Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
412
datasets available to search
ShareScore release 0.7.1
Dataset results
412 results for “sensor data”
PSP FIELDS Digital Fields Board (DFB) AC-coupled Searchcoil Magnetometer, SCM, Cross Spectra, d-component, e-component, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board (DFB), XXX ⨯ YYY cross spectra data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC cross spectra data for a pair of input channels consist of:* 1) Power spectral densities (auto spectra, e.g. FT₁ ⨯ FT₁*)* 2) Real and imaginary parts of the spectral cross term (FT₁ ⨯ FT₂*)* 3) Coherence* 4) Phasewhere all as a function of frequency and time. The last two terms are describedcoherence and phase are defined in [3].These cross spectra are averaged in both frequency and time as described in [3]. The cross spectra have either 56 or 96 bins (selectable) with the bin central frequencies reported in the metadata. The AC cross spectra are duty-cycled such that spectral averaging takes place over the first 1/8 of any given NYs (assuming a 1 NYs data cadence). Less data are averaged by 2^N for cadences faster than 1 NYs by 2^N. For cadences slower than 1 NYs, the first 1/8 of each NYs of data included are averaged together to form the reported data.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz. The units for phase are degrees.The Level 2 voltage data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer cross spectra data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field cross spectra data are expressed by using search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates to [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]For some orbits, sufficient spectral information exists in the auto spectra and cross spectra to determine wave ellipticity, planarity, and wave normal angles. One method for accomplishing this is presented in reference [4].Time resolution of the DFB AC cross spectral data can vary by multiples of 2^N. During encounter (when PSP is within 0.25 AU of the Sun), cadence for the DFB AC cross spectra is typically 1 NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344* 4) Santolik, O., Parrot, M., Lefeuvre, F. Radio Science (2003), 38, 1010. https://doi.org/10.1029/2000RS002523
PSP FIELDS Digital Fields Board (DFB) DC-coupled Differential Voltage, V1-V2 Antennae, Dipole Mode, Spectra, High Gain, Sensor coordinates, Level 2 (L2), 6.99054 s Data
PSP FIELDS Digital Fields Board, DFB, dV12hg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB DC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB DC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB DC spectra data cadence is typically 30 NYseconds NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
PSP FIELDS Digital Fields Board (DFB) DC-coupled Searchcoil Magnetometer, SCM, Cross Spectra, d-component, f-component, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board (DFB), SCMXlfhg ⨯ SCMXlfhg cross spectra data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB DC cross spectra data for a pair of input channels consist of:* 1) Power spectral densities (auto spectra, e.g. FT₁ ⨯ FT₁*)* 2) Real and imaginary parts of the spectral cross term (FT₁ ⨯ FT₂*)* 3) Coherence* 4) Phasewhere all as a function of frequency and time. The last two terms are describedcoherence and phase are defined in [3].These cross spectra are averaged in both frequency and time as described in [3]. The cross spectra have either 56 or 96 bins (selectable) with the bin central frequencies reported in the metadata.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz. The units for phase are degrees.The Level 2 voltage data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer cross spectra data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field cross spectra data are expressed by using search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates to [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]For some orbits, sufficient spectral information exists in the auto spectra and cross spectra to determine wave ellipticity, planarity, and wave normal angles. One method for accomplishing this is presented in reference [4].Time resolution of the DFB DC cross spectral data can vary by multiples of 2^N. During encounter (when PSP is within 0.25 AU of the Sun), cadence for the DFB DC cross spectra is typically 30 NYseconds [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344* 4) Santolik, O., Parrot, M., Lefeuvre, F. Radio Science (2003), 38, 1010. https://doi.org/10.1029/2000RS002523
PSP FIELDS Digital Fields Board (DFB) AC-coupled Searchcoil Magnetometer, SCM, Spectra, Low Frequency, High Gain, d-component, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, SCMdlfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata. The AC spectra are duty-cycled such that spectral averaging takes place over the first 1/8 of any given NYsecond when the data cadence is equal to one NYsecond. Less data are averaged by a factor of 2^N for data cadences that are faster than one NYsecond by 2^N. For cadences slower than one NYsecond, the first 1/8 of each NYsecond of data included are averaged together to construct the reported data.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB AC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC spectra data cadence is typically NYsecond NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
CASSINI E/J/S/SW MIMI INCA SENSOR UNCALIBRATED DATA V1.1
The Cassini Magnetospheric Imaging Instrument(MIMI) Imaging Neutral Camera (INCA) uncalibrated data set includes all data collected from the MIMI Data Processing Unit during the mission. The original data has been decommutated and decoded by software at the Applied Physics Laboratory (APL) and has been then further ordered and filtered by software at Fundamental Technologies, LLC. The data is provided in an uncalibrated form in conjunction with a PDS MIMI calibration volume COMIMI_0000 which provides specific algorithms for the derivation of calibrated data. This data set includes uncalibrated values of counts in the form of rates and of rate images for the INCA sensor for all times during the mission including the Earth flyby, the Jupiter flyby, interplanetary cruise, and the entire Saturn tour. Data are presented in a set of tables which are of variable length and use a comma to separate various fields. This data set is intended to be the most comprehensive and complete data set included in the Cassini MIMI INCA archive. A browse data set is included with Key Parameter data that is calibrated using the algorithms provided in the Calibration volume. In addition, a series of images are provided with the KP browse data that displays the KP data which can lead the user to the particular times of interest. This data set should be among the first used by a user of any of the MIMI INCA archive as it will lead one to information required to search for more detailed or highly specialized features in the original data.
