Find research datasets worth reusing

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

2-D Coanda Airfoil with Tangential Wall Jet. This web page provides data from experiments that may be useful for the validation of turbulence models. This resource is expected to grow gradually over time. All data herein arepublicly available.

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

POLARIS Model Data

POLARIS_Model_Data is the model data collected during the Photochemistry of Ozone Loss in the Arctic Region in Summer (POLARIS) campaign. Data collection for this product is complete.The POLARIS mission was a joint effort of NASA and NOAA that occurred in 1997 and was designed to expand on the photochemical and transport processes that cause the summer polar decreases in the stratospheric ozone. The POLARIS campaign had the overarching goal of better understanding the change of stratospheric ozone levels from very high concentrations in the spring to very low concentrations in the autumn. The NASA ER-2 high-altitude aircraft was the primary platform deployed along with balloons, satellites, and ground-sites. The POLARIS campaign was based in Fairbanks, Alaska with some flights being conducted from California and Hawaii. Flights were conducted between the summer solstice and fall equinox at mid- to high latitudes. The data collected included meteorological variables; long-lived tracers in reference to summertime transport questions; select species with reactive nitrogen (NOy), halogen (Cly), and hydrogen (HOx) reservoirs; and aerosols. More specifically, the ER-2 utilized various techniques/instruments including Laser Absorption, Gas Chromatography, Non-dispersive IR, UV Photometry, Catalysis, and IR Absorption. These techniques/instruments were used to collect data including N2O, CH4, CH3CCl3, CO2, O3, H2O, and NOy. Ground stations were responsible for collecting SO2 and O3, while balloons recorded pressure, temperature, wind speed, and wind directions. Satellites partnered with these platforms collected meteorological data and Lidar imagery. The observations were used to constrain stratospheric computer models to evaluate ozone changes due to chemistry and transport.

INTEX-B Model data

INTEX-NA is a two phase experiment that aims to understand the transport and transformation of gases and aerosols on transcontinental/intercontinental scales and assess their impact on air quality and climate. The primary constituents of interest are ozone and precursors, aerosols and precursors, and the long-lived greenhouse gases. The first phase (INTEX-A) was completed in the summer of 2004 and the second phase (INTEX-B) is to be performed in the spring of 2006. This document is intended to provide an update on the goals of INTEX-B and define its implementation strategy. The scientific goals envisioned here are based on the joint implementation of INTEX-B, MIRAGE-Mex and DLR/IMPACT studies and their coordination with satellite observations. In collaboration with these partners, the main goals of INTEX-B are to:- Quantify the transpacific transport and evolution of Asian pollution to North America and assess its implications for regional air quality and climate; - Quantify the outflow and evolution of gases and aerosols from the Mexico City Megaplex; - Investigate the transport of Asian and North America pollution to the eastern Atlantic and assess its implications for European air quality; - Validate and refine satellite observations of tropospheric composition; - Map emissions of trace gases and aerosols and relate atmospheric composition to sources and sinks.The INTEX-B field study is to be performed during an approximate 8-week period from March 1 to April 30, 2006.

