Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
121
datasets available to search
ShareScore release 0.9.0
Dataset results
121 results for “TOA”
CERES ERBE-like Instantaneous TOA Estimates Aqua FM3 Edition4
CER_ES8_Aqua-FM3_Edition4 is the Clouds and the Earth's Radiant Energy System (CERES) Earth Radiation Budget Experiment (ERBE)-like Instantaneous Top-of-the-Atmosphere (TOA) Estimates Aqua Flight Model 3 (FM3) Edition 4 data product, which was collected using the CERES-FM3 instrument on the Aqua platform. Data collection for this product is ongoing.The ERBE-like Footprint TOA Fluxes (ES-8) product contains 24 hours of instantaneous CERES data for a single scanner instrument, FM3, on the Aqua spacecraft. The ES-8 contains filtered radiances recorded every 0.01-second for the total (TOT), shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW and LW radiances at spacecraft altitude are converted to TOA fluxes with a scene identification algorithm and Angular Distribution Models (ADMs), which are "like" those used for the ERBE. The TOA fluxes, scene identification, and angular geometry are included in the ES-8.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions are a follow-on to the successful ERBE mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Time-Interpolated TOA Fluxes, Clouds and Aerosols Daily NOAA-20 Edition1C
CER_SSF1deg-Day_NOAA20-VIIRS_Edition1C is the NOAA-20 Clouds and the Earth's Radiant Energy System (CERES) Level 3 Single Scanner Footprint (SSF) Edition1C Top of Atmosphere (ToA) flux data product. The SSF One Degree (SSF1deg) Day provides daily averages on a 1-degree latitude and longitude global grid from the NOAA-20 CERES Flight Model 6 (FM-6) data. The last CERES instrument, FM-6, was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now known as NOAA-20, on November 18, 2017. The data product begins May 1, 2018. The product is distributed in monthly Hierarchical Data Format (HDF) 4 files. The file contains the daily mean for each day of the month and provides global coverage over a day.The SSF1deg-Day granule contains daily averages of regional CERES FM6 Earth-viewing Top of Atmosphere (ToA) shortwave and longwave fluxes. The fluxes are converted from the unfiltered CERES radiances at the footprint level using the co-located Visible Infrared Imaging Radiometer Suite (VIIRS) imager-defined scene. The footprint fluxes are gridded at hourly periods and then temporally interpolated assuming constant meteorology between measurements. The ToA fluxes are provided for both clear-sky and total sky conditions. The incoming daily solar irradiance is from the Solar Radiation and Climate Experiment (SORCE) and Total Solar Irradiance (TSI). The VIIRS radiances are used with CERES-specific cloud mask and cloud property retrievals and are stratified into four atmospheric layers: surface to 700 mb, 700 mb to 500 mb, 500 to 300 mb, and above 300 mb along with the total. Each cloud layer has properties such as amount, height, temperature, pressure, optical depth, emissivity, phase, water path, and water particle size. The cloud properties are averaged for day and night (24-hour) and day-only periods.This product uses the instantaneous gridded product, CER_SSF1deg-Hour_NOAA20-VIIRS_Edition1C, as input.
