Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
239
datasets available to search
ShareScore release 0.9.0
Dataset results
239 results for “remote sensing data”
NAAMES C-130 Aerosol and Cloud Remote Sensing Data, Version 1
NAAMES_AerosolCloud_AircraftRemoteSensing_Data are remotely sensed cloud, aerosol and ocean optical measurements collected onboard the C-130 aircraft during the North Atlantic Aerosols and Marine Ecosystems Study (NAAMES). NAAMES was a NASA funded Earth-Venture Suborbital (EVS) mission with 4 deployments occurring from 2015-2018.The NASA North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) project was the first NASA Earth Venture – Suborbital mission focused on studying the coupled ocean ecosystem and atmosphere. NAAMES utilizes a combination of ship-based, airborne, autonomous sensor, and remote sensing measurements that directly link ocean ecosystem processes, emissions of ocean-generated aerosols and precursor gases, and subsequent atmospheric evolution and processing. Four deployments coincide with the seasonal cycle of phytoplankton in the North Atlantic Ocean: the Winter Transition (November 5 – December 2, 2015), the Bloom Climax (May 11 – June 5, 2016), the Deceleration Phase (August 30 – September 24, 2017), and the Acceleration Phase (March 20 – April 13, 2018). Ship-based measurements were conducted from the Woods Hole Oceanographic Institution Research Vessel Atlantis in the middle of the North Atlantic Ocean, while airborne measurements were conducted on a NASA Wallops Flight Facility C-130 Hercules that was based at St. John's International Airport, Newfoundland, Canada. Data products in the ASDC archive focus on the NAAMES atmospheric aerosol, cloud, and trace gas data from the ship and aircraft, as well as related satellite and model data subsets. While a few ocean-remote sensing data products (e.g., from the high-spectral resolution lidar) are also included in the ASDC archive, most ocean data products reside in a companion archive at SeaBass.
HDF4 Data Used to Assess Long-Term Access to Remote Sensing Data with Layout Maps, Version 1
Notice to Data Users: The documentation for this data set was provided solely by the Principal Investigator(s) and was not further developed, thoroughly reviewed, or edited by NSIDC. Thus, support for this data set may be limited.This data set consists of a sampling of each type of Hierarchical Data Format version 4 (HDF4) data that are archived at the eight National Aeronautic and Space Administration (NASA) Earth Science Data Centers (ESDCs). The data were sampled for a collaborative study between The HDF Group, the Goddard Earth Sciences Data and Information Services Center (GES-DISC), and the National Snow and Ice Data Center (NSIDC) in order to assess the complex internal byte layout of HDF files. Based on the results of this assessment, methods for producing a map of the layout of the HDF4 files held by NASA were prototyped using a markup-language-based HDF tool. The resulting maps allow a separate program to read the file without recourse to the HDF application programming interface (API). Data products selected for the study, and a table summarizing the results, are available via HTTPS.