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

ACCLIP WB-57 Aircraft Model Data

ACCLIP_Model_WB57_Data contains modeled meteorological, chemical, and aerosol data along the flight tracks of the WB-57 aircraft during the Asian Summer Monsoon Chemical & Climate Impact Project (ACCLIP). Data collection for this product is complete.ACCLIP is an international, multi-organizational suborbital campaign that aims to study aerosols and chemical transport that is associated with the Asian Summer Monsoon (ASM) in the Western Pacific region from 15 July 2022 to 31 August 2022. The ASM is the largest meteorological pattern in the Northern Hemisphere (NH) during the summer and is associated with persistent convection and large anticyclonic flow patterns in the upper troposphere and lower stratosphere (UTLS). This leads to significant enhancements in the UTLS of trace species that originate from pollution or biomass burning. Convection connected to the ASM occurs over South, Southeast, and East Asia, a region with complex and rapidly changing emissions due to its high population density and economic growth. Pollution that reaches the UTLS from this region can have significant effects on the climate and chemistry of the atmosphere, making it important to have an accurate representation and understanding of ASM transport, chemical, and microphysical processes for chemistry-climate models to characterize these interactions and for predicting future impacts on climate.The ACCLIP campaign is conducted by the National Aeronautics and Space Administration (NASA) and the National Center for Atmospheric Research (NCAR) with the primary goal of investigating the impacts of Asian gas and aerosol emissions on global chemistry and climate. The NASA WB-57 and NCAR G-V aircraft are outfitted with state-of-the-art sensors to accomplish this. ACCLIP seeks to address four scientific objectives related to its main goal. The first is to investigate the transport pathways of ASM uplifted air from inside of the anticyclone to the global UTLS. Another objective is to sample the chemical content of air processed in the ASM in order to quantify the role of the ASM in transporting chemically active species and short-lived climate forcing agents to the UTLS to determine their impact on stratospheric ozone chemistry and global climate. Third, information is obtained on aerosol size, mass, and chemical composition that is necessary for determining the radiative effects of the ASM to constrain models of aerosol formation and for contrasting the organic-rich ASM UTLS aerosol population with that of the background aerosols. Last, ACCLIP seeks to measure the water vapor distribution associated with the monsoon dynamical structure to evaluate transport across the tropopause and determine the role of the ASM in water vapor transport in the stratosphere.

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

STRAT Model Data

STRAT_Model_Data is the model data collected during the Stratospheric Tracers of Atmospheric Transport (STRAT) campaign. Data collection for this product is complete.The STRAT campaign was a field campaign conducted by NASA from May 1995 to February 1996. The primary goal of STRAT was to collect measurements of the change of long-lived tracers and functions of altitude, latitude, and season. These measurements were taken to aid with determining rates for global-scale transport and future distributions of high-speed civil transport (HSCT) exhaust that was emitted into the lower atmosphere. STRAT had four main objectives: defining the rate of transport of trace gases from the stratosphere and troposphere (i.e., HSCT exhaust emissions), improving the understanding of dynamical coupling rates for transport of trace gases between tropical regions and higher latitudes and lower altitudes (between tropical regions, higher latitudes, and lower altitudes are where most ozone resides), improving understanding of chemistry in the upper troposphere and lower stratosphere, and finally, providing data sets for testing two-dimensional and three-dimensional models used in assessments of impacts from stratospheric aviation. To accomplish these objectives, the STRAT Science Team conducted various surface-based remote sensing and in-situ measurements. NASA flew the ER-2 aircraft along with balloons such as ozonesondes and radiosondes just below the tropopause in the Northern Hemisphere to collect data. Along with the ER-2 and balloons, NASA also utilized satellite imagery, theoretical models, and ground sites. The ER-2 collected data on HOx, NOy, CO2, ozone, water vapor, and temperature. The ER-2 also collected in-situ stratospheric measurements of N2O, CH4, CO, HCL, and NO using the Aircraft Laser Infrared Absorption Spectrometer (ALIAS). Ozonesondes and radiosondes were also deployed to collect data on CO2, NO/NOy, air temperature, pressure, and 3D wind. These balloons also took in-situ measurements of N2O, CFC-11, CH4, CO, HCL, and NO2 using the ALIAS. Ground stations were responsible for taking measurements of O3, ozone mixing ratio, pressure, and temperature. Satellites took infrared images of the atmosphere with the goal of aiding in completing STRAT objectives. Pressure and temperature models were created to help plan the mission.

