Find research datasets worth reusing

Quarterly porewater salinity and conductivity measurements from the GCE-LTER Seawater Addition Long-Term Experiment (SALTEx) Project

The Georgia Coastal Ecosystems LTER Seawater Addition Long-Term Experiment (SALTEx) is a large-scale field experiment designed to simulate saltwater intrusion in a tidal freshwater wetland to predict how chronic (Press) and acute (Pulse) salinization will affect this and other tidal freshwater ecosystems. Thirty porewater well samples were collected every 2-3 months from all 30 treatment plots using a peristalsis pump. Salinity, conductivity and water temperature were measured from the samples using a handheld conductivity/salinity meter.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2015 through 31-Dec-2015

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2015 through 31-Dec-2015. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

SALTEx soil oxidation-reduction (redox) potential measurements from the GCE LTER Seawater Addition Long-Term Experiment (SALTEx) between July 2016 and March 2017

SALTEx (Seawater Addition Long-Term Experiment) is a field experiment designed to simulate saltwater intrusion in a tidal freshwater wetland to predict how chronic (Press) and acute (Pulse) salinization will affect this and other tidal freshwater ecosystems. The SALTEx experiment was initiated in 2012 and consists of 31 field plots , each 2.5 m on a side. There are three treatments (Press, Pulse, and Fresh) and two types of controls (with and without sides), each consisting of six replicates. The Press treatment plots receive regular (4 times each week) additions of a mixture of seawater and fresh river water. Pulse plots receive the same mixture of seawater and river water during September and October, which is historically a time of low flow in the river when natural saltwater intrusion occurs. The Fresh treatment plots receive regular additions of fresh river water. Treatment water is added during low tide to facilitate its infiltration into the soil, and all plots are inundated by astronomical tides at high tide. Response measurements include porewater chemistry, specifically concentrations of chloride, sulfate, sulfide, dissolved organic carbon (DOC), ammonium-N, nitrate/nitrite-N, dissolved reactive phosphorus, total phosphorus, total nitrogen, organic nitrogen, carbon:nitrogen ratio, organic-carbon:organic-nitrogen ratio, and pH.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2016 through 31-Dec-2016

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2016 through 31-Dec-2016. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.