PSP FIELDS Digital Fields Board (DFB) AC-coupled V5 Antenna Voltage, Monopole Mode, Auto Spectra, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, V5 data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata. The AC spectra are duty-cycled such that spectral averaging takes place over the first 1/8 of any given NYsecond when the data cadence is equal to one NYsecond. Less data are averaged by a factor of 2^N for data cadences that are faster than one NYsecond by 2^N. For cadences slower than one NYsecond, the first 1/8 of each NYsecond of data included are averaged together to construct the reported data.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB AC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC spectra data cadence is typically NYsecond NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
MMS 2 Active Spacecraft Potential Control (ASPOC), Sensors 1 and 2, Level 2 (L2), Survey Mode, 1 s Data
MMS 2 Active Spacecraft Potential Control (ASPOC) - Sensors 1 and 2 Ion Beam Current Rates, Beam Energies, and Instrument Status variables. In tenuous plasma regions, the floating potential of a sunlit spacecraft is positively charged, reaching up to tens of Volts. The corresponding electric field disturbs the ambient plasma measurements obtained from electron and ion sensors and the large fluxes of attracted photo-electrons can significantly reduce the lifetime of the micro-channel plate. The electric field measurements can be also contaminated by the high spacecraft potential values. The Active Spacecraft Potential Control neutralizes the spacecraft potential by releasing positively charged Indium ions. The ASPOCs neutralize the electrical potential of the spacecraft, limiting or eliminating spurious electric fields that can contaminate measurements. This allows observations of the more scientifically important low-energy ions and electrons.
PSP FIELDS Digital Fields Board (DFB) DC-coupled Differential Voltage, V3-V4 Antennae, Dipole Mode, Bandpass filtered, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, dV34 data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB DC bandpass data consist of peak and average values of the absolute value of bandpassed time series waveform data over a time interval equal to the reporting cadence. The DC bandpass data have the peak response frequency of each bin reported in the metadata. The frequency response curves for these bins are given in [3].The Level 2 data products contained in this data file have been calibrated for:* 1) The ~6.3 dB loss associated with forming the bandpass signal, see reference [3]* 2) DFB in-band gain* 3) The search coil preamplifier response, when applicable* 4) DFB digital filter time delays, the DFB filter time delays become significant in the lowest frequency DC bandpass binsCalibrations for the DFB digital filter gains and analog filter gains have not been implemented as it was determined that these could not be applied accurately to single numerical values representing a broadband signal response and because all bins except the highest frequency bin have a flat gain response equal to one due to these filters. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts. Likewise, all magnetic field quantities when present in these Level 2 data products are expressed by using units of nanoTelsas.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements and [u,v,w] for the searchcoil magnetometer.The time resolution of the DFB DC bandpass filtered data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB DC bandpass filtered data cadence is typically 1 NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
MMS 3 Active Spacecraft Potential Control (ASPOC), Sensors 1 and 2, Level 2 (L2), Survey Mode, 1 s Data
MMS 3 Active Spacecraft Potential Control (ASPOC) - Sensors 1 and 2 Ion Beam Current Rates, Beam Energies, and Instrument Status variables. In tenuous plasma regions, the floating potential of a sunlit spacecraft is positively charged, reaching up to tens of Volts. The corresponding electric field disturbs the ambient plasma measurements obtained from electron and ion sensors and the large fluxes of attracted photo-electrons can significantly reduce the lifetime of the micro-channel plate. The electric field measurements can be also contaminated by the high spacecraft potential values. The Active Spacecraft Potential Control neutralizes the spacecraft potential by releasing positively charged Indium ions. The ASPOCs neutralize the electrical potential of the spacecraft, limiting or eliminating spurious electric fields that can contaminate measurements. This allows observations of the more scientifically important low-energy ions and electrons.
