Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
958
datasets available to search
ShareScore release 0.9.0
Dataset results
958 results for “Data Quality”
Voltage and current data for IEC 62600-30 power quality monitoring from the Mutriku Wave Power Plant and Lir National Ocean Test Facility electrical laboratory
<p>This Technical Note describes the electrical data collected from the Mutriku Wave Power Plant (MWPP) and the Lir National Ocean Test Facility (NOTF) electrical laboratory at the MaREI Centre in the Environmental Research Institute, at University College Cork.</p> <p>In summary, the electrical data collect is for the purpose of analysing the power quality output of a Wave Energy Converter (WEC). The data includes voltage and current signals from the output of a WEC sampled at 15 kHz from the MWPP and a WEC emulator sampled at 20 kHz from the Lir NOTF electrical laboratory. There are 24 datasets from the MWPP taken at various sea state conditions, and there are 56 datasets from the Lir NOTF which are taken with at various sea state conditions, with different control laws, and grid connections.</p> <p>This data is published for purpose of power quality analysis and comparison for future tests. For OPERA, power quality analysis was performed as part of WP5 T5.2 and T5.5, and presented in depth in Deliverables D5.2 and D5.4.</p> <p>See accompanying technical note for more Information.</p>
Quality-checked meteorological data from the Southern Ocean collected during the Antarctic Circumnavigation Expedition from December 2016 to April 2017.
<p><strong>Dataset abstract</strong></p> <p>This dataset contains quality-checked meteorological observations of air temperature, relative humidity, dew point, barometric pressure and observations of downwelling solar radiation and ultraviolet radiation. Further it contains the wind speed and direction relative to the ship but not corrected for air-flow distortion, and translated into the earth reference frame. For each of these variables observations are available from a portside and starboard side sensor. The dataset also contains, cloud base height and sky cover at three levels measured with a Ceilometer.</p> <p>As additional information the solar azimuth and altitude angle have been calculated for the ship’s position every five minutes and have been added as a one-minute time series using the nearest value. The ship’s position, heading, course and speed over ground are also provided.</p> <p>The wind speed measurements were made at a height of approximately 30.5 meters above sea level. The measurement height of the temperature and humidity probes is 23.7 meters above sea level. The barometric pressure was measured at 20 meters above sea level.</p> <p>The observations have been screened for implausible values and on some occasions despiking based on visual inspection and a rolling interquartile range filter have been applied. Solar radiation measurements are affected by shadowing of the ship, and the air temperature and humidity by the heating of air that passes over the ship. Masks are provided to flag affected observations. The wind speed readings are affected by airflow distortion and should be used with consideration until a dataset of corrected wind speeds is published. More details on airflow distortion can be requested from the contact person.</p> <p><strong>Dataset contents</strong></p> <ul> <li>ACE_filtered_meteorological_data_1min.csv, data file, comma-separated values</li> <li>diff_TA1_TA3_WDR2_5min_1.png, metadata, portable network graphics</li> <li>ratio_SR1_SR3_solangle_5min_1.png, metadata, portable network graphics</li> <li>data_file_header.txt, metadata, text</li> <li>README.txt, metadata, text</li> <li>ace_filtered_meteorological_data_change_log.txt, metadata, text</li> </ul> <p><strong>Change log</strong></p> <p><strong>v1.1</strong> - The range check for skycover (SC) and cloudlevel (CL) was added to the quality-checking routines. 53 data points violated the range check for these variables: these have now been marked as NaN.</p> <p><strong>v1.0</strong> - Initial release of verified meteorological data.</p> <p><strong>Dataset license</strong></p> <p>This meteorological dataset is made available under the Creative Commons Attribution 4.0 International License (CC BY 4.0) whose full description can be found at https://creativecommons.org/licenses/by/4.0/</p>
Intermediate processing steps of quality-checking of Antarctic Circumnavigation Expedition (ACE) cruise track data.
