Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
306
datasets available to search
ShareScore release 0.7.1
Dataset results
306 results for “Autonomous vehicle”
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-21
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-21.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 31.12 GB of MP4 files, which were trimmed into 6728 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.9% of these extracted images are useful and 0.1% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 97.96 %, Q2: 1.99 %, Q5: 0.05 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://ceruleansonar.com/products/sounder-s500" target="_blank">S500</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.113 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-08
<i>This dataset was collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-08.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 80.87 GB of MP4 files, which were trimmed into 18003 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 2.77% of these extracted images are useful and 97.23% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 59.71 %, Q2: 0.72 %, Q5: 39.57 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.66 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-19
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-19.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 55.05 GB of MP4 files, which were trimmed into 10142 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.78% of these extracted images are useful and 0.22% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 98.42 %, Q2: 1.5 %, Q5: 0.08 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://ceruleansonar.com/products/sounder-s500" target="_blank">S500</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.088 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-08
<i>This dataset was collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-08.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 77.52 GB of MP4 files, which were trimmed into 17379 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 67.48% of these extracted images are useful and 32.52% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 76.69 %, Q2: 2.36 %, Q5: 20.96 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.521 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2023-12-04
<i>This dataset was collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2023-12-04.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 23.64 GB of MP4 files, which were trimmed into 8128 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.96% of these extracted images are useful and 0.04% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 98.38 %, Q2: 1.54 %, Q5: 0.08 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.162 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-21
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-21.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 49.8 GB of MP4 files, which were trimmed into 10540 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.56% of these extracted images are useful and 0.44% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 86.9 %, Q2: 12.89 %, Q5: 0.21 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://ceruleansonar.com/products/sounder-s500" target="_blank">S500</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.131 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2024-05-17
<i>This dataset was collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2024-05-17.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 26.38 GB of MP4 files, which were trimmed into 8529 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.84% of these extracted images are useful and 0.16% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 89.43 %, Q2: 4.64 %, Q5: 5.93 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.118 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-07
<i>This dataset was collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-07.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 46.15 GB of MP4 files, which were trimmed into 10479 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 2.2% of these extracted images are useful and 97.8% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 59.06 %, Q2: 2.14 %, Q5: 38.79 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.672 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-06
<i>This dataset was collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-06.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 82.86 GB of MP4 files, which were trimmed into 18809 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 69.62% of these extracted images are useful and 30.38% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 55.29 %, Q2: 1.04 %, Q5: 43.67 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.652 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2023-12-04
<i>This dataset was collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2023-12-04.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 28.62 GB of MP4 files, which were trimmed into 7540 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.95% of these extracted images are useful and 0.05% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 93.98 %, Q2: 5.85 %, Q5: 0.17 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.137 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-13
<i>This dataset was collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-13.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 79.97 GB of MP4 files, which were trimmed into 17664 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 32.22% of these extracted images are useful and 67.78% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 87.27 %, Q2: 3.22 %, Q5: 9.51 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.556 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2023-12-03
<i>This dataset was collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2023-12-03.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 37.98 GB of MP4 files, which were trimmed into 5590 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 100.0% of these extracted images are useful and 0.0% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 92.73 %, Q2: 1.28 %, Q5: 5.99 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.17 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2024-04-26
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2024-04-26.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 21.77 GB of MP4 files, which were trimmed into 7546 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.75% of these extracted images are useful and 0.25% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 86.0 %, Q2: 8.25 %, Q5: 5.75 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.24 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-18
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-18.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 46.99 GB of MP4 files, which were trimmed into 8877 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.8% of these extracted images are useful and 0.2% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 81.7 %, Q2: 17.73 %, Q5: 0.57 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://ceruleansonar.com/products/sounder-s500" target="_blank">S500</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.138 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Tessier, Réunion - 2024-05-15
<i>This dataset was collected by an Autonomous Surface Vehicle in Tessier, Réunion - 2024-05-15.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 29.99 GB of MP4 files, which were trimmed into 10696 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 98.27% of these extracted images are useful and 1.73% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 80.82 %, Q2: 12.41 %, Q5: 6.77 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.129 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-18
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-18.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 7.04 GB of MP4 files, which were trimmed into 1201 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.08% of these extracted images are useful and 0.92% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 18.85 %, Q2: 5.26 %, Q5: 75.89 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.272 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-18
<i>This dataset was collected by an Autonomous Surface Vehicle in St-Leu, Réunion - 2023-10-18.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 10.31 GB of MP4 files, which were trimmed into 2017 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.8% of these extracted images are useful and 0.2% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 47.99 %, Q2: 6.52 %, Q5: 45.49 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.18 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-06
<i>This dataset was collected by an Autonomous Surface Vehicle in Boucan, Réunion - 2023-09-06.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 67.33 GB of MP4 files, which were trimmed into 15189 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 67.35% of these extracted images are useful and 32.65% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 28.98 %, Q2: 7.89 %, Q5: 63.13 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 25.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.455 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2024-04-19
<i>This dataset was collected by an Autonomous Surface Vehicle in Trou-Deau, Réunion - 2024-04-19.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 31.85 GB of MP4 files, which were trimmed into 10594 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 99.98% of these extracted images are useful and 0.02% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 87.06 %, Q2: 11.22 %, Q5: 1.72 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 50.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.161 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by an Autonomous Surface Vehicle in Tessier, Réunion - 2024-04-12
<i>This dataset was collected by an Autonomous Surface Vehicle in Tessier, Réunion - 2024-04-12.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 20.92 GB of MP4 files, which were trimmed into 3689 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 97.72% of these extracted images are useful and 2.28% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> The data was processed with a PPK workflow to achieve centimeter-level GPS accuracy. <br> Base : Files coming from rtk a GPS-fixed station or any static positioning instrument which can provide with correction frames. <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 88.63 %, Q2: 7.51 %, Q5: 3.86 % <br> <h2> Bathymetry </h2> The data are collected using a single-beam echosounder <a href="https://www.echologger.com/products/single-frequency-echosounder-deep" target="_blank">ETC 400</a>. <br> We only keep the values which have a GPS correction in Q1.<br> We keep the points that are the waypoints.<br> We keep the raw data where depth was estimated between 0.2 m and 10.0 m deep. <br> The data are first referenced against the WGS84 ellipsoid. Then we apply the local geoid if available.<br> At the end of processing, the data are projected into a homogeneous grid to create a raster and a shapefiles. <br> The size of the grid cells is 0.734 m. <br> The raster and shapefiles are generated by linear interpolation. The 3D reconstruction algorithm is ballpivot. <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.