Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,592
datasets available to search
ShareScore release 0.9.0
Dataset results
3,592 results for “Grid”
profiles of chlorophyll and photosynthetically available radiation (PAR) from Bio-Argo float measurements for 2013-2020 interpolated on regular 2 m grid for the World Ocean
<p>The dataset includes profiles of chlorophyll and photosynthetically available radiation (PAR) from Bio-Argo float measurements for 2013-2020 interpolated on regular 2 m grid for the World Ocean </p> <p>Data was collected from open archive (<em>Argo float data and metadata from Global Data Assembly Centre (Argo GDAC)) </em><a href="https://doi.org/10.17882/42182">https://doi.org/10.17882/42182</a></p> <p>Global array of Bio-Argo floats equipped with Chl (mg m−3) and PAR(μmol photons m-2 s-1) sensors at -60°S..60°N was used in this study. Data for 2013-2020 was downloaded from the IFREMER data archive (ftp://ftp.ifremer.fr/, <a href="https://doi.org/10.17882/42182">https://doi.org/10.17882/42182</a>). It includes 464 floats measuring Chl (~ 70000 profiles), and 167 floats measuring both PAR (~26000 profiles) and Chl. Before the analysis, the measurements of each Bio-Argo buoy were visually checked to filter the outliers in Chl or PAR data. After visual analysis about 1600 profiles of PAR and 2800 profiles of Chl were excluded from the dataset.</p> <p>Chl (mg m−3) was retrieved from a Chl fluorometer (excitation at 470 nm; emission at 695 nm) sensors of three types (FLBB, ECO-Triplet, or MCOMS). We use the raw fluorescence-based estimates of Chl (product “non-adjusted Chl”) derived directly from the measurements of fluorescence with factory calibration coefficients without the corrections on non-photochemical quenching, CDOM fluorescence, and other effects (see (<a href="http://www.argodatamgt.org/Documentation">http://www.argodatamgt.org/Documentation</a>)).</p> <p>A multispectral ocean color radiometer (OCR-504, SATLANTIC Inc.) was used to measure PAR. Only instantaneous PAR measurements made within ± 1.5 hours from noon (10:30-13:30 hours) were used.</p> <p>Then the data from all buoys were interpolated on regular 2-m grid and included in one dataset.</p>
Daily 1-km gap-free PM2.5 grids in China, v1 (2000–2020)
<p>A Long-term Gap-free High-resolution Air Pollutants concentration dataset (abbreviated as LGHAP) is of great significance for environmental management and earth system science analysis. In the current release of LGHAP aerosol dataset (LGHAP.v1), we provide a 21-year-long (2000–2020) gap free PM2.5 concentration product with daily 1-km resolution covering the land area of China. The dataset was generated from the daily gap free AOD (https://doi.org/10.5281/zenodo.5652257) that was derived through an integration of a set of data tensors of AOD and other related datasets such as air pollutants concentration and atmospheric visibility acquired from diversified sensors or platforms via a machine learned regression model. The dataset was provided in the NetCDF format, while data in each individual year were archived in a zip file. Python, Matlab, R, and IDL codes were also provided to help users read and visualize the LGHAP data.</p>
Daily 1-km gap-free PM10 grids in China, v1 (2000–2020)
<p>A Long-term Gap-free High-resolution Air Pollutants concentration dataset (abbreviated as LGHAP) is of great significance for environmental management and earth system science analysis. In the current release of LGHAP aerosol dataset (LGHAP.v1), we provide a 21-year-long (2000–2020) gap free PM10 concentration product with daily 1-km resolution covering the land area of China. The dataset was generated from the daily gap free AOD (https://doi.org/10.5281/zenodo.5652257) that was derived through an integration of a set of data tensors of AOD and other related datasets such as air pollutants concentration and atmospheric visibility acquired from diversified sensors or platforms via a machine learned regression model. The dataset was provided in the NetCDF format, while data in each individual year were archived in a zip file. Python, Matlab, R, and IDL codes were also provided to help users read and visualize the LGHAP data.</p>
Daily 1-km gap-free AOD grids in China, v1 (2000–2020)
