Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
342
datasets available to search
ShareScore release 0.9.0
Dataset results
342 results for “Solar Wind”
PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPAN-A Electron Pitch Angle Distributions, Level 3 (L3), 13.981 s Data
* SPAN-Electron, SPAN-E, Instrument SPE Level 3 Data* --------------------------------------------------File Naming Format: psp_swp_spa_sf0_l3_pad_YYYYMMDD_v01.cdfThis data product contains measurements of the Electron Pitch Angle Distribution from the SPAN-A instrument.* Parker Solar Probe SWEAP Rules of the Road* ------------------------------------------As part of the development of collaboration with the broader Heliophysics community, the mission has drafted a "Rules of the Road" to govern how PSP instrument data are to be used.* 1) Users should consult with the PI to discuss the appropriate use of instrument data or model results and to ensure that the users are accessing the most recently available versions of the data and of the analysis routines. Instrument team Science Operations Centers, SOCs, and/or Virtual Observatories, VOs, should facilitate this process serving as the contact point between PI and users in most cases.* 2) Users should heed the caveats of investigators to the interpretations and limitations of data or model results. Investigators supplying data or models may insist that such caveats be published. Data and model version numbers should also be specified.* 3) Browse products, Quicklook, and Planning data are not intended for science analysis or publication and should not be used for those purposes without consent of the PI.* 4) Users should acknowledge the sources of data used in all publications, presentations, and reports: "We acknowledge the NASA Parker Solar Probe Mission and the SWEAP team led by J. Kasper for use of data.".* 5) Users are encouraged to provide the PI a copy of each manuscript that uses the PI data prior to submission of that manuscript for consideration of publication. On publication, the citation should be transmitted to the PI and any other providers of data.
APOLLO 15 ALSEP/SWS SOLAR WIND 28-SEC RESOLUTION TABLES V1.0
This data set contains daily tables of time ordered, 28-second-resolution plasma parameters, mainly of the solar wind, as observed on the Moon at the Apollo 15 ALSEP site by the Apollo 15 Solar Wind Spectrometer from 31 July 1971 through 30 June 1972.
STEREO-A In-Situ Measurements of Particles and CME Transients (IMPACT) Solar Wind Electron Analyzer (SWEA) 3-Dimensional Electron Distributions, Burst Mode, Level 1 (L1), 2 s Data
The file contains Level 1 3D electron distributions in burst mode from the In-situ Measurements of Particles and CME Transients, IMPACT, SWEA instrument on the STEREO Ahead spacecraft. For important usage caveats see https://cdaweb.gsfc.nasa.gov/stereo_swea_caveats.html.
NEW HORIZONS SWAP SOLAR WIND DERIVED CHARACTERISTICS V1.0
This data set presents characteristics of the solar wind derived from the New Horizons Solar Wind Around Pluto (SWAP) experiment from observations obtained during cruise, Pluto encounter (excluding the period inside the Pluto system), and afterwards. The single data file the time information for a given pair of sweeps, original level 2 data file reference, the solar wind speed proton density, proton speed, proton temperature, proton dynamic pressure, proton thermal pressure, spacecraft position and speed in Heliographic Inertial (HGI), Heliocentric Aries ecliptic, and Heliographic (Carrington) coordinates.
PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPAN-A Alpha Particle Distribution Function, Partial Moments, Instrument Frame, Level 3 (L3), 14 s Data
SPI Level 3 Data----------------File Naming Format: psp_swp_spi_sf0a_l3_mom_inst_YYMMDDDD_v01.cdfThis data product contains measurements of partial moments of the alpha particle distribution function in the instrument frame of reference. Users should be aware that the full ion distribution is typicaly not in the field of view, FOV, of the SPAN Ion instrument.Parker Solar Probe SWEAP Rules of the Road------------------------------------------As part of the development of collaboration with the broader Heliophysics community, the mission has drafted a "Rules of the Road" to govern how PSP instrument data are to be used.* 1) Users should consult with the PI to discuss the appropriate use of instrument data or model results and to ensure that the users are accessing the most recently available versions of the data and of the analysis routines. Instrument team Science Operations Centers, SOCs, and/or Virtual Observatories, VOs, should facilitate this process serving as the contact point between PI and users in most cases.* 2) Users should heed the caveats of investigators to the interpretations and limitations of data or model results. Investigators supplying data or models may insist that such caveats be published. Data and model version numbers should also be specified.* 3) Browse products, Quicklook, and Planning data are not intended for science analysis or publication and should not be used for those purposes without consent of the PI.* 4) Users should acknowledge the sources of data used in all publications, presentations, and reports: "We acknowledge the NASA Parker Solar Probe Mission and the SWEAP team led by J. Kasper for use of data.".* 5) Users are encouraged to provide the PI a copy of each manuscript that uses the PI data prior to submission of that manuscript for consideration of publication. On publication, the citation should be transmitted to the PI and any other providers of data.
PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPC Ion Number Density, Velocity, and Thermal Speed Momemts and Fits, Level 3 (L3), 0.2185 s Data
SPC Level 3 Ion Data--------------------File Naming Format: psp_swp_spc_l3i_YYYYMMDD_v01.cdfThis data product contains derived measurements of ion properties in the solar wind, including those for density, temperature, and velocity. These are determined both by a direct computation of the velocity moments of the reduced distribution function and by attempting to fit the primary peak in the ion I(V) curve with a Maxwellian model. These measurements correspond one to one with spectra in the psp_swp_spc_l2i file for the same date. It may be convenient for some applications to cross-reference the two. For example, the corresponding l3i file contains ephemeris and data quality flag information that may be useful for an investigator who is concerned only with l2i type measurements.Conditions that impact measurement quality are documented in the DQF variable, which contains a 32 element flag array for each measurement time. Each element of the array is reserved to signify a specific condition. These conditions are described in the DQF_FLAGNAMES variable. In this version, for example, DQF_FLAGNAMES.DAT[23] is set to "spacecraft maneuver". If measurement "i" was made during a spacecraft maneuver, it is thus flagged with DQF.DAT[23,i] = 1.In Version 01, measurements are not provided, i.e. variables are set to fill, during spacecraft maneuvers, under conditions of low signal-to-noise, and during certain observed transients. Such conditions are rare during encounters, but increasingly frequent in interplanetary cruise. These conditions are documented in the DQF variable. Remarks are also provided in the "SPC Reduced Data Quality Periods" table. In Version 01, the solar wind alpha particle component is not measured. Thus, variables are set equal to fill values.SPC Encounter 1 Remarks-----------------------Data quality is very good for the duration of the encounter. The solar wind flow was within the optimal field of view for the SPC instrument for nearly the entire encounter. See the data flags for specific exceptions. As with all encounters, signal-to-noise is higher during ingress than egress, which is reflected in the typically smaller uncertainties and less frequent "primary peak low signal" flag events.SPC Cruise Phase Remarks------------------------Measurements recorded during cruise phase are not all transmitted to Earth. The typical return is one spectrum out of every 32.SPC Encounter 2 Remarks-----------------------Due to an erroneous setting in the operating mode for this encounter, ion full scan spectra and certain spectra immediately following ion full scans are of reduced quality. In the affected full scan spectra, the energy steps over an initial portion of the measurement spectra have zero width, i.e. the Level 2 ion variables MV_LO.DAT = MV_HI.DAT, and the corresponding measurements are purely noise. In some cases, this results in a poor determination of the proton "primary peak" energy, which renders additional subsequent full scans that follow subject to the same incompleteness. In other cases, the energy range for the subsequent "ion peak tracking mode" scan is not ideal. The affected Level 3 ion measurements have been flagged with DQF.DAT[22]=1, which stands for "energy ranging/peak tracking error" and/or set to fill. The operating mode has been revised such that future encounters will not be so affected.Parker Solar Probe SWEAP Rules of the Road------------------------------------------As part of the development of collaboration with the broader Heliophysics community, the mission has drafted a "Rules of the Road" to govern how PSP instrument data are to be used.* 1) Users should consult with the PI to discuss the appropriate use of instrument data or model results and to ensure that the users are accessing the most recently available versions of the data and of the analysis routines. Instrument team Science Operations Centers, SOCs, and/or Virtual Observatories, VOs, should facilitate this process serving as the contact point between PI and users in most cases.* 2) Users should heed the caveats of investigators to the interpretations and limitations of data or model results. Investigators supplying data or models may insist that such caveats be published. Data and model version numbers should also be specified.* 3) Browse products, Quicklook, and Planning data are not intended for science analysis or publication and should not be used for those purposes without consent of the PI.* 4) Users should acknowledge the sources of data used in all publications, presentations, and reports: "We acknowledge the NASA Parker Solar Probe Mission and the SWEAP team led by J. Kasper for use of data.".* 5) Users are encouraged to provide the PI a copy of each manuscript that uses the PI data prior to submission of that manuscript for consideration of publication. On publication, the citation should be transmitted to the PI and any other providers of data.
