Find research datasets worth reusing

MODIS/Terra Land Surface Temperature/Emissivity Monthly L3 Global 0.05Deg CMG V006

The MOD11C3 Version 6 data product was decommissioned on July 31, 2023. Users are encouraged to use the [MOD11C3 Version 6.1](https://doi.org/10.5067/MODIS/MOD11C3.061) data product.The MOD11C3 Version 6 product provides monthly Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule is a geographic grid with 7,200 columns and 3,600 rows representing the entire globe. The LST&E values in the MOD11C3 product are derived by compositing and averaging the values from the corresponding month of [MOD11C1](https://doi.org/10.5067/MODIS/MOD11C1.006) daily files. Each MOD11C3 product consists of the following layers for daytime and nighttime observations: LSTs, quality control assessments, observation times, view zenith angles, and number of clear-sky observations along with percentage of land in the grid and emissivities from bands 20, 22, 23, 29, 31, and 32. Known Issues* Production of V6 Terra MODIS Land Surface Temperature and Emissivity (LST&E) data products was discontinued on November 16, 2022, due to [significant loss of data retrieval](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=98) following the Constellation Exit Maneuvers.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=6).Improvements/Changes from Previous Versions* Removed cloud-contaminated LSTs from Level 2 and Level 3 LST products.* Updated the coefficient look-up table (LUT) for the split-window algorithm with comprehensive regression analysis of Moderate Resolution Imaging Spectroradiometer (MODIS) simulation data in bands 31 and 32 over wide ranges of surface and atmospheric conditions, especially extending the upper boundary for (LST – Ts-air) in arid and semi-arid regions. Increased the overlap between various sub-ranges to reduce the sensitivity of the algorithm to uncertainties in the input data (i.e., column water vapor and air surface temperature from MOD07).* Made minor adjustments in the classification-based surface emissivity values, especially for bare soil and rocks land cover types.* Tuned the day/night algorithm by adjusting weights to improve performance in desert regions where the incorporated split-window algorithm may not work well.* Generated new gridded LST&E products with a 6 km spatial resolution for 8-day ([MOD11B2](https://doi.org/10.5067/MODIS/MOD11B2.006)) and monthly ([MOD11B3](https://doi.org/10.5067/MODIS/MOD11B3.006)) intervals in response to user community requests.

MODIS/Terra Land Surface Temperature/3-Band Emissivity Daily L3 Global 1km SIN Grid Night V061

A suite of Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature and Emissivity (LST&E) products are available in Collection 6.1. The MOD21 Land Surface Temperature (LST) algorithm differs from the algorithm of the [MOD11](https://doi.org/10.5067/modis/mod11_l2.061) LST products, in that the MOD21 algorithm is based on the ASTER Temperature/Emissivity Separation (TES) technique, whereas the MOD11 uses the split-window technique. The MOD21 TES algorithm uses a physics-based algorithm to dynamically retrieve both the LST and spectral emissivity simultaneously from the MODIS thermal infrared bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during very warm and humid conditions. The MOD21A1N dataset is produced daily from nighttime Level 2 Gridded (L2G) intermediate LST products at a spatial resolution of 1,000 meters. The L2G process maps the daily [MOD21](http://doi.org/10.5067/MODIS/MOD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The nighttime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. The MOD21A1N product contains seven Science Datasets (SDS), which include the calculated LST as well as quality control, the three emissivity bands, view zenith angle, and time of observation. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).Known Issues* Users of MODIS LST products may notice an increase in occurrences of [extreme high temperature outliers](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=117) in the unfiltered MxD21 Version 6 and 6.1 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact both the MxD21 and MxD11 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the MxD21 LST products. Future versions of the MxD21 product will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * In order to mitigate the impact of dust in the MxD21 V6 and 6.1 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis. For more details, refer to this dust and cloud contamination [example documentation](https://landweb.modaps.eosdis.nasa.gov/data/userguide/MOD21_dust_QC_examples.pdf).* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The product utilizes GEOS data replacing MERRA2. * Three new CMG products are available in the MxD21 suite (MxD21C1/C2/C3).

