Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
739
datasets available to search
ShareScore release 0.9.0
Dataset results
739 results for “Prints”
Dataset for the publicaion "Cleaning strategies for 3D-printed porous scaffolds used for bone regeneration fabricated via ceramic vat photopolymerization"
<p>Dataset of publicaion "Cleaning strategies for 3D-printed porous scaffolds used for bone regeneration fabricated via ceramic vat photopolymerization".</p> <p><a title="Persistent link using digital object identifier" href="https://doi.org/10.1016/j.ceramint.2024.10.160" target="_blank" rel="noreferrer noopener">https://doi.org/10.1016/j.ceramint.2024.10.160</a></p> <p>Dataset includes results of TGA analysis, viscosity measurements and mechnaical properties. </p>
3D Printing Simulation Analysis of skeleton gyroid structure (standard, double and graded)_Spoke11_WP4_Task4.1_MOST
<p>These findings provide a comprehensive understanding of the challenges and considerations in 3D printing complex lattice structures, emphasizing the importance of residual stress management, thermal stability, and print direction alignment for optimal mechanical performance.</p>
Supplementary data for study on "Superplastic 3D printed nitinol woven metamaterials lead to dramatic variations of mechanical properties by design"
<p>Raw and processed data from experimental compression testing of 3D printed nitinol lattices and wovens are provided as supplementary materials for the mentioned study, submitted for evaluation to the journal of Virtual and Physical Prototyping.</p>
Predicting Response: Waste-based biopolymer slurry recipe for 3d-printing
<p>Waste-based biopolymer slurry recipe preparation description for 3d-printing. It combines cellulose floc fibers and xanthan gum. </p> <p>This recipe has been used for the print experiment in the paper:</p> <p>Rossi G., Chiujdea R., Colmo C., ElAlami C., Nicholas P., Tamke M., Ramsgaard Thomsen M. (2021) A material monitoring framework: tracking the curing of 3d printed cellulose-based biopolymers. In Acadia 2021 Realignments. </p>
Data set for publication Sikora P., Techman M., Federowicz K., El-Khayatt A.M., Saudi H.A., Abd Elrahman M., Hoffmann M., Stephan D., Chung S.-Y. Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens. Case Studies in Construction Materials (2022), 17, e01320.
<p>Open dataset for publication Sikora P., Techman M., Federowicz K., El-Khayatt A.M., Saudi H.A., Abd Elrahman M., Hoffmann M., Stephan D., Chung S.-Y. Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens. <strong>Case Studies in Construction Materials (2022)</strong>, 17, e01320. <a href="https://doi.org/10.1016/j.cscm.2022.e01320">https://doi.org/10.1016/j.cscm.2022.e01320</a></p> <p>File 1 - Mechanical characteristics - *.opju (Origin)</p> <p>File 2 - Particle size distributions of used materials - *.opju (Origin)</p> <p>File 3 - Sorptivity measurement data - *.opju (Origin)</p> <p>File 4 - G-code for printing of 1 layered specimen - *txt</p> <p>File 5 - G-code for printing of 3 layered specimens - *txt</p>
Data to the manuscript 'Imperfect cross-linking of Xanthan for pH-responsive bio-based composite moist wound dressings by stencil printing'
<p>Evaluation data for the manuscript stated above. For follow-up evaluation, files have to be arranged according to file designation in the scripts uploaded. There is no additional description of how to arrange. Please feel free to contact the first author for help and information.</p>
G-Code associated to the trajectories of the brush in ApPEARS deliverable D5.1 Database of vector based brush strokes and sample prints that demonstrate the range of printed materials
<p>This is appendix for the ApPEARS Deliverable: D5.1 – Database of vector based brush strokes and sample prints that demonstrate the range of printed materials. It contains G-Code Paths associated to the trajectories of the brush.</p>
Images of the data brushes generated for the ApPEARS deliverable D5.1 Database of vector based brush strokes and sample prints that demonstrate the range of printed materials
<p>These images are appendices of ApPEARS deliverable D5.1 Database of vector based brush strokes and sample prints that demonstrate the range of printed materials. They show the generated data brushes.</p>
3D Printing Titanium with a Conical Electron Beam