CERES Daily Daytime Mean Regionally Averaged NOAA-20 TOA Fluxes and Associated Cloud Properties Stratified by Optical Depth and Effective Pressure Edition1B
CER_FluxByCldTyp-Day_NOAA20-VIIRS_Edition1B is the Clouds and the Earth's Radiant Energy System (CERES) Monthly Daytime Mean Regionally Averaged NOAA-20 Top-of-Atmosphere (TOA) Fluxes and Associated Cloud Properties Stratified by Optical Depth and Effective Pressure Edition 1B data product. Data was collected using CERES Flight Model 6 (FM6) and Visible Infrared Imaging Radiometer Suite (VIIRS) on NOAA-20. Data collection for this product is ongoing. CER_FluxByCldTyp-Day_NOAA20-VIIRS_Edition1B provides the monthly mean daytime CERES fluxes and CERES-VIIRS cloud properties that have been spatially gridded into 1° regions along both the NOAA-20 ground tracks where the TOA fluxes and cloud properties have been stratified by six cloud optical depth bins and seven cloud effective pressure layers. The CERES FluxByCldTyp-Day Edition1B product inputs Single Scanner Footprint (SSF) Edition1B footprint data. Within each footprint, all 1-km pixel-level VIIRS-retrieved cloud properties are stratified into three possible sub-footprint components: two cloud layers and a clear portion. The VIIRS channel radiances are converted to broadband (BB) radiances for each sub-footprint component. The CERES angular directional models are then applied to obtain BB fluxes. Each CERES sub-footprint cloud layer and associated fluxes are assigned to one of the 42 cloud types, similar to the stratification process in the CldTypHist product. FluxByCloudTyp is an hourly instantaneous gridded daytime-only product with a global extent. Each netCDF4 file covers a month.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the proto flight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit onboard the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched onboard Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched onboard the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched onboard the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Daily Terra-Aqua Edition4A
CER_SYN1deg-Day_Terra-Aqua-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Daily Terra-Aqua Edition4A data product. Data was collected using several instruments on multiple platforms, including CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer on Terra; and FM3, FM4 CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Aqua. Data collection for this product is ongoing.The CERES Synoptic Radiative Fluxes and Clouds (SYN) 1degree products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a daily temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions. The CERES SYN1deg products use 1-hourly radiances and cloud property data from GEO imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols 1-Hourly Terra-Aqua-NOAA20 Edition4B
CER_SYN1deg-1Hour_Terra-Aqua-NOAA20_Edition4B is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO) Top-of-Atmosphere (TOA) Within-Atmosphere and Surface Fluxes, Clouds, and Aerosols 1-Hourly Terra-Aqua-NOAA20 Edition4B data product. Data was collected using several instruments on multiple platforms including CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; CERES FM3, CERES FM4, CERES Scanner, and MODIS on Aqua; and FM6, and VIIRS on NOAA-20. Data collection for this product is ongoing.The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated top-of-atmosphere (TOA) radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrow-band to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Daily Terra Edition4A
CER_SYN1deg-Day_Terra-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA) and Surface Fluxes, Clouds and Aerosols Daily Terra Edition4A data product. Data was collected using CERES Imaging Radiometers on Geostationary Satellites as well as CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer on Terra. Data collection for this product is complete. Note: It is highly recommended to use this product (CER_SYN1deg-Day_Terra-MODIS_Edition4A) in conjunction with CER_SYN1deg-Day_Terra-Aqua-MODIS_Edition4A when doing science-quality research. The CERES Synoptic Radiative Fluxes and Clouds (SYN) 1degree products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The calculated fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a daily temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions. The CERES SYN1deg products use 1-hourly radiances and cloud property data from GEO imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrow-band to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Time-Interpolated TOA Fluxes, Clouds and Aerosols Daily Aqua Edition4A
CER_SSF1deg-Day_Aqua-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) Time-Interpolated Top of Atmosphere (TOA) Fluxes, Clouds and Aerosols Daily Aqua Edition4A data product, which was collected using the CERES-Flight Model 3 (FM3) and FM4 instruments on the Aqua platform. Data collection for this product is in progress.CERES Single Scanner Footprint one degree (SSF1deg) Day provides daily averages of regional constant meteorology temporally interpolated TOA fluxes, clouds derived from a co-located imager, and aerosols on a 1-degree latitude and longitude grid. This single satellite product uses the primary CERES instrument in cross-track mode. TOA fluxes are provided for clear-sky and all-sky conditions for longwave (LW), shortwave (SW), and window (WN) wavelength bands. The incoming solar daily irradiance is from the SOlar Radiation and Climate Experiment (SORCE) and Total Solar Irradiance (TSI). The cloud properties are averaged for day and night (24-hour) and day-only periods. Cloud properties are stratified into four atmospheric layers (surface-700 hPa, 700 hPa - 500 hPa, 500 hPa - 300 hPa, 300 hPa - 100 hPa) and all layers. The aerosols are averaged instantaneous values from the co-located imager. CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols 1-Hourly Terra-Aqua Edition4A
