Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
44
datasets available to search
ShareScore release 0.9.0
Dataset results
44 results for “field sampling data”
MMS 1 Search Coil Magnetometer (SCM) AC Magnetic Field Level 2 (L2), Survey Mode, 32 Sample/s Data
Search Coil Magnetometer (SCM) AC Magnetic Field (32 samples/s), Level 2, Survey Mode Data. The tri-axial Search-Coil Magnetometer with its associated preamplifier measures three-dimensional magnetic field fluctuations. The analog magnetic waveforms measured by the SCM are digitized and processed inside the Digital Signal Processor (DSP), collected and stored by the Central Instrument Data Processor (CIDP) via the Fields Central Electronics Box (CEB). Prior to launch, all SCM Flight models were calibrated by LPP team members at the National Magnetic Observatory, Chambon-la-Foret (Orleans). Once per orbit, each SCM transfer function is checked thanks to the onboard calibration signal provided by the DSP. The SCM is operated for the entire MMS orbit in survey mode. Within scientific Regions Of Interest (ROI), burst mode data are also acquired as well as high speed burst mode data. This SCM data set corresponds to the AC magnetic field waveforms in nanoTesla and in the GSE frame. The SCM instrument paper can be found at http://link.springer.com/article/10.1007/s11214-014-0096-9 and the SCM data product guide at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.
MMS 1 Search Coil Magnetometer (SCM) AC Magnetic Field Level 2 (L2), Burst Mode, 8192 Sample/s Data
Search Coil Magnetometer (SCM) AC Magnetic Field (8192 samples/s), Level 2, Burst Mode Data. The tri-axial Search-Coil Magnetometer with its associated preamplifier measures three-dimensional magnetic field fluctuations. The analog magnetic waveforms measured by the SCM are digitized and processed inside the Digital Signal Processor (DSP), collected and stored by the Central Instrument Data Processor (CIDP) via the Fields Central Electronics Box (CEB). Prior to launch, all SCM Flight models were calibrated by LPP team members at the National Magnetic Observatory, Chambon-la-Foret (Orleans). Once per orbit, each SCM transfer function is checked thanks to the onboard calibration signal provided by the DSP. The SCM is operated for the entire MMS orbit in survey mode. Within scientific Regions Of Interest (ROI), burst mode data are also acquired as well as high speed burst mode data. This SCM data set corresponds to the AC magnetic field waveforms in nanoTesla and in the GSE frame. The SCM instrument paper for SCM can be found at http://link.springer.com/article/10.1007/s11214-014-0096-9 and the SCM data product guide at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.
Van Allen Probe B Electric Field and Waves Suite (EFW) Burst Mode 1 (512 Samples/sec) Electric and Magnetic Fields, Waveform, in Spacecraft Spin (UVW) Coordinates, Level 1 (L1), 1.95 ms Data
The EFW Burst Modes provide targeted Measurements over Brief Time Intervals of 3-D Electric Fields, 3-D Wave Magnetic Fields, and Spacecraft Potential. There are two EFW Burst Modes: BURST1 (B1), Medium-Rate 512 samples/s nominal and BURST2 (B2), Higher-Rate, 16384 samples/s nominal. The Burst 1 Mode Data includes three components of the Electric Field (E12_B1, E34_B1, E56_B1), six Components of the Spacecraft-Sensor Potential (V1_B1 through V6_B1), and three Components of the AC Magnetic Field (SCM_U_B1, SCM_V_B1, SCM_W_B1 from the EMFISIS Search Coil Magnetometer). The Burst 2 Mode Data returns a similar Complement of Electric Field (E_12ac_B2, E34ac_B2, E56ac_B2), Search Coil (SCM_B2, SCM_2B2, and SCM_B2 again from the EMFISIS Search Coil Magnetometer) and Single-ended Potential Measurements (V1ac_B1 through V6ac_B2) with the exception that in the Default Mode the Single-ended Potential and Electric Field Signals are AC coupled with a higher Gain. All Quantities are in "uvw" Coordinates where "u" and "v" are the Sensor Coordinates rotating with the Spacecraft and "w" points along the Spacecraft Spin Axis. Burst Waveform CDF Files are available. The three Data Types available are the Electric Field "E" the Searchcoil Magnetic Field "MSC" and Antenna Potential "V". The Suffix on each of these is either "B1" or "B2". B1 or Burst 1 is the Human-in-the-Loop Burst Type, meaning that both Collection and Playback (for arbitrary Lengths of Time) are requested on the Ground. B2 or Burst 2 is automatically telemetered as short Bursts based on an onboard Triggering Algorithm, typically set to trigger on large Amplitude Signals near 1 kHz. Sample Rates for B1 and B2 can and are changed depending on varying Science Goals.
Van Allen Probe A Electric Field and Waves Suite (EFW) Burst Mode 1 (512 Samples/sec) Electric and Magnetic Fields, Waveform, in Spacecraft Spin (UVW) Coordinates, Level 1 (L1), 1.95 ms Data
The EFW Burst Modes provide targeted Measurements over Brief Time Intervals of 3-D Electric Fields, 3-D Wave Magnetic Fields, and Spacecraft Potential. There are two EFW Burst Modes: BURST1 (B1), Medium-Rate 512 samples/s nominal and BURST2 (B2), Higher-Rate, 16384 samples/s nominal. The Burst 1 Mode Data includes three components of the Electric Field (E12_B1, E34_B1, E56_B1), six Components of the Spacecraft-Sensor Potential (V1_B1 through V6_B1), and three Components of the AC Magnetic Field (SCM_U_B1, SCM_V_B1, SCM_W_B1 from the EMFISIS Search Coil Magnetometer). The Burst 2 Mode Data returns a similar Complement of Electric Field (E_12ac_B2, E34ac_B2, E56ac_B2), Search Coil (SCM_B2, SCM_2B2, and SCM_B2 again from the EMFISIS Search Coil Magnetometer) and Single-ended Potential Measurements (V1ac_B1 through V6ac_B2) with the exception that in the Default Mode the Single-ended Potential and Electric Field Signals are AC coupled with a higher Gain. All Quantities are in "uvw" Coordinates where "u" and "v" are the Sensor Coordinates rotating with the Spacecraft and "w" points along the Spacecraft Spin Axis. Burst Waveform CDF Files are available. The three Data Types available are the Electric Field "E" the Searchcoil Magnetic Field "MSC" and Antenna Potential "V". The Suffix on each of these is either "B1" or "B2". B1 or Burst 1 is the Human-in-the-Loop Burst Type, meaning that both Collection and Playback (for arbitrary Lengths of Time) are requested on the Ground. B2 or Burst 2 is automatically telemetered as short Bursts based on an onboard Triggering Algorithm, typically set to trigger on large Amplitude Signals near 1 kHz. Sample Rates for B1 and B2 can and are changed depending on varying Science Goals.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.