VIIRS/NPP Land Surface Temperature/Emissivity Daily L3 Global 1km SIN Grid Day V001

The VNP21A1D VIIRS Version 1 data product was decommissioned on April 8th, 2025. Users are encouraged to use Version 2 data products, which provide [better calibration and consistency](https://landweb.modaps.eosdis.nasa.gov/data/userguide/VIIRS_Land_C2_Changes_09152022.pdf) for the end user. VIIRS Version 2 data products are available from both the SNPP ([VNP21A1D](https://doi.org/10.5067/VIIRS/VNP21A1D.002)) and NOAA-20 ([VJ121A1D]( https://doi.org/10.5067/VIIRS/VJ121A1D.002)) satellites.The NASA/NOAA Suomi National Polar-orbiting Partnership (Suomi NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) Land Surface Temperature and Emissivity (LST&E) Day Version 1 product (VNP21A1D) is compiled daily from daytime Level 2 Gridded (L2G) intermediate products. The L2G process maps the daily [VNP21](https://doi.org/10.5067/VIIRS/VNP21.001) swath granules onto a sinusoidal MODIS grid and stores all observations overlapping a gridded cell for a given day. The VNP21A1 algorithm sorts through all these observations for each cell and estimates the final LST value as an average from all cloud-free observations that have good LST accuracies. The daytime average is weighted by the observation coverage for that cell. Only observations having observation coverage more than a certain threshold (15%) are considered for this averaging. The 1 kilometer dataset is derived through resampling the native 750 meter VIIRS resolution in the input product.The VNP21A1D product is developed synergistically with the Moderate Resolution Imaging Spectroradiometer (MODIS) LST&E Version 6 product (MOD21A1D) using the same input atmospheric products and algorithmic approach. The overall objective for NASA VIIRS products is to ensure the algorithms and products are compatible with the MODIS Terra and Aqua algorithms to promote the continuity of the Earth Observation System (EOS) mission. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD). VIIRS LST&E products are available 2 months after acquisition due to latency of data inputs.The VNP21A1D product contains seven Science Datasets (SDS): LST, quality control, emissivity for bands M14, M15, and M16, view zenith angle, and time of observation. A low-resolution browse image for LST is also available for each VNP21A1D granule.Known Issues* Users of VIIRS and MODIS LST products may notice an increase in occurrences of [extreme high temperature outliers](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=707) in the unfiltered VNP21 and MxD21 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact MxD11, MxD21, and VNP21 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the VNP21 and MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in VNP21 and MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the VNP21 and MxD21 LST products. Future versions of the VNP21 and MxD21 products will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * To mitigate the impact of dust in the VNP21 and MxD21 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis. For more details, refer to this dust and cloud contamination [example documentation](https://landweb.modaps.eosdis.nasa.gov/QA_WWW/forPage/MOD21_dust_QC_examples.pdf).* VNP21 v001 products utilize the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) as an input. This may result in product latency of a month or more. * For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis

VIIRS/JPSS1 Land Surface Temperature/Emissivity Monthly L3 Global 0.05Deg CMG V002

The NOAA-20 Visible Infrared Imaging Radiometer Suite (VIIRS) Land Surface Temperature and Emissivity (LST&E) monthly Climate Modeling Grid Version 2 product (VJ121C3) provides LST&E by a process of selecting the best available pixel over a monthly acquisition period at 0.05 degree (~5,600 meter) resolution. The VJ121C3 dataset is a monthly composite LST&E product that uses an algorithm based on a simple averaging method and is formatted as a CMG for use in climate simulation models. The algorithm calculates the average from all the cloud free [VJ121A1D](http://doi.org/10.5067/VIIRS/VJ121A1D.002) and [VJ121A1N](http://doi.org/10.5067/VIIRS/VJ121A1N.002) daily acquisitions from the monthly period. Unlike the VJ121A1 data sets where the daytime and nighttime acquisitions are separate products, the VJ121C3 contains both daytime and nighttime acquisitions as separate Science Dataset (SDS) layers within a single Hierarchical Data Format (HDF) file. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).The VJ121C3 product contains 25 Science Datasets (SDS): LST, quality control, view zenith angle, and time of observation for both day and night observations along with emissivity for bands M14, M15, and M16. Low-resolution browse images for day and night LST are also available for each VJ121C3 granule.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=VIIRS) and the User Guide.Improvements/Changes from Previous Version* Improved calibration algorithm and coefficients for entire NOAA-20 mission.* Improved geolocation accuracy and applied updates to fix outliers around maneuver periods.* Corrected the aerosol quantity flag (low, average, high) mainly over brighter surfaces in the mid- to high-latitudes such as desert and tropical vegetation areas. This has an impact on the retrieval of other downstream data products such as VNP13 Vegetation Indices and VNP43 Bidirectional Reflectance Distribution Function (BRDF)/Albedo.* Improved cloud mask input product for corrections along coastlines and artifacts from use of coarse resolution climatology data. * Replaced the land/water mask input product with the eight-class land/water mask from the VNP03 geolocation product that better aligns with MODIS.* Replaced MERRA2 inputs with GEOS5.* Included inland water body pixels to allow for LST retrieval over these areas.* Introduced daily, 8-day, and monthly LST CMG products.* More details can be found in this [VIIRS Land V2 Changes document](https://landweb.modaps.eosdis.nasa.gov/data/userguide/VIIRS_Land_C2_Changes_09152022.pdf).