MARS EXPRESS ASPERA-3 IMA SOLAR WIND PARAMETERS V1.0
This data set contains Mars Express ASPERA-3 IMA solar wind parameters from January 1, 2004 to December 31, 2018.
Venus Solar Wind Interactions Data
This bundle contains the data presented in Brecht, S. H. and S. A. Ledvina, An explanation of the nightside ionospheric structure of Venus, JGR, 2020.
NEW HORIZONS SWAP DERIVED SOLAR WIND AT PLUTO V1.0
This data set presents characteristics of the solar wind derived from data taken by the New Horizons Solar Wind Around Pluto (SWAP) instrument during the Pluto encounter. This archive contains two data products. Each product compiles the CODMAC level 2 source data used, the solar wind speed, proton density, proton speed, proton temerature, proton dynamic pressure, proton thermal pressure, spacecraft position and speed. The two product files differ in that one is in Heliographic Inertial (HGI) coordinates and the other is in Pluto centric J2000 and IAU J2000 coordinates.
PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPAN-B Electron Energy Spectra, Level 2 (L2), 1.74 s Data
SPAN-E Level 2 ELectron Energy Spectra Data-------------------------------------------File Naming Format: psp_swp_spb_sf1_L2_32E_YYYYMMDD_v01.cdfThe SF1 product is an energy spectrum produced on the spacecraft by summing over the Theta and Phi directions. The units are differential energy flux and eV. The sample filename above includes 32 Energies.The larger Theta angles (deflection angles) are artificially enhanced in the "sf1" energy spectra data products due to the method of spectra production on the SPAN-E instrument (straight summing). Thus, SF1 energy spectra are not recommended for rigid statistical analysis.Parker Solar Probe SWEAP Solar Probe Analyzer, SPAN, Electron Data Release Notes--------------------------------------------------------------------------------November 19, 2019 Initial Data Release--------------------------------------Overview of Measurements------------------------The SWEAP team is pleased to release the data from Encounter 1 and Encounter 2. The files contain data from the time range October 31, 2018 - June 18, 2019.The prime mission of Parker Solar Probe is to take data when within 0.25 AU of the Sun during its orbit. However, there has been some extended campaign measurements outside of this distance. The data are available for those days that are within 0.25 AU as well as those days when the instruments were operational outside of 0.25 AU.Each SWEAP data file includes a set of a particular type of measurements over a single observing day. Measurements are provided in Common Data Format (CDF), a self-documenting data framework for which convenient open source tools exist across most scientific computing platforms. Users are strongly encouraged to consult the global metadata in each file, and the metadata that are linked to each variable. The metadata includes comprehensive listings of relevant information, including units, coordinate systems, qualitative descriptions, measurement uncertainties, methodologies, links to further documentation, and so forth.SPAN-E Level 2 Version 01 Release Notes---------------------------------------The SPAN-Ae and SPAN-B instruments together have fields of view covering >90% of the sky; major obstructions to the FOV include the spacecraft heat shield and other intrusions by spacecraft components. Each individual SPAN-E has FOV of ±60° in Theta and 240° in Phi. The rotation matrices to convert into the spacecraft frame can be found in the individual CDF files, or in the instrument paper.This data set covers all periods for which the instrument was turned on and taking data in the solar wind in ion mode. This includes maneuvers affecting the spacecraft attitude and orientation. Measurements taken by SPAN-B when the spacecraft is pointed away from the sun are taken in sunlight.The data quality flags for the SPAN data can be found in the CDF files as: QUALITY_FLAG (0=good, 1=bad)General Remarks for Version 01 Data-----------------------------------Users interested in field-aligned electrons should take care regarding potential blockages from the heat shield when B is near radial, especially in SPAN-Ae. Artificial reductions in strahl width can