Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
7,438
datasets available to search
ShareScore release 0.7.1
Dataset results
7,438 results for “surface”
Open Surface Drifter Data - Pirita river
<p>This dataset contains the surface drifter tracks collected in Pirita River (Estonia) to test the open drifter presented in the publication https://doi.org/10.3390/s22249918</p>
Initial Sample of HYPERNETS Hyperspectral Surface Reflectance Measurements for Satellite Validation from the Bare soil at Marquardt, Germany
<p>The HYPERNETS project (www.hypernets.eu) aims to ensure that high-quality in situ measurements are available to support the (VNIR/SWIR) optical Copernicus products. Therefore, it established a new autonomous hyperspectral spectroradiometer (HYPSTAR® - www.hypstar.eu) dedicated to land and water surface reflectance validation with instrument-pointing capabilities. In the prototype phase, the instrument is being deployed at 24 sites covering a range of water and land types and a range of climatic and logistic conditions. This dataset provides the first published data for the ATB HYPERNETS site in Marquardt, Germany [52°27'59.40"N, 12°57'35.16"E] (ATGE). It is a subset of the complete data record, consisting of the measurements which could be used for satellite validation. </p> <p>The provided NetCDF files are the L2A hypernets products with surface reflectances, their associated uncertainties and error-correlation information. The reflectance in the L2A products is the Hemispherical-directional Reflectance Factor (HDRF) defined as HDRF = π L / E where L is the directional upwelling radiance (with the field o, view of 5 dgrees), and E is the (hemispherical) downwelling irradiance (i.e. including both direct solar and diffuse sky irradiance). These reflectances have dimensions of wavelength and series, where each series is a set of measurements for a given geometry (combination of viewing zenith and azimuth angle). In addition to variables for wavelength and bandwidth, the files also contain variables that provide for each series the acquisition time, viewing and solar angles, number of valid scans used, and quality flags (typically, no flags are set in the data provided in this dataset). These NetCDF files also contain further relevant metadata as attributes. See https://hypernets-processor.readthedocs.io/ for further info.</p> <p>The HYPSTAR®-XR sensor was installed on 11 Oct 2022 at the top of a 5m mast on an extended 5 m horizontal boom to minimise interruption of the field of view. The boom faces South at the right angle towards bare soil. The mast is located at 52.466778°N, 12.959778°E. Data are collected every 30 minutes between 9:00 and 17:00 (UTC) from different zenith and azimuth angle.</p> <p>The HYPSTAR®-XR (eXtended Range) instruments deployed at each land HYPERNETS site consist of a VNIR and a SWIR sensor and autonomously collect data between 380-1700 nm at various viewing geometries and send it to a central server for quality control and processing. The VNIR sensor spans 1330 channels between 380 and 1000 nm with a FWHM of 3 nm, and the SWIR sensor has 220 channels between 1000 and 1700 nm with a FWHM of 10 nm. The hypernets_processor (Goyens et al. 2021; De Vis et al. in prep.) automatically processes all this data into various products, including the L2A surface reflectance product provided here. All products have associated uncertainties (divided into random and systematic uncertainties, including error-correlation information) which were propagated using the CoMet toolkit (www.comet-toolkit.org). </p> <p>To obtain this dataset, we start from the full ATGE data record and omit all the data that do not pass all quality checks performed as part of the hypernets_processor. In addition, an additional screening procedure was also developed to remove outliers and supply the best quality data suitable for satellite validation. To remove the outliers, a sigma-clipping method is used. First, reflectances are extracted in separate 2-hour windows throughout the day (to account for BRDF differences due to different solar positions) for four different wavelengths (500, 900, 1100 and 1600 nm). Outliers in these reflectances are then identified by iteratively calculating the mean reflectance trend with time (by binning the data per maximum of 30 data points), calculating the standard deviation from this trend, and masking any data that is more than three standard deviations away from the trend. This process is repeated on the unmasked data until the standard deviation does not vary by more than 5% between two iterations. The masks for the four different wavelengths are then combined (keeping only measurements for which none of the four wavelengths is an outlier). The reflectances and associated uncertainties for any masked series (i.e. a geometry that is masked either by the sigma-clipping procedure or from the masks of the hypernets_processor) are replaced by NaNs. Any sequence that has more than half of its series masked is removed entirely. </p>
Dataset for Activation of Glassy Carbon Surfaces by Alkaline Anodization Enhances Dopamine Adsorption and Electron-Transfer Kinetics
<p>This dataset provides the raw data to the manuscript</p><p><strong>"Activation of Glassy Carbon Surfaces by Alkaline Anodization Enhances Dopamine Adsorption and Electron-Transfer Kinetics"</strong></p><p>published in ChemElectroChem</p><p>Specifically, the following measurements are provided:</p><ul><li>Scanning electrochemical cell microscopy (SECCM). Cyclic voltammetry (E, i) data for each location across the sample. 5 cycles.</li><li>Chronoamperometry (i, t) for the anodization process.</li><li>Atomic Force Microscopy (AFM) topography.</li><li>Raman microscopy</li><li>X-ray photoelectron spectroscopy (XPS)</li><li>Scanning electron microscopy (SEM)</li></ul>
The Jefferson Project 2017 weather data from seven surface weather stations on Lake George, NY, USA.