MODIS/Terra Land Surface Temperature/Emissivity Daily L3 Global 0.05Deg CMG V061

The Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature/Emissivity Daily (MOD11C1) Version 6.1 product provides daily Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). The MOD11C1 product is directly derived from the [MOD11B1](https://doi.org/10.5067/MODIS/MOD11B1.061) product. A CMG granule follows a Geographic grid, having 7,200 columns and 3,600 rows, which represent the entire globe. Each MOD11C1 product consists of the following layers for daytime and nighttime observations: LSTs, quality control assessments, observation times, view zenith angles, number of clear-sky observations, and emissivities from bands 20, 22, 23, 29, 31, and 32 (bands 31 and 32 are daytime only) along with the percentage of land in the grid. Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

MODIS/Aqua Land Surface Temperature/Emissivity Daily L3 Global 0.05Deg CMG V006

The MYD11C1 Version 6 data product was decommissioned on July 31, 2023. Users are encouraged to use the [MYD11C1 Version 6.1](https://doi.org/10.5067/MODIS/MYD11C1.061) data product.The MYD11C1 Version 6 product provides daily Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). The MYD11C1 product is directly derived from the [MYD11B1](https://doi.org/10.5067/MODIS/MYD11B1.006) product. A CMG granule follows a Geographic grid, having 7,200 columns and 3,600 rows, which represent the entire globe. Each MYD11C1 product consists of the following layers for daytime and nighttime observations: LSTs, quality control assessments, observation times, view zenith angles, number of clear-sky observations, and emissivities from bands 20, 22, 23, 29, 31, and 32 (bands 31 and 32 are daytime only) along with the percentage of land in the grid. Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Aqua&as=6).Improvements/Changes from Previous Versions* Removed cloud-contaminated LSTs from Level 2 and Level 3 LST products.* Updated the coefficient look-up table (LUT) for the split-window algorithm with comprehensive regression analysis of Moderate Resolution Imaging Spectroradiometer (MODIS) simulation data in bands 31 and 32 over wide ranges of surface and atmospheric conditions, especially extending the upper boundary for (LST – Ts-air) in arid and semi-arid regions. Increased the overlap between various sub-ranges to reduce the sensitivity of the algorithm to uncertainties in the input data (i.e., column water vapor and air surface temperature from MYD07).* Made minor adjustments in the classification-based surface emissivity values, especially for bare soil and rocks land cover types.* Tuned the day/night algorithm by adjusting weights to improve performance in desert regions where the incorporated split-window algorithm may not work well.* Generated new gridded LST&E products with a 6 km spatial resolution for 8-day ([MYD11B2](https://doi.org/10.5067/MODIS/MYD11B2.006)) and monthly ([MYD11B3](https://doi.org/10.5067/MODIS/MYD11B3.006)) intervals in response to user community requests.

MODIS/Aqua Land Surface Temperature/3-Band Emissivity 5-Min L2 1km V061

The MYD21 Version 6.1 Land Surface Temperature and Emissivity (LST&E) swath data product is produced daily in five minute temporal increments of satellite acquisition. The swath is approximately 2,030 pixels along track and 1,354 pixels per line, at a nadir resolution of 1,000 meters. The MYD21 Land Surface Temperature (LST) algorithm differs from the [MYD11](https://doi.org/10.5067/modis/myd11_l2.061) algorithm in that the MYD21 LST algorithm is based on the ASTER Temperature/Emissivity Separation (TES) technique, whereas the MYD11 uses the split-window technique. The MYD21 TES algorithm uses a physics-based algorithm to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during very warm and humid conditions. Additional details regarding the method used to create this Level 2 (L2) product are available in the Algorithm Theoretical Basis Document (ATBD). Known Issues* Users of MODIS LST products may notice an increase in occurrences of [extreme high temperature outliers](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=117) in the unfiltered MxD21 Version 6 and 6.1 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact both the MxD21 and MxD11 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the MxD21 LST products. Future versions of the MxD21 product will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * In order to mitigate the impact of dust in the MxD21 V6 and 6.1 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis. For more details, refer to this dust and cloud contamination [example documentation](https://landweb.modaps.eosdis.nasa.gov/data/userguide/MOD21_dust_QC_examples.pdf).* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Aqua&as=61).Improvments/Changes from Previous Version* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The product utilizes GEOS data replacing MERRA2.* Three new CMG products are available in the MxD21 suite (MxD21C1/C2/C3).

