Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
71
datasets available to search
ShareScore release 0.9.0
Dataset results
71 results for “sulphur”
Crystal structure of the LRR ectodomain from the plant immune receptor kinase SOBIR1 from Arabidopsis thaliana - sulphur SAD datasets
<p>This dataset includes the raw X-ray diffraction images collected on 06.11.2017 at beam line PXIII of the Swiss Light Source (SLS) Villigen, Switzerland. Native (dts_xxx, λ=1.033201 Å, 1 360° wedge at 0.1° oscillation) and redundant sulphur single-wavelength anomalous dispersion (SAD) data (ssad_xxx, λ= 2.078524 Å, 3 360° wedges at 0.1° oscillation) were collected to 1.75 Å and 3.12 Å resolution. The dataset includes a .bz2 archive of the XDS processing for native and sulphur SAD data, data were scaled together in xscale, the resulting xscale.hkl and nat1.hkl contain the integrated intensities and crystallographic structure factors. The corresponding coordinates have been deposited with the Protein Data Bank (http://rcsb.org) with ID 6R1H.</p>
8% Sulphur-Aloe Vera Soap as an Adjuvant Treatment for Pityriasis Versicolor
ClinicalTrials.gov study NCT06170333. IPD Sharing: Not stated. Countries: 1. Publications: 0.
IscR of Rhodobacter sphaeroides functions as repressor of genes for iron-sulphur metabolism and represents a new type of iron-sulphur binding protein
GEO Series GSE65537. Cereibacter sphaeroides 2.4.1. 2 samples. Type: Expression profiling by array.
Sentinel-5P TROPOMI Near-Real-Time (NRT) Sulphur Dioxide SO2 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__SO2____HiR_NRT) at GES DISC
The Sentinel-5P TROPOMI Near Real Time (NRT) Sulphur Dioxide SO2 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__SO2____HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__SO2____HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__SO2____HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The retrieval algorithm for Sentinel-5P TROPOMI SO2 from ultraviolet spectral measurements is the Differential Optical Absorption Spectroscopy (DOAS) method. The relevant information of absorption cross section, instrument characteristics, cloud cover, and geolocation are utilized to derive SO2 slant column density (SCD). A sensitive spectral window of 312 to 326 nm is set as the baseline for the slant column fit with another two spectral windows (325 to 335 nm, 360 to 390 nm) to account for the non-linear effects in those high column amount cases. The SCD is then corrected with the empirical offsets to the systematic biases. The air mass factor (AMF) Look-up table has been created with the LIDORT radiative transfer model. The outputs of the DOAS algorithm are SO2 vertical column density (VCD), SCD, AMF, the DOAS-type averaging kernels (AK), and error estimates. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~100 MB.
Sentinel-5P TROPOMI Sulphur Dioxide SO2 1-Orbit L2 7km x 3.5km V1 (S5P_L2__SO2___) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. Starting from July 13th in 2020, five Sentinel-5P TROPOMI level-2 products including total and tropospheric column ozone, sulfur dioxide, CLOUD, and formaldehyde have been generated in processor version 2. For data before August 6th of 2019, please check S5P_L2__SO2____1 data collection. For data between August 6th of 2019 and July 13th of 2020, please check S5P_L2__SO2____HiR_1 data collection. For data after July 13th of 2020, please check S5P_L2__SO2____HiR_2 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The retrieval algorithm for Sentinel-5P TROPOMI SO2 from ultraviolet spectral measurements is the Differential Optical Absorption Spectroscopy (DOAS) method. The relevant information of absorption cross section, instrument characteristics, cloud cover, and geolocation are utilized to derive SO2 slant column density (SCD). A sensitive spectral window of 312 to 326 nm is set as the baseline for the slant column fit with another two spectral windows (325 to 335 nm, 360 to 390 nm) to account for the non-linear effects in those high column amount cases. The SCD is then corrected with the empirical offsets to the systematic biases. The air mass factor (AMF) Look-up table has been created with the LIDORT radiative transfer model. The outputs of the DOAS algorithm are SO2 vertical column density (VCD), SCD, AMF, the DOAS-type averaging kernels (AK), and error estimates.