<p>A Long-term Gap-free High-resolution Air Pollutants concentration dataset (abbreviated as LGHAP) is of great significance for environmental management and earth system science analysis. In the current release of LGHAP aerosol dataset (LGHAP.v1), we provide a 21-year-long (2000–2020) gap free AOD product with daily 1-km resolution covering the land area of China. The dataset was generated via a seamless integration of the tensor flow based multimodal data fusion with ensemble learning based knowledge transfer in statistical data mining. The proposed method transformed a set of data tensors of AOD and other related datasets such as air pollutants concentration and atmospheric visibility that were acquired from diversified sensors or platforms via integrative efforts of spatial pattern recognition for high dimensional gridded data analysis toward data fusion and multiresolution image analysis. The daily gap free AOD was provided in the NetCDF format, while data in each individual year were archived in a zip file. Python, Matlab, R, and IDL codes were also provided to help users read and visualize the LGHAP data.</p>
Annual mean 1-km gap-free AOD, PM2.5, and PM10 grids in China, v1 (2000–2020)
<p>A Long-term Gap-free High-resolution Air Pollutants concentration dataset (abbreviated as LGHAP) is of great significance for environmental management and earth system science analysis. In the current release of LGHAP aerosol dataset (LGHAP.v1), we provide 21-year-long (2000–2020) gap free annual mean AOD, PM2.5 and PM10 concentration data with a 1-km resolution covering the land area of China. The dataset was generated from the daily gap free AOD (https://doi.org/10.5281/zenodo.5652257) that was derived through an integration of a set of data tensors of AOD and other related datasets such as air pollutants concentration and atmospheric visibility acquired from diversified sensors or platforms via a machine learned regression model. The dataset was provided in the NetCDF format, while data in each individual year were archived in a zip file. Python, Matlab, R, and IDL codes were also provided to help users read and visualize the LGHAP data.</p>
Observation based gridded annual runoff estimates over Victoria, Australia
<p>The dataset provides observation-based interpolated gridded annual runoff estimates over Victoria, Australia during 1982 - 2012. The methodology extended the R package <em>rtop</em> to allow <em>top-kriging</em> with external drift by employing spatial variability of gridded rainfall estimates. This dataset can be useful to estimate runoff at ungauged or poorly gauged catchments in Victoria. The full paper with the methodology is available at https://mssanz.org.au/modsim2021/papers/K11/weligamage.pdf</p> <p> </p>
Spatially gridded cross-shelf hydrographic sections and monthly climatologies from shipboard survey data collected along the Newport Hydrographic Line, 1997-2021
<p>This data set, described in detail in <a href="https://www.sciencedirect.com/science/article/pii/S2352340922001342">Risien et al. (2022)</a>, contains Newport Hydrographic Line station data; gridded, cross-shelf hydrographic sections; and derived monthly climatologies for temperature, practical salinity, potential density, spiciness, and dissolved oxygen. It consists of CSV (Comma Separated Values) files (<em>newport_hydrographic_line_station_data</em><em>.</em><em>zip</em>) that contain CTD observations collected at the seven hydrographic stations located 1, 3, 5, 10, 15, 20 and 25 nautical miles west of Newport, Oregon between March 1997 and July 2021. Additionally, the data set contains three NetCDF files that follow CF (Climate and Forecast) metadata conventions: <em>newport_hydrographic_line_gridded_sections</em><em>.nc</em> contains observations gridded to a 0.01<sup>o</sup> x 1 dbar longitude - pressure grid to create cross-shelf hydrographic sections for each of the five variables for each cruise. <em>newport_hydrographic_line_gridded_section_climatologies</em><em>.nc</em> contains climatological hydrographic sections, calculated using harmonic analysis over the 24-year period March 1997 to February 2021 and reported here for the middle of each month, and <em>newport_hydrographic_line_gridded_section_coefficients.nc</em> contains the associated linear regression model coefficients for all five variables. From the regression coefficients, users can construct seasonal cycles at any location in the gridded section with a temporal resolution that best suits their specific needs. Finally, this data set includes example MATLAB and R scripts that show how to read the data files, plot cross-shelf hydrographic sections, and calculate daily and monthly climatologies using the regression coefficients.</p>
Dataset for CoordiNet D6.2 - Chapter 4 - Evaluation of Combinations of Coordination Schemes and Products for Grid Services