DISCOVER-AQ California Deployment B-200 Aircraft Remotely Sensed Airborne Compact Atmospheric Mapper Data
DISCOVERAQ_California_AircraftRemoteSensing_B200_ACAM_Data contains remotely sensed data collected by the Airborne Compact Atmospheric Mapper (ACAM) onboard NASA's B-200 aircraft during the California (San Joaquin Valley) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the California deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
DISCOVER-AQ Texas Deployment B200 Aircraft Remotely Sensed High Spectral Resolution Lidar (HSRL-2) Data
DISCOVERAQ_Texas_AircraftRemoteSensing_B200_HSRL2_Data contains remotely sensed data collected by the High Spectral Resolution Lidar (HSRL-2) onboard NASA's UC-12 aircraft during the Texas (Houston) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Texas deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
TRACE-P DC-8 Remotely Sensed Differential Absorption Lidar (DIAL) Data
TRACE-P_AircraftRemoteSensing_DC8_DIAL_Data is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the DC-8 aircraft during the Transport and Chemical Evolution over the Pacific (TRACE-P) suborbital campaign. Data collection for this product is complete.The NASA TRACE-P mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-P was a multi-organizational campaign with NASA, the National Center for Atmospheric Research (NCAR), and several US universities. TRACE-P deployed its payloads in the Pacific between the months of March and April 2001 with the goal of studying the air chemistry emerging from Asia to the western Pacific. Along with this, TRACE-P had the objective studying the chemical evolution of the air as it moved away from Asia. In order to accomplish its goals, the NASA DC-8 aircraft and NASA P-3B aircraft were deployed, each equipped with various instrumentation. TRACE-P also relied on ground sites, and satellites to collect data. The DC-8 aircraft was equipped with 19 instruments in total while the P-3B boasted 21 total instruments. Some instruments on the DC-8 include the Nephelometer, the GCMS, the Nitric Oxide Chemiluminescence, the Differential Absorption Lidar (DIAL), and the Dual Channel Collectors and Fluorometers, HPLC. The Nephelometer was utilized to gather data on various wavelengths including aerosol scattering (450, 550, 700nm), aerosol absorption (565nm), equivalent BC mass, and air density ratio. The GCMS was responsible for capturing a multitude of compounds in the atmosphere, some of which include CH4, CH3CHO, CH3Br, CH3Cl, CHBr3, and C2H6O. DIAL was used for a variety of measurements, some of which include aerosol wavelength dependence (1064/587nm), IR aerosol scattering ratio (1064nm), tropopause heights and ozone columns, visible aerosol scattering ratio, composite tropospheric ozone cross-sections, and visible aerosol depolarization. Finally, the Dual Channel Collectors and Fluorometers, HPLC collected data on H2O2, CH3OOH, and CH2O in the atmosphere. The P-3B aircraft was equipped with various instruments for TRACE-P, some of which include the MSA/CIMS, the Non-dispersive IR Spectrometer, the PILS-Ion Chromatograph, and the Condensation particle counter and Pulse Height Analysis (PHA). The MSA/CIMS measured OH, H2SO4, MSA, and HNO3. The Non-dispersive IR Spectrometer took measurements on CO2 in the atmosphere. The PILS-Ion Chromatograph recorded measurements of compounds and elements in the atmosphere, including sodium, calcium, potassium, magnesium, chloride, NH4, NO3, and SO4. Finally, the Condensation particle counter and PHA was used to gather data on total UCN, UCN 3-8nm, and UCN 3-4nm. Along with the aircrafts, ground stations measured air quality from China along with C2H2, C2H6, CO, and HCN. Finally, satellites imagery was used to collect a multitude of data, some of the uses were to observe the history of lightning flashes, SeaWiFS cloud imagery, 8-day exposure to TOMS aerosols, and SeaWiFS aerosol optical thickness. The imagery was used to best aid in planning for the aircraft deployment.
KORUS-AQ B200 Remotely Sensed Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) Data
KORUSAQ_AircraftRemoteSensing_GeoTASO_B200_Data are remotely sensed data collected by the Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) instrument onboard the B200 aircraft during the KORUS-AQ field campaign. NO2 and HCHO trace gas slant column data are featured in this collection. Data collection for this product is complete.The KORUS-AQ field study was conducted in South Korea during May-June, 2016. The study was jointly sponsored by NASA and Korea’s National Institute of Environmental Research (NIER). The primary objectives were to investigate the factors controlling air quality in Korea (e.g., local emissions, chemical processes, and transboundary transport) and to assess future air quality observing strategies incorporating geostationary satellite observations. To achieve these science objectives, KORUS-AQ adopted a highly coordinated sampling strategy involved surface and airborne measurements including both in-situ and remote sensing instruments.Surface observations provided details on ground-level air quality conditions while airborne sampling provided an assessment of conditions aloft relevant to satellite observations and necessary to understand the role of emissions, chemistry, and dynamics in determining air quality outcomes. The sampling region covers the South Korean peninsula and surrounding waters with a primary focus on the Seoul Metropolitan Area. Airborne sampling was primarily conducted from near surface to about 8 km with extensive profiling to characterize the vertical distribution of pollutants and their precursors. The airborne observational data were collected from three aircraft platforms: the NASA DC-8, NASA B-200, and Hanseo King Air. Surface measurements were conducted from 16 ground sites and 2 ships: R/V Onnuri and R/V Jang Mok.The major data products collected from both the ground and air include in-situ measurements of trace gases (e.g., ozone, reactive nitrogen species, carbon monoxide and dioxide, methane, non-methane and oxygenated hydrocarbon species), aerosols (e.g., microphysical and optical properties and chemical composition), active remote sensing of ozone and aerosols, and passive remote sensing of NO2, CH2O, and O3 column densities. These data products support research focused on examining the impact of photochemistry and transport on ozone and aerosols, evaluating emissions inventories, and assessing the potential use of satellite observations in air quality studies.