The Jefferson Project at Lake George – a partnership between Rensselaer Polytechnic Institute, IBM Research, and Lake George Association – combines Internet of Things technology and powerful analytics with science to create a new model for environmental monitoring and prediction. The project is building a computing platform that captures and analyzes data from a network of sensors tracking water quality and movement. These sensor data are combined with other monitoring and experimental data to create a thorough understanding of the factors that drive the lake’s food web and overall water quality. More information about The Jefferson Project is available at https://jeffersonproject.rpi.edu/ In 2017, The Jefferson Project had five weather monitoring stations around the lake collecting data on precipitation, temperature, wind, and air quality. These stations are 'WX-CedarLane', 'WX-DFWI', 'WX-GullRock', 'WX-MossyPoint' and 'WX-WhaleRock'. Weather data from two vertical profiler sites, 'VP-AnthonysNose' and 'VP-TeaIsland', are also included in this dataset. The stations have a sensor payload that include some combination of the following sensors: HC2-S3 sensor, Campbell Scientific CS616 soil moisture sensor, LiCor LI-200R pyranometers, RM Young 85006 anemometer, Vaisala Weather Transmitter WXT series (520 & 530 models), HyQuest TB3 tipping bucket rain gauge, N-Con wet deposition sampler. The sensors collect data at high-frequency (~1 sample per minute) and the data is transferred in near real-time to off-site databases for monitoring and review by Jefferson Project researchers. Data provided is level 4 data which has undergone data correction and down sampling to an hourly frequency.
Marcell Experimental Forest chemistry of surface water draining the S2 catchment, 1986 - ongoing
This data set is a record since 1986 of chemistry for surface water draining the S2 catchment at the Marcell Experimental Forest (MEF) in Itasca County, Minnesota. Unfiltered water is usually collected every one or two weeks as part of the long-term monitoring program of the S2 catchment. Some samples were collected more often for various other studies and are included in this data set. Samples are routinely measured for pH, specific conductivity, anions (chloride, sulfate), cations (calcium, magnesium, potassium, sodium, aluminum, iron, manganese, strontium), silicon, nutrients (ammonium, nitrate+nitrite, soluble reactive phosphorus, total nitrogen, total phosphorus), and total organic carbon. Occasionally, stable water and mercury isotopes as well as concentrations of dissolved organic carbon (DOC), bacterial respiration of dissolved organic matter, biodegradable DOC (BDOC), ferrous and ferric iron, total mercury (filtered or unfiltered), methylmercury (filtered or unfiltered), and lead were measured. Ultraviolet (UV) absorbance, a measure of water color or dissolved organic matter optical properties, was also measured for some samples. More solutes and values will be added as additional metadata are documented (pre-1986 to 1992), water samples are collected and analyzed (concentrations and isotopes), or archived water samples are analyzed for stable water isotopes. The MEF is operated and maintained by the USDA Forest Service, Northern Research Station.
The Jefferson Project 2018 weather data from eight surface weather stations on Lake George, NY, USA.