<p><strong>Dataset abstract</strong></p> <p>The Antarctic Circumnavigation Expedition (ACE), undertaken in the austral summer of 2016/2017 recorded the cruise track using two independent geo-location instruments: one using GLobal NAvigation Satellite Systems (GLONASS; hereafter referred to as GLONASS) and another primarily using the Global Positioning System (GPS; hereafter referred to as the Trimble GPS). Daily log files were recorded in real-time from both instruments during the expedition and added to MySQL database tables. Following the expedition, quality-checking work has been undertaken to provide a one-second resolution set of positions for the cruise track. This dataset presents the intermediate files that were produced during the quality-checking, therefore it could be used to check the processing steps that have been undertaken, but should not be used as a final source of the cruise track data. Both the original raw data files and final quality-checked cruise track can be found in related datasets.</p> <p><strong>Dataset contents</strong></p> <ul> <li>ace_INSTRUMENT_YYYY-MM-DD.csv – daily files for each instrument that were output from the database, data file, comma-separated values</li> <li>ace_INSTRUMENT_concatenated_YYYY-MM.csv – input files concatenated by month and instrument, data file, comma-separated values</li> <li>flagging_data_ace_INSTRUMENT_YYYY-MM-DD.csv – daily output files for each instrument with flagged data points, data file, comma-separated values</li> <li>track_data_combined_overall_flags_YYYY-MM.csv – instrument data combined with overall data flag for each month, data file, comma-separated values</li> <li>track_data_prioritised_YYYY-MM.csv – prioritised data files with overall data flag for each month, data file, comma-separated values</li> <li>ace_INSTRUMENT_manual_position_errors.csv – files containing the manually-observed errors, metadata, comma-separated values</li> <li>in_port.csv - dates on when the ship was stationary in port, metadata, comma-separated values</li> <li>README.txt – metadata, text file</li> <li>data_file_header.txt – metadata, text file</li> </ul> <p><strong>Dataset license</strong></p> <p>This dataset containing intermediate processing files of the ACE cruise track is made available under the Creative Commons Attribution 4.0 International License (CC BY 4.0) whose full text can be found at https://creativecommons.org/licenses/by/4.0/</p>
Water quality data (River sediment, Nitrogen and Phosphorus loads) for Africa
<p>Output data on African water quality and scripts for preprint - "One third of African rivers fail to meet the 'good ambient water quality' nutrient targets" at <a href="https://dx.doi.org/10.2139/ssrn.4829742">https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4829742</a> . Please check the readme file for data description. The data includes river flow, sediment load, nitrogen and Phosphorus loads for Africa at daily and yearly time scale. This work is currently under review in Ecological Indicators journal. </p>
COMPAIR traffic and air quality sensor data
<p>Sensor data regarding traffic and air quality was gathered as part of the <a href="https://cordis.europa.eu/project/id/101036563">EU Horizon2020 COMPAIR project</a> in Europe. The pilot cities/regions are Berlin, Athens, Sofia, Plovdiv, and Flanders.<br><br>During the project, the data was published through an <a href="https://sensorthings.wecompair.eu/FROST-Server/v1.1/Things">OGC SensorThings API</a>. To persist after the project, the air quality related are available as CSV exports, with the retention of the API's structure (Location, Thing, Datastream, Sensor, ObservedProperty, and Observation). Observations about air quality contain sensor readings regarding nitrodioxide (NO2), black carbon (BC), particulate matter (PM1.0, PM2.5 and PM10), humidity and temperature. The NO2 observations are calibrated data streams.<br><br>The traffic observations remain available through the <a href="https://app.swaggerhub.com/apis-docs/telraam/Telraam-API/1.2.0">API of the Telraam platform</a>.<br><br><br></p>
Data for manuscript titled 'Impact of urbanization and drought on river water quality, case study of nutrient levels in Cuenca and Giron (Azuay, Ecuador)'
