Find research datasets worth reusing

Continuous groundwater well temperature, salinity and water level measurements at the GCE-LTER Seawater Addition Long-Term Experiment (SALTEx) site from May 2014 to February 2018

The Georgia Coastal Ecosystems LTER Seawater Addition Long-Term Experiment (SALTEx) is a large-scale field experiment designed to simulate saltwater intrusion in a tidal freshwater wetland to predict how chronic (Press) and acute (Pulse) salinization will affect this and other tidal freshwater ecosystems. In order to characterize groundwater salinity, temperature, and plot flooding following experimental manipulation, unvented water pressure, temperature and conductivity were continuously measured in a PVC groundwater well installed at the SALTEx site. Measurements were made at the bottom of the well using a submerged Schlumberger CTD-Diver logger every 15 minutes from 30-May-2014 to 14-Feb-2018. In February 2016 a second CTD-Diver was deployed near the top of the well. Data were downloaded from the loggers using Diver Office communication software, then imported into MATLAB for post-processing, quality control and documentation. Raw, unvented pressure readings were corrected for atmospheric pressure and sensor height from the bottom of the well to generate corrected pressure readings, then water level, salinity and density were calculated from the measured variables using UNESCO algorithms. These data were collected as part of the Georgia Coastal Ecosystems LTER SALTEx project (http://gce-lter.marsci.uga.edu/public/app/send_project_eml.asp?id=73), and will be updated annually.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program. Note that measurements from 10-Mar-2017 through 22-Jun-2017 had to be interpolated to create a monotonic time series due to a clock offset error made when deploying the data logger.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program. Note that measurements from 10-Mar-2017 through 26-Jun-2017 had to be interpolated to create a monotonic time series due to a clock offset error made when deploying the data logger.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program. Note that measurements from 10-Mar-2017 through 23-Jun-2017 had to be interpolated to create a monotonic time series due to a clock offset error made when deploying the data logger.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

openCC (other)Oct 2020View details →

DOM composition changes in Altamaha River and Sapelo Sound estuaries measured by FT-ICR mass spectrometry from September 2015 to September 2016

Dissolved organic matter (DOM) is a large and complex mixture of compounds with source inputs that differ with location, season and environmental conditions. Here, we investigated drivers of DOM composition changes in a marsh-dominated estuary off the southeastern U.S. Monthly water samples were collected at a riverine and estuarine site from September 2015 to September 2016, and bulk, optical, and molecular analyses were conducted on samples before and after dark incubations. Results showed that river discharge was the primary driver changing the DOM composition at the mouth of the Altamaha River. For discharge higher than ~ 150 m3 s-1, DOC concentrations and the terrigenous character of the DOM increased approximately linearly with river flow. For low discharge conditions, a clear signature of salt marsh-derived compounds was observed in the river. At the head of Sapelo Sound, changes in DOM composition were primarily driven by river discharge and possibly by summer algae blooms. Microbial consumption of DOC was larger during periods of high discharge at both sites, potentially due to the higher mobilization and influx of fresh material to the system. The Georgia coast was hit by Hurricane Matthew in October 2016, which resulted in a large input of carbon to the estuary. The DOC concentration was ~ 2 times higher and DOM composition was more aromatic with a stronger terrigenous signature compared to the seasonal maximum observed earlier in the year during peak river discharge conditions. This suggests that extreme events notably impact DOM quantity and quality in estuarine regions.

openCustomJan 2020View details →

Porewater measurements of dissolved nutrients (ammonia, nitrate/nitrite, phosphate) from core monitoring sites in the GCE-LTER domain following hurricane Irma from October 2017 to October 2018.

To access the effect of hurricane Irma on the GCE domain, porewater samples were collected to evaluate porewater nutrient concentrations at four core GCE monitoring sites (7, 8, 9 and 11). A limited number of samples were collected in October 2017 (a month after the storm surge from hurricane Irma hit the east coast of the United States) and then all sites were sampled in Nov 2017 and in Jan, Feb, Apr and Oct 2018. Porewater samples were obtained from approximately 10 cm depth using Rhizon samplers and then analyzed for ammonium, nitrate + nitrite, and phosphate concentrations.

openCustomSep 2021View details →

Porewater chemistry measurements from the GCE-LTER Seawater Addition Long-Term Experiment (SALTEx) from July 2017 through July 2019.

The Georgia Coastal Ecosystems LTER Seawater Addition Long-Term Experiment (SALTEx) is a large-scale field experiment designed to simulate saltwater intrusion in a tidal freshwater wetland to predict how chronic (Press) and acute (Pulse) salinization will affect this and other tidal freshwater ecosystems. The SALTEx experiment was initiated in 2012 and consists of 31 field plots, each 2.5 m on a side. There are three treatments (Press, Pulse, and Fresh) and two types of controls (with and without sides), each consisting of six replicates. The Press treatment plots receive regular (4 times each week) additions of a mixture of seawater and fresh river water. Pulse plots receive the same mixture of seawater and river water during September and October, which is historically a time of low flow in the river when natural saltwater intrusion occurs. The Fresh treatment plots receive regular additions of fresh river water. Treatment water is added during low tide to facilitate its infiltration into the soil, and all plots are inundated by astronomical tides at high tide. Response measurements include porewater chemistry, specifically concentrations of chloride, sulfate, sulfide, dissolved organic carbon (DOC), ammonium-N, nitrate/nitrite-N, dissolved reactive phosphorus, total phosphorus, total nitrogen, organic nitrogen, carbon:nitrogen (C:N) ratio, organic-carbon:organic-nitrogen ratio, and pH. Samples of source water were taken after collection (seawater, river water) or mixing (mixed seawater and river water in tanks) and analyzed for concentrations of dissolved reactive phosphorus, total phosphorus, ammonium-N, nitrate/nitrite-N, total nitrogen, organic nitrogen. Source water samples from 2016 and beyond also included measurements of dissolved organic carbon (DOC), carbon:nitrogen ratio, organic-carbon:organic-nitrogen ratio, chloride and sulfate.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.