INTEX-A Model data

Intercontinental Chemical Transport Experiment - North America Phase A (INTEX-A) is an integrated atmospheric field experiment performed over North America. The study seeks to understand the transport and transformation of gases and aerosols on transcontinental/intercontinental scales and their impact on air quality and climate. A particular focus in this study is to quantify and characterize the inflow and outflow of pollution over North America. The main constituents of interest are ozone and precursors, aerosols and precursors, and the long-lived greenhouse gases. INTEX-NA is part of a larger international ITCT (Intercontinental Transport and Chemical Transformation) initiative. INTEX-NA goals are greatly facilitated and enhanced by a number of concurrent and coordinated national and international field campaigns and satellite observations. Synthesis of the ensemble of observation from surface, airborne, and space platforms, with the help of a hierarchy of models is an important goal of INTEX-NA.

restrictednotspecifiedJun 2025View details →

Satellite Laser Ranging (SLR) Data Handling File for the International Laser Ranging Service (ILRS) extension of the International Terrestrial Reference Frame 2020 (ITRF2020) TRF Model with additional SLR sites

Corrections to SLR tracking data collected from various tables on CDDIS, resolutions from the ILRS/ASC (AWG) meetings, the T2L2 @ Jason-2 project (July 2008 to December 2017), the final results of the ILRS Station Systematic Error Monitoring--SSEM project, amended with results from its 2023 extension as an ongoing project, SSEM-X.

TRACE-P Model Data

TRACE-P_Model_Data is the model data collected during the Transport and Chemical Evolution over the Pacific (TRACE-P) suborbital campaign. Data collection for this product is complete.The NASA TRACE-P mission was a part of NASA’s Global Tropospheric Experiment (GTE) – an assemblage of missions conducted from 1983-2001 with various research goals and objectives. TRACE-P was a multi-organizational campaign with NASA, the National Center for Atmospheric Research (NCAR), and several US universities. TRACE-P deployed its payloads in the Pacific between the months of March and April 2001 with the goal of studying the air chemistry emerging from Asia to the western Pacific. Along with this, TRACE-P had the objective studying the chemical evolution of the air as it moved away from Asia.  In order to accomplish its goals, the NASA DC-8 aircraft and NASA P-3B aircraft were deployed, each equipped with various instrumentation. TRACE-P also relied on ground sites, and satellites to collect data. The DC-8 aircraft was equipped with 19 instruments in total while the P-3B boasted 21 total instruments. Some instruments on the DC-8 include the Nephelometer, the GCMS, the Nitric Oxide Chemiluminescence, the Differential Absorption Lidar (DIAL), and the Dual Channel Collectors and Fluorometers, HPLC. The Nephelometer was utilized to gather data on various wavelengths including aerosol scattering (450, 550, 700nm), aerosol absorption (565nm), equivalent BC mass, and air density ratio. The GCMS was responsible for capturing a multitude of compounds in the atmosphere, some of which include CH4, CH3CHO, CH3Br, CH3Cl, CHBr3, and C2H6O. DIAL was used for a variety of measurements, some of which include aerosol wavelength dependence (1064/587nm), IR aerosol scattering ratio (1064nm), tropopause heights and ozone columns, visible aerosol scattering ratio, composite tropospheric ozone cross-sections, and visible aerosol depolarization. Finally, the Dual Channel Collectors and Fluorometers, HPLC collected data on H2O2, CH3OOH, and CH2O in the atmosphere. The P-3B aircraft was equipped with various instruments for TRACE-P, some of which include the MSA/CIMS, the Non-dispersive IR Spectrometer, the PILS-Ion Chromatograph, and the Condensation particle counter and Pulse Height Analysis (PHA). The MSA/CIMS measured OH, H2SO4, MSA, and HNO3. The Non-dispersive IR Spectrometer took measurements on CO2 in the atmosphere. The PILS-Ion Chromatograph recorded measurements of compounds and elements in the atmosphere, including sodium, calcium, potassium, magnesium, chloride, NH4, NO3, and SO4. Finally, the Condensation particle counter and PHA was used to gather data on total UCN, UCN 3-8nm, and UCN 3-4nm. Along with the aircrafts, ground stations measured air quality from China along with C2H2, C2H6, CO, and HCN. Finally, satellites imagery was used to collect a multitude of data, some of the uses were to observe the history of lightning flashes, SeaWiFS cloud imagery, 8-day exposure to TOMS aerosols, and SeaWiFS aerosol optical thickness. The imagery was used to best aid in planning for the aircraft deployment.  