MODIS/Terra Land Surface Temperature/3-Band Emissivity 8-Day L3 Global 0.05Deg CMG V061

A suite of Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature and Emissivity (LST&E) products are available in Collection 6.1. The MOD21 Land Surface Temperature (LST) algorithm differs from the algorithm of the [MOD11](https://doi.org/10.5067/modis/mod11_l2.061) LST products, in that the MOD21 algorithm is based on the ASTER Temperature/Emissivity Separation (TES) technique, whereas the MOD11 uses the split-window technique. The MOD21 TES algorithm uses a physics-based algorithm to dynamically retrieve both the LST and spectral emissivity simultaneously from the MODIS thermal infrared bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during very warm and humid conditions. The MOD21C2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](http://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](http://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Unlike the MOD21A1 data sets where the daytime and nighttime acquisitions are separate products, the MOD21A2 contains both daytime and nighttime acquisitions as separate Science Dataset (SDS) layers within a single Hierarchical Data Format (HDF) file. The LST, Quality Control (QC), view zenith angle, and viewing time have separate day and night SDS layers, while the values for the MODIS emissivity bands 29, 31, and 32 are the average of both the nighttime and daytime acquisitions. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).Known Issues* Users of MODIS LST products may notice an increase in occurrences of [extreme high temperature outliers](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=117) in the unfiltered MxD21 Version 6 and 6.1 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact both the MxD21 and MxD11 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the MxD21 LST products. Future versions of the MxD21 product will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * In order to mitigate the impact of dust in the MxD21 V6 and 6.1 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis. For more details, refer to this dust and cloud contamination [example documentation](https://landweb.modaps.eosdis.nasa.gov/data/userguide/MOD21_dust_QC_examples.pdf).* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The product utilizes GEOS data replacing MERRA2. * Three new CMG products are available in the MxD21 suite (MxD21C1/C2/C3).

VIIRS/NPP Land Surface Temperature/Emissivity 8-Day L3 Global 1km SIN Grid V002

The NASA/NOAA Suomi National Polar-orbiting Partnership (Suomi NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) Land Surface Temperature and Emissivity (LST&E) 8-day product (VNP21A2) combines the daily [VNP21A1D](http://doi.org/10.5067/VIIRS/VNP21A1D.002) and [VNP21A1N](http://doi.org/10.5067/VIIRS/VNP21A1N.002) products over an 8-day compositing period into a single product.The VNP21A2 dataset is an 8-day composite LST&E product at 1 kilometer resolution that uses an algorithm based on a simple-averaging method. The algorithm calculates the average from all the cloud-free VNP21A1D and VNP21A1N daily acquisitions from the 8-day period. Unlike the VNP21A1 datasets where the daytime and nighttime acquisitions are separate products, the VNP21A2 contains both daytime and nighttime acquisitions as separate science dataset (SDS) layers within a single Hierarchical Data Format (HDF) file.The VNP21A2 product is developed synergistically with the Moderate Resolution Imaging Spectroradiometer (MODIS) LST&E Version 6.1 product ([MOD21A2](https://doi.org/10.5067/MODIS/MOD21A2.061)) using the same input atmospheric products and algorithmic approach. The overall objective for NASA VIIRS products is to ensure the algorithms and products are compatible with the MODIS Terra and Aqua algorithms to promote the continuity of the Earth Observation System (EOS) mission. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).The VNP21A2 product contains 11 Science Datasets (SDS): LST, quality control, view zenith angle, and time of observation for both day and night observations along with emissivity for bands M14, M15, and M16. Low-resolution browse images for day and night LST are also available for each VNP21A2 granule.Known Issues* Users of VIIRS and MODIS LST products may notice an increase in occurrences of extreme high temperature outliers in the unfiltered VNP21 and MxD21 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact MxD11, MxD21, and VNP21 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the VNP21 and MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in VNP21 and MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the VNP21 and MxD21 LST products. Future versions of the VNP21 and MxD21 products will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * To mitigate the impact of dust in the VNP21 and MxD21 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=VIIRS).Improvements/Changes from Previous Versions* Improved calibration algorithm and coefficients for entire Suomi NPP mission.* Improved geolocation accuracy and applied updates to fix outliers around maneuver periods.* Corrected the aerosol quantity flag (low, average, high) mainly over brighter surfaces in the mid- to high-latitudes such as desert and tropical vegetation areas. This has an impact on the retrieval of other downstream data products such as VNP13 Vegetation Indices and VNP43 Bidirectional Reflectance Distribution Function (BRDF)/Albedo.* Improved cloud mask input product for corrections along coastlines and artifacts from use of coarse resolution climatology data. * Replaced the land/water mask input product with the eight-class land/water mask from the VNP03 geolocation product that better aligns with MODIS.* Replaced MERRA2 inputs with GEOS5.* Included inland water body pixels to allow for LST retrieval