<p>This is a supporting material for chapter 4 of CoordiNet D6.2. The deliverable is available at:</p> <p><a href="https://coordinet-project.eu/publications/deliverables">CoordiNet deliverables (coordinet-project.eu)</a></p> <p>The dataset is composed by an interconnected system consisting of the IEEE 14-bus (TN) transmission network connected to three distribution networks: the Matpower systems 18-bus (DN_18), 69-bus (DN_69), and 141-bus (DN_141). All systems topology and some parameters are based on the corresponding cases in Matpower [1]. Base demand is adapted from the case, while base generation profiles are added to all nodes. All distribution systems are balanced, and the transmission system is imbalanced. Thermal limits of the lines are adapted in order to create congestion in the systems. Each distribution system is connected to the transmission system through one line, which has capacity of 1.0. The interconnected system is fully represented in "Network.xlsx", in which:</p> <ul> <li>System: transmission (TN) or distribution (DN_18, DN_69, DN_141);</li> <li>LineID: ID of the lines;</li> <li>BusNumber: number of the nodes within the systems. This parameter is used to define the lines (from/to);</li> <li>BaseDemand and BaseSupply: base active demand and generation of each node;</li> <li>ConnectedDN: distribution system to which the transmission system node is connected to. If blank, the node is not connected to any distribution system. Only for the transmission system;</li> <li>InterfaceCapacity: thermal limit of the interface between the transmission and distribution systems;</li> <li>ThermalLimit: thermal limit of the transmission/distribution systems lines. For distribution systems, a value of 10 indicates that the line has no limit; </li> <li>SFTN: shift factor matrix of the transmission system. Capture the change in the active power flow over a line due to a change in injection or offtake at a node;</li> <li>BaseReactiveDemand and BaseReactiveSupply: base reactive demand and generation at each node. Only for distribution systems;</li> <li>VoltageLB and VoltageUB: lower and upper limits for the magnitude squared of the voltage in each distribution system node. Only for distribution systems;</li> <li>ConnectedTN: identify if the distribution node is connected or not to the transmission system. Only for distribution systems;</li> <li>ResistanceR: resistence of the distribution system lines. Only for distribution systems;</li> <li>ReactanceX: reactance of the distribution system lines. Only for distribution systems.</li> </ul> <p>Flexibility bids are randomly generated in the different nodes. For downward flexibility bids, the prices are drawn from the uniform distribution in the range 10 to 15, and for upward flexibility bids, they are drawn from the range 50 to 55. The bids maximum quantities are generated according to the base demand or supply of the node from which they are connected. The generated orderbook is presented in "OrderbookTN" (transmission system) and "OrderbookDN" (distribution systems):</p> <ul> <li>OrderID: the ID of the order, to make each order unique;</li> <li>System: the system (TN, DN_18, DN_69, DN_141) from which the order is offered;</li> <li>BusNumber: the node from which the order is offered;</li> <li>FlexibilitySense: UPWARD for increase in generation or decrease in demand; DOWNWARD for increase in demand or decrease in generation;</li> <li>Price: the submitted order price;</li> <li>Quantity: the maximum quantities of the order.</li> </ul> <p>In addition, table check_system contains the forecasted flows over lines before flexibility activation. For the transmission system, the SFTN is used and only active power is calculated. For the distribution systems, a linearized model of the power flow is used, thus active and reactive power are calculated:</p> <ul> <li>System: the system (TN, DN_18, DN_69, DN_141) where the line is located;</li> <li>From/to: bus numbers of the connection;</li> <li>Flow: forecasted active flow over transmission system lines;</li> <li>Flow P/Flow Q: forecasted active/reactive flow over distribution system lines (also for interface flows TN-DN);</li> <li>Congestion: if congestion is forecasted over the line.</li> </ul> <p>Source of the systems' topology:</p> <p>[1] R. D. Zimmerman, C. E. Murillo-Sanchez, and R. J. Thomas, “Mat-power: Steady-state operations, planning, and analysis tools for power systems research and education,” IEEE Transactions on power systems, vol. 26, no. 1, pp. 12–19, 2010.</p> <p>Please notice that this dataset does not replace the information provided by Matpower related to the aforementioned systems. It rather uses those systems topology and some of their parameters to build a case study to investigate TSO-DSO coordination market models for the procurement of flexibility. For the full description of these systems, please visit: <a href="https://matpower.org/">MATPOWER – Free, open-source tools for electric power system simulation and optimization</a>.</p>
Globally-gridded data for manuscript: Global stocks and capacity of mineral-associated soil organic carbon