PEM West A DC-8 Remotely Sensed Differential Absorption Lidar (DIAL) Data
PEM-West-A_AircraftRemoteSensing_DC8_DIAL_Data is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the DC-8 aircraft during the Pacific Exploratory Mission (PEM) West A suborbital campaign. Data collection for this product is complete.During 1983-2001, NASA conducted a collection of field campaigns as a part of the Global Tropospheric Experiment (GTE) for developing advanced instrumentation to quantify atmospheric trace gases’ sources, sinks, and distribution. Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns (PEM-West) were conducted over the northwestern Pacific region, considered the only major region in the northern hemisphere that is “relatively” free from direct anthropogenic influences. PEM-West was a part of the East Asian/North Pacific Regional Study (APARE). The overarching objectives of PEM-West were 1) to investigate the atmospheric chemistry of ozone (O3) and its precursors over the northwestern Pacific, including the examination of their natural budgets as well as the impact of anthropogenic sources; and 2) to investigate the atmospheric sulfur cycle over the region with emphasis on the relative importance and influence of continental vs marine sulfur sources. The two phases of PEM-West were conducted during differing seasons due to contrasting tropospheric outflow from Asia. The first phase, PEM-West A, was conducted over the western Pacific region off the eastern coast of Asia from September-October 1991, a season characterized by the predominance of flow from mid-Pacific regions. The second phase, PEM-West B, was conducted from February-March 1994, a period characterized by maximum air mass outflow. To accomplish its objectives, the PEM-West campaign deployed the NASA DC-8 aircraft across the northwestern Pacific to gather latitudinal, longitudinal, and vertical profile sampling, as well as extensive sampling in both the marine boundary layer and free troposphere. The aircraft was equipped with a comprehensive suite of in-situ instrument packages for characterization of photochemical precursors, intermediate products, and airmass tracers, including O3, nitric oxide (NO), peroxyacetyl nitrate (PAN), nitrogen oxides (NOy), nonmethane hydrocarbons (NMHCs), hydrogen peroxide (H2O2), acetic acid (CH3OOH), carbon monoxide (CO), and formaldehyde (CH2O). Collectively, these measurements enabled the analyses of the photochemical production/destruction of O3 and the distribution of precursor species. In addition, the DC-8 was equipped with instruments for collecting sulfur measurements, including dimethyl sulfide (DMS), carbonyl sulfide (COS), sulfur dioxide (SO2), and carbon disulfide (CS2). Instruments that collected aerosol composition and microphysical properties were also aboard the DC-8. Both missions deployed a Differential Absorption Lidar (DIAL) system for measurements of O3 vertical profiles above and below the aircraft. One highlight of the project was that flight nine of PEM-West A flew over Typhoon Mireille while it made landfall on the coast of Japan. This allowed for a flight by the DC-8 to study the role of typhoons in the transport of trace gases. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the PEM-West A overview paper and the PEM-West B overview paper. A collection of the publications based on PEM-West A and B observation are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-West Phase A and Pacific Exploratory Mission-West, Phase B (PEM-West B).