OMI/Aura Level 2 Sulphur Dioxide (SO2) Trace Gas Column Data 1-Orbit Subset and Collocated Swath along CloudSat V003 (OMSO2_CPR) at GES DISC
This is a CloudSat-collocated subset of the original product OMSO2, for the purposes of the A-Train mission. The goal of the subset is to select and return OMI data that are within +/-100 km across the CloudSat track. The resultant OMI subset swath is sought to be about 200 km cross-track of CloudSat. Even though collocated with CloudSat, this subset can serve many other A-Train applications. (The shortname for this CloudSat-collocated subset of the original product OMSO2 Product is OMSO2_CPR_V003) This document describes the original OMI SO2 product (OMSO2) produced from global mode UV measurements of the Ozone Monitoring Instrument (OMI). OMI was launched on July 15, 2004 on the EOS Aura satellite, which is in a sun-synchronous ascending polar orbit with 1:45pm local equator crossing time. The data collection started on August 17, 2004 (orbit 482) and continues to this day with only minor data gaps. The minimum SO2 mass detectable by OMI is about two orders of magnitude smaller than the detection threshold of the legacy Total Ozone Mapping Spectrometer (TOMS) SO2 data (1978-2005) [Krueger et al 1995]. This is due to smaller OMI footprint and the use of wavelengths better optimized for separating O3 from SO2. The product file, called a data granule, covers the sunlit portion of the orbit with an approximately 2600 km wide swath containing 60 pixels per viewing line. During normal operations, 14 or 15 granules are produced daily, providing fully contiguous coverage of the globe. Currently, OMSO2 products are not produced when OMI goes into the "zoom mode" for one day every 452 orbits (~32 days). For each OMI pixel we provide 4 different estimates of the column density of SO2 in Dobson Units (1DU=2.69x10^16 molecules/cm2) obtained by making different assumptions about the vertical distribution of the SO2. However, it is important to note that in most cases the precise vertical distribution of SO2 is unimportant. The users can use either the SO2 plume height, or the center of mass altitude (CMA) derived from SO2 vertical distribution, to interpolate between the 4 values: 1)Planetary Boundary Layer (PBL) SO2 column (ColumnAmountSO2_PBL), corresponding to CMA of 0.9 km. 2)Lower tropospheric SO2 column (ColumnAmountSO2_TRL), corresponding to CMA of 2.5 km. 3)Middle tropospheric SO2 column, (ColumnAmountSO2_TRM), usually produced by volcanic degassing, corresponding to CMA of 7.5 km, 4)Upper tropospheric and Stratospheric SO2 column (ColumnAmountSO2_STL), usually produced by explosive volcanic eruption, corresponding to CMA of 17 km. The accuracy and precision of the derived SO2 columns vary significantly with the SO2 CMA and column amount, observational geometry, and slant column ozone. OMI becomes more sensitive to SO2 above clouds and snow/ice, and less sensitive to SO2 below clouds. Preliminary error estimates are discussed below (see Data Quality Assessment). OMSO2 files are stored in EOS Hierarchical Data Format (HDF-EOS5). Each file contains data from the day lit portion of an orbit (53 minutes). There are approximately 14 orbits per day. The maximum file size for the OMSO2 data product is about 9 Mbytes.
The Msn2/4-like gene transcription factor Com2 (ORF YER130) is a key player of S. cerevisiae response and tolerance to sulphur dioxide
GEO Series GSE117883. Schizosaccharomyces pombe; Saccharomyces cerevisiae. 12 samples. Type: Expression profiling by array.