<p>The uploaded zip-file entails the data obtained through four field campaigns performed in the province of Azuay (Ecuador) in the period July 2023 - May 2024, which is used as a basis for the manuscript titled 'Impact of urbanization and drought on river water quality, case study of nutrient levels in Cuenca and Giron (Azuay, Ecuador)' that was submitted to a Special Issue in the journal Water in 2024. The study aimed at illustrating the impact of urbanisation and drought on the abiotic water conditions of the rivers passing through the studied urban areas.</p> <p>The data includes a subfolder with data obtained from an external website (https://generacioncsr.celec.gob.ec/graficasproduccion/) and aligns with the folder structure of the GitHub-repository that contains the analysis scripts (to be added when the manuscript is accepted). The data file only contains the baseline data, while results can be obtained through running the R-scripts in the GitHub-repository. Additional comments on the analyses are also provided in the analysis scripts.</p> <p><strong>DATA COLLECTION</strong></p> <p>Information on the locations was collected prior to the first field campaign (July 2023) and confirmed in the field (and corrected when necessary). The following variables were registered: Date & Time, Coordinates (latitude and longitude, in WGS84 format), Altitude (in meters above mean sea level), Distance (to a fixed location downstream; being the province border), and Category (River or Stream).</p> <p>Information on the physicochemical conditions was collected directly in the field with a <strong>Horiba U-52</strong> multiprobe. The following variables were registered: Temperature, pH, Electrical conductivity (reference at 25 °C), Oxygen level (as concentration), and Turbidity (in NTU).</p> <p>At each site, a bucket was rinsed thrice with prevailing surface water and subsequently filled with a water sample of the top of the water column. The multiprobe was rinsed with this sample water and then submerged in the bucket, followed by continuous stirring (to avoid a decrease of the oxygen levels) until the readings stabilised. After stabilisation, readings were recorded on a separate data sheet prior to being digitalised.</p> <p>Information on the nutrient levels was obtained through the collection of water samples in the field and the subsequent analysis in the laboratory. The following nutrients were selected: ammonium, nitrate, nitrite, and orthophosphate. For the analyses, <strong>Merck test kits</strong> (equivalent to USEPA analyses) were used in combination with a Genesys UV-VIS spectrophotometer (Thermofisher).</p> <p><strong>In the field</strong>, a bucket was rinsed thrice with prevailing surface water and subsequently filled with a water sample of the top of the water column. A polyethylene syringe was rinsed thrice with sample water and subsequently filled prior to being fitted with a 0.45 µm PES filter. About 100 mL of sampled water was filtered and collected in a 250 mL polyethylene bottle that was rinsed with the first 5 mL of filtered water. The bottle was stored in a cooling box and transported to the laboratory.</p> <p><strong>In the laboratory</strong>, the 250 mL bottle was stored at 4 °C until analysis. Within 36 hours, concentrations of ammonium, nitrate, nitrite, and orthophosphate were determined <strong>in triplicate</strong>. More specifically, the following test kits were used to determine said nitrogen and phosphorus concentrations (with quantification range between brackets):</p> <ul> <li>Ammonium: 1.14752.0001 (0.05-3.00 mgN/L)</li> <li>Nitrate: 1.14773.0001 (2-20 mgN/L)</li> <li>Nitrite: 1.14776.0001 (0.02-1.00 mgN/L)</li> <li>Orthophosphate: 1.14848.0001 (0.05-5.00 mgP/L)</li> </ul> <p>Regarding the <strong>spectrophotometric determination</strong>, all analyses were complemented with a blank and a standard with a known concentration of each individual nutrient component. For each nutrient, a specific wavelength was used and the resulting absorbance was converted to the associated nutrient concentration through known factors (similar to the use of calibration curves), after setting the absorbance of the blank as reference absorbance (i.e. a concentration of 0 mg/L). All of the analyses were performed with plastic 1-cm cuvettes during the first campaign, while 5-cm cuvettes were used in the remaining three campaigns due to low nutrient levels (except for nitrate, for which an analysis through 5-cm cuvettes is not supported by the used test kits).</p>