PEM Tropics A DC-8 Remotely Sensed Differential Absorption Lidar (DIAL) Data
PEM-Tropics-A_AircraftRemoteSensing_DC8_DIAL_Data is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the DC-8 aircraft during the Pacific Exploratory Mission (PEM) Tropics A suborbital campaign. Data collection for this product is complete.From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns were focused on the tropical Pacific region (PEM-Tropics) which was recognized as a “very large chemical vessel.” The overarching science objective was to assess the anthropogenic impact on tropospheric oxidizing power. A secondary objective was to investigate the impact of atmospheric sulfur chemistry, including oxidation of marine biogenic emission of dimethyl sulfide (DMS) on aerosol loading and radiative effect, which is of critical importance in the assessment of global climate change. The PEM-Tropics mission was conducted in two phases to contrast the influence of biomass burning in the dry season and the “relatively clean” wet season. The first, PEM-Tropics A, was carried out during the end of the dry season (August-September 1996), and the second, PEM-Topics B, was conducted during the wet season (March-April 1999). To accomplish its objectives, PEM-Tropics enlisted the NASA DC-8 and P-3B aircrafts to carry out longitudinal and latitudinal surveys at various altitudes as well as vertical profile sampling across the Pacific basin. Both aircrafts were equipped with in-situ instruments measuring hydroperoxyl radicals (HOx), ozone (O3), photochemical precursors (including, reactive nitrogen species and non-methane hydrocarbon species), and intermediate products (e.g., hydrogen peroxide (H2O2), formaldehyde (CH2O), and acetic acid (CH3OOH). The P3-B in-situ instrument payload also included a direct measurement of hydroxyl (OH) for both missions, while the OH and hydroperoxyl radical (HO2) measurements were added to DC-8 aircraft for PEM-Tropics B. Taking advantage of its excellent low altitude capability, the P-3B was instrumented with a comprehensive sulfur measurement package and conducted pseudo-Lagragian sampling for evaluating DMS oxidation chemistry, including measurements of DMS, sulfur dioxide (SO2), sulfuric acid (H2SO4), and methylsulfonic acid (MSA) as well as the first airborne measurement of dimethyl sulfoxide (DMSO) during PEM-Tropics B. More importantly, it was the first time that DMS (the source), OH and O3 (primary oxidants), and products (DMSO, MSA, H2SO4, SO2) were measured simultaneously aboard an aircraft in the tropical pacific. These observations, specifically DMSO, presented a substantial challenge to the DMS oxidation kinetics to this day. The DC-8 aircraft was equipped with the Differential Absoprtion Lidar (DIAL) during PEM-Tropics A, and the differential absorption lidars DIAL and LASE during PEM-Tropics B. These lidars provided real-time information for fine tuning the flight tracks to capture sampling opportunities. The lidar data products themselves provide valuable information of vertical profiles of ozone as well as aerosol and water vapor in tropical Pacific Furthermore, both aircrafts were fitted with instruments for aerosol composition and microphysical property measurements. Detailed description related to the motivation, implementation, and instrument payloads are available in the PEM-Tropics A overview paper and the PEM-Tropics B overview paper. Most of the publications based on PEM-Tropics A and B observations are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-Tropics A and NASA Global Tropospheric Experiment Pacific Exploratory Mission in the Tropics Phase B: Measurement and Analyses (PEM-Tropics B), while other publications such as Nowak et al. (2001) were published prior to the special issues.
SOLVE II DC-8 Aircraft Remotely Sensed Trace Gas Data
SOLVE2_TraceGas_AircraftRemoteSensing_DC8_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II). Data were collected by the Gas and Aerosol Measurement Sensor/Langley Airborne A-Band Spectrometer (GAMS/LAABS). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.
SOLVE I DC-8 Aircraft Remotely Sensed Trace Gas Data
SOLVE1_TraceGas_AircraftRemoteSensing_DC8_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE). Data were collected by the Airborne Submillimeter Radiometer (ASUR) instrument. Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.