VIIRS/NPP Land Surface Temperature/Emissivity Monthly L3 Global 0.05Deg CMG V002

The NASA/NOAA Suomi National Polar-orbiting Partnership (Suomi NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) Land Surface Temperature and Emissivity (LST&E) monthly Climate Modeling Grid Version 2 product (VNP21C3) provides LST&E by a process of selecting the best available pixel over a monthly acquisition period at 0.05 degree (~5,600 meter) resolution. The VNP21C3 dataset is a monthly composite LST&E product that uses an algorithm based on a simple averaging method and is formatted as a CMG for use in climate simulation models. The algorithm calculates the average from all the cloud free [VNP21A1D](http://doi.org/10.5067/VIIRS/VNP21A1D.002) and [VNP21A1N](http://doi.org/10.5067/VIIRS/VNP21A1N.002) daily acquisitions from the monthly period. Unlike the VNP21A1 data sets where the daytime and nighttime acquisitions are separate products, the VNP21C3 contains both daytime and nighttime acquisitions as separate Science Dataset (SDS) layers within a single Hierarchical Data Format (HDF) file.Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).The VNP21C3 product contains 25 Science Datasets (SDS): LST, quality control, view zenith angle, and time of observation for both day and night observations along with emissivity for bands M14, M15, and M16. Low-resolution browse images for day and night LST are also available for each VNP21C3 granule.Known Issues* Users of VIIRS and MODIS LST products may notice an increase in occurrences of extreme high temperature outliers in the unfiltered VNP21 and MxD21 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact MxD11, MxD21, and VNP21 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the VNP21 and MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in VNP21 and MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the VNP21 and MxD21 LST products. Future versions of the VNP21 and MxD21 products will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * To mitigate the impact of dust in the VNP21 and MxD21 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=VIIRS).Improvements/Changes from Previous Versions* Improved calibration algorithm and coefficients for entire Suomi NPP mission.* Improved geolocation accuracy and applied updates to fix outliers around maneuver periods.* Corrected the aerosol quantity flag (low, average, high) mainly over brighter surfaces in the mid- to high-latitudes such as desert and tropical vegetation areas. This has an impact on the retrieval of other downstream data products such as VNP13 Vegetation Indices and VNP43 Bidirectional Reflectance Distribution Function (BRDF)/Albedo.* Improved cloud mask input product for corrections along coastlines and artifacts from use of coarse resolution climatology data. * Replaced the land/water mask input product with the eight-class land/water mask from the VNP03 geolocation product that better aligns with MODIS.* Replaced MERRA2 inputs with GEOS5.* Included inland water body pixels to allow for LST retrieval over these areas.* Introduced daily, 8-day, and monthly LST CMG products.* More details can be found in this [VIIRS Land V2 Changes document](https://landweb.modaps.eosdis.nasa.gov/data/userguide/VIIRS_Land_C2_Changes_09152022.pdf).

MODIS/Aqua Land Surface Temperature/Emissivity 8-Day L3 Global 0.05Deg CMG V061

The Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature/Emissivity 8-Day (MYD11C2) Version 6.1 product provides Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule follows a geographic grid with 7,200 columns and 3,600 rows, representing the entire globe. The LST&E values in the MYD11C2 product are derived by compositing and averaging the values from the corresponding eight [MYD11C1](https://doi.org/10.5067/MODIS/MYD11C1.061) daily files. The MYD11C2 granule consists of 17 layers. Each MYD11C2 product consists of the following layers for daytime and nighttime observations: LSTs, quality control assessments, observation times, view zenith angles, and number of clear-sky observations along with percentage of land in the grid and emissivities from bands 20, 22, 23, 29, 31, and 32. Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Aqua&as=61).Improvments/Changes from Previous Version* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

MODIS/Terra Land Surface Temperature/Emissivity 8-Day L3 Global 6km SIN Grid V061

The Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature/Emissivity 8-Day (MOD11B2) Version 6.1 product provides an average 8-day per pixel Land Surface Temperature and Emissivity (LST&E) in a 1,200 by 1,200 kilometer (km) tile with a pixel size of 5,600 meters (m). Each temperature and emissivity pixel value in the MOD11B2 is a simple average of all the corresponding values from the LST&E values from the [MOD11B1](https://doi.org/10.5067/MODIS/MOD11B1.061) product collected during that 8-day period. Each MOD11B2 granule consists of 19 layers including daytime and nighttime layers for LSTs, quality control assessments, observation times, view zenith angles, and number of clear sky observations along with percentage of land in the tile and emissivities from bands 20, 22, 23, 29, 31, and 32. Unique to the MOD11B products are additional day and night LST layers generated from band 31 of the corresponding 1 km [MOD11_L2](https://doi.org/10.5067/MODIS/MOD11_L2.061) swath product aggregated to the 6 km grid. Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