CER_SYN1deg-1Hour_Terra-Aqua-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO) Top-of-Atmosphere (TOA) Within-Atmosphere and Surface Fluxes, Clouds, and Aerosols 1-Hourly Terra-Aqua Edition4A data product. Data was collected using several instruments on multiple platforms, including CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM3, FM4, CERES Scanner, and MODIS on Aqua. Data collection for this product is ongoing.The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated top-of-atmosphere (TOA) radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrow-band to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Single Scanner Footprint (SSF) TOA/Surface Fluxes, Clouds and Aerosols Aqua-FM4 Edition4A
CER_SSF_Aqua-FM4-MODIS_Edition4A is the CERES Single Scanner Footprint (SSF) TOA/Surface Fluxes, Clouds and Aerosols Aqua-Flight Model 4 (FM4) Edition4A data product. This data was obtained from the CERES-FM4 Instrument on the Aqua platform. Data collection for this product is complete.The Single Scanner Footprint (SSF) TOA/Surface Fluxes, Clouds, and Aerosols product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM, Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua, and Visible Infrared Imaging Radiometer Suite (VIIRS) on Suomi-NPP. Scene identification and cloud properties are defined at the higher imager resolution, and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and, for each layer, the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES-filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager-defined scene. These TOA fluxes are used to estimate surface fluxes. On the SSF, only footprints with adequate imager coverage are included, which is much less than the full set of footprints on the CERES ES-8 product.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Regionally Averaged TOA Fluxes, Clouds and Aerosols Hourly NOAA-20 Edition 1C
CER_SSF1deg-Hour_NOAA20-VIIRS_Edition1C is the NOAA-20 Clouds and the Earth's Radiant Energy System (CERES) Level 3 Single Scanner Footprint (SSF) Edition1C observed Top of Atmosphere (ToA) broadband radiances and fluxes data product. The SSF One Degree (SSF1deg) Hour provides data hourly on a 1-degree latitude and longitude global grid from the NOAA-20 CERES Flight Model 6(FM6) instantaneous footprint data. The last CERES instrument, Flight Model (FM) 6, was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now known as NOAA-20, on November 18, 2017. The data product begins May 1, 2018, and is in progress. The product is distributed in daily Hierarchical Data Format (HDF) 4 files. The file contains data, where observed, for each 24 hours of the day and provides global coverage over a day.The SSF1deg-Hour granule contains instantaneous gridded CERES FM6 Earth viewing unfiltered radiances for the shortwave (SW), longwave (LW) (determined from the difference between total and SW), and LW channel broadband. The SW, LW, and LW-channel radiances at spacecraft altitude are converted to Top of Atmosphere (ToA) fluxes based on the co-located Visible Infrared Imaging Radiometer Suite (VIIRS) imager-defined scene. The ToA fluxes are provided for both clear-sky and total-sky conditions. The incoming daily solar irradiance is from the Solar Radiation and Climate Experiment (SORCE) and Total Solar Irradiance (TSI). These ToA fluxes are used to estimate surface fluxes. The VIIRS radiances are used with CERES-specific cloud mask, and cloud property retrievals are stratified into four atmospheric layers: surface to 700 mb, 700 mb to 500 mb, 500 to 300 mb, and above 300 mb along with the total. Each cloud layer has properties such as amount, height, temperature, pressure, optical depth, emissivity, phase, water path, and water particle size. The cloud properties are averaged for day and night (24-hour) and day-only periods.This product uses the instantaneous footprint-level product, CER_SSF_NOAA20-VIIRS_Edition1C, as input. It is the basis for the SSF1deg-Day and SSF1deg-Month NOAA20-VIIRS_Edition1C products, which provide daily and monthly averages by temporally interpolating between CERES observations.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly Terra-NOAA20 Edition4A
CER_SYN1deg-Month_Terra-NOAA20_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top of Atmosphere (TOA), Within-Atmosphere, and Surface Fluxes, Clouds and Aerosols Monthly Terra-NOAA20 Edition4A data product. Data was collected using the following instruments and platforms: Imaging Radiometers on the Geostationary Satellites platform, CERES Flight Model 1 (FM1), CERES FM2, CERES Scanner, and MODIS on Terra; and CERES FM6 and VIIRS on NOAA-20. Data collection for this product is ongoing.CERES Synoptic (SYN) 1-degree products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, VIIRS, and geostationary satellite cloud properties along with atmospheric profiles provided by the NASA Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a three-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to accurately model variability between CERES observations. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a critical Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Single Scanner Footprint (SSF) TOA/Surface Fluxes, Clouds and Aerosols Terra-FM2 Edition4A