PEM Tropics B P-3B Remotely Sensed Data
PEM-Tropics-B_AircraftRemoteSensing_P3B_Data is the remote sensing data collected onboard the P-3B aircraft during the Pacific Exploratory Mission (PEM) Tropics B suborbital campaign. Data from actinometers and the Scanning Actinic Flux Spectroradiometer (SAFS) are featured in this collection. Data collection for this product is complete.From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns were focused on the tropical Pacific region (PEM-Tropics) which was recognized as a “very large chemical vessel.” The overarching science objective was to assess the anthropogenic impact on tropospheric oxidizing power. A secondary objective was to investigate the impact of atmospheric sulfur chemistry, including oxidation of marine biogenic emission of dimethyl sulfide (DMS) on aerosol loading and radiative effect, which is of critical importance in the assessment of global climate change. The PEM-Tropics mission was conducted in two phases to contrast the influence of biomass burning in the dry season and the “relatively clean” wet season. The first, PEM-Tropics A, was carried out during the end of the dry season (August-September 1996), and the second, PEM-Topics B, was conducted during the wet season (March-April 1999). To accomplish its objectives, PEM-Tropics enlisted the NASA DC-8 and P-3B aircrafts to carry out longitudinal and latitudinal surveys at various altitudes as well as vertical profile sampling across the Pacific basin. Both aircrafts were equipped with in-situ instruments measuring hydroperoxyl radicals (HOx), ozone (O3), photochemical precursors (including, reactive nitrogen species and non-methane hydrocarbon species), and intermediate products (e.g., hydrogen peroxide (H2O2), formaldehyde (CH2O), and acetic acid (CH3OOH). The P3-B in-situ instrument payload also included a direct measurement of hydroxyl (OH) for both missions, while the OH and hydroperoxyl radical (HO2) measurements were added to DC-8 aircraft for PEM-Tropics B. Taking advantage of its excellent low altitude capability, the P-3B was instrumented with a comprehensive sulfur measurement package and conducted pseudo-Lagragian sampling for evaluating DMS oxidation chemistry, including measurements of DMS, sulfur dioxide (SO2), sulfuric acid (H2SO4), and methylsulfonic acid (MSA) as well as the first airborne measurement of dimethyl sulfoxide (DMSO) during PEM-Tropics B. More importantly, it was the first time that DMS (the source), OH and O3 (primary oxidants), and products (DMSO, MSA, H2SO4, SO2) were measured simultaneously aboard an aircraft in the tropical pacific. These observations, specifically DMSO, presented a substantial challenge to the DMS oxidation kinetics to this day. The DC-8 aircraft was equipped with the Differential Absoprtion Lidar (DIAL) during PEM-Tropics A, and the differential absorption lidars DIAL and LASE during PEM-Tropics B. These lidars provided real-time information for fine tuning the flight tracks to capture sampling opportunities. The lidar data products themselves provide valuable information of vertical profiles of ozone as well as aerosol and water vapor in tropical Pacific Furthermore, both aircrafts were fitted with instruments for aerosol composition and microphysical property measurements. Detailed description related to the motivation, implementation, and instrument payloads are available in the PEM-Tropics A overview paper and the PEM-Tropics B overview paper. Most of the publications based on PEM-Tropics A and B observations are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-Tropics A and NASA Global Tropospheric Experiment Pacific Exploratory Mission in the Tropics Phase B: Measurement and Analyses (PEM-Tropics B), while other publications such as Nowak et al. (2001) were published prior to the special issues.