<p>We teamed up with xBeam 3D Metal Printing (https://xbeam3d.com/) to characterise Ti-6Al-4V (Ti64) parts 3D printed using wire and a conical electron beam. In this video, I analyse the β-grain structures of the xBeam test parts, built with 3 different deposition strategies, and present a post-build heat treatment trial to demonstrate that the xBeam process can replicate wrought titanium aerospace parts.</p> <p>Original research paper: https://doi.org/10.1016/j.mtla.2021.101202</p> <p>xBeam 3D Metal Printing: https://xbeam3d.com/</p> <p>Research credits: Alec. E Davis, J. R. Kennedy, D. Strong, D. Kovalchuk, S. Porter, P. B. Prangnell.</p> <p>Video credits: Produced, written, recorded, and performed by Alec E. Davis.</p>
Simplified local infill size optimization for FDM printed PLA parts
<p>The great advantage of additive manufacturing is the fact that hollowed parts with a given infill can be created. However, the standardized commercial slicer software offers a uniform infill pattern creation solution. In engineering practice, the manufactured parts are functional, therefore the appropriate load bearing capacity is mostly mandatory. In this paper a simplified local infill size optimization method has been presented. Based on a Finite Element Analysis the local density of the pattern can be adjusted, according to the emerged local stresses. The results show that independently of the pattern type, if the scaling was applied, the mechanical resistance was improved to the same extent. In case of the worst-performing uniform pattern, 84% improvement in mechanical resistance was achieved with the optimization. In addition, an FDM printing problem has been highlighted, which must be eliminated if the proposed method is used.</p>
Solvent‑activated 3D‑printed electrodes and their electroanalytical potential
<p>Dataset including: electrochemical data, SEM data, surface tension, .stl for the labware design. </p>
Raw and Processed Data of Printed Markets - The Basel Avisblatt (1729-1845)
<p>Switzerland's first advertising journal – the so-called Avisblatt – was published in Basel. It is a typical example of a new market form emerging in 18th century Europe, yet it is also exceptional since all issues from 1729 to 1844/45 are preserved. In the SNF funded research project “Märkte auf Papier” at the University of Basel (PI: Prof. Dr. Susanna Burghartz), this serial source has been digitized and used to investigate economic, social and societal transformations of the early capitalist period in Basel. A database of all adverts and announcements was created, totalling 932’000 records and providing different sorts of metadata for each advert. The dataset is made avaiable combined with analytical tools.</p> <ul> <li>first official, public release</li> <li>raw (OCR'd) data, collections (data and meta data) and aggregated tables</li> <li>read and process conveniently with the avisblatt R package</li> </ul>
3D Printing of Personalised Carvedilol Tablets Using Selective Laser Sintering - Underlying Data
<p><strong>Underlying μCT Data for "<em>3D Printing of Personalised Carvedilol Tablets Using Selective Laser Sintering</em>"</strong></p> <p>by <em>Atabak Ghanizadeh Tabriz, Quentin Gonot-Munck, Arnaud Baudoux, Vivek Garg, Richard Farnish, Orestis L. Katsamenis, Ho-Wah Hui, Nathan Boersen, Sandra Roberts, John Jones, and Dennis Douroumis</em></p> <p><em>published in MDPI pharmaceutics<br> In section: Physical Pharmacy and Formulation, Recent Non-oral Dosage Form Development: Focus on 3D-Printed Formulations</em></p> <p><em>The micro- and macro-porosities of representative 3D-printed tablets at 25%, 40%, and 55% laser intensities was measured. SLS-printed components were also characterised by means of X-ray microfocus computed tomography (μCT). Imaging was performed at the University of Southampton’s μ-VIS X-ray Imaging Centre (www.muvis.org) using a customised μCT scanner optimised for 3D X-ray histology (www.xrayhistology.org). The system, which is based on Nikon’s XTH225ST system (Nikon Metrology UK Ltd.)</em></p> <p> </p> <p><strong>Data index</strong></p> <ul> <li>20230206_XRH_3299_OLK_PHAR08603-DOSF_40.zip <ul> <li>Dataset (including ORS Dragonfly analysis file) of object printed at 40% laser power<br> 10 µm voxel size isotropic</li> </ul> </li> <li>20230206_XRH_3299_OLK_PHAR08616-DOSF.zip <ul> <li>Dataset (including ORS Dragonfly analysis file) of object printed at 55% laser power<br> 10 µm voxel size isotropic</li> </ul> </li> <li>20230206_XRH_3299_OLK_PHAR08616-DOSF_25.zip <ul> <li>Dataset (including ORS Dragonfly analysis file) of object printed at 25% laser power<br> 10 µm voxel size isotropic</li> </ul> </li> <li>SLS-3DP_OLK-CorrectRes.xlsx <ul> <li>Analysis results & graphs</li> </ul> </li> </ul> <p><em>X-ray CT analysis conducted using Dragonfly software (v. 2022.1.0.1231; Object Research Systems (ORS) Inc, Montreal, Canada, 2020; software available at http://www.theobjects.com/dragonfly</em></p>