The Jefferson Project at Lake George -- a partnership between Rensselaer Polytechnic Institute, IBM Research, and Lake George Association -- combines Internet of Things technology and powerful analytics with science to create a new model for environmental monitoring and prediction. The project is building a computing platform that captures and analyzes data from a network of sensors tracking water quality and movement. These sensor data are combined with other monitoring and experimental data to create a thorough understanding of the factors that drive the lake's food web, hydrology, and water quality. More information about The Jefferson Project is available at <https://jeffersonproject.rpi.edu/> In 2018, The Jefferson Project had six weather monitoring stations around the lake collecting data on precipitation, temperature, wind, and air quality. These stations are WX_CedarLane, WX_DFWI, WX_PilotKnob, WX_GullRock, WX_MossyPoint, and WX_WhaleRock. Weather data from two vertical profiler sites, VP_AnthonysNose and VP_TeaIsland, are also included in this dataset. The stations have a sensor payload that include some combination of the following sensors: Rotronic HC2-S3 sensor, Campbell Scientific CS616 soil moisture sensor, Li-Cor LI-200R pyranometers, RM Young 85006 anemometer, Vaisala Weather Transmitter WXT series (520 & 530 models), HyQuest TB3 tipping bucket rain gauge, N-Con wet deposition sampler. The sensors collect data at high-frequency (~1 sample per minute) and the data is transferred in near real-time to off-site databases for monitoring and review by Jefferson Project researchers. Data provided is level 4 data which has undergone data correction and downsampling to an hourly frequency.
The Jefferson Project 2019 weather data from ten surface weather stations on Lake George, NY, USA.
The Jefferson Project at Lake George – a partnership between Rensselaer Polytechnic Institute, IBM Research, and Lake George Association – combines Internet of Things technology and powerful analytics with science to create a new model for environmental monitoring and prediction. The project is building a computing platform that captures and analyzes data from a network of sensors tracking water quality and movement. These sensor data are combined with other monitoring and experimental data to create a thorough understanding of the factors that drive the lake's food web, hydrology, and water quality. More information about The Jefferson Project is available at https://jeffersonproject.rpi.edu/ In 2019, The Jefferson Project had seven weather monitoring stations around the lake collecting data on precipitation, temperature, wind speed, wind direction, barometric pressure, and relative humidiity. These stations are WX_CedarLane, WX_DFWI, WX_GullRock, WX_MossyPoint, WX_WhaleRock, WX_PilotKnob, and WX_Glenburnie. Weather data from three vertical profiler sites (VP_AnthonysNose, VP_CalvesPen, and VP_TeaIsland) are also included in this dataset. The stations have a sensor payload that include some combination of the following sensors: Rotronic HC2-S3 sensor, Campbell Scientific CS616 soil moisture sensor, Li-Cor LI-200R pyranometers, RM Young 85006 anemometer, Vaisala Weather Transmitter WXT series (520 & 530 models), HyQuest TB3 tipping bucket rain gauge, N-Con wet deposition sampler. The sensors collect data at high-frequency (~1 sample per minute) and the data is transferred in near real-time to off-site databases for monitoring and review by Jefferson Project researchers. Data provided is level 4 data which has undergone data correction and downsampling to an hourly frequency.
The Jefferson Project 2020 weather data from seven surface weather stations on Lake George, NY, USA.
The Jefferson Project at Lake George – a partnership between Rensselaer Polytechnic Institute, IBM Research, and Lake George Association – combines Internet of Things technology and powerful analytics with science to create a new model for environmental monitoring and prediction. The project is building a computing platform that captures and analyzes data from a network of sensors tracking water quality and movement. These sensor data are combined with other monitoring and experimental data to create a thorough understanding of the factors that drive the lake's food web, hydrology, and water quality. More information about The Jefferson Project is available at https://jeffersonproject.rpi.edu/ In 2020, The Jefferson Project had seven weather monitoring stations around the lake collecting data on precipitation, temperature, wind speed, wind direction, barometric pressure, and relative humidiity. These stations are WX_CedarLane, WX_DFWI, WX_GullRock, WX_MossyPoint, WX_WhaleRock, WX_PilotKnob, and WX_Glenburnie. The stations have a sensor payload that include some combination of the following sensors: Rotronic HC2-S3 sensor, Campbell Scientific CS616 soil moisture sensor, Li-Cor LI-200R pyranometers, RM Young 85006 anemometer, Vaisala Weather Transmitter WXT series (520 & 530 models), HyQuest TB3 tipping bucket rain gauge, and N-Con wet deposition sampler. The sensors collect data at high-frequency (~1 sample per minute) and the data are transferred in near real-time to off-site databases for monitoring and review by Jefferson Project researchers. The data provided here are level 4 data which has undergone data correction and downsampling to an hourly frequency.