An Advanced Learning Framework for High Dimensional Multi-Sensor Remote Sensing Data Project
<p> Improve the use of land cover data by developing an advanced framework for robust classification using multi-source datasets:<br /> Develop, validate and optimize a generalized multi-kernel, active learning (MKL-AL) pattern recognition framework for multi-source data fusion.<br /> Develop both single- and ensemble-classifier versions (MKL-AL and Ensemble-MKL-AL) of the system.<br /> Utilize multi-source remotely sensed and in situ data to create land-cover classification and perform accuracy assessment with available labeled data; utilize first results to query new samples that, if inducted into the training of the system, will significantly improve classification performance and accuracy.<br /> &nbsp;</p>
SEAC4RS ER-2 Aircraft Remotely Sensed Research Scanning Polarimeter Aerosol and Cloud Data
SEAC4RS_AircraftRemoteSensing_RSP_ER2_Data are remotely sensed data collected by the Research Scanning Polarimeter (RSP) onboard the ER-2 aircraft during the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEA4CRS) airborne field study. Data collection for this product is complete.Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) airborne field study was conducted in August and September of 2013. The field operation was based in Houston, Texas. The primary SEAC4RS science objectives are: to determine how pollutant emissions are redistributed via deep convection throughout the troposphere; to determine the evolution of gases and aerosols in deep convective outflow and the implications for UT/LS chemistry; to identify the influences and feedbacks of aerosol particles from anthropogenic pollution and biomass burning on meteorology and climate through changes in the atmospheric heat budget (i.e., semi-direct effect) or through microphysical changes in clouds (i.e., indirect effects); and lastly, to serve as a calibration and validation test bed for future satellite instruments and missions.The airborne observational data were collected from three aircraft platforms: the NASA DC-8, ER-2, and SPEC LearJet. Both the NASA DC-8 and ER-2 aircraft were instrumented for comprehensive in-situ and remote sensing measurements of the trace gas, aerosol properties, and cloud properties. In addition, radiative fluxes and meteorological parameters were also recorded. The NASA DC-8 was mostly responsible for tropospheric sampling, while the NASA ER-2 was operating in the lower stratospheric regime. The SPEC LearJet was dedicated to in-situ cloud characterizations. To accomplish the science objectives, the flight plans were designed to investigate the influence of biomass burning and pollution, their temporal evolution, and ultimately, impacts on meteorological processes which can, in turn, feedback on regional air quality. With respect to meteorological feedbacks, the opportunity to examine the impact of polluting aerosols on cloud properties and dynamics was of particular interest.
Tropical Ozone Transport Experiment – Vortex Ozone Transport Experiment (TOTE-VOTE) DC-8 Remotely Sensed Lidar Data
TOTE-VOTE_AircraftRemoteSensing_DC8_Lidar_Data_1 is the remotely sensed Raman Lidar data collected onboard the DC-8 aircraft during the Tropical Ozone Transport Experiment – Vortex Ozone Transport Experiment (TOTE-VOTE) campaign. Methane and water vapor data are featured in this dataset. Data collection is complete.The Tropical Ozone Transport Experiment – Vortex Ozone Transport Experiment (TOTE-VOTE) campaign was conducted by NASA from December 1995 to February 1996. TOTE-VOTE took place in the Pacific region with the goal of gaining a better understanding of background transport processes from tropical/polar regions to midlatitudes. Nineteen flights were conducted using the NASA DC-8 aircraft and balloon sondes with the purpose of measuring the transport of filaments of air moved in or out of the arctic polar vortex and the tropical stratospheric reservoir. TOTE-VOTE also utilized ground-based instruments along with aircrafts.Various instrumentation was used during TOTE-VOTE in order to achieve the mission objectives. The DC-8 aircraft was equipped with the NCAR NOxyO3 instrument, the NASA Langley Airborne Differential Absorption Lidar (DIAL) system, the Forward Scattering Spectrometer Probe (FSSP), the Microwave Temperature Profiler (MTP), the Multiple-Angle Aerosol Spectrometer Probe (MASP), and the diode laser spectrometer system, historically known as the Differential Absorption Carbon monOxide Measurement (DACOM). The NCAR NOxyO3 is a type of 4-channel chemiluminescence instrument that was used to quantify NOx (NO and NO2), NOy (total reactive nitrogen), and ozone (O3) in the air. The DIAL system used four lasers to make DIAL O3 profiles, along with collecting data on aerosol backscattering, aerosol depolarization ratio, aerosol extinction, and aerosol optical depth. The FSSP is an optical particle counter that measured particle size distribution. The MTP is a passive microwave radiometer that measured natural thermal emissions and was used during TOTE-VOTE to record temperature. The MASP spectrometer collected in-situ measurements of particle concentration, particle size distribution, and particle extinction. Along with the MASP’s in-situ measurements, the DACOM spectrometer utilized three diode lasers at different wavelengths to take in-situ measurements of N2O, CO, CH4, and CO2 for TOTE-VOTE. Ground-based instruments collected lidar data while balloon sondes gathered information on wind direction, wind speed, atmospheric pressure, and air temperature.
