Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
35
datasets available to search
ShareScore release 0.7.1
Dataset results
35 results for “Expedition 368X”
IODP Expedition 368X Thin section images
<p>Hard rock and sediment thin section images were acquired using either the JRSO-developed Petrographic Image Capture and Archival Tool (PICAT) imager or (rarely) an upright microscope and a digital camera. Sample images are acquired in unpolarized, polarized, and/or cross-polarized light. Image files are presented compressed by hole.</p>
IODP Expedition 368X Section summary
<p>Report includes data for individual core sections: coring/drilling depths and recovery, database identifiers for the whole section and section halves, and number of samples taken from the section before and after splitting.</p>
IODP Expedition 368X Elemental analysis (CHNS)
<p>Fundamental elemental component (total carbon, hydrogen, nitrogen, and sulfur) fluctuations help define the origin, depositional environment, and diagenetic alteration of source materials. To determine C, H, N, and S, solid samples are reacted with a catalyst, separated by chromatography, and detected by thermal conductivity on a FlashEA 1112 CHNS elemental analyzer. Organic carbon can be directly measured on the elemental analyzer by acidification of the sample to drive off carbonate as carbon dioxide before analyzing. Total organic carbon on this report is measured rather than calculated.</p>
IODP Expedition 368X Sample report
<p>Report includes detailed information about samples taken for testing: location/depth, type/form factor, test, request number, and database identifier.</p>
IODP Expedition 368X Thermal conductivity
<p>Thermal conductivity was measured using the heated needle method in either full-space needle configuration (soft/saturated sediments) or half-space needle configuration (harder materials) of a TeKa Berlin TK-04 thermal conductivity meter. Heat is applied to the sample and then thermal equilibrium is sought. The heating and equilibration curve is reduced to derive the thermal conductivity value. Raw data are stored if a user wishes to do off-line or postexpedition reduction.</p>
IODP Expedition 368X Rig instrumentation
<p>Operational rig information data were measured using a variety of sensors and compiled using the RigWatch software package. Approximately 50 channels of drilling/coring data are captured in real time during the expedition. Data are presented as ASCII files extracted from the proprietary RigWatch data files and are presented by expedition. RigWatch data in time or depth domain can be imported into graphics and analysis programs to be merged and correlated with core physical properties data to enhance assessment of poor core recovery intervals.</p>
IODP Expedition 368X XRF Summary
<p>Elemental peak intensities in section halves were measured by an Avaatech X-ray fluorescence (XRF) Core Scanner postexpedition. Each measurement position may be measured at multiple XRF conditions in order to excite and measure specific ranges of elements (e.g., 10 kV and no filter for light elements). Peak intensity changes (concentrations not provided) are then used to help recognize and define major chemostratigraphic units without the need for destructive sampling. Data are presented in comma-delimited (CSV) files by section and by energy/instrumental conditions.</p>
IODP Expedition 368X Bulk and grain density (MAD)
<p>Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.</p>
IODP Expedition 368X X-ray diffraction (XRD)
<p>X-ray diffraction (XRD) is used to identify minerals and their proportions in sediment or hard rock sample powders on a Bruker AXS D4 Endeavor X-ray diffractometer. Results are returned as diffractograms in a viewable format (either PDF or PNG).</p>
IODP Expedition 368X P-wave velocity caliper (section/discrete)
<p>P-wave velocity data were measured on undisturbed section halves (JRSO-defined x-axis) and/or discrete cube and cylinder samples (x, y, or z-axis) using pairs of piezoelectric transducers mounted on a caliper system. Report includes P-wave velocity in x, y, and/or z-direction, caliper separation, traveltime between transucers, and first arrival picks.</p>
IODP Expedition 368X SRA (Source Rock Analysis)
<p>SRA provides safety monitoring and yields information about thermal maturation and source of hydrocarbons, as well as petroleum potential, in the sediment or rocks at a drilled site. Samples are heated in a pyrolysis oven in an inert atmosphere to quantitatively and selectively determine free hydrocarbons contained in the sample and the hydrogen- and oxygen-containing compounds that are volatilized during the cracking of unextractable organic matter in the sample (kerogen).</p>
IODP Expedition 368X Hand held XRF
<p>Elemental concentrations in section halves, unpowdered discrete samples (e.g., a thin section billet), or powdered discrete samples were measured by a handheld (portable) X-ray fluorescence spectrometer (pXRF). Data are presented by element, and it should be noted that for section-half or unpowdered discrete samples, the concentrations are not calibrated and should be used appropriately (even though they are reported in units).</p>
IODP Expedition 368X Hole summary
<p>Report lists hole data: location, water depth, drilling, coring system, and core recovery.</p>
IODP Expedition 368X Hole drilling summary
<p>Report includes detailed drilling data: BHA length, bit parameters, and primary depth measurements.</p>
IODP Expedition 368X Core composite images
<p>A digital composite image (PNG) is made for each core comprising core sections scanned using a line-scan camera. The composite layout is equivalent to traditional core table photos. Top left is top of core; color and meter rule references are included.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.