Near-surface, soil, and air temperature data acquired across multiple locations on the San Joaquin Experimental Range, California, 2011-2017
These temperature records were collected as part of a larger study relating microclimates to tree seedling survival in southern California mountains. These temperature records are for studies at the San Joaquin Experimental Range (Lat 37.083, Long -119.716, elevation 210-520 m, www.fs.fed.us/psw/ef/san_joaquin/). Temperature sensors were located at 23 sites across the landscape. Sites were selected to sample topographic variation in surface and air temperatures within a narrow range of elevations on northeast to southwest-facing slopes, ridges, and valleys. To characterize surface temperature variation within a site, 21 sensors were arranged in an identical pattern around and in six, 5x5 m experimental gardens. An additional 18 sensors were placed along three transects over the landscape running E-W. They were placed strategically to sample topographic inflection points (hill tops and valley bottoms) as well as north and south facing slopes. Temperatures were recorded on a 10 or 20-minute interval, depending on the sensor, using HOBO (Onset, www.onsetcomp.com) devices.
Near-surface, soil, and air temperature data acquired across multiple locations in the Teakettle Experimental Forest, California, 2011-2017
These temperature records were collected as part of a larger study relating microclimates to tree seedling survival in southern California mountains. These temperature records are for studies at the Teakettle Experimental Forest (Lat 36.967, Long -119.017, elevation 2000-2800 m, www.fs.fed.us/psw/ef/teakettle/). Temperature sensors were located at 44 sites across the landscape. Sites were selected to sample topographic variation in surface and air temperatures within a narrow range of elevations on northeast to southwest-facing slopes, ridges and valleys. To characterize surface temperature variation within select sites, 21 sensors were arranged in an identical pattern around and in six, 5x5 m experimental gardens (see garden schematic for details). An additional 33 sites were located across the site by way of a stratified sampling scheme which targeted low, medium, and high elevation areas, low, medium, and high radiation areas, and cold air pooling areas. In June 2012, in order to concentrate sensors in a smaller study area (ease of access and to make this more similar to other sites, 22 sites were "retired," and 7 new sites were installed, for a total of 18 during the remainder of the study. Temperatures were recorded on a 10 or 20-minute interval, depending on the sensor. using HOBO (Onset, www.onsetcomp.com) devices.
Geochemical Characterizations for Identifying Fugitive Dust Deposition and Enrichment of Surface and Subsurface Subalpine Soils from Phosphorus Mining, Eastern Ashley National Forest, Utah, 2022-2023.