ACTIVATE King Air Aerosol and Cloud Remotely Sensed Data
ACTIVATE_AerosolCloud_AircraftRemoteSensing_KingAir_Data is the aerosol and cloud data collected onboard the B-200 King Air aircraft via remote sensing instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project is a five-year project (January 2019-December 2023) that will provide important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studies the atmosphere over the western North Atlantic and samples its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air will primarily be used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements will also be onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic are planned through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy is implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.
ACEPOL Cloud Physics Lidar (CPL) Remotely Sensed Data Version 1
ACEPOL Cloud Physics Lidar (CPL) Remotely Sensed Data (ACEPOL_AircraftRemoteSensing_CPL_Data) are remotely sensed measurements collected by the Cloud Physics Lidar (CPL) onboard the ER-2 during ACEPOL. In order to improve our understanding of the effect of aerosols on climate and air quality, measurements of aerosol chemical composition, size distribution, height profile, and optical properties are of crucial importance. In terms of remotely sensed instrumentation, the most extensive set of aerosol properties can be obtained by combining passive multi-angle, multi-spectral measurements of intensity and polarization with active measurements performed by a High Spectral Resolution Lidar. During Fall 2017, the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) campaign, jointly sponsored by NASA and the Netherlands Institute for Space Research (SRON), performed aerosol and cloud measurements over the United States from the NASA high altitude ER-2 aircraft. Six instruments were deployed on the aircraft. Four of these instruments were multi-angle polarimeters: the Airborne Hyper Angular Rainbow Polarimeter (AirHARP), the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI), the Airborne Spectrometer for Planetary Exploration (SPEX Airborne) and the Research Scanning Polarimeter (RSP). The other two instruments were lidars: the High Spectral Resolution Lidar 2 (HSRL-2) and the Cloud Physics Lidar (CPL). The ACEPOL operation was based at NASA’s Armstrong Flight Research Center in Palmdale California, which enabled observations of a wide variety of scene types, including urban, desert, forest, coastal ocean and agricultural areas, with clear, cloudy, polluted and pristine atmospheric conditions. The primary goal of ACEPOL was to assess the capabilities of the different polarimeters for retrieval of aerosol and cloud microphysical and optical parameters, as well as their capabilities to derive aerosol layer height (near-UV polarimetry, O2 A-band). ACEPOL also focused on the development and evaluation of aerosol retrieval algorithms that combine data from both active (lidar) and passive (polarimeter) instruments. ACEPOL data are appropriate for algorithm development and testing, instrument intercomparison, and investigations of active and passive instrument data fusion, which make them valuable resources for remote sensing communities as they prepare for the next generation of spaceborne MAP and lidar missions.
DISCOVER-AQ California Deployment B-200 Aircraft Remotely Sensed High Spectral Resolution Lidar (HSRL-2) Data
DISCOVERAQ_California_AircraftRemoteSensing_B200_HSRL_Data contains remotely sensed data collected by the High Spectral Resolution Lidar (HSRL-2) onboard NASA's B-200 aircraft during the California (San Joaquin Valley) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Maryland deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
ACEPOL Airborne Spectrometer for Planetary Exploration (AirSPEX) Remotely Sensed Data Version 1
ACEPOL_AircraftRemoteSensing_AirSPEX_Data are remotely sensed measurements collected by the Airborne Spectrometer for Planetary Exploration (SPEX Airborne) onboard the ER-2 during the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) campaign. In order to improve our understanding of the effect of aerosols on climate and air quality, measurements of aerosol chemical composition, size distribution, height profile, and optical properties are of crucial importance. In terms of remotely sensed instrumentation, the most extensive set of aerosol properties can be obtained by combining passive multi-angle, multi-spectral measurements of intensity and polarization with active measurements performed by a High Spectral Resolution Lidar. During Fall 2017, the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) campaign, jointly sponsored by NASA and the Netherlands Institute for Space Research (SRON), performed aerosol and cloud measurements over the United States from the NASA high altitude ER-2 aircraft. Six instruments were deployed on the aircraft. Four of these instruments were multi-angle polarimeters: the Airborne Hyper Angular Rainbow Polarimeter (AirHARP), the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI), the Airborne Spectrometer for Planetary Exploration (SPEX Airborne) and the Research Scanning Polarimeter (RSP). The other two instruments were lidars: the High Spectral Resolution Lidar 2 (HSRL-2) and the Cloud Physics Lidar (CPL). The ACEPOL operation was based at NASA’s Armstrong Flight Research Center in Palmdale California, which enabled observations of a wide variety of scene types, including urban, desert, forest, coastal ocean and agricultural areas, with clear, cloudy, polluted and pristine atmospheric conditions. The primary goal of ACEPOL was to assess the capabilities of the different polarimeters for retrieval of aerosol and cloud microphysical and optical parameters, as well as their capabilities to derive aerosol layer height (near-UV polarimetry, O2 A-band). ACEPOL also focused on the development and evaluation of aerosol retrieval algorithms that combine data from both active (lidar) and passive (polarimeter) instruments. ACEPOL data are appropriate for algorithm development and testing, instrument intercomparison, and investigations of active and passive instrument data fusion, which make them valuable resources for remote sensing communities as they prepare for the next generation of spaceborne MAP and lidar missions.
