftRemoteSensing_NASAAircraft_Data is the Long Island Sound Tropospheric Ozone Study (LISTOS) remote sensing data collected onboard the NASA aircraft during the LISTOS field campaign. This product is a result of a joint effort across multiple agencies, including NASA, NOAA, the EPA Northeast States for Coordinated Air Use Management (NESCAUM), Maine Department of Environmental Protection, New Jersey Department of Environmental Protection, New York State Department of Environmental Conservation and several research groups at universities. Data collection is complete.The New York City (NYC) metropolitan area (comprised of portions of New Jersey, New York, and Connecticut in and around NYC) is home to over 20 million people, but also millions of people living downwind in neighboring states. This area continues to persistently have challenges meeting past and recently revised federal health-based air quality standards for ground-level ozone, which impacts the health and well-being of residents living in the area. A unique feature of this chronic ozone problem is the pollution transported in a northeast direction out of NYC over Long Island Sound. The relatively cool waters of Long Island Sound confine the pollutants in a shallow and stable marine boundary layer. Afternoon heating over coastal land creates a sea breeze that carries the air pollution inland from the confined marine layer, resulting in high ozone concentrations in Connecticut and, at times, farther east into Rhode Island and Massachusetts. To investigate the evolving nature of ozone formation and transport in the NYC region and downwind, Northeast States for Coordinated Air Use Management (NESCAUM) launched the Long Island Sound Tropospheric Ozone Study (LISTOS). LISTOS was a multi-agency collaborative study focusing on Long Island Sound and the surrounding coastlines that continually suffer from poor air quality exacerbated by land/water circulation. The primary measurement observations took place between June-September 2018 and include in-situ and remote sensing instrumentation that were integrated aboard three aircraft, a network of ground sites, mobile vehicles, boat measurements, and ozonesondes. The goal of LISTOS was to improve the understanding of ozone chemistry and sea breeze transported pollution over Long Island Sound and its coastlines. LISTOS also provided NASA the opportunity to test air quality remote sensing retrievals with the use of its airborne simulators (GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS), and Geostationary Trace gas and Aerosol Sensory Optimization (GeoTASO)) for the preparation of the Tropospheric Emissions; Monitoring of Pollution (TEMPO) observations for monitoring air quality from space. LISTOS also helped collaborators in the validation of Tropospheric Monitoring Instrument (TROPOMI) science products, with use of airborne- and ground-based measurements of ozone, NO2, and HCHO.
DISCOVER-AQ Colorado Deployment B-200 Aircraft Remotely Sensed GCAS Data
DISCOVERAQ_Colorado_AircraftRemoteSensing_B200_GCAS_Data contains remotely sensed data collected by the GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS) onboard NASA's B-200 aircraft during the Colorado (Denver) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Colorado deployment, and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
DISCOVER-AQ Texas Deployment B-200 Aircraft Remotely Sensed Airborne Compact Atmospheric Mapper Data
DISCOVERAQ_Texas_AircraftRemoteSensing_B200_ACAM_Data contains remotely sensed data collected by the Airborne Compact Atmospheric Mapper (ACAM) onboard NASA's B-200 aircraft during the Texas (Houston) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Texas deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
DISCOVER-AQ Maryland Deployment UC-12 Aircraft Remotely Sensed High Spectral Resolution Lidar (HSRL) Data
DISCOVERAQ_Maryland_AircraftRemoteSensing_UC12_HSRL_Data contains remotely sensed data collected by the High Spectral Resolution Lidar (HSRL) onboard NASA's UC-12 aircraft during the Maryland deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Maryland deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.