MODIS/Aqua Land Surface Temperature/Emissivity 5-Min L2 Swath 1km V006

The MYD11_L2 Version 6 data product was decommissioned on July 31, 2023. Users are encouraged to use the [MYD11_L2 Version 6.1](https://doi.org/10.5067/MODIS/MYD11_L2.061) data product.The MYD11_L2 Version 6 swath product provides per-pixel Land Surface Temperature and Emissivity (LST&E) with a pixel size of 1,000 meters (m). The product is produced daily in 5-minute temporal increments of satellite acquisition using the generalized split-window algorithm. MYD11_L2 is a Level 2 product which provides the input for the Level 3 products. Provided in each MYD11_L2 file are LST, quality control assessment, error estimates, bands 31 and 32 emissivities, zenith angle of the pixel view, observation time, and the geographic coordinates for every five scan lines and samples.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Aqua&as=6).Improvements/Changes from Previous Versions* Removed cloud-contaminated LSTs from Level 2 and Level 3 LST products.* Updated the coefficient look-up table (LUT) for the split-window algorithm with comprehensive regression analysis of Moderate Resolution Imaging Spectroradiometer (MODIS) simulation data in bands 31 and 32 over wide ranges of surface and atmospheric conditions, especially extending the upper boundary for (LST – Ts-air) in arid and semi-arid regions. Increased the overlap between various sub-ranges to reduce the sensitivity of the algorithm to uncertainties in the input data (i.e., column water vapor and air surface temperature from MYD07).* Made minor adjustments in the classification-based surface emissivity values, especially for bare soil and rocks land cover types.* Tuned the day/night algorithm by adjusting weights to improve performance in desert regions where the incorporated split-window algorithm may not work well.* Generated new gridded LST&E products with a 6 km spatial resolution for 8-day ([MYD11B2](https://doi.org/10.5067/MODIS/MYD11B2.006)) and monthly ([MYD11B3](https://doi.org/10.5067/MODIS/MYD11B3.006)) intervals in response to user community requests.

MODIS/Terra Land Surface Temperature/3-Band Emissivity Monthly L3 Global 0.05Deg CMG V061

A suite of Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature and Emissivity (LST&E) products are available in Collection 6.1. The MOD21 Land Surface Temperature (LST) algorithm differs from the algorithm of the [MOD11](https://doi.org/10.5067/modis/mod11_l2.061) LST products, in that the MOD21 algorithm is based on the ASTER Temperature/Emissivity Separation (TES) technique, whereas the MOD11 uses the split-window technique. The MOD21 TES algorithm uses a physics-based algorithm to dynamically retrieve both the LST and spectral emissivity simultaneously from the MODIS thermal infrared bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during very warm and humid conditions. The MOD21C3 dataset is a monthly composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](http://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](http://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Unlike the MOD21A1 data sets where the daytime and nighttime acquisitions are separate products, the MOD21A2 contains both daytime and nighttime acquisitions as separate Science Dataset (SDS) layers within a single Hierarchical Data Format (HDF) file. The LST, Quality Control (QC), view zenith angle, and viewing time have separate day and night SDS layers, while the values for the MODIS emissivity bands 29, 31, and 32 are the average of both the nighttime and daytime acquisitions. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).Known Issues* Users of MODIS LST products may notice an increase in occurrences of [extreme high temperature outliers](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=117) in the unfiltered MxD21 Version 6 and 6.1 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact both the MxD21 and MxD11 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the MxD21 LST products. Future versions of the MxD21 product will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * In order to mitigate the impact of dust in the MxD21 V6 and 6.1 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis. For more details, refer to this dust and cloud contamination [example documentation](https://landweb.modaps.eosdis.nasa.gov/data/userguide/MOD21_dust_QC_examples.pdf).* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The product utilizes GEOS data replacing MERRA2. * Three new CMG products are available in the MxD21 suite (MxD21C1/C2/C3).

