Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
739
datasets available to search
ShareScore release 0.9.0
Dataset results
739 results for “Prints”
Characterisation of electro- and thermophysical properties of materials used in 3D printing
<p>A complex of materials’ properties was measured: electrical conductivity, thermal expansion, thermal conductivity, the density of the materials, and the technical density of construction with porosity.</p>
Resilient 3D-Printed Civil Infrastructure with Ultra-High Performance Engineered Cementitious Composites (UHPECCs)
<p>This study aims to develop and evaluate UHP-ECC materials for 3DP applications. To achieve this, the rheological properties of the cementitious composites were designed to accommodate 3DP functionality. Additionally, this study aimed to evaluate the hardened properties of the 3D-printed UHP-ECCs and compare them to the cast UHP-ECCs. Furthermore, the effect of variables such as sand-to-binder (S/B), fly ash-to-cement ratio (FA/C), and high-range water reducer (HRWR) content on the fresh and hardened properties of the 3D printable mixtures were evaluated. Fresh properties of mixtures were assessed by means of the flowability test, setting time test, and printability test. Hardened properties were assessed utilizing the compressive strength test, uniaxial tensile test, and flexural performance test. Experimental results showed that the flow and setting time of the composites reduced as S/B incremented while having the opposite reaction with an increase in FA/C or HRWR. Additionally, a range of initial spread diameter values from 127 to 136 mm was related to the printable mixtures. Moreover, pseudo-strain-hardening (PSH) behavior was observed for all mixtures during the uniaxial tensile test. It is important to note that mixture FA<sub>67</sub>S/B<sub>1</sub>(2.2) developed in this study, showed an exceptional tensile strain of 2.1%, along with a compressive strength of 91.9 MPa, a tensile strength of 5.3 MPa, and flexural strength of 13.6 MPa. Finally, the printed specimens showed significant anisotropic behavior when compared to cast specimens, displaying a reduction in compressive strength ranging from 14.5% to 37.5% when tested in the perpendicular, longitudinal, and lateral directions, as well as an increment in flexural strength ranging from 4.8% to 11.7% when tested in the perpendicular and lateral directions.</p>
Carboxymethyl starch as a reducing and capping agent in the hydrothermal synthesis of selenium nanostructures for use with 3D-printed hydrogel carrier
<p>The hydrothermal method is a cost-effective and eco-friendly route for preparing various nanomaterials. It can utilize a capping agent, such as a polysaccharide, to govern and define the nanoparticle morphology. Elemental selenium nanostructures (spheres and rods) were synthesized and stabilized using a tailor-made carboxymethyl starch (CMS, degree of substitution = 0.3) under hydrothermal conditions. CMS is particularly convenient because it acts simultaneously as the capping and reducing agent, as verified by several analytical techniques, while the reaction relies entirely on green solvents. Furthermore, the effect of sodium selenite concentration, reaction time, and temperature on the nanoparticle size, morphology, microstructure, and chemical composition was investigated to identify the ideal synthesis conditions. A pilot experiment demonstrated the feasibility of implementing the synthesized nanoparticles into vat photopolymerization 3D-printed hydrogel carriers based on 2-hydroxyethyl methacrylate (HEMA). When submersed into the water, the subsequent particle release was confirmed by dynamic light scattering (DLS), promising great potential for use in bio-3D printing and other biomedical applications.</p>
Clinical and Microbial Study of Reinforced 3D Printed Maxillary Denture Base Resin
ClinicalTrials.gov study NCT06921577. IPD Sharing: NO. Countries: 1. Publications: 1.
Molecular Breath Print of COPD Patients With Exacerbations Despite Triple Inhalational Therapy
ClinicalTrials.gov study NCT04638920. IPD Sharing: Not stated. Countries: 1. Publications: 1.
Comparative Assessment of Thickness Changes in 3D-Printed vs. Custom-Made Mouth Guards for Children in Contact Sports
ClinicalTrials.gov study NCT07000435. IPD Sharing: UNDECIDED. Countries: 1. Publications: 6.
Application of 3D Printing Technique in Small Pulmonary Nodule Localization
ClinicalTrials.gov study NCT02952261. IPD Sharing: UNDECIDED. Countries: 1. Publications: 2.
Customized Bone Allografts by 3D-printing
ClinicalTrials.gov study NCT05700526. IPD Sharing: YES. Countries: 1. Publications: 9.
Assessment of Safety and Performances of a 3D Printed Prosthetic Foot: A Pilot Study
ClinicalTrials.gov study NCT06938087. IPD Sharing: YES. Countries: 1. Publications: 5.
Impact of 3D-Printed and Custom Mouthguards on Speech and Oral Functions in Children Practicing Contact Sports
ClinicalTrials.gov study NCT06972823. IPD Sharing: UNDECIDED. Countries: 1. Publications: 15.
Lumbar Fusion With Nexxt Spine 3D-Printed Titanium Interbody Cages
ClinicalTrials.gov study NCT03647501. IPD Sharing: NO. Countries: 1. Publications: 18.
Three-Dimensional Printing and Three-Dimensional Miniplates in Treatment of Anterior Mandibular Fractures
ClinicalTrials.gov study NCT06898736. IPD Sharing: NO. Countries: 1. Publications: 3.
Smartphone and 3D Printing Based Home Rehabilitation System for Chronic Stroke
ClinicalTrials.gov study NCT04363944. IPD Sharing: YES. Countries: 1. Publications: 2.
Bridging the analog divide: A comparison of printed X-ray films and digital images when using computer-aided detection software for tuberculosis screening
Open the record for dataset details and reuse information.
Data from: A 3D-printed capillary tube holder for high-throughput chemotaxis assays
Open the record for dataset details and reuse information.
Data from: Evaluation of the Laguerre-Gaussian mode purity produced by 3D-printed microwave spiral phase plates
Open the record for dataset details and reuse information.
Data from: Using 3D modeling and printing to study avian cognition from different geometric dimensions
Open the record for dataset details and reuse information.
Data from: Osmia3DNest – novel designed 3D printed artificial nest for solitary cavity-nesting bees
Open the record for dataset details and reuse information.
Roll-to-roll, high-resolution 3D printing of shape-specific particles
Open the record for dataset details and reuse information.
Assessing the use of 3D printed traps to evaluate Hemlock Woolly Adelgid (Hemiptera: Adelgidae) infestation levels
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.