Water quality data from Turbinator
<p>Sensors to monitor water quality are operating in harsh environments since they are in frequent contact with water. The Turbinator turbidity and water level sensor developed by IVL works around this issue by using a laser beam and a camera to measure turbidity and water level without being in contact with water. It can be used for early warning of pollutants or for predictive maintenance of a city's pipeline network for waste- and stormwater. The Turbinator is easy to install or de-install for example when the battery needs to be changed or the sensor is moved to a new location. No drilling is required. The installation and un-installation can be done without entering the drain, thus avoiding otherwise necessary safety measures. The sensors measure distance from the sensor to the water and turbidity. The dataset contains the following columns:</p> <ul> <li>id: identifier of the Turbinator;</li> <li>dateobserved: timestamp of the measurement in UTC;</li> <li>location: Well Known Text representation of the GPS location of the Turbinator;</li> <li>turbidity: turbidity in NTU</li> <li>distance: distance between the sensor (top of the well) and the water in meters.</li> </ul>
Water quality data from Talkpool sensor
<p>Talkpool installed water quality sensors measuring temperature, conductivity, pH and turbidity in recipients receiving wast water from construction sites to be able to monitor the influence of waste water from construction sites on water quality in those recipients. Sensors are installed both upstream and downstream from the discharge point to be able to measure the effect of the waste water.</p>
Air quality, soil moisture, green roof moisture and weather data from Meetjestad
<p>Soil moisture sensors were developed by citizen science collective Meet je Stad (Measure your City). Measure your City was started in 2015 by inhabitants of the City of Amersfoort, with the goal of measuring climate related indicators. To be able to do so, collaboration was sought with the City of Amersfoort (COA), the local Water Authority and the University of Applied Sciences of Amsterdam. For the first three years the initiative focused on measuring temperature and humidity. Importantly, citizens develop their own research questions, analyze the data together with professionals and discuss potential implications. By doing so, the collective uses citizen science to spread knowledge on both technology and climate change in the most grass-roots manner possible. Within the SCOREwater project, Measure your City was asked to expand measurements with soil moisture measurements and additional temperature and humidity sensors.</p> <p>An important note here is that Measure your City develops their own sensors, has developed their own data platform and uses its own gateways purchased from the Things Network. As a result, much effort is put into constructing sensors that are reliable, low-maintenance and accurate. The latter is important for the City of Amersfoort as well, which intends to not only work on shared knowledge and understanding, but also use the data for policy making. To do so the data has to be reliable. By deploying both these sensors and purchasing company-built sensors, we can compare the data to assess how reliable the Measure your City sensors are.</p> <p>The Measure your City can also be deployed on green roofs to measure soil moisture. Whereas the soil moisture sensor measures soil moisture on two depths (10 centimeter and 40 centimeter), the sensor on a roof only measures soil moisture on one depth. In addition to soil moisture, Measure your City also measures air temperature and relative humidity. Some sensors also measure air quality (particle matter).</p>
Water quality data from s::can sensors in the Barcelona sewer system