"I'm something of an untrained, unofficial cultural anthropologist myself. Ihave a business interviewing people to capture their personal histories. I'm always interested how people fit into their world and how they affect their world. I'm a graphic designer who works in the same building as the printing presses that I recorded. Iwalk past the presses every day on my way to talk to the folks in the prepress department. I'm on friendly but not drinking terms with the pressmen. I'm a friend with the prepress manager. Three Heidelberg presses are installed side by side in an open warehouse-like room. The presses are about twenty feet long and about five feet high. With their series of four humps or mounds where each printing cylinder is located, the presses remind one of giant, gray, mechanical caterpillars. Each press has a cyan cylinder, a magenta cylinder, a yellow cylinder and a black cylinder – so the humps are brightly colored. The presses are well lit by banks of fluorescent lights hanging from the ceiling over each press. When you walk into the press room you hear the sound of rock music blaring from a boom box radio mixed with the general din of the presses. It is only when you walk up to a press like Idid for the recordings that you really start to hear the individual strains of clicking, clacking and mechanical, syncopated chattering. When I made my recordings I was intrigued by the subtle variations in the sounds produced by these machines that aren't apparent when you first walk through the door. The pressmen were kind enough to allow me to walk right up to the presses and poke my microphone quite close to the rotating press cylinders. Iuse a Danish Pro Audio microphone about the size of a pencil eraser. An extremely sensitive mic with the capacity for capturing loud sounds such as the presses up close. Rotating the mic to one side or the other focused on the unique sounds coming from one cylinder or the other." [Kevin/KMerrell]18 in Collecting Sounds. Online Sharing of Field Recordings as Cultural Practice
"I'm something of an untrained, unofficial cultural anthropologist myself. Ihave a business interviewing people to capture their personal histories. I'm always interested how people fit into their world and how they affect their world. I'm a graphic designer who works in the same building as the printing presses that I recorded. Iwalk past the presses every day on my way to talk to the folks in the prepress department. I'm on friendly but not drinking terms with the pressmen. I'm a friend with the prepress manager. Three Heidelberg presses are installed side by side in an open warehouse-like room. The presses are about twenty feet long and about five feet high. With their series of four humps or mounds where each printing cylinder is located, the presses remind one of giant, gray, mechanical caterpillars. Each press has a cyan cylinder, a magenta cylinder, a yellow cylinder and a black cylinder – so the humps are brightly colored. The presses are well lit by banks of fluorescent lights hanging from the ceiling over each press. When you walk into the press room you hear the sound of rock music blaring from a boom box radio mixed with the general din of the presses. It is only when you walk up to a press like Idid for the recordings that you really start to hear the individual strains of clicking, clacking and mechanical, syncopated chattering. When I made my recordings I was intrigued by the subtle variations in the sounds produced by these machines that aren't apparent when you first walk through the door. The pressmen were kind enough to allow me to walk right up to the presses and poke my microphone quite close to the rotating press cylinders. Iuse a Danish Pro Audio microphone about the size of a pencil eraser. An extremely sensitive mic with the capacity for capturing loud sounds such as the presses up close. Rotating the mic to one side or the other focused on the unique sounds coming from one cylinder or the other." [Kevin/KMerrell]18
Data from: 3D printed digital pneumatic logic for the control of soft robotic actuators
Open the record for dataset details and reuse information.