CER_SSF_Terra-FM2-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) Single Scanner Footprint (SSF) Top-of-the-Atmosphere (TOA)/Surface Fluxes, Clouds and Aerosols Terra- Flight Model 2 (FM2) Edition 4A data product, which was collected using the CERES-FM2 instrument on the Terra platform. Data collection for this product is in progress.CERES SSF TOA/Surface Fluxes are data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on the Tropical Measuring Mission (TRMM), Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua, and Visible Infrared Imaging Radiometer Suite (VIIRS) on Suomi- National Polar-orbiting Partnership (NPP). Scene identification and cloud properties are defined at the higher imager resolution, and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and, for each layer, the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES-filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to TOA fluxes based on the imager-defined scene. These TOA fluxes are used to estimate surface fluxes. On the SSF, only footprints with adequate imager coverage are included, which is much less than the full set of footprints on the CERES ES-8 product.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Energy Balanced and Filled (EBAF) TOA and Surface Monthly means data in netCDF Edition 4.2
CERES_EBAF_Edition4.2 is the Clouds and the Earth's Radiant Energy System (CERES) Energy Balanced and Filled (EBAF) Top-of-Atmosphere (TOA) and surface monthly means data in netCDF format Edition 4.2 data product. Data was collected using the CERES Scanner instruments on the Terra, Aqua, and NOAA-20 platforms for various periods. Data collection for this product is ongoing.CERES_EBAF_Edition4.2 data are monthly and climatological averages of TOA clear-sky (spatially complete) fluxes and all-sky fluxes, where the TOA net flux is constrained to the ocean heat storage. It also provides computed monthly mean surface radiative fluxes consistent with the CERES EBAF-TOA product and some basic cloud properties derived from colocated imagers. Cloud Radiative Effects are provided at both the TOA and surface as determined using a cloud-free profile in the Fu-Liou Radiative Transfer Model (RTM). Observed fluxes are obtained using cloud properties derived from narrow-band imagers onboard both EOS Terra and Aqua satellites and NOAA-20, as well as geostationary satellites, to fully model the diurnal cycle of clouds. The computations are also based on meteorological assimilation data from the Goddard Earth Observing System (GEOS) Versions 5.4.1 models. Unlike other CERES Level 3 clear-sky regional data sets that contain clear-sky data gaps, the clear-sky fluxes in the EBAF-TOA product are regionally complete. The EBAF-TOA product is the CERES project's best estimate of the fluxes based on all available satellite platforms and input data. CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Regionally Averaged Computed TOA, within the Atmosphere, and Surface Fluxes Hourly Aqua Edition4A
CER_CRS1deg-Hour_Aqua-MODIS_Edition4A is the Aqua Clouds and the Earth's Radiant Energy System (CERES) Level 3 computed flux Edition4A data product. The Cloud and Radiative Swath One Degree (CRS1deg) Hour provides data hourly on a 1-degree latitude and longitude global grid from the Aqua CERES Flight Model 3 (FM3) or FM4 CER_CRS_Aqua-FM3-MODIS_Edition4A instantaneous footprint data. The data provides instantaneous averages of computed top of atmosphere (ToA) (0.01-hPa), within the atmosphere (850-, 500-, 200-, and 70-hPa), and surface fluxes (Wm-2). Four assumptions are used in the Fu-Liou radiative transfer model (RTM): Total-sky, clear-sky (no clouds, but aerosol), pristine (no clouds or aerosols), and total-sky, no aerosol as described in Scott 2022. Variables from these footprints are then assigned to a grid box and linearly averaged.The data has been processed from January 1, 2018, to December 31, 2022, and is available in daily netCDF4 files. This single satellite product uses the primary CERES instrument in cross-track mode. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels: total, shortwave, and window. Longwave fluxes are obtained by subtracting shortwave from the total. A few variables from the SSF have been included in this product, such as observed CERES shortwave and longwave ToA fluxes and cloud fraction. MODIS measurements are not directly used in this dataset. The MODIS data is used during SSF processing to obtain cloud properties. These cloud properties are then used to compute the CRS fluxes.Still, this product should be used in conjunction with the CER_SSF1deg-Hour_Aqua-MODIS_Edition4A product, which has additional cloud and aerosol properties. The CER_SYN1deg-1Hour_Terra-Aqua-MODIS_Edition4A is another related product that averages the cloud properties to the one-degree grid before performing the Fu-Liou RTM calculations. The SYN1deg-1Hour product also brings in cloud properties derived from geostationary imagers between 60 N and 60 S to provide information to provide a complete diurnal cycle.