Predictive models for the phase behaviour and solution properties of weak electrolytes: nitric, sulphuric and nitric acids
<p>All computational data for figures presented in the publication. </p>
Fig. 2 in Specialized androconial scales conceal species-specific semiochemicals of sympatric sulphur butterflies (Lepidoptera: Pieridae: Coliadinae)
Fig. 2 SEM photographs of wing scales of the Colias-clade butterflies of northeastern Brazil. The androconial scales are on the upper portion of the images and the ordinary scales, on the lower portion. At × 500 magnification: (a) Anteos clorinde, (b) A. menippe, (c) Phoebis marcellina; at × 200 magnification: (d) P. argante, (e) P. philea, (f)
OMI/Aura Sulphur Dioxide (SO2) Total Column 1-orbit L2 Swath 13x24 km V003 NRT
The Ozone Monitoring Instrument (OMI) was launched aboard the EOS-Aura satellite on July 15, 2004 (1:38 pm equator crossing time, ascending mode). OMI with its 2600 km viewing swath width provides almost daily global coverage. OMI is a contribution of the Netherlands Space Office (NSO) in collaboration with Finish Meterological Institute (FMI), to the US EOS-Aura Mission. The principal investigator (Dr. Pieternel Levelt) institute is the KNMI (Royal Netherlands Meteorological Institute). OMI is designed to monitor stratospheric and tropospheric ozone, clouds, aerosols and smoke from biomass burning, SO2 from volcanic eruptions, and key tropospheric pollutants (HCHO,NO2) and ozone depleting gases (OClO and BrO). OMI sensor counts, calibrated and geolocated radiances, and all derived geophysical atmospheric products will be archived at the NASA Goddard DAAC. The Sulfer Dioxide Product 'OMSO2' from the Aura-OMI is now publicly available from NASA GSFC Earth Sciences (GES) Data and Information Services Center (DISC) for public access. OMSO2 product contains three values of SO2 Vertical column corresponding to three a-priori vertical profiles used in the retrieval algorithm. It also contains quality flags, geolocation and other ancillary information. The shortname for this Level-2 OMI total column SO2 product is OMSO2 and the algorithm leads for this product are NASA/UMBC OMI scientists Drs. Nikolay Krotkov (nickolay.a.krotkov@nasa.gov),Kai Yang(kai.yang@nasa.gov) and Arlin J. Krueger(krueger@umbc.edu). OMSO2 files are stored in EOS Hierarchical Data Format (HDF-EOS5). Each file contains data from the day lit portion of an orbit (~53 minutes). There are approximately 14 orbits per day. The maximum file size for the OMSO2 data product is about 21 Mbytes. On-line spatial and parameter subset options are available during data download A list of tools for browsing and extracting data from these files can be found at: http://disc.gsfc.nasa.gov/Aura/tools.shtml A short OMSO2 Readme Document that includes brief algorithm description and documents that provides known data quality related issues are available from the UMBC OMI site ( http://so2.gsfc.nasa.gov/docs.php ) For more information on Ozone Monitoring Instrument and atmospheric data products, please visit the OMI-Aura sites: http://aura.gsfc.nasa.gov/ http://so2.gsfc.nasa.gov/ http://www.knmi.nl/omi/research/documents/. For the full set of Aura products and other atmospheric composition data available from the GES DISC, please see the links below. http://disc.sci.gsfc.nasa.gov/Aura/ http://disc.gsfc.nasa.gov/acdisc/
Sentinel-5P TROPOMI Sulphur Dioxide SO2 1-Orbit L2 5.5km x 3.5km V1 (S5P_L2__SO2____HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.Starting from July 13th in 2020, five Sentinel-5P TROPOMI level-2 products including total and tropospheric column ozone, sulfur dioxide, CLOUD, and formaldehyde have been generated in processor version 2.For data before August 6th of 2019, please check S5P_L2__SO2____1 data collection.For data between August 6th of 2019 and July 13th of 2020, please check S5P_L2__SO2____HiR_1 data collection.For data after July 13th of 2020, please check S5P_L2__SO2____HiR_2 data collection.The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions.The retrieval algorithm for Sentinel-5P TROPOMI SO2 from ultraviolet spectral measurements is the Differential Optical Absorption Spectroscopy (DOAS) method. The relevant information of absorption cross section, instrument characteristics, cloud cover, and geolocation are utilized to derive SO2 slant column density (SCD). A sensitive spectral window of 312 to 326 nm is set as the baseline for the slant column fit with another two spectral windows (325 to 335 nm, 360 to 390 nm) to account for the non-linear effects in those high column amount cases. The SCD is then corrected with the empirical offsets to the systematic biases. The air mass factor (AMF) Look-up table has been created with the LIDORT radiative transfer model. The outputs of the DOAS algorithm are SO2 vertical column density (VCD), SCD, AMF, the DOAS-type averaging kernels (AK), and error estimates.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.