result.Due to the relatively high electron temperature in the inner heliosphere, many secondary electrons are generated from spacecraft and instrument surfaces. As a result, electron measurements in this release below 30 eV are not advised for scientific analysis.The fields of view in SPAN-Ae and SPAN-B have many intrusions by the spacecraft, and erroneous pixels discovered in analysis, in particular near the edges of the FOV, should be viewed with skepticism. Details on FOV intrusion are found in the instrument paper, forthcoming, or by contacting the SPAN-E instrument scientist.The instrument mechanical attentuators are engaged during the eight days around perihelia 1 and perihelia 2, which results in a factor of about 10 reduction of the total electron flux into the instrument. During these eight days, halo electron measurements are artificially enhanced in the L2 products as a result of the reduced instrument geometric factor and subsequent ground corrections.A general note for Encounter 1 and Encounter 2 data: a miscalculation in the deflection tables loaded to both SPAN-Ae and SPAN-B resulted in over-deflection of the outermost Theta angles during these encounters. As such, pixels at large Thetas should be ignored. This error was corrected by a table upload prior to Encounter 3.Lastly, when viewing time gaps in the SPAN-E measurements, be advised that the first data point produced by the instrument after a power-on is the maximum value permitted by internal instrument counters. Therefore, the first data point after powerup is erroneous and should be discarded, as indicated by quality flags.SPAN-E Encounter 1 Remarks--------------------------SPAN-E operated nominally for the majority of the first encounter. Exceptions to this include: a few instances of corrupted, higher-energy sweep tables, and an inst
Wind SMS Suite SupraThermal Ion Composition Spectrometer (SMS/STICS) Ion Angular Flux Maps (AFMs), Level 2 (L2), 30-minute Data in Solar Wind
The data include Wind STICS 30-minute Angular Flux Maps (AFMs) for selected ion species using triple coincidence (H+, He+, He2+, C5+, O+, O6+, and Fe10+) and double coincidence (H+, He+, He2+, O+, O6+) measurements in the solar wind. AFMs give the flow direction of the measured plasma divided into 48 velocity vector components ranging over sixteen azimuthal sectors and three elevation bins. AFMs are formed by integrating the VDFs over E/q. For details, see https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf.The Suprathermal Ion Composition Spectrometer (STICS) is a time of flight (TOF) plasma mass spectrometer, capable of identifying mass and mass per charge for incident ions up to 200 keV/e. It uses an electrostatic analyzer to admit ions of a particular energy per charge (E/Q) into the TOF chamber. The E/Q voltage is stepped through 32 values, sitting at each value for approximately 24 sec., to measure ions over the full E/Q range of 6 - 200 keV/e. Ions then pass through a carbon foil and TOF chamber, before finally impacting on a solid-state detector (SSD) for energy measurement. STICS combines these three measurements of E/Q, TOF and residual energy, producing PHA words. This triple-coincidence technique greatly improves the signal to noise ratio in the data. Measurements of E/Q and TOF without residual energy also produce PHA words. These double-coincidence measurements are characterized by better statistics since ions whose energy does not allow them to be registered by the SSD can still be counted in double-coincidence measurements. However, ion identification in double-coincidence measurements are limited to a select number of ions that are well separated in E/Q - TOF space. The STICS instrument provides full 3D velocity distribution functions, through a combination of multiple telescopes and spacecraft spin. The instrument includes 3 separate TOF telescopes that view 3 separate latitude sectors, as shown in Figure 1 (https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf). In addition, the WIND spacecraft spins, allowing the 3 telescopes to trace out a nearly 4π steradian viewing area. The longitudinal sectors are shown in Figure 2. The solar direction is in sectors 8-10 while the earthward direction is in sectors 0-2.