<p>Within the frame of the SCOREwater project, BCASA and s::can installed water quality sensors in the sewer system in three neighbourhoods with different socio-economic characteristics (Poblenou, Sant Gervasi and Carmel) in the City Of Barcelona. To prevent vandalism, the exact location of the sensors cannot be disclosed. The sensors are monitoring physico-chemical parameters in the sewer network. These data can be used for multiple purposes, both related to predictive maintenance of the sewer network and life style analysis of inhabitants of Barcelona:</p> <ul> <li>a better operation and maintenance of the sewer network</li> <li>minimizing odor episodes and corrosion from H2S</li> <li>try to prevent blocking from sediments</li> <li>detect spills into the sewer system from a construction site or illegal discharge</li> <li>learn population habits from analyzing the waste water from the three different neighborhoods</li> <li>to learn about how the inhabitants use pharmaceuticals or other compounds (perhaps abusing of it).</li> </ul>
Cyanobacteria abundance, cyanotoxin concentration, and water quality data for the upper San Francisco Estuary, California, USA: 2014-2019
The goal of these measurements was to quantify Microcystis abundance and microcystin concentration and associated water quality conditions during summer blooms in the upper San Francisco Estuary in California, USA. Blooms of harmful algae are a major ecological concern in the area because harmful algae produce toxins and other metabolites, which deteriorate water quality and negatively impact the aquatic ecosystem. Our research team collected biological, physical, and chemical data at 2-week to 4-week intervals during the summer and fall from 2014 through 2019. Data included surface measurements of Microcystis volume (area-based diameter) by microscopy (flowCAM digital imaging flow cytometry) and subsurface (1 m depth) measurements of Microcystis, Aphanizomenon and Dolichospermum cell abundance measured by quantitative PCR, cyanotoxin concentration (total microcystins, anatoxin a and saxitoxin) measured by protein phosphatase inhibition assay or enzyme linked immunosorbent assay, and a suite of water quality parameters (water temperature, dissolved oxygen, nutrient concentration, water transparency, specific conductance, turbidity, pH, and chlorophyll a concentration). Details for the field sampling and analytical methods are available in Lehman et al. (2017). We also performed shotgun metagenomic analyses to investigate biodiversity of cyanobacteria and other aquatic microorganisms and all the DNA sequencing data are publicity available (www.ncbi.nlm.nih. gov/; BioProject ID: PRJNA434758, Kurobe et al. 2018, Lehman et al. 2021). During the study, we experienced critically dry (2014 and 2015), below normal (2016 and 2018), and wet years (2017 and 2019), therefore data obtained in this study provided a unique opportunity to assess impacts of extreme conditions on the aquatic ecosystem (Kurobe et al. 2018, Lehman et al. 2020).
Interagency Ecological Program: Zooplankton and water quality data in the San Francisco Estuary collected by the Summer Townet and Fall Midwater Trawl monitoring programs.
The Interagency Ecological Program’s (IEP) Summer Townet Survey (STN) and Fall Midwater Trawl (FMWT) are two long-term monitoring projects conducted by the California Department of Fish and Wildlife (CDFW) to monitor fish abundance and distribution trends in the San Francisco Estuary (SFE) since 1959 and 1967, respectively. Starting in 2005, zooplankton monitoring was added and paired with fish tows to investigate food availability for young fishes. Food limitation has been a long-term issue and a focus of the Pelagic Organism Decline (POD) studies that began in 2005. By 2011, STN routinely conducted zooplankton monitoring at 40 stations, and FMWT at 32 stations in the upper SFE from Carquinez Strait to the Sacramento Deep Water Ship Channel and into the South Delta. STN samples every other week from June to August and FMWT samples once monthly from September to December. Both projects collect mesozooplankton samples using a modified Clarke-Bumpus (CB) net to target copepods and cladocerans, and FMWT also samples macrozooplankton (i.e. mysids and amphipods) using a mysid net. Flowmeters are used to measure the volume sampled to determine zooplankton catch per unit effort. Environmental variables such as water temperature, turbidity, secchi, and electrical conductivity are collected with each zooplankton sample. Concurrent fish and zooplankton tows conducted by STN and FMWT have allowed for comparisons of fish diet to the available zooplankton prey at the time of collection.
Sacramento-San Joaquin Bay-Delta Continuous (15 Minute) water quality monitoring data collected by the Continuous Environmental Monitoring Program, DWR, 2005- ongoing.
