Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
310
datasets available to search
ShareScore release 0.9.0
Dataset results
310 results for “era5”
Daily time series of spatially enhanced relative humidity for Europe at 1000 m resolution (Set 4: 2015 - 2019) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2015 - 2019. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>The data have been reprojected to EU LAEA.</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> EU LAEA (EPSG: 3035)</p> <p>Spatial extent:<br> north: 6874000<br> south: -485000<br> west: 869000<br> east: 8712000</p> <p>Spatial resolution:<br> 1000 m</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in Latitude-Longitude/WGS84 (EPSG: 4326) projection: <a href="http://https://doi.org/10.5281/zenodo.6344066">https://doi.org/10.5281/zenodo.6344066</a></p>
Decadal time series of spatially enhanced relative humidity for Europe at 1000 m resolution (2000 - 2021) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>The resulting relative humidity has been aggregated to decadal averages. Each month is divided into three decades: the first decade of a month covers days 1-10, the second decade covers days 11-20, and the third decade covers days 21-last day of the month.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>The data have been reprojected to EU LAEA.</p> <p>File naming scheme (YYYY = year; MM = month; dD = number of decade):<br> <code>ERA5_land_rh2m_avg_decadal_YYYY_MM_dD.tif</code></p> <p>Projection + EPSG code:<br> EU LAEA (EPSG: 3035)</p> <p>Spatial extent:<br> north: 6874000<br> south: -485000<br> west: 869000<br> east: 8712000</p> <p>Spatial resolution:<br> 1000 m</p> <p>Temporal resolution:<br> Decadal</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in Latitude-Longitude/WGS84 (EPSG: 4326) projection: <a href="http://https://doi.org/10.5281/zenodo.6147830">https://doi.org/10.5281/zenodo.6147830</a></p>
Tropical cyclone and equatorial wave data in ERA5 (1980-2018)
<p><strong>The dataset consists of global tropical cyclone (TC) track and equatorial wave data derived from ERA5 (1980-2018). The dataset was originally used to produce the paper "Equatorial waves as useful precursors to tropical cyclone occurrence and intensification" published in Nature Communications in 2023. </strong>See the Methods section in the article for details.</p> <p><strong>Note</strong>: the TC data are produced by <strong>Kevin Hodges</strong> (Reading University) using the TRACK method (Hodges and Emerton, 2015; Hodges et al., 2017); the wave data are produced by <strong>Gui-Ying Yang</strong> (Reading University) based on the method in Yang et al., 2003. ERA5 data is generated by ECMWF and distributed by the C3S CDS. ERA5 data used in this paper are archived from <a href="https://cds.climate.copernicus.eu/#!/search?text=ERA5&type=dataset">https://cds.climate.copernicus.eu/#!/search?text=ERA5&type=dataset</a>.</p> <p> </p> <p><strong>TC track data </strong>(ERA5 TC-matched.zip)</p> <p>TCs are identified and tracked by cyclonic vorticity centres in the ECMWF fifth generation climate reanalysis (ERA5) from six‐hourly atmospheric data, using the TRACK method (Hodges and Emerton, 2015; Hodges et al., 2017). The TRACK scheme used in this paper includes the following processes. First, the vertical average of the relative vorticity between 850 and 600 hPa is obtained. This is then spatially filtered using spherical harmonics to T63 resolution; the large‐scale background with total wavenumbers n ≤ 5 is removed. Vorticity maxima in the Northern Hemisphere and minima in the Southern Hemisphere are determined on the T63 grid and then used as starting points to obtain the off‐grid locations using B‐spline interpolation and maximisation methods. Then, in the first instance, all positive vorticity centres that exceed 0.5 Cyclonic Vorticity Unit (CVU, with 1.0 CVU=1.0*10<sup>-5</sup> s<sup>-1</sup>) in the range 0°–60°N (negative vorticity centres that are below -0.5 CVU in the range 0°–60°S) are identified through the data time series. The tracking is performed by first initialising a set of tracks using a nearest neighbour method and then refining them by minimising a cost function for track smoothness subject to adaptive constraints on track smoothness and displacement distance in a time step. After the tracking is complete, the full T63 vorticity maxima at levels from 850 hPa up to 200 hPa (850, 700, 600, 500, 400, 300 and 200 hPa) are added to the tracks using a recursive search within a 5° radius (geodesic) of the tracked centre. This is used to test for the existence of a coherent vertical structure and a warm core.