STEREO-A In-Situ Measurements of Particles and CME Transients (IMPACT) Solar Wind Electron Analyzer (SWEA) 3-Dimensional Electron Distributions, Level 1 (L1), 30 s Data
The file contains Level 1 3D electron distributions from the In-situ Measurements of Particles and CME Transients, IMPACT, SWEA instrument on the STEREO Ahead spacecraft. For important usage caveats see https://cdaweb.gsfc.nasa.gov/stereo_swea_caveats.html.
SOHO Charge, Element, and Isotope Analysis System (CELIAS) Proton Monitor (PM) 30-second Solar Wind Data in CDF Format
The data include 30-second proton speed, density, most probable thermal speed, and arrival direction, as well as predicted alpha-particle speed. Also included are the SOHO spacecraft predicted positon in GSE coordinates, Heliocentric Range, Heliographic Latitude and Longitude, and Earth Carrington Rotation Number. This CDF dataset was converted from the original ASCII dataset at the SOHO Archive https://soho.nascom.nasa.gov/data/archive.html. Description of the CELIAS-PM instrument and scientific scope can be found on the CELIAS instrument home page http://www2.physik.uni-kiel.de/SOHO-CELIAS/ and on the SOHO mission home page https://sohowww.nascom.nasa.gov/. CELIAS Instrument Publication: Hovestadt, D., Hilchenbach, M., Bürgi, A. et al. CELIAS - Charge, Element and Isotope Analysis System for SOHO, Sol Phys 162, 441–481 (1995), https://doi.org/10.1007/BF00733436.
PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPAN-B Full 3D Electron Spectra, Level 2 (L2), 14 s Data
SPAN-E Level 2 Electron Full 3D Spectra Data--------------------------------------------File Naming Format: psp_swp_spb_sf0_L2_16Ax8Dx32E_YYYYMMDD_v01.cdfThe SF0 products are the Full 3D Electron spectra from each individual SPAN-E instrument, SPAN-Ae and SPAN-B. Units are in differential energy flux, degrees, and eV. One spectrum comprises decreasing steps in Energy specified by the number in the filename, alternating sweeps in Theta/Deflection, also specified by the number in the filename, and a number of Phi/Anode directions, also specified by the number in the filename. The sample filename above includes 16 Anodes, 8 Deflections, and 32 Energies.This data set covers all periods for which the instrument was turned on and taking data in the solar wind in "Full Sweep", normal cadence survey mode. This includes maneuvers affecting the spacecraft attitude and orientation. Measurements taken by SPAN-B during cruise phase periods when the spacecraft is pointed away from the sun are taken in sunlight.Parker Solar Probe SWEAP Solar Probe Analyzer, SPAN, Electron Data Release Notes--------------------------------------------------------------------------------November 19, 2019 Initial Data Release--------------------------------------Overview of Measurements------------------------The SWEAP team is pleased to release the data from Encounter 1 and Encounter 2. The files contain data from the time range October 31, 2018 - June 18, 2019.The prime mission of Parker Solar Probe is to take data when within 0.25 AU of the Sun during its orbit. However, there has been some extended campaign measurements outside of this distance. The data are available for those days that are within 0.25 AU as well as those days when the instruments were operational outside of 0.25 AU.Each SWEAP data file includes a set of a particular type of measurements over a single observing day. Measurements are provided in Common Data Format (CDF), a self-documenting data framework for which convenient open source tools exist across most scientific computing platforms. Users are strongly encouraged to consult the global metadata in each file, and the metadata that are linked to each variable. The metadata includes comprehensive listings of relevant information, including units, coordinate systems, qualitative descriptions, measurement uncertainties, methodologies, links to further documentation, and so forth.SPAN-E Level 2 Version 01 Release Notes---------------------------------------The SPAN-Ae and SPAN-B instruments together have fields of view covering >90% of the sky; major obstructions to the FOV