The Continuous Environmental Monitoring Program (CEMP) plays an instrumental role in overseeing real-time water quality in the Sacramento-San Joaquin Delta (the Delta) and Suisun Bay. The program harnesses wireless telemetry to transmit crucial data to the California Data Exchange Center (CDEC), making high-resolution environmental data pertaining to the Delta and Suisun Bay publicly accessible. The extensive dataset captures information at 15-minute intervals from 15 monitoring stations, utilizing YSI 6600 and YSI EXO sondes to obtain standalone water quality measurements. This extensive dataset informs the operations of the California State Water Project, ensuring it adheres to mandated water quality standards set by Water Right Decision 1641. This data compilation incorporates all information since the transition to YSI multiparameter sondes in 2005. It is important to note that the commencement dates and subsequent upgrades vary between stations, leading to slight discrepancies in the dataset's date ranges. Since its inception in the mid-1980s, CEMP has progressively expanded its monitoring capabilities, consistently augmenting the number of monitoring locations and the array of water quality parameters assessed. Its commitment to utilizing the most advanced water quality monitoring technology reaffirms its position as an environmental monitoring leader in the Delta and Suisun Bay. Today, the program oversees 15 water quality stations that reliably capture data every 15 minutes, each day of the year, transmitting this data in real-time. The core tenents of CEMP: • to obtain consistent and accurate data in real-time at established monitoring stations • to provide data necessary to achieve compliance with salinity, flow, and dissolved oxygen standards • to perform data analyses for further understanding of estuarine ecology • to report information to other government agencies, as well as the public, for the purpose of management and conservation of the upper San F
Interagency Ecological Program: Discrete water quality and phytoplankton data from the Sacramento River floodplain and Yolo Bypass tidal slough, collected by the Yolo Bypass Fish Monitoring Program, 1998 - 2022
The Yolo Bypass Fish Monitoring Program (YBFMP) operates a rotary screw trap and fyke trap and conducts biweekly beach seine and lower trophic surveys in addition to maintaining water quality instrumentation in the bypass. The YBFMP serves to fill information gaps regarding environmental conditions in the bypass that trigger migrations and enhanced survival and growth of native fishes, as well as provide data for IEP synthesis efforts. YBFMP staff also conduct analyses of YBFMP monitoring data to address pertinent management related questions as identified by IEP. The Yolo Bypass has been identified as a high restoration priority by the National Marine Fisheries Service and US Fish and Wildlife Service Biological Opinions for Delta Smelt, Winter and Spring-run Chinook salmon and by California EcoRestore. The YBFMP informs the restoration actions that are mandated or recommended in these plans and provides critical baseline data on the ecology of the bypass and how it interacts with the broader San Francisco Estuary. Program objectives include: Collecting baseline data on water quality, chlorophyll, lower trophic level biota, and fish in the Yolo Bypass to monitor spatial and temporal changes in trends and abundance; Analyzing and communicating Yolo Bypass data with stakeholders and the scientific and management communities to address pertinent management related questions; Providing technical expertise on Yolo Bypass aquatic ecology and monitoring and sampling methods. We collect discrete water quality data using a YSI ProDSS and sample phytoplankton, chlorophyll and nutrients as discrete water grabs taken biweekly (or weekly during Yolo Bypass inundation) along with lower trophic tows. Water is sampled at three sites along the Yolo Bypass and Sacramento River, then processed and analyzed by an internal DWR laboratory.
LAGOS-US LANDSAT: Data module of remotely-sensed water quality estimates for U.S. lakes over 4 ha from 1984 to 2020
This data package, LAGOS-US LANDSAT, is one of the extension data modules of the LAGOS-US platform that provides six water quality estimates (chlorophyll, Secchi depth, dissolved organic carbon, total suspended solids, turbidity, and true water color) from remote sensing for lakes ≥ 4 ha in the conterminous U.S. (48 states plus the District of Columbia) for the years 1984-2020. These estimates are generated through machine learning models on in-lake water quality matchups from LAGOS-US LIMNO with Landsat 5, 7, and 8 whole lake median reflectance values and pixel-wise band ratios that are subsequently used to make predictions across the U.S. The LANDSAT module contains remotely sensed reflectance values for 136,977 of the 137,465 lakes ≥ 4 ha from the LAGOS-US research platform. Within the module are a total of 45,867,023 sets of reflectance values, a matchup dataset with a window of up to 7 calendar days with in situ data, and associated water quality parameter predictions for each reflectance set. Additional quality control flags are provided for predictions indicating whether reflectance extractions included negative values, the percent of the maximum pixels ever retrieved for that lake that the predictions are based on, and whether there are shared calendar day predictions due to scene overlap.
The Jefferson Project 2021 water quality data from three vertical profiler stations in Lake George, NY, USA.