</p> <p>A matching process is applied to match the ERA5 tracks against the observed tracks, the Best Track from IBTrACS. An ERA5 track is matched to an IBTrACS track if the mean spatial separation is ≤5° over the corresponding paired track points and it is the track with the smallest separation. This process ensures that the ERA5 tracks are those storms actually ‘observed’ in IBTrACS (but they may have different lifecycle). This means that the ERA5 storm tracks have an extended lifecycle consistent, allowing the analysis of the “pre-TC” features. ERA5 “pre-TCG” is the first point of the above identified TC track in ERA5, which is at an earlier stage than the genesis in IBTrACS (normally the first track point reaching the tropical storm intensity). On average, the ERA5 pre-TCG events are 4.6 days earlier in time, and 2.7 CVU weaker in relative vorticity of the vortex, than the TCG events at the observed TCG time.</p> <p> </p> <p><strong>Wave data (</strong>qvr_coefficient_YYYY_k3-40_p2-10_28plev_era5.nc<strong>)</strong></p> <p>In this dataset, dynamical equatorial waves are derived by projecting global wind and geopotential height data onto an orthogonal basis defined by the horizontal equatorial wave structures obtained from the theory of disturbances to a resting atmosphere on the equatorial <em>β</em>-plane. Six‐hourly horizontal winds and geopotential height in ERA5 are used here. This method identifies horizontal wind (<em>u, v</em>) and geopotential height (<em>Z</em>) structures associated with distinct equatorial waves. Potential equatorial waves are identified by projecting <em>u</em>, <em>v</em> and <em>Z</em> in the tropics (24°S–24°N) at each pressure level onto the different equatorial wave modes, using their sinusoidal structure in the zonal direction and parabolic cylinder functions in the meridional direction. These basis functions used for the wave projection are orthogonal, meaning that the wave structures here are orthogonal since they are pre-described as a series of the basis functions. In the parabolic cylinder functions, the meridional trapping scale is y<sub>0</sub>=6°. Before the projection, a broad-band spectral filter, with wavenumber 3 to 40 and period 2 to 10 days, is applied to separate eastward and westward moving waves.</p> <p>This ERA5 wave dataset contains three equatorial wave modes: westward-moving mixed Rossby-gravity (WMRG) and meridional mode number n=1 and 2 Rossby (R1 and R2) waves. The dataset spans 39 years from 1980 to 2018 covering all seasons, with a 6-hourly interval at 1° resolution on 28 pressure levels from 1000 to 70 hPa. </p> <p> </p> <p>Reference </p> <p>Hodges, K. I., & Emerton, R. (2015). The prediction of Northern Hemisphere tropical cyclone extended life cycles by the ECMWF ensemble and deterministic prediction systems. Part I: Tropical cyclone stage. <em>Monthly Weather Review</em>, 143(12), 5091-5114.</p> <p>Hodges, K., Cobb, A., & Vidale, P. L. (2017). How well are tropical cyclones represented in reanalysis datasets?. <em>Journal of Climate</em>, 30(14), 5243-5264.</p> <p>Yang, G. Y., Hoskins, B., & Slingo, J. (2003). Convectively coupled equatorial waves: A new methodology for identifying wave structures in observational data. <em>Journal of the atmospheric sciences</em>, 60(14), 1637-1654.</p> <p>Feng, X., Yang, G.Y., Hodges, K., & Methven, J. (2023). Equatorial waves as useful precursors to tropical cyclone occurrence and intensification. <em>Nature Communications</em>.</p>
Italy, climate data analyst based on era5 land data
<p>These plots illustrate the results of a climatic analysis conducted in Italy using the ERA5 Land (Copernicus Climate Service), since 1950.</p>
Datos ERA5 Pichilemu 1980-2020
<p>Datos asociados el proyecto RISUE RED21992 del Ministerio de Educación de Chile.</p> <p>Los datos corresponden a salidas grilladas del reanálisis ERA5 con resolución temporal horaria entre los años 1980 y 2020 y dominio espacial entre 33.75°S y 34.75°S y entre 72.5°W y 71.25°W con resolución de 0.25 grados, equivalente a matrices numéricas de 5x6 celdas.</p> <p>Se incluyen las siguientes variables:</p> <ul> <li>Viento componente zonal (oeste-este) a 10 metros del suelo (10u)</li> <li>Viento componente meridional (sur-norte) a 10 metros del suelo (10v)</li> <li>Temperatura del aire a 2m (2t)</li> <li>Temperatura de punto de rocío a 2m (2d)</li> <li>Tasa de precipitación conectiva (crr) </li> <li>Tasa de precipitación de gran escala (lsrr)</li> </ul>
Pertubation Profiles Dataset used for "Convection-generated gravity waves in the tropical lower stratosphere from Aeolus wind profiling and ERA5 reanalysis"
<p>These are the perturbation profiles, from 5km to 29.5km, with a 500m grid. In the study, we picked up the data between tropopause-1km to 22km, which was then squared, smoothed, and averaged into one value. We used a 14 points moving average for the smoothing.</p> <p>The data is from 2018-09 to 2022-09, based on the Aeolus L2B Rayleigh clear wind, using only quality flag 1 data.</p> <p>Please email me at mathieu.ratynski@estaca.eu if you're interested in the 100m resolution version, used in the final version of the manuscript.</p>
Dataset - Downscaling ERA5 Wind Speed Data: A Machine Learning approach considering Topographic Influences