<p>Supporting globally-gridded data products for manuscript: Georgiou K., Jackson R. B., Vindušková O., Abramoff R. Z., Ahlström A., Feng W., Harden J. W., Pellegrini A. F. A., Polley H. W., Soong J. L., Riley W. J., Torn M. S. Global stocks and capacity of mineral-associated soil organic carbon. <em>Nature Communications</em>, 2022.</p> <p>We leveraged data from a global synthesis of soil fractionation measurements (DOI: 10.5281/zenodo.5987415) along with ancillary data on climate, vegetation, and soil characteristics to produce spatially-explicit global estimates of mineral-associated soil organic carbon stocks (MOC) and mineralogical carbon capacity (MOC<sub>max</sub>) in non-permafrost, non-desert mineral soils. Globally-gridded datasets are given in kgC/m<sup>2</sup> for topsoil (0-30cm) and subsoil (30-100cm) at 0.5 degree by 0.5 degree spatial resolution.</p>
Coherent and non-coherent Eddy Kinetic Energy and gridded coherent eddy statistics
<p>This dataset includes the processed data used for the paper titled "Climatology, seasonality and trends of oceanic coherent eddies". The original data was obtained from AVISO+ SSH altimetry, Martínez-Moreno, J. <em>et.al (</em>2019)<em> </em>and Chelton, D. B., & Schlax, M. G. (2013).</p> <p> </p> <p>Further information and scripts to reproduce the result of the manuscript can be found at: https://github.com/josuemtzmo/CEKE_climatology</p>
Geografisches hexagonales Gitter mit 1 Quadratkilometer Zellengröße für Deutschland - Geographical hexagonal grid with one square kilometer cell size for Germany
<p>Ein räumliches Gitter stellt eine abstrakte Definition von einheitlich großen Bezugszellen für statistische Auswertungen dar. Dieses macht Auswertungen und Vergleiche gegenüber räumlichen Abgrenzungen auf der Basis von administrativen Grenzen wie Kreisen oder Gemeinden unterschiedlicher Größen einfacher. Geografische Gitterdefinitionen werden eingesetzt, um eine vordefinierte Raumbezugsstruktur zu haben mit einer einheitlicheren Verteilung von Zellen in der Fläche.</p> <p><br> Ein Gitter mit sechseckigen, eben hexagonalen Zellen bietet eine Alternative zu rechteckigen statistischen Gittern wie das GeoGitter vom Bundesamt für Kartographie und Geodäsie (BKG, 2020). Ein Hexagon-Gitter bietet neben der Eigenschaft homogene Einheiten für statistische Analysen zu bilden (Schindler et al. 2008) mit sechs unmittelbaren Nachbarzellen vorteilhaftere Voraussetzungen für Nachbarschaftsanalysen im Vergleich zu quadratischen Zellen mit vier Kantennachbarn (White et al. 1992). Als Beispiel werden im Bild 1 mittels Hexagonen-Gitter Volumenunterschiede der aufragenden Vegetation pro Zelle dargestellt.</p>
Stochastic Occupancy Grid Map Prediction in Dynamic Scenes: Dataset
<p>Three occupancy grid map (OGM) datasets for the paper titled "Stochastic Occupancy Grid Map Prediction in Dynamic Scenes" by Zhanteng Xie and Philip Dames</p> <p>1. OGM-Turtlebot2: collected by a simulated Turtlebot2 with a maximum speed of 0.8 m/s navigates around a lobby Gazebo environment with 34 moving pedestrians using random start points and goal points</p> <p>2. OGM-Jackal: extracted from two sub-datasets of the socially compliant navigation dataset (SCAND), which was collected by the Jackal robot with a maximum speed of 2.0 m/s at the outdoor environment of the UT Austin</p> <p>3. OGM-Spot: extracted from two sub-datasets of the socially compliant navigation dataset (SCAND), which was collected by the Spot robot with a maximum speed of 1.6 m/s at the Union Building of the UT Austin</p> <p>The relevant code is available at: <br> OGM prediction: https://github.com/TempleRAIL/SOGMP<br> OGM mapping with GPU: https://github.com/TempleRAIL/occupancy_grid_mapping_torch</p>
Data set for "Optical multiplexing of metrological time and frequency signals in a single 100 GHz-grid optical channel"
<p>Here we share the relevant data of the manuscript “Optical multiplexing of metrological time and frequency signals in a single 100 GHz-grid optical channel”.</p> <p>Files:</p> <ul> <li>Opt_Fr_stability_part1.txt</li> <li>Opt_Fr_stability_part2.txt</li> </ul> <p>contain the data used for evaluation of optical frequency transfer stability (Fig. 7 in the paper). The measurements were done with 8-channels K+K phase/frequency recorder. Column 1 contains date, col. 2: time, col. 5: in-loop beatnote phase, col. 6: out-of-loop beatnote phase. The phase is recorded in cycles. In case of out-of-loop beatnote it was divided by factor of two before recording, therefore the data from col. 6 should be multiplied by two to obtain true values of the optical phase fluctuations.</p> <p>File:</p> <ul> <li>RF_stability.txt</li> </ul> <p>contains the data used for evaluation of RF frequency transfer stability (Fig. 8 in the paper). Column 1 contains time in hours, and col. 2 RF phase fluctuations in seconds.</p>