Detecting anomalies in melt-extruded 3D printed parts using in situ data
Open the record for dataset details and reuse information.
Fig. 3 in A new and improved electric fish finder with resources for printed circuit board fabrication
Fig. 3. Internal view of electric fish finder.
Data from: Evaluation of the Laguerre-Gaussian mode purity produced by 3D-printed microwave spiral phase plates
Computer-aided design software and additive manufacturing provide flexibility in the direct fabrication of multi-material devices. This design and fabrication versatility has been investigated for the manufacture of dielectric spiral phase plates (SPP) to generate electromagnetic waves with helical wave-fronts. Three types of SPPs designed to produce an orbital angular momentum (OAM) mode number l=|1| were additively manufactured using multi-material extrusion and multijet fabrication methods. The phase mode and mode characteristics of transformed helical microwaves as a function of the SPP geometrical features was investigated experimentally in the 12 to 18 GHz frequency range, providing high purity at characteristic frequencies. The SPPs were further combined with an additively manufactured dielectric lens that provided a marked improvement in OAM mode purity. Finally, multiplexing and de-multiplexing of two OAM modes were demonstrated successfully using the optimum SPP geometry and design.
Audible Networks: Connecting Texts through Music in 16th-Century Swiss Printed Ballads
<p>In recent years, researchers of early modern print culture, particularly those concerned with news circulation, have increasingly embraced network analysis to account for the flow of information across different regions and media. Even though most of these studies focus on people or cities as nodes and hubs in networks of news distribution, interrelations on a textual level, such as networks of co-citation, have received some attention as well. These approaches, as well as examples of textual network analysis in media history of more recent periods, can serve as inspiration for the study of early modern printed ballads.<br> Like in other printed objects, connections between different ballads can be discerned on a textual level, i.e. as adaptations of existing lyrics, quotation or the combination of several ballads in one print. However, and perhaps obviously, ballads can also be associated on a musical level. The practice of using already existing, popular melodies as a basis for a new text – commonly referred to as “contrafactum” – has repeatedly been shown to be relevant not only as a mnemonic device, but as a means for alluding to themes of existing songs. Previous studies have suggested that this technique was often consciously employed by the authors of songs in order to add an additional layer of meaning.<br> This paper will present some early deliberations within the framework of an ongoing PhD project on political ballads of the 16th-century Swiss Confederation. The project as a whole examines songs from a perspective of media history, investigating their role in constructing and transmitting ideas and imaginations about diplomatic relations between the confederates. Using the example of “contrafactum-relations”, the paper will explore how a methodology inspired by network analysis might be useful in this endeavour. Based on an initial corpus of around 150 printed ballads (containing both original songs and reprints or adaptations of earlier songs) printed in Switzerland between 1530 and 1600, it will provide a visual representation of the connection between the different songs as a network in which individual printed songs function as nodes and melodies as edges. This will allow for the identification of particularly influential melodies, chains of “musical references” and clusters of songs which share the same melodies. These results, in turn, may be put in relation to the subject matter of the songs in question and compared to text-based networks, thus not only providing visual and quantitative evidence of the practice of contrafactum, but giving insight into the mechanisms by which information is transmitted through this particular medium.</p>
In-house 3-D printed aligners: effect of in vivo ageing on mechanical properties
<p>Dataset for all analyses in the paper.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.