<p>This dataset provides three products:</p> <p><strong>1. The topographic data. </strong></p> <p>These data are provided as GeoTIFF files for Europe with 1km x 1km spatial resolution. These maps include:</p> <ul> <li>Digital Elevation Model (DEM) map: Europe_DEM.tif</li> <li>Slope map: Europe_slope.tif</li> <li>Aspect map: Europe_aspect.tif</li> <li>Topographic Position Index (TPI) with a 5 km radius map: Europe_TPI_5.tif</li> <li>Topographic Position Index (TPI) with a 75 km radius map: Europe_TPI_75.tif</li> <li>Terrain Diversity Index (TDI) map: Europe_TDI.tif</li> </ul> <p>These data can be used as input maps for the preprocessing step. In addition, the two TPI maps can also be used in the regression process.</p> <p><strong>2. The resulting map of the preprocessing step.</strong> </p> <p>This map offers predictions on the quality of ERA5 data across Europe and is also provided as a GeoTIFF file with 1km x 1km spatial resolution under the name:</p> <ul> <li> Europe_classification.tif</li> </ul> <p>In this map, Class1 represents a good ERA5 quality with an RMSE of less than 1.5 m/s, Class2 represents a moderate ERA5 quality with an RMSE bigger than 1.5 m/s but less than 3 m/s, while Class 3 indicates a poor ERA5 quality with an RMSE greater than 3 m/s.</p> <p><strong>3. The downscaled wind speed time series data. </strong></p> <p>Europe has been divided into 64 equal area blocks to accommodate the large data size. Each downscaled dataset is provided as a NetCDF file, offering hourly wind speed time series for a year (8760 hours) at approximately 1km x 1km spatial resolution. Each NetCDF file has three dimensions: 'lon' representing longitude, 'lat' representing latitude, and 'time' representing the hour. The variable name for wind speed in the NetCDF file is 'WindSpeed'. The 'WindSpeed' variable is stored as an Int32 data type in the NetCDF file, with values multiplied by 10000 in order to significantly reduce the data size. To utilize this variable, please divide it by 10000.</p> <p>For regions identified as Class1 and Class2, the downscaled wind speed is obtained through a simple nearest neighbour spatial interpolation of ERA5 due to the good quality of ERA5 in these regions. However, for the regions identified as Class3, the downscaled wind speed is derived using the machine learning-based regression approach described in the relevant publication. The geographic extent and the visual representation for each block are provided in 'Readme.pdf' document.</p> <p> </p> <p>To cite this dataset, please cite our published paper in Environmental Research Letters (<strong>DOI:</strong> 10.1088/1748-9326/aceb0a)</p>
Hourly ERA5-land data (T2m, SD and TP) from 2015-01-01 to 2022-12-31 for Troms and Finnmark (Norway)
<p>This dataset contains hourly values of 2m air temperature, snow depth and total precipitation from the ERA5-land reanalysis from 2015-01-01 to 2022-12-31.</p> <p>The geographical area of interest corresponds to the Troms and Finnmark counties in Norway.</p> <p>Along with 10.5281/zenodo.8142734 this is to be used as input to forecast vegetation browning in Troms and Finnmark using machine learning.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1951
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1951.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1950
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1950.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximun, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1959
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1959.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1956
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1956.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1957
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1957.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1958
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1958.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1955
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1955.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1960
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1960.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1954
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1954.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1952
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1952.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1953
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1953.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for the Latin America region, 1973
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land eight selected indicators, covering the Latin America region, for 1973.</p><p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p><p>For 2m dewpoint pressure, 10m u component of wind, 10m v component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean and minimum were used for aggregation.</p><p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.