Phosphorus is a non-renewable resource essential for all life. Anthropogenic alterations to the phosphorus cycle have led to widespread phosphorus pollution, and the unsustainable management of P has led to the threat of global depletion of phosphorus resources. Thus, accounting for the natural and anthropogenic flow paths of phosphorus is essential for its conservation and pollution reduction. One such source of human alteration to the phosphorus-cycle is phosphate rock mining. Mining, however, has many adverse environmental effects, including widespread fugitive dust emissions. Dust collection in the Ashley National Forest of northeastern Utah, proximate to a surface phosphorus mine, has shown phosphorus concentrations in dust more than four times that of other regional samples. Elevated phosphorus in dust near active surface mining suggests that mining emissions may alter the natural phosphorus loading of the soils in the National Forest through dust deposition; however, no research has been done to identify the abundance and range of mine-attributable phosphorus enrichment in the soils surrounding phosphate mining activities. The combined geospatial and geochemical approach of this study shows that surface soil phosphorus concentrations were found to be enriched above naturally occurring levels up to 6.5 km from mining activity (enrichment factor > 1.5), with the most significant enrichment occurring within the first 3 km (enrichment factor > 2). On average, surface phosphorus concentrations were significantly enriched by 25% within 6.5 km of phosphorus mining activity. Observed phosphorus enrichment was positively correlated with the presence of fluorapatite in the soil, which is the primary phosphorus-mineral extracted from the nearby mine. Further, bioavailable phosphorus concentrations were also higher for the soils that were enriched in phosphorus. This study shows that fugitive emissions associated with the surface mining of phosphate rock are a significan
National Park Service - South Florida/Caribbean Inventory & Monitoring Network - BISC1 SET Surface Water level data from in Biscayne National Park, Florida, USA (2016-2025)
Surface water level data (m) was collected in Biscayne National Park (BISC) by the South Florida/Caribbean Inventory and Monitoring Network (SFCN) as part of the Soil Elevation Table (SET) vital sign monitoring program. Water level data collected from 2016 to 2025 is included in this dataset. The water level data was collected using HOBOware Onset Water Level Data Loggers. This dataset belongs to Site 1, known as BISC-SET-1 or BISC1. This data-package is complete.
National Park Service - South Florida/Caribbean Inventory & Monitoring Network - BISC2 SET Surface Water level data from in Biscayne National Park, Florida, USA (2017-2025)
Water level data (m) was collected in Biscayne National Park (BISC) by the National Park Service - South Florida/Caribbean Inventory and Monitoring Network (SFCN) as part of the Soil Elevation Table (SET) vital sign monitoring program. Water level data collected from 2017-2025 is included in this dataset. The water level data was collected using HOBOware Onset Water Level Data Loggers. This dataset belongs to Site 2, known as BISC-SET-2 or BISC2. This data-package is complete.
National Park Service - South Florida/Caribbean Inventory & Monitoring Network - SARI SET Surface Water level data from Salt River Bay National Historical Park and Ecological Preserve, St. Croix, US Virgin Islands.
Surface water level data (m) was collected in Salt River Bay National Historic Park and Ecological Preserve (SARI) by the South Florida/Caribbean Inventory and Monitoring Network (SFCN) as part of the Soil Elevation Table (SET) vital sign monitoring program. Water level data collected from 2017 to 2024 is included in this dataset. The water level data was collected using HOBOware Onset Water Level Data Loggers. This data-package is complete.
National Park Service - South Florida/Caribbean Inventory & Monitoring Network - Mary's Point SET Surface Water level data from Virgin Islands National Park, St. John, US Virgin Islands
Surface water level data (m) was collected in Virgin Islands National Park, Mary's Point (MARY) by the South Florida/Caribbean Inventory and Monitoring Network (SFCN) as part of the Soil Elevation Table (SET) vital sign monitoring program. Water level data collected from 2017 to 2024 is included in this dataset. The water level data was collected using HOBOware Onset Water Level Data Loggers. This data-package is complete.
National Park Service - South Florida/Caribbean Inventory & Monitoring Network - Water Creek SET Surface Water level data from Virgin Islands National Park, St. John, US Virgin Islands
Surface water level data (m) was collected in Virgin Islands National Park, Water Creek (WACR) by the South Florida/Caribbean Inventory and Monitoring Network (SFCN) as part of the Soil Elevation Table (SET) vital sign monitoring program. Water level data collected from 2017 to 2024 is included in this dataset. The water level data was collected using HOBOware Onset Water Level Data Loggers. This data-package is complete.
Sulfate Concentrations and Sulfur Stable Isotope Ratios in Surface Water from the Marlborough and Waipara Winegrowing Regions, South Island of New Zealand, 2023
Agricultural sulfur (S) additions are a major anthropogenic source of S to the environment, yet our understanding of the downstream transformations and potential environmental consequences of these S inputs remains incomplete. This dataset includes surface water samples from the Marlborough and Waipara winegrowing regions of the South Island of New Zealand, where frequent applications of S fungicide are widespread. Samples were analyzed for sulfate concentration and S stable isotope ratios – the combination of which forms the S “fingerprint”. We collected surface water samples during the winter of 2023 from a variety of different locations and land use types, including vineyards, forests, pastures, and urban areas. The data table includes water sample sulfate concentrations, sulfate-S stable isotope measurements, and the S stable isotope composition of commonly used S-containing fungicides and fertilizers for comparison.
