Find research datasets worth reusing

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program. Note that measurements from 10-Mar-2017 through 22-Jun-2017 had to be interpolated to create a monotonic time series due to a clock offset error made when deploying the data logger.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program. Note that measurements from 10-Mar-2017 through 26-Jun-2017 had to be interpolated to create a monotonic time series due to a clock offset error made when deploying the data logger.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program. Note that measurements from 10-Mar-2017 through 23-Jun-2017 had to be interpolated to create a monotonic time series due to a clock offset error made when deploying the data logger.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2017 through 31-Dec-2017

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 07-Oct-2017 through 31-Dec-2017. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

openCustomJan 2020View details →

Repeat photography of tidal fresh forest trees along the salinity gradient of the Altamaha River, GA

We established a transect of 42 stations for repeat photography of tidal fresh forest trees along the salinity gradient of the Altamaha River estuary. Target trees are located approximately every km on both the north and south banks, beginning at km 20 (with 0 at the mouth of the estuary) up to km 41, for a total of 21 km. We used a small boat to travel to each station and take digital photographs of target trees facing the river in Nov 2017, Feb, May, Aug of 2018. In Oct 2018 we extended the transect an additional 5 km downstream so that it now starts at km 16, with 5 more stations on the north bank and 5 on the south bank. All 52 stations were photographed in Oct 2018 and Oct 2019. These photos will be used to distinguish healthy, stressed and dead trees in each image and how they change over time.

Soil salinity at GCE-LTER vegetation monitoring plots in October 2016

Soil samples were collected in conjunction with Fall 2016 plant monitoring at half of the permanent vegetation monitoring plots in the creekbank and midmarsh zones at 10 GCE study sites. Pore-water salinity was determined by analysis of supernatant salinity in dried soil samples hydrated with a measured volume of deionized water.

Soil salinity at GCE-LTER vegetation monitoring plots in October 2017

Soil samples were collected in conjunction with Fall 2017 plant monitoring at half of the permanent vegetation monitoring plots in the creekbank and midmarsh zones at 10 GCE study sites. Pore-water salinity was determined by analysis of supernatant salinity in dried soil samples hydrated with a measured volume of deionized water.

Soil salinity at GCE-LTER vegetation monitoring plots in October 2018

Soil samples were collected in conjunction with Fall 2018 plant monitoring at half of the permanent vegetation monitoring plots in the creekbank and midmarsh zones at 10 GCE study sites. Pore-water salinity was determined by analysis of supernatant salinity in dried soil samples hydrated with a measured volume of deionized water.

Soil salinity at GCE-LTER vegetation monitoring plots in October 2019

Soil samples were collected in conjunction with Fall 2019 plant monitoring at half of the permanent vegetation monitoring plots in the creekbank and midmarsh zones at 10 GCE study sites. Pore-water salinity was determined by analysis of supernatant salinity in dried soil samples hydrated with a measured volume of deionized water.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE9_Hydro (Altamaha River near Rockdedundy Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.

Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 01-Jan-2018 through 31-Dec-2018

Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 01-Jan-2018 through 31-Dec-2018. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately semi-monthly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.