The Jefferson Project at Lake George -- a partnership between Rensselaer Polytechnic Institute, IBM Research, and Lake George Association -- combines Internet of Things technology and powerful analytics with science to create a new model for environmental monitoring and prediction. The project is building a computing platform that captures and analyzes data from a network of sensors tracking water quality and movement. These sensor data are combined with other monitoring and experimental data to create a thorough understanding of the factors that drive the lake's food web, hydrology, and water quality. More information about The Jefferson Project is available at https://jeffersonproject.rpi.edu/ In 2021, The Jefferson Project deployed three vertical profiler stations on the lake, collecting data on water quality and weather. Meteorological data have been included with the Jefferson Project Weather Station dataset for 2021. These vertical profiler stations are named VP_AnthonysNose, VP_HarrisBay, and VP_TeaIsland. The water quality data are collected by a YSI EXO2 Multi-parameter sonde sensors. The sensors collect data at 1 meter or less depth increments, starting at 1 meter and proceeding to 2 meters off bottom. The data are transferred in near real-time to an off-site database for monitoring and review. The data provided here have undergone data correction by Jefferson Project researchers.
The Jefferson Project 2021 hydrologic, water quality, and soil quality data from 12 Tributary Stations within the Lake George basin, NY, USA.
The Jefferson Project at Lake George -- a partnership between Rensselaer Polytechnic Institute, IBM Research, and Lake George Association -- combines Internet of Things technology and powerful analytics with science to create a new model for environmental monitoring and prediction. The project is building a computing platform that captures and analyzes data from a network of sensors tracking water quality and movement. These sensor data are combined with other monitoring and experimental data to create a thorough understanding of the factors that drive the lake's food web, hydrology, and water quality. More information about The Jefferson Project is available at https://jeffersonproject.rpi.edu/ In 2021, The Jefferson Project had twelve tributary monitoring stations around the lake collecting data on water quality, soil quality, and hydrology. These stations are TS_Finkle, TS_Hague, TS_Indian, TS_NorthwestBay, TS_Outlet, TS_PoleHill, TS_English, TS_Sunset, TS_Sucker, TS_ShelvingRock, TS_East, and TS_West. The stations have a sensor payload that may include some or all of the following sensors: YSI EXO2 Multi-parameter sonde, Campbell Scientific CS451 pressure transducer, SonTek-IQ+ multi-beam acoustic flow meter, Sontek-SL Doppler current meter, YSI WaterLOG® H-3123 submersible pressure transducer, and Stevens HydraProbe soil moisture sensor. The sensors collect data at high-frequency (~1 sample per minute) and the data are transferred in near real-time to off-site databases for monitoring and review by Jefferson Project researchers. The data provided here are level 4 data which underwent data correction and downsampling to an hourly frequency.
AquaMatch Chlorophyll a Data from Water Quality Portal: ~1970-2024
This dataset, “AquaMatch Chlorophyll a Data from Water Quality Portal ~1970-2024”, is a component of a forthcoming update to AquaSat (Ross et al., 2019), AquaSat version 2 (“v2”). The overarching purpose of AquaSat V2 is to emphasize the individual parts of the AquaSat pipeline that make-up the matchups between satellite and in-situ measurements. As such, we have greatly expanded and improved upon the AquaSat chlorophyll a dataset in two ways: First, we have incorporated additional recent in situ data beyond what was available at the publication of AquaSat. Second, we have created a data quality tiering system to provide end-users with more guidance on data usage. In this schema we have three tiers: restrictive data that are verifiably self-similar across organizations and time-periods and can be considered highly reliable; narrowed data that we have good reason to believe are self-similar, but for which we can not verify full compatibility across data providers; and inclusive data, which are assumed to be reliable and are harmonized to our best ability given the information available from the data provider. We have also added flag columns to help users understand complexities of the available depth and field sampling data. This dataset is a derived data product created using records downloaded from the Water Quality Portal (WQP) spanning January 6, 1970, to June 20, 2024. The WQP is a data warehouse for water-related data measured or observed within the United States and US Territories managed by the Environmental Protection Agency, United States Geological Survey, and the National Water Quality Monitoring Council. The dataset does not contain remote sensing matchups but can be paired with Landsat surface reflectances using the pipeline presented in Ross et al. (2019). Ross, M. R. V., Topp, S. N., Appling, A. P., Yang, X., Kuhn, C., Butman, D. et al. (2019). AquaSat: A data set to enable remote sensing of water quality for inland waters. Water Resources Research, 5