CERES ERBE-like Time-Interpolated TOA Fluxes Terra and Aqua Crosstrack Edition4
CER_ES4_Terra+Aqua_Edition4 is the Clouds and the Earth's Radiant Energy System (CERES) Earth Radiation Budget Experiment (ERBE)-like Time-Interpolated Top-of-the-Atmosphere (TOA) Fluxes Terra and Aqua Cross-track Edition4 data product. Data for this product is collected by Flight Model 1 (FM1) and FM2 on Terra and FM3 and FM4 on Aqua. Data collection for this product is ongoing.The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time-averaged CERES data for both the Terra and Aqua satellites using measurements from the primary cross-track instrument on each platform. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave (SW) and longwave (LW) fluxes at the TOA from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is "like" the algorithm used for ERBE.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions are a follow-on to the successful ERBE mission. The first CERES instrument, the proto flight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit onboard the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched onboard Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched onboard the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched onboard the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Energy Balanced and Filled (EBAF) TOA and Surface Monthly means data in netCDF Edition 4.1
CERES_EBAF_Edition4.1 is the Clouds and the Earth's Radiant Energy System (CERES) Energy Balanced and Filled (EBAF) Top-of-Atmosphere (TOA) and surface monthly means data in netCDF format Edition 4.1 data product. Data was collected using the CERES Scanner instruments on both the Terra and Aqua platforms. Data collection for this product is ongoing.CERES_EBAF_Edition4.1 data are monthly and climatological averages of TOA clear-sky (spatially complete) fluxes and all-sky fluxes, where the TOA net flux is constrained to the ocean heat storage. It also provides computed monthly mean surface radiative fluxes consistent with the CERES EBAF-TOA product and some basic cloud properties derived from MODIS. Cloud Radiative Effects are provided at both the TOA and surface as determined using a cloud-free profile in the Fu-Liou Radiative Transfer Model (RTM). Observed fluxes are obtained using cloud properties derived from narrow-band imagers onboard both EOS Terra and Aqua satellites, as well as geostationary satellites, to fully model the diurnal cycle of clouds. The computations are also based on meteorological assimilation data from the Goddard Earth Observing System (GEOS) Versions 5.4.1 models. Unlike other CERES Level 3 clear-sky regional data sets that contain clear-sky data gaps, the clear-sky fluxes in the EBAF-TOA product are regionally complete. The EBAF-TOA product is the CERES project's best estimate of the fluxes based on all available satellite platforms and input data. CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the proto flight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES ERBE-like Time-Interpolated TOA Fluxes Aqua Crosstrack Edition4
CER_ES4_Aqua-Xtrk_Edition4 is the Clouds and the Earth's Radiant Energy System (CERES) Earth Radiation Budget Experiment (ERBE)-like Time-Interpolated Top-of-the-Atmosphere (TOA) Fluxes Aqua Crosstrack Edition4 data product, which was collected using the CERES-FM3 and CERES-FM4 instruments on the Aqua platform. Data collection for this product is complete.The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged CERES data for a single satellite using measurements from the primary crosstrack instrument. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the TOA from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is "like" the algorithm used for ERBE.CERES is a key component of the Earth Observing System (EOS) program. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions are a follow-on to the successful ERBE mission. The first CERES instrument, protoflight model (PFM), was launched on November 27, 1997 as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols 1-Hourly Terra-NOAA20 Edition4A
