Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
43
datasets available to search
ShareScore release 0.9.0
Dataset results
43 results for “IODP Expedition 360”
IODP Expedition 391 Whole-round core section composite 360 degree images
Images of the outside of hard rock whole-round sections were acquired using a linescan imager (Section Half Imaging Logger [SHIL]) and a special holder that allows each 90 degree segment of the outer surface to be positioned properly. The images were taken at a resolution of 20 lines/mm (50 micropixels). JRSO staff take these quadrant images and compile them into a side-by-side rollout photograph of the section. Composite images are available as both JPG and TIF image formats. Individual quadrant images are available as JPG images only through this report; contact the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a> if quadrant TIF files (~160 MB) are needed.
IODP Expedition 397T Whole-round core section composite 360 degree images
Images of the outside of hard rock whole-round sections were acquired using a linescan imager (Section Half Imaging Logger [SHIL]) and a special holder that allows each 90 degree segment of the outer surface to be positioned properly. The images were taken at a resolution of 20 lines/mm (50 micropixels). JRSO staff take these quadrant images and compile them into a side-by-side rollout photograph of the section. Composite images are available as both JPG and TIF image formats. Individual quadrant images are available as JPG images only through this report; contact the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a> if quadrant TIF files (~160 MB) are needed.
IODP Expedition 367 Whole-round core section composite 360 degree images
Images of the outside of hard rock whole-round sections were acquired using a linescan imager (Section Half Imaging Logger [SHIL]) and a special holder that allows each 90 degree segment of the outer surface to be positioned properly. The images were taken at a resolution of 20 lines/mm (50 micropixels). JRSO staff take these quadrant images and compile them into a side-by-side rollout photograph of the section. Composite images are available as both JPG and TIF image formats. Individual quadrant images are available as JPG images only through this report; contact the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a> if quadrant TIF files (~160 MB) are needed.
IODP Expedition 360 Photomicrographs
Microscopic images of discrete samples were acquired using stereo and upright light microscopes and captured on digital cameras. Image files were uploaded along with a brief description and a record of the microscopic and lighting conditions when the image was taken.
IODP Expedition 360 Sample report
Report includes detailed information about samples taken for testing: location/depth, type/form factor, test, request number, and database identifier.
IODP Expedition 360 Section summary
Report includes data for individual core sections: coring/drilling depths and recovery, database identifiers for the whole section and section halves, and number of samples taken from the section before and after splitting.
IODP Expedition 360 Scanning electron microscope images
Microscopic images of discrete samples were acquired using a scanning electron microscope (SEM) and captured as image files. These files were uploaded along with a brief description and a record of the microscopic conditions when the image was taken.
IODP Expedition 360 Moisture and Density
Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.
IODP Expedition 360 Carbonates composite report
This composite report includes data from two analyses (total carbon from Elemental analysis [CHNS], and inorganic carbon from [Coulometer]). Each row combines the CHNS and Coulometer data from measurements made on the same sample at the same time for a particular section and section offset (depth). If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate data type (Elemental analysis and Coulometer). If the same sample was measured multiple times by any of the methods, results in the report will be combined on one line where possible. Each additional replicate result will be shown in subsequent rows and will be combined where possible. Report includes results for carbon forms: total, inorganic, calcium carbonate, and organic by difference, along with total hydrogen, nitrogen, and sulfur.
IODP Expedition 360 Magnetic susceptibility (whole round)
Magnetic susceptibility was measured on whole-round sections (and rarely section halves) on the Whole-Round Multisensor Logger (WRMSL) and/or Special Task Multisensor Logger (STMSL) using a Bartington MS2 meter and a 90 mm or 80 mm MS2C loop. As volume of the sample is not controlled for this experiment, susceptibility units are recorded in instrument units and are not volume-corrected.
IODP Expedition 360 RGB channels (calculated from core photos)
Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.
IODP Expedition 360 Piece log
Dataset includes length data for every whole-round piece: bin length, whole-round piece length (measured by curation staff), and both the archive- and working-half piece lengths (optionally measured by scientists).
IODP Expedition 360 Magnetic remanence (SRM-longcore)
Magnetic remanence was measured on section halves (and rarely on whole-round sections) using a 2G Enterprises 760R cryogenic magnetometer, first as natural remanent magnetization (NRM) and then after demagnetization steps were performed on the samples by alternating field (AF) demagnetizer coils mounted in-line within the instrument.
IODP Expedition 360 Core composite images
A digital composite image (PNG) is made for each core comprising core sections scanned using a line-scan camera. The composite layout is equivalent to traditional core table photos. Top left is top of core; color and meter rule references are included.
IODP Expedition 360 Laser height profile (section half)
Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.
IODP Expedition 360 Whole-round core section images
Images of the outside of hard rock whole-round sections were acquired using a linescan imager (Section Half Imaging Logger [SHIL]) and a special holder that allows each 90 degree segment of the outer surface to be positioned properly. The images were taken at a resolution of 20 lines/mm (50 micropixels). JRSO staff take these quadrant images and compile them into a side-by-side rollout photograph of the section. Composite images are available as both JPG and TIF image formats. Individual quadrant images are available as JPG images only through this report; contact the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a> if quadrant TIF files (~160 MB) are needed.
IODP Expedition 360 Inorganic carbon (coulometer)
Inorganic carbon (carbonate) is determined by coulometry, which uses a photodetection cell to measure carbon dioxide evolved during sample acidification. Report includes percent inorganic carbon and calcium carbonate.
IODP Expedition 360 Bulk Density (GRA)
Gamma ray attenuation (GRA) data were acquired using a Cs-137 collimated source and a sodium iodide (thallium), or NaI(Tl), scintillation detector. The signal was calibrated using water and aluminum standards to provide a proxy for bulk density. This measurement was performed by a sensor mounted on either the Whole-Round Multisensor Logger (WRMSL) or the Special Task Multisensor Logger (STMSL); which track was used for a given data set is indicated in the data.
IODP Expedition 360 Magnetic susceptibility (point or contact system)
Magnetic susceptibility was measured on section halves on the Section Half Multisensor Logger (SHMSL) using a Bartington MS2 meter and either a MS2E or MS2K probe. Because all JRSO cores meet minimum size requirements for these two probes, MSPOINT data are corrected for volume and recorded in SI susceptibility units (x10<sup>-5</sup>).
IODP Expedition 360 Section-half images
Digital section images were taken of the flat face of split cores on the Section Half Imaging Logger (SHIL) using a linescan camera at a resolution of 20 lines/mm (50 micron pixels). Cores were imaged as soon as possible after splitting to minimize color changes that occur through oxidation and drying. The SHIL produces TIF files as well as reduced-size JPG files. The TIF files are not kept online but users may request them from the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a>.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.