PSP FIELDS Digital Fields Board (DFB) AC-coupled Searchcoil Magnetometer, SCM, Spectra, Low Frequency, High Gain, v-component, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, SCMvlfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata. The AC spectra are duty-cycled such that spectral averaging takes place over the first 1/8 of any given NYsecond when the data cadence is equal to one NYsecond. Less data are averaged by a factor of 2^N for data cadences that are faster than one NYsecond by 2^N. For cadences slower than one NYsecond, the first 1/8 of each NYsecond of data included are averaged together to construct the reported data.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB AC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC spectra data cadence is typically NYsecond NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
MMS 4 Electric Particle Detector, Fly's Eye Energetic Particle Sensor (EPD, FEEPS) Electrons, Level 2 (L2), Burst Mode, 0.3025 s Data
Fly's Eye Electron Proton Spectrometer (FEEPS) Burst Data. The Energetic Particle Detector (EPD) investigation aboard the four MMS spacecraft consists of two instrument designs, the FEEPS and the EIS (Energetic Ion Spectrometer). A FEEPS consists of six Heads, each composed of two Eyes. Each eye is a particle telescope with a single silicon detector. There are nine electron eyes and three ion eyes per FEEPS. The energy coverage is from 25 keV to 650 keV for electrons and 45 keV to 650 keV for ions. Each eye has sixteen energy channels, the spacing of which can be modified by command. The fields of view and pointing of each eye are designed to provide a broad, instantaneous field of view for the twelve eyes per FEEPS.
CASSINI E/J/S/SW MIMI INCA SENSOR UNCALIBRATED DATA V1.0
The Cassini Magnetospheric Imaging Instrument(MIMI) Imaging Neutral Camera (INCA) uncalibrated data set includes all data collected from the MIMI Data Processing Unit during the mission. The original data has been decommutated and decoded by software at the Applied Physics Laboratory (APL) and has been then further ordered and filtered by software at Fundamental Technologies, LLC. The data is provided in an uncalibrated form in conjunction with a PDS MIMI calibration volume COMIMI_0000 which provides specific algorithms for the derivation of calibrated data. This data set includes uncalibrated values of counts in the form of rates and of rate images for the INCA sensor for all times during the mission including the Earth flyby, the Jupiter flyby, interplanetary cruise, and the entire Saturn tour. Data are presented in a set of tables which are of variable length and use a comma to separate various fields. This data set is intended to be the most comprehensive and complete data set included in the Cassini MIMI INCA archive. A browse data set is included with Key Parameter data that is calibrated using the algorithms provided in the Calibration volume. In addition, a series of images are provided with the KP browse data that displays the KP data which can lead the user to the particular times of interest. This data set should be among the first used by a user of any of the MIMI INCA archive as it will lead one to information required to search for more detailed or highly specialized features in the original data.
PSP FIELDS Digital Fields Board (DFB) AC-coupled Differential Voltage, V1-V2 Antennae, Dipole Mode, Spectra, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, dV12hg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata. The AC spectra are duty-cycled such that spectral averaging takes place over the first 1/8 of any given NYsecond when the data cadence is equal to one NYsecond. Less data are averaged by a factor of 2^N for data cadences that are faster than one NYsecond by 2^N. For cadences slower than one NYsecond, the first 1/8 of each NYsecond of data included are averaged together to construct the reported data.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB AC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC spectra data cadence is typically NYsecond NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
DMSP F18 Special Sensors-Ions, Electrons, and Scintillation (SSIES) Thermal Plasma Analysis Package, Level 2 (L2), 1 s Data in CDF Format
The Special Sensors-Ions, Electrons, and Scintillation (SSIES) thermal plasma analysis package is a suite of instruments built by the Center for Space Sciences at the University of Texas at Dallas and flown on a number of the DMSP satellites. SSIESS includes a Retarding Potential Analyzer (RPA), Ion Drift meter (IDM), scintillation meter, and Langmuir probe.