SOLVE I ER-2 Analysis Model Data

SOLVE1_Analysis_ER2_Data contains modeled trajectories and meteorological data along the flight path for the ER-2 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

OWLETS-1 Analysis Model Data

OWLETS1_Model_Data_1 is the Ozone Water-Land Environmental Transition Study (OWLETS-1) analysis model data utilized during the OWLETS field campaign. OWLETS was supported by the NASA Science Innovation Fund (SIF). Data collection is complete.Coastal regions have typically posed a challenge for air quality researchers due to a lack of measurements available over water and water-land boundary transitions. Supported by NASA’s Science Innovation Fund (SIF), the Ozone Water-Land Environmental Transition Study (OWLETS) field campaign examined ozone concentrations and gradients over the Chesapeake Bay from July 5, 2017 – August 3, 2017, with twelve intensive measurement days occurring during this time period. OWLETS utilized a unique combination of instrumentation, including aircraft, TOLNet ozone lidars (NASA Goddard Space Flight Center Tropospheric Ozone Differential Absorption Lidar and NASA Langley Research Center Mobile Ozone Lidar), UAV/drones, ozonesondes, AERONET sun photometers, and mobile and ship-based measurements, to characterize the land-water differences in ozone and other pollutants. Two main research sites were established as part of the campaign: an over-land site at NASA LaRC, and an over-water site at the Chesapeake Bay Bridge Tunnel. These two research sites were established to provide synchronous vertical measurements of meteorology and pollutants over water and over land. In combination with mobile observations between the two sites, pollutant gradients were able to be observed and used to better understand the fundamental processes occurring at the land-water interface. OWLETS-2 was completed from June 6, 2018 – July 6, 2018 in the upper Chesapeake Bay region. Research sites were established at the University of Maryland, Baltimore County (UMBC), Hart Miller Island (HMI), and Howard University Beltsville (HUBV), with HMI representing the over-water location and UMBC and HUBV representing the over-land sites. Similar measurements were carried out to further characterize water-land gradients in the upper Chesapeake Bay. The measurements completed during OWLETS are of importance in enhancing air quality models, and improving future satellite retrievals, particularly, NASA’s Tropospheric Emissions: Monitoring of Pollution, which is scheduled to launch in 2022.

Water Security Indicator Model - Global Land Data Assimilation System (WSIM-GLDAS) Monthly Grids, Version 1

The Water Security Indicator Model - Global Land Data Assimilation System (WSIM-GLDAS) Monthly Grids, Version 1 data set identifies and characterizes surpluses and deficits of freshwater, and the parameters determining these anomalies, at monthly intervals over the period January 1948 to December 2014. The data set uses the land surface model outputs from NASA's Global Land Data Assimilation System, covering the global extent, to generate anomaly values for the following parameters at a gridded resolution of 0.25 degrees: temperature, precipitation, soil moisture, potential minus actual evapotranspiration, runoff, total blue water (flow-accumulated runoff), composite index of water surplus, and composite index of water deficits. These data are provided in terms of return periods, scientific Units, and standardized (normalized) anomalies, and are computed over 1-month, 3-month, 6-month, and 12-month temporal periods of accumulation, referred to as integration periods. Anomaly values are present in terms of return periods with respect to a fitted Generalized Extreme Value (GEV) probability distribution function over a historical baseline period of January 1950 to December 2009, at a global spatial resolution of 0.25 degrees over the monthly, 3-month, 6-month, and 12-month periods of integration. Parameter values (location, scale, shape) of the fitted GEV probability distribution, which are fit separately for each calendar month, are distributed per parameter for each integration period.