MODIS/Terra Land Surface Temperature/Emissivity 8-Day L3 Global 0.05Deg CMG V006

The MOD11C2 Version 6 data product was decommissioned on July 31, 2023. Users are encouraged to use the [MOD11C2 Version 6.1](https://doi.org/10.5067/MODIS/MOD11C2.061) data product.The MOD11C2 Version 6 product provides Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule follows a geographic grid with 7,200 columns and 3,600 rows, representing the entire globe. The LST&E values in the MOD11C2 product are derived by compositing and averaging the values from the corresponding eight [MOD11C1](https://doi.org/10.5067/MODIS/MOD11C1.006) daily files. The MOD11C2 granule consists of 17 layers. Each MOD11C2 product consists of the following layers for daytime and nighttime observations: LSTs, quality control assessments, observation times, view zenith angles, and number of clear-sky observations along with percentage of land in the grid and emissivities from bands 20, 22, 23, 29, 31, and 32. Known Issues* Production of V6 Terra MODIS Land Surface Temperature and Emissivity (LST&E) data products was discontinued on November 16, 2022, due to [significant loss of data retrieval](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=98) following the Constellation Exit Maneuvers.* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=6).Improvements/Changes from Previous Versions* Removed cloud-contaminated LSTs from Level 2 and Level 3 LST products.* Updated the coefficient look-up table (LUT) for the split-window algorithm with comprehensive regression analysis of Moderate Resolution Imaging Spectroradiometer (MODIS) simulation data in bands 31 and 32 over wide ranges of surface and atmospheric conditions, especially extending the upper boundary for (LST – Ts-air) in arid and semi-arid regions. Increased the overlap between various sub-ranges to reduce the sensitivity of the algorithm to uncertainties in the input data (i.e., column water vapor and air surface temperature from MOD07).* Made minor adjustments in the classification-based surface emissivity values, especially for bare soil and rocks land cover types.* Tuned the day/night algorithm by adjusting weights to improve performance in desert regions where the incorporated split-window algorithm may not work well.* Generated new gridded LST&E products with a 6 km spatial resolution for 8-day ([MOD11B2](https://doi.org/10.5067/MODIS/MOD11B2.006)) and monthly ([MOD11B3](https://doi.org/10.5067/MODIS/MOD11B3.006)) intervals in response to user community requests.

MODIS/Terra Land Surface Temperature/Emissivity 8-Day L3 Global 1km SIN Grid V061

The Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature/Emissivity 8-Day (MOD11A2) Version 6.1 product provides an average 8-day per-pixel Land Surface Temperature and Emissivity (LST&E) with a 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. Each pixel value in the MOD11A2 is a simple average of all the corresponding [MOD11A1](https://doi.org/10.5067/MODIS/MOD11A1.061) LST pixels collected within that 8-day period. The 8-day compositing period was chosen because twice that period is the exact ground track repeat period of the Terra and Aqua platforms. Provided along with the daytime and nighttime surface temperature bands are associated quality control assessments, observation times, view zenith angles, and clear-sky coverages along with bands 31 and 32 emissivities from land cover types.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

VIIRS/JPSS1 Land Surface Temperature and Emissivity 6-Min L2 Swath 750m V002

The NOAA-20 Visible Infrared Imaging Radiometer Suite (VIIRS) Land Surface Temperature and Emissivity (LST&E) Version 2 swath product (VJ121) is produced daily in 6-minute temporal increments of satellite acquisition. The VJ121 product uses a physics-based algorithm to dynamically retrieve both the LST and emissivity simultaneously for VIIRS thermal infrared bands M14 (8.55 µm), M15 (10.76 µm), and M16 (12 µm) at a spatial resolution of 750 meters.The VJ121 product is developed developed synergistically with the Moderate Resolution Imaging Spectroradiometer (MODIS) LST&E Version 6.1 product ([MOD21](https://doi.org/10.5067/MODIS/MOD21.061)) using the same input atmospheric products and algorithmic approach based on the ASTER Temperature Emissivity Separation (TES) technique. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during very warm and humid conditions. The overall objective for NASA VIIRS products is to ensure the algorithms and products are compatible with the MODIS Terra and Aqua algorithms to promote the continuity of the Earth Observation System (EOS) mission. VIIRS LST&E products are available two months after acquisition due to latency of data inputs. Additional details regarding the method used to create this Level 2 (L2) product are available in the Algorithm Theoretical Basis Document (ATBD).Provided in the VJ121 product are layers for LST, quality control, emissivity for bands M14, M15, and M16, LST&E errors, view angle, ASTER Global Emissivity Dataset (GED), Precipitable Water Vapor (PWV), ocean-land mask, latitude, and longitude. A low-resolution browse image for LST is also available for each VJ121 granule.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=VIIRS) and the User Guide.Improvements/Changes from Previous Version* Improved calibration algorithm and coefficients for entire NOAA-20 mission.* Improved geolocation accuracy and applied updates to fix outliers around maneuver periods.* Corrected the aerosol quantity flag (low, average, high) mainly over brighter surfaces in the mid- to high-latitudes such as desert and tropical vegetation areas. This has an impact on the retrieval of other downstream data products such as VNP13 Vegetation Indices and VNP43 Bidirectional Reflectance Distribution Function (BRDF)/Albedo.* Improved cloud mask input product for corrections along coastlines and artifacts from use of coarse resolution climatology data. * Replaced the land/water mask input product with the eight-class land/water mask from the VNP03 geolocation product that better aligns with MODIS.* Replaced MERRA2 inputs with GEOS5.* Included inland water body pixels to allow for LST retrieval over these areas.* Introduced daily, 8-day, and monthly LST CMG products.* More details can be found in this [VIIRS Land V2 Changes document](https://landweb.modaps.eosdis.nasa.gov/data/userguide/VIIRS_Land_C2_Changes_09152022.pdf).