AquaMatch Dissolved Organic Carbon Data from Water Quality Portal: ~1970-2024
This dataset, “AquaMatch Dissolved Organic Carbon Data from Water Quality Portal ~1970-2024”, is a component of a forthcoming update to AquaSat (Ross et al., 2019), AquaSat version 2 (“V2”). The overarching purpose of AquaSat V2 is to emphasize the individual parts of the AquaSat pipeline that make-up the matchups between satellite and in-situ measurements. As such, we have greatly expanded and improved upon the AquaSat dissolved organic carbon dataset in two ways: First, we have incorporated additional recent in situ data beyond what was available at the publication of AquaSat. Second, we have created a data quality tiering system to provide end-users with more guidance on data usage. In this schema we have three tiers: restrictive data that are verifiably self-similar across organizations and time-periods and can be considered highly reliable; narrowed data that we have good reason to believe are self-similar, but for which we cannot verify full compatibility across data providers; and inclusive data, which are assumed to be reliable and are harmonized to our best ability given the information available from the data provider. We have also added flag columns to help users understand complexities of the available depth and field sampling data. This dataset is a derived data product created using records downloaded from the Water Quality Portal (WQP) spanning January 5, 1970, to June 27, 2024. The WQP is a data warehouse for water-related data measured or observed within the United States and US territories managed by the Environmental Protection Agency, United States Geological Survey, and the National Water Quality Monitoring Council. The dataset does not contain remote sensing matchups but can be paired with Landsat surface reflectances using the pipeline presented in Ross et al. (2019). Ross, M. R. V., Topp, S. N., Appling, A. P., Yang, X., Kuhn, C., Butman, D. et al. (2019). AquaSat: A data set to enable remote sensing of water quality for inland waters. Water
Missouri reservoir water quality data from the Statewide Lake Assessment Program (SLAP), the Lakes of Missouri Volunteer Program (LMVP), and the Reservoir Observer Student Scientists (ROSS) program
This dataset of limnological water quality data continues from Jones et al., 2024, starting in 2017 until 2021. It is from 195 reservoirs, the majority of which are in the state of Missouri (MO) in the USA collected by the University of Missouri Limnology Lab. Water quality parameters analyzed in the MU Limnology Lab during this time frame include: areal pigment absorption coefficient, alkalinity, alpha (light utilization efficiency P-E parameter), ammonium (NH4), ammonium-debt, anatoxin, chlorophyll a (corrected and uncorrected for pheophytins), chloride, cylindrospermopsin, seston d13C, seston d15N, dissolved turbidity, dissolved organic carbon, Ek (light saturation P-E parameter), FVFM (maximum quantum yield of PSII for photochemistry), gross primary production, microcystin, nitrate & nitrite (NO3), nitrate-debt, particulate nitrogen, particulate phosphorus, phosphorus-debt, pheophytin, particulate carbon, particulate inorganic matter, particulate organic matter, phycocyanin (PHYCO), saxitoxin, Secchi disk depth, silica, soluble reactive phosphorus, total dissolved nitrogen (TDN), total dissolved phosphorus (TDP), total nitrogen (TN), total phosphorus (TP), total suspended solids (TSS), and urea. Most of the samples were collected during the summer months (May-September) when the reservoirs were thermally stratified, but a few were taken during the rest of the year (October-April). The majority of samples were taken at the deepest point in the reservoir directly up-reservoir of the dam. Sampling was conducted from a boat most of the time, but a few samples were taken from shorelines and drinking water treatment intake pipes. Most of the data come from the Statewide Lake Assessment Project (SLAP) and the Lakes of Missouri Volunteer Program (LMVP) funded by the Missouri Department of Natural Resources. This data represents duplicate or triplicate water samples collected from either the water surface, integrated over the depth of the epilimnion, or from discrete dep
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.