Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
121
datasets available