MODIS/Terra Land Surface Temperature/3-Band Emissivity Daily L3 Global 0.05Deg CMG V061

A suite of Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature and Emissivity (LST&E) products are available in Collection 6.1. The MOD21 Land Surface Temperature (LST) algorithm differs from the algorithm of the [MOD11](https://doi.org/10.5067/modis/mod11_l2.061) LST products, in that the MOD21 algorithm is based on the ASTER Temperature/Emissivity Separation (TES) technique, whereas the MOD11 uses the split-window technique. The MOD21 TES algorithm uses a physics-based algorithm to dynamically retrieve both the LST and spectral emissivity simultaneously from the MODIS thermal infrared bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during very warm and humid conditions. The MOD21C1 dataset is produced daily in a 0.05 degree (5,600 meters at the equator) Climate Modeling Grid (CMG) from daytime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MOD21](http://doi.org/10.5067/MODIS/MOD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21C1 algorithm sorts through these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The daytime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. The MOD21C1 product contains seven Science Datasets (SDS), which include the calculated LST as well as quality control, the three emissivity bands, view zenith angle, and time of observation. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document (ATBD).Known Issues* Users of MODIS LST products may notice an increase in occurrences of [extreme high temperature outliers](https://landweb.modaps.eosdis.nasa.gov/displayissue?id=117) in the unfiltered MxD21 Version 6 and 6.1 products compared to the heritage MxD11 LST products. This can occur especially over desert regions like the Sahara where undetected cloud and dust can negatively impact both the MxD21 and MxD11 retrieval algorithms. * In the MxD11 LST products, these contaminated pixels are flagged in the algorithm and set to fill values in the output products based on differences in the band 32 and band 31 radiances used in the generalized split window algorithm. In the MxD21 LST products, values for the contaminated pixels are retained in the output products (and may result in overestimated temperatures), and users need to apply Quality Control (QC) filtering and other error analyses for filtering out bad values. High temperature outlier thresholds are not employed in MxD21 since it would potentially remove naturally occurring hot surface targets such as fires and lava flows.* High atmospheric aerosol optical depth (AOD) caused by vast dust outbreaks in the Sahara and other deserts highlighted in the example documentation are the primary reason for high outlier surface temperature values (and corresponding low emissivity values) in the MxD21 LST products. Future versions of the MxD21 product will include a dust flag from the MODIS aerosol product and/or brightness temperature look up tables to filter out contaminated dust pixels. It should be noted that in the MxD11B day/night algorithm products, more advanced cloud filtering is employed in the multi-day products based on a temporal analysis of historical LST over cloudy areas. This may result in more stringent filtering of dust contaminated pixels in these products. * In order to mitigate the impact of dust in the MxD21 V6 and 6.1 products, the science team recommends using a combination of the existing QC bits, emissivity values, and estimated product errors, to confidently remove bad pixels from analysis. For more details, refer to this dust and cloud contamination [example documentation](https://landweb.modaps.eosdis.nasa.gov/data/userguide/MOD21_dust_QC_examples.pdf).* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).* The product utilizes GEOS data replacing MERRA2. * Three new CMG products are available in the MxD21 suite (MxD21C1

MODIS/Aqua Land Surface Temperature/Emissivity 5-Min L2 Swath 1km V061

The Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature/Emissivity 5-Minute (MYD11_L2) Version 6.1 swath product provides per-pixel Land Surface Temperature and Emissivity (LST&E) with a pixel size of 1,000 meters (m). The product is produced daily in 5-minute temporal increments of satellite acquisition using the generalized split-window algorithm. MYD11_L2 is a Level 2 product which provides the input for the Level 3 products. Provided in each MYD11_L2 file are LST, quality control assessment, error estimates, bands 31 and 32 emissivities, zenith angle of the pixel view, observation time, and the geographic coordinates for every five scan lines and samples.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Aqua&as=61).Improvments/Changes from Previous Version* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

MODIS/Aqua Land Surface Temperature/Emissivity Daily L3 Global 1km SIN Grid V061

The Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature/Emissivity Daily (MYD11A1) Version 6.1 product provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. The pixel temperature value is derived from the [MYD11_L2](https://doi.org/10.5067/MODIS/MYD11_L2.061) swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. Provided along with the daytime and nighttime surface temperature bands are associated quality control assessments, observation times, view zenith angles, and clear-sky coverages along with bands 31 and 32 emissivities from land cover types.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Aqua&as=61).Improvments/Changes from Previous Version* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).