CLPX NCAR Data Analysis and Numerical Modeling, Version 1

This data set consists of three-dimensional meteorological analyses for the entire cold season 2002-2003 for the three CLPX Meteorological Study Areas (MSAs) in northern Colorado (North Park, Fraser and Rabbit Ears) using high-resolution (500 m horizontal grid spacing).

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet

restrictednotspecifiedMay 2025View details →

PEM Tropics B Model Data

PEM-Tropics-B_Model_Data is the model data collected during the Pacific Exploratory Mission (PEM) Tropics B suborbital campaign. Data collection for this product is complete.From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns were focused on the tropical Pacific region (PEM-Tropics) which was recognized as a “very large chemical vessel.” The overarching science objective was to assess the anthropogenic impact on tropospheric oxidizing power. A secondary objective was to investigate the impact of atmospheric sulfur chemistry, including oxidation of marine biogenic emission of dimethyl sulfide (DMS) on aerosol loading and radiative effect, which is of critical importance in the assessment of global climate change. The PEM-Tropics mission was conducted in two phases to contrast the influence of biomass burning in the dry season and the “relatively clean” wet season. The first, PEM-Tropics A, was carried out during the end of the dry season (August-September 1996), and the second, PEM-Topics B, was conducted during the wet season (March-April 1999). To accomplish its objectives, PEM-Tropics enlisted the NASA DC-8 and P-3B aircrafts to carry out longitudinal and latitudinal surveys at various altitudes as well as vertical profile sampling across the Pacific basin. Both aircrafts were equipped with in-situ instruments measuring hydroperoxyl radicals (HOx), ozone (O3), photochemical precursors (including, reactive nitrogen species and non-methane hydrocarbon species), and intermediate products (e.g., hydrogen peroxide (H2O2), formaldehyde (CH2O), and acetic acid (CH3OOH). The P3-B in-situ instrument payload also included a direct measurement of hydroxyl (OH) for both missions, while the OH and hydroperoxyl radical (HO2) measurements were added to DC-8 aircraft for PEM-Tropics B. Taking advantage of its excellent low altitude capability, the P-3B was instrumented with a comprehensive sulfur measurement package and conducted pseudo-Lagragian sampling for evaluating DMS oxidation chemistry, including measurements of DMS, sulfur dioxide (SO2), sulfuric acid (H2SO4), and methylsulfonic acid (MSA) as well as the first airborne measurement of dimethyl sulfoxide (DMSO) during PEM-Tropics B. More importantly, it was the first time that DMS (the source), OH and O3 (primary oxidants), and products (DMSO, MSA, H2SO4, SO2) were measured simultaneously aboard an aircraft in the tropical pacific. These observations, specifically DMSO, presented a substantial challenge to the DMS oxidation kinetics to this day. The DC-8 aircraft was equipped with the Differential Absoprtion Lidar (DIAL) during PEM-Tropics A, and the differential absorption lidars DIAL and LASE during PEM-Tropics B. These lidars provided real-time information for fine tuning the flight tracks to capture sampling opportunities. The lidar data products themselves provide valuable information of vertical profiles of ozone as well as aerosol and water vapor in tropical Pacific Furthermore, both aircrafts were fitted with instruments for aerosol composition and microphysical property measurements. Detailed description related to the motivation, implementation, and instrument payloads are available in the PEM-Tropics A overview paper and the PEM-Tropics B overview paper. Most of the publications based on PEM-Tropics A and B observations are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-Tropics A and NASA Global Tropospheric Experiment Pacific Exploratory Mission in the Tropics Phase B: Measurement and Analyses (PEM-Tropics B), while other publications such as Nowak et al. (2001) were published prior to the special issues.

Turbulence Models: Data from Other Experiments: 2-D Coanda Airfoil with Tangential Wall Jet