CER_SYN1deg-1Hour_Terra-NOAA20-MODIS_Edition4A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO) Top-of-Atmosphere (TOA) Within-Atmosphere and Surface Fluxes, Clouds, and Aerosols 1-Hourly Terra-Aqua Edition4A data product. Data was collected using several instruments on multiple platforms, including CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM6, and VIIRS on NOAA-20. Data collection for this product is ongoing.The CERES Synoptic (SYN) 1 degree (SYN1deg) products provide CERES-observed temporally interpolated top-of-atmosphere (TOA) radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a one-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.The CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrow-band to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES SSF 1 degree Regionally Averaged TOA Fluxes, Clouds and Aerosols Hourly NPP VIIRS Edition2A
CER_SSF1deg-Hour_NPP-VIIRS_Edition2A is the Clouds and the Earth's Radiant Energy System (CERES) Single Scanner Footprint One Degree (SSF1deg) Regionally Averaged Top of Atmosphere (TOA) Fluxes, Clouds and Aerosols Hourly Suomi National Polar-orbiting Partnership (NPP) Visible-Infrared Imager-Radiometer Suite (VIIRS) Edition 2A data product, which was collected using the CERES-Flight Model 5 (FM5) and VIIRS instruments on the Suomi NPP platform. Data collection for this product is in progress.The CERES SSF1deg Hour product provides regional averages of CERES TOA fluxes, clouds derived from a co-located imager, and aerosols on a 1-degree latitude and longitude grid. This single satellite product uses the primary CERES instrument in cross-track mode. TOA fluxes are provided for clear-sky and all-sky conditions for longwave (LW), shortwave (SW), and window (WN) wavelength bands. The incoming daily solar irradiance is from the Solar Radiation and Climate Experiment (SORCE) and Total Solar Irradiance (TSI). The cloud properties are averaged for day and night (24-hour) and day-only periods. Cloud properties are stratified into four atmospheric layers (surface-700 hPa, 700 hPa, - 500 hPa, 500 hPa, - 300 hPa, 300 hPa, - 100 hPa) and a total of all layers. The aerosols are averaged instantaneous values from the co-located imager.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi NPP satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
CERES Time-Interpolated TOA Fluxes, Clouds and Aerosols Monthly NOAA-20 Edition1C
CER_SSF1deg-Month_NOAA20-VIIRS_Edition1C is the NOAA-20 Clouds and the Earth's Radiant Energy System (CERES) Level 3 Single Scanner Footprint (SSF) Edition1C Top of Atmosphere (ToA) flux data product. The SSF One Degree (SSF1deg) Month provides monthly averages on a 1-degree latitude and longitude global grid from the NOAA-20 CERES Flight Model 6 (FM6) data. The last CERES instrument, FM-6, was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now known as NOAA-20, on November 18, 2017. The data product begins May 1, 2018. The product is distributed in monthly Hierarchical Data Format (HDF) 4 files. The file contains the monthly mean and provides global coverage.The SSF1deg-Month granule contains the monthly averages of regional CERES FM6 Earth viewing Top of Atmosphere (ToA) shortwave and longwave fluxes. The fluxes are converted from the unfiltered CERES radiances at the footprint level using the co-located Visible Infrared Imaging Radiometer Suite (VIIRS) imager-defined scene. The footprint fluxes are gridded at hourly periods and then temporally interpolated assuming constant meteorology between measurements. The ToA fluxes are provided for both clear-sky and total sky conditions. The incoming daily solar irradiance is from the Solar Radiation and Climate Experiment (SORCE) and Total Solar Irradiance (TSI). The VIIRS radiances are used with CERES-specific cloud mask and cloud property retrievals and are stratified into four atmospheric layers: surface to 700 mb, 700 mb to 500 mb, 500 to 300 mb, and above 300 mb along with the total. Each cloud layer has properties such as amount, height, temperature, pressure, optical depth, emissivity, phase, water path, and water particle size. The cloud properties are averaged for day and night (24-hour) and day-only periods.This product uses the instantaneous gridded product, CER_SSF1deg-Hour_NOAA20-VIIRS_Edition1C, as input.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.