PSP FIELDS Digital Fields Board (DFB) DC-coupled Searchcoil Magnetometer, SCM, Spectra, Low Frequency, High Gain, e-component, Sensor coordinates, Level 2 (L2), 6.99054 s Data
PSP FIELDS Digital Fields Board, DFB, SCMelfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB DC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB DC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB DC spectra data cadence is typically 30 NYseconds NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
PSP FIELDS Digital Fields Board (DFB) AC-coupled Searchcoil Magnetometer, SCM, Spectra, Low Frequency, High Gain, e-component, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, SCMelfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata. The AC spectra are duty-cycled such that spectral averaging takes place over the first 1/8 of any given NYsecond when the data cadence is equal to one NYsecond. Less data are averaged by a factor of 2^N for data cadences that are faster than one NYsecond by 2^N. For cadences slower than one NYsecond, the first 1/8 of each NYsecond of data included are averaged together to construct the reported data.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB AC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC spectra data cadence is typically NYsecond NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
PSP FIELDS Digital Fields Board (DFB) DC-coupled Searchcoil Magnetometer, SCM, Spectra, Low Frequency, High Gain, f-component, Sensor coordinates, Level 2 (L2), 6.99054 s Data
PSP FIELDS Digital Fields Board, DFB, SCMflfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB DC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB DC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB DC spectra data cadence is typically 30 NYseconds NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
MMS 4 Active Spacecraft Potential Control (ASPOC), Sensors 1 and 2, Level 2 (L2), Survey Mode, 1 s Data
MMS 4 Active Spacecraft Potential Control (ASPOC) - Sensors 1 and 2 Ion Beam Current Rates, Beam Energies, and Instrument Status variables. In tenuous plasma regions, the floating potential of a sunlit spacecraft is positively charged, reaching up to tens of Volts. The corresponding electric field disturbs the ambient plasma measurements obtained from electron and ion sensors and the large fluxes of attracted photo-electrons can significantly reduce the lifetime of the micro-channel plate. The electric field measurements can be also contaminated by the high spacecraft potential values. The Active Spacecraft Potential Control neutralizes the spacecraft potential by releasing positively charged Indium ions. The ASPOCs neutralize the electrical potential of the spacecraft, limiting or eliminating spurious electric fields that can contaminate measurements. This allows observations of the more scientifically important low-energy ions and electrons.
CASSINI E/J/S/SW MIMI LEMMS SENSOR UNCALIBRATED DATA V1.0
The Cassini Magnetospheric Imaging Instrument(MIMI) Low Energy Magnetospheric Measurement System (LEMMS) uncalibrated data set includes all data collected from the MIMI Data Processing Unit during the mission. The original data has been decommutated and decoded by software at the Applied Physics Laboratory (APL) and has been then further ordered and filtered by software at Fundamental Technologies, LLC. The data is provided in an uncalibrated form in conjunction with a PDS MIMI calibration volume COMIMI_0000 which provides specific algorithms for the derivation of calibrated data. This data set includes uncalibrated values for each energy channel for the LEMMS sensor for all times during the mission including the Earth flyby, the Jupiter flyby, interplanetary cruise, and the entire Saturn tour. Data are presented in a set of tables which are of variable length and use a comma to separate various fields. This data set is intended to be the most comprehensive and complete data set included in the Cassini MIMI LEMMS archive. A browse data set is included with Key Parameter data that is calibrated using the algorithms provided in the Calibration volume. In addition, a series of images are provided with the KP browse data that displays the KP data which can lead the user to the particular times of interest. This data set should be among the first used by a user of any of the MIMI LEMMS archive as it will lead one to information required to search for more detailed or highly specialized features in the original data.
CASSINI S MIMI INCA SENSOR CALIBRATED DATA V1.0
The Ion and Neutral Camera (INCA) obtains remote images of the global distribution of energetic ions for energies from 7 keV/nucleon to 8 MeV/nucleon, discriminated according to energy and mass species (oxygen and hydrogen). To obtain the images, INCA measures the arrival directions, energy and mass species of Energetic Neutral Atoms (ENA's) using the relatively new technique of ENA imaging. INCA also can be commanded to obtain very high sensitivity ion measurements, providing the angular, energy and species distributions of in-situ O and H ions. The Cassini Magnetospheric Imaging Instrument(MIMI) Imaging Neutral Camera (INCA) calibrated data set includes all image data collected from the MIMI Data Processing Unit during the Saturn tour. The original data has been decommutated, decoded, calibrated and further processed by software at the Applied Physics Laboratory (APL). The calibrated image data is provided in three forms: an averaged form where the original image N x N pixel images pixels intensity are averaged to a single value for one species and time-of-flight (TOF) combination, browse images which display rows and columns of images for one species and TOF combination, and movies which display averaged ENA image skymaps. Calibration of INCA data has been described fully in the Cassini/MIMI Data User Guide. This data set should be among the first used by a user of any of the MIMI INCA archive as it will lead one to information required to search for more detailed or highly specialized features in the original data.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.