Stream metabolism estimates and surface water chemistry in Glenbrook Creek (NV) and Blackwood Creek (CA) in the Lake Tahoe Basin, 2021-2024
The goal of this project was to develop a process-based understanding of how in-stream productivity and nitrogen dynamics respond to hydroclimatic volatility. We used a combined approach of high-frequency sensor deployment and maintenance, ecosystem metabolism modeling, and routine monitoring of water chemistry and other parameters. The data we collected as part of this project demonstrate how variable ecosystem productivity is in time and space in within and among mountain streams. Although maintenance of the sensor arrays during the exceptionally wet winter of 2023 was challenging, we were able to estimate a time series of stream metabolism within the upper and lower reaches of two streams with different basin characteristics and through hydroclimatic conditions (2021 to 2024). Throughout this project we: 1. We generated four years of daily estimates of ecosystem metabolism (gross primary productivity, ecosystem respiration, and net ecosystem productivity) from upper and lower reach stations on both the east and west shores of the Lake Tahoe Basin. 2. We measured ammonium (NH4+) and nitrate (NO3-) concentrations in surface water and sediment samples from both Glenbrook and Blackwood creeks. 3. We modeled nitrogen supply and demand dynamics at each reach location. See this git code repository for project analysis: https://github.com/kellyloria/Mountain-stream-biogeochem-and-productivity.
Dissolved greenhouse gas concentrations derived from the NEON dissolved gases in surface water data product (DP1.20097.001)
This dataset contains partial pressure and molar concentration of dissolved carbon dioxide, methane, and nitrous oxide in 34 streams, rivers, and lakes calculated from headspace equilibration samples collected by the National Ecological Observatory Network (NEON). All input data were collected by NEON and is available on the NEON data portal at https://data.neonscience.org. Specifically, in situ dissolved gas concentrations were calculated from the air and headspace mixing ratios provided by the NEON Dissolved gases in surface water data product (DP1.20097.001), adjusted for sample and water temperature (DP1.20097.001, DP1.20264.001, DP1.20053.001), barometric pressure (DP1.20097.001, DP1.00004.001), and alkalinity (DP1.20093.001). The final set of inputs is found in the file, input_file, and the processing scripts are available at https://github.com/kellyaho/NEON-GHG-processing. The file, output_file, contains the raw outputs from running the input_file through the processing scripts. There are three outputs for each gas for each sample, one for each of three different pre-equilibration headspace mixing ratios (paired atmospheric samples, loess smoothing of atmospheric samples, and site-specific median). The file, GHG_final, contains the final dataset. This GHG_final uses the outputs from output_file calculated with paired atmospheric samples, and substitutes 0.01 μatm, 0.001 μM, 0.001 μatm, and 0.001 μM for any negative instances of pCH4, [CH4], pN2O, and [N2O], respectively. See methods for more detail. Please cite the NEON data inputs (listed below), in addition to this dataset, when using the data. NEON is sponsored by the National Science Foundation (NSF) and operated under cooperative agreement by Battelle. This material is based in part upon work supported by NSF through the NEON Program.
Composited land surface temperature of the greater Phoenix, Arizona, USA metropolitan area and surrounding Sonoran desert derived from cloud-free, summer (June, July, and August) Landsat imagery: 1985-2020
This project calculates land surface temperature (LST) from remotely sensed imagery. The intent is to extend the previous version of the LST data for the CAP LTER study area in central Arizona, USA to include 2020 and update the products so that they are based on a composite of images from each year (all available cloud-free acquisitions from June, July, and August) in the analysis to reduce the potential for outlier images or pixels to impact analyses. The aim is to make updated LST data accessible to stakeholders and researchers studying the greater Phoenix, Arizona, USA metropolitan area. LST is calculated from cloud-free Landsat 5 and 8 imagery (30m resolution) from summer months (June, July, and August) in 1985, 1990, 1995, 2000, 2005, 2010, 2015, and 2020. All images are cropped to the CAP LTER study area boundary.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.