include the spacecraft heat shield and other intrusions by spacecraft components. Each individual SPAN-E has FOV of ±60° in Theta and 240° in Phi. The rotation matrices to convert into the spacecraft frame can be found in the individual CDF files, or in the instrument paper.This data set covers all periods for which the instrument was turned on and taking data in the solar wind in ion mode. This includes maneuvers affecting the spacecraft attitude and orientation. Measurements taken by SPAN-B when the spacecraft is pointed away from the sun are taken in sunlight.The data quality flags for the SPAN data can be found in the CDF files as: QUALITY_FLAG (0=good, 1=bad)General Remarks for Version 01 Data-----------------------------------Users interested in field-aligned electrons should take care regarding potential blockages from the heat shield when B is near radial, especially in SPAN-Ae. Artificial reductions in strahl width can result.Due to the relatively high electron temperature in the inner heliosphere, many secondary electrons are generated from spacecraft and instrument surfaces. As a result, electron measurements in this release below 30 eV are not advised for scientific analysis.The fields of view in SPAN-Ae and SPAN-B have many intrusions by the spacecraft, and erroneous pixels discovered in analysis, in particular near the edges of the FOV, should be viewed with skepticism. Details on FOV intrusion are found in the instrument paper, forthcoming, or by contacting the SPAN-E instrument scientist.The instrument mechanical attentuators are engaged during the eight days around perihelia 1 and perihelia 2, which results in a factor of about 10 reduction of the total electron flux into the instrument. During these eight days, halo electron measurements are artificially enhanced in the L2 products as a result of the reduced instrument geometric factor and subsequent ground corrections.A general note for Encounter 1 and Encounter 2 data: a miscalculation in the deflection tables loaded to both SPAN-Ae and SPAN-B resulted in over-deflection of the outermost Theta angles during these encounters. As such, pixels at large Thetas should be ignored. This error was corrected by a table upload prior to Encounter 3.Lastly, when viewing time gaps in the SPAN-E measurements, be advised that the first data point produced by the instrument after a power-on is th
ACE SWEPAM Solar Wind Weimer Propagated 60 s Resolution Data in GSE Coordinates
ACE Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution SWEPAM data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
Preprocessed Wind and Solar Potential
<p>All NetCDF files we create have the following global attributes:</p> <p>ds.attrs[‘SOURCE’] = [the name of the program (.R or .py or .ipynb file) you used to create the file]</p> <p>ds.attrs[‘AUTHOR’] = [the person who created the file]</p> <p>ds.attrs[‘DESCRIPTION’] = [a short description of the file]</p> <p>Filenames follow the following format: </p> <p>[variable name]_[frequency]_[model name]_[experiment name]_[ensemble number]_[timeframe]_[optional descriptive suffix].nc</p> <p> </p> <p><strong><span>Variables:</span></strong></p> <p><span>wpp:</span> wind power potential</p> <p><span>spp:</span> solar power potential</p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>
Reducing transmission expansion by co-optimizing sizing of wind, solar, storage, and grid connection capacity: Raw Data
<p>This dataset contained an older and out-of-date version of all GenX model input and results data relevant to the working paper ‘Reducing transmission expansion by co-optimizing sizing of wind, solar, storage, and grid connection capacity.’ The data for the more recent version of the paper can be found here: https://zenodo.org/records/13340214. </p>
VOYAGER 1 SOLAR WIND PLS 1 HOUR AVERAGES V1.0
Voyager 1 plasma data of the solar wind, 1 hour averages.
VG1 SAT PLS DERIVED ION SOLAR WIND 96SEC V1.0
not applicable
P11 SATURN SOLAR WIND CPI CRUISE 1 HOUR COUNT DATA V1.0
Pioneer 11 cruise Charged Particle Instrument (CPI) 1 hour count data.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.