NAAMES C-130 Ocean Remote Sensing Data, Version 1
NAAMES_Ocean_AircraftRemoteSensing_Data are remotely sensed ocean measurements collected onboard the C-130 aircraft during the North Atlantic Aerosols and Marine Ecosystems Study (NAAMES). These measurements were collected from November 4, 2015 – November 29, 2015, May 11, 2016 – June 5, 2016 and August 30, 2017-September 22, 2017 over the North Atlantic Ocean. The primary objective of NAAMES was to resolve key processes controlling ocean system function, their influences on atmospheric aerosols and clouds and their implications for climate. The airborne products link local-scale processes and properties to the larger scale continuous satellite record. Related ocean property measurements are available in the NAAMES_AerosolCloud_AircraftRemoteSensing_Data_1. Data collection for this product is complete.The NASA North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) project was the first NASA Earth Venture – Suborbital mission focused on studying the coupled ocean ecosystem and atmosphere. NAAMES utilizes a combination of ship-based, airborne, autonomous sensor, and remote sensing measurements that directly link ocean ecosystem processes, emissions of ocean-generated aerosols and precursor gases, and subsequent atmospheric evolution and processing. Four deployments coincide with the seasonal cycle of phytoplankton in the North Atlantic Ocean: the Winter Transition (November 5 – December 2, 2015), the Bloom Climax (May 11 – June 5, 2016), the Deceleration Phase (August 30 – September 24, 2017), and the Acceleration Phase (March 20 – April 13, 2018). Ship-based measurements were conducted from the Woods Hole Oceanographic Institution Research Vessel Atlantis in the middle of the North Atlantic Ocean, while airborne measurements were conducted on a NASA Wallops Flight Facility C-130 Hercules that was based at St. John's International Airport, Newfoundland, Canada. Data products in the ASDC archive focus on the NAAMES atmospheric aerosol, cloud, and trace gas data from the ship and aircraft, as well as related satellite and model data subsets. While a few ocean-remote sensing data products (e.g., from the high-spectral resolution lidar) are also included in the ASDC archive, most ocean data products reside in a companion archive at SeaBass.
Supporting Data for Remote Sensing of Bonneville Salt Flats Groundwater Depth Study | Radwin et al 2024
<p>Supporting files for "Multispectral Satellite Based Monitoring of Groundwater Depth at the Bonneville Salt Flats" by Mark Radwin, Brenda Bowen, and Jeremiah Bernau</p> <p>Included data:</p> <ul> <li>Supplemental figures</li> <li>Bonneville Salt Flats piezometer data</li> <li>Bonneville Salt Flats geochemical (brine density) data</li> <li>Landsat Halite Index values at piezometer locations</li> <li>Landast groundwater depth transect data</li> <li>Sentinel-2 Halite Index values at piezometer locations</li> <li>Analysis spreadsheet of images with groundwater depth values above 0</li> <li>Palmer Drought Severity Index (PDSI) data for the BSF region</li> </ul>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.