Hexagonal grid in Flanders, Belgium
<p>As part of the annual partridge spring counts in Flanders, hunters are required to count partridges in all areas that have <a href="https://doi.org/10.5281/zenodo.5814833">suitable habitat</a> for partridges (<em>Perdix perdix</em>). Since it is assumed that visibility is around 200 meters, this hexagonal grid with a distance of 400 meters between parallel sides, helps volunteers in choosing observation points.</p>
VEL-Ar trajectory prediction model linear, co-seismic, and post-seismic grids for interpolation
<p>VEL-Ar trajectory prediction model linear, co-seismic, and post-seismic interpolation grids in ASCII format. The generation of these grids is described in http://doi.org/10.1007/s00190-015-0871-8</p>
Climate based seed zones for Mexico: spatial grids to guide reforestation under observed and projected climate change
<p>This database entry provides climate-based seed zone system for Mexico to address climate change observed over the last 30 years and projected climate change for the 2050s. The database corresponds to a journal publication by Castellanos-Acuña et al. (2018), available at https://doi.org/10.1007/s11056-017-9620-6. This seed zone classification is based on bands of two climate variables that have often been shown to drive genetic adaptation of tree species: mean coldest month temperature (MCMT), and an aridity index (AHM). MCMT was divided into ten bands of 3°C intervals, with the limits of these bands being, temperatures below <2°C, 2-5°, 5-8°, 8-11°, 11-14°, 14-17°, 17-20°, 20-23°, 23-26°, >26°C. AHM was divided into seven bands with intervals that are approximately equal width under a log-transformation: <20, 20-30, 30-45, 45-65, 65-95, 95-140, and >140 °C/mm. The gridded files provided in this database entry, the classes are coded as integer numbers, with the last digit representing the AHM class (1-7) and the first or first and second digit representing the MCMT class (1-10).</p>
Measurement data of a three-phase grid-side converter with a grid-forming synchronverter-based control method with current limitation
<p>The data set was recorded for a publication currently undergoing the submission process. The published data correspond to the data presented in the figures. The first column represents the time vector. All other columns are linked to the corresponding scenario by an identifier in the column name. The column name also contains the name of the recorded signal and the associated unit. The naming convention is <identifier_to_figure>_<recorded_signal>_<unit>.</p>
Temperature and wind speed time series on a 50 km^2 grid in Europe
<p>This spatio-temporal dataset contains weather timeseries for locations on a grid with 50km edge length in Europe. The data is resolved in one hour timesteps and comprises the years 2000-2018. It has been generated directly from the MERRA-2 reanalysis dataset.</p> <p>This data serves as an input to the Sector-Coupled Euro-Calliope model and has been generated to match the spatial resolution of the renewable energy generation capacity factors found at https://doi.org/10.5281/zenodo.3891480.</p> <p><em>temperature.nc:</em> air temperature at 2m above ground in degrees C.</p> <p><em>tsoil5.nc</em>: soil temperature at layer 5 in degrees C.</p> <p><em>wind10m.nc</em>: wind speed at 10m above ground in m/s.</p> <p><em>grid.nc:</em> provides the latitude and longitude of each grid (a.k.a. "site") centroid. This data is also given in every other dataset, but is provided here as a lightweight alternative to align other datasets to the same grid spacing.</p> <p> </p> <p><strong>Changelog</strong></p> <p>2024-06-07:</p> <ul> <li>Moved data variables to dataset attributes where the same data was duplicated per gridcell.</li> <li>Added units to file attributes.</li> <li>Updated `tsoil5` variable name from `soil_temperture_5` to `tsoil5`. Now all timeseries data variables have names that match the filename. </li> <li>Updated `tsoil5` variable from Kelvin to degrees C.</li> <li>Updated `tsoil5` variable empty data (when gridcell is not over land) from zero to NaN.</li> <li>Added `grid.nc`.</li> <li>Removed `electricity` variable from `wind10m.nc`, leaving only wind speed as the available timeseries data in the file.</li> </ul>
A grid-based spatial database of current and potential mires in Estonia (EstMire)
<p>The EstMire dataset <span>includes </span><span>11,394,461 points (</span>center points of a <span>25</span><span>×</span><span>25 m regular grid</span><span>)</span> <span>covering</span> the<span> <span>known (as of 2022) and potential mires in Estonia. It was compiled and modified from multiple data sources for running a spatial simulation model, SooSim. The database includes the areas mapped by the Estonian Fund for Nature (1997–2021), wetland polygons from Estonian Topographic Database (2023), and the completed mire restoration projects carried out by the State Forest Management Centre </span></span>(2013<span>–2022</span>). Added to these sources are the<span> remaining Histosols areas from Estonian soil map, which were screened for being either so far unmapped mires or potential areas (mostly drained forests) that could develop into mires once restored. </span>Natural open- or semi-open (wooded) mires, peatland forests and areas with the recovery potential was separated by assessing tree canopy height and density based on the Lidar data provided by Estonian Land Board, and by combining this with land use data to remove regenerating clear-cuts or otherwise human modified areas. Each current or potential mire point includes its coordinates and 10 variables describing its woody cover and restoration potential, mire site type, the surrounding ditch length, and (if recently subjected to ditch renovation or restoration) the year of those interventions. The dataset consists of two tables, the current mire points (“Estmire_current.csv”) and other peatland points (“Estmire_potential.csv”).</p>
Dataset for KIOS CoE Sandboxing use-case SUC5 corresponding to cyber attacks affecting the control of active distribution grids and microgrids
<p>These datasets <span> illustrate two primary scenarios (S1-S2) concerning the operation of the sandboxing use case SUC5 corresponding to cyber attacks affecting the control of active distribution grids and microgrids. These scenarios examine the functioning of an active distribution grid and microgrid system, along with the effects of certain cyber-attacks in this context. The demonstration of each scenario is detailed in selected time-series plots which were described in detail in Section </span><span>1.3 of the supporting document of SUC5 (</span><span>accompanied by an in-depth analysis of the processes and an impact assessment). A</span><span>ll data captured during the execution of each scenario was collected, including electrical measurements, reference and set-point signals. </span></p> <ul> <li><span><span><strong>SUC5/S1 datasets/<span>MITM with FDI</span> cyber-attack</strong><span><strong> in an active distribution grid (grid-connected)</strong>: This dataset is related to the operation of the fifth sandboxing use case (SUC5) of the KIOS CoE Sandboxing environment for cyber-physical analysis of EPES, which examines the operation of an active distribution grid, when the distribution grid is interconnected with the main grid. Specifically, this dataset corresponds to the first scenario (S1) of SUC5, where a MITM with FDI cyber-attack is virtually conducted within the sandboxing environment to introduce an offset deviation to the active power set-point allocated to BSS inverter controller from the secondary controller. More details about the scenario related to this dataset can be found in Section 1.3 of the supporting document. The dataset includes electrical measurements of the active power generated by the BSS inverter (connected at bus 2), and the active power set-point before and after the attack. The dataset is provided in the form of time-series measurements available as MATLAB (.mat) and CSV (.csv) files. The measurements were recorded from the real time simulator using the “OpWrite” block of the RT-LAB, with 1-millisecond time resolution. <br></span></span></span></li> <li><span><span><span><strong>SUC5/S2 datasets/MITM with FDI cyber-attack in a microgrid (islanding mode)</strong>: This dataset is related to the operation of the fifth sandboxing use case (SUC5) which investigates the operation of a microgrid during islanding mode. This dataset corresponds to the second scenario (S2) of SUC5, where a MITM with FDI cyber-attack is virtually conducted within the sandboxing environment to introduce an offset deviation to the frequency reference signal, exchanged between the higher-level controller (tertiary controller) and the microgrid local controller (secondary V-f controller). More details about the scenario related to this dataset can be found in Section 1.3 of this supporting document. The dataset includes electrical measurements of the microgrid frequency, the reference frequency value generated by the tertiary controller, as well as the attacked frequency reference value. The dataset is provided in the form of time-series measurements available as MATLAB (.mat) and CSV (.csv) files. The measurements were recorded from the real time simulator using the “OpWrite” block of the RT-LAB, with 1-millisecond time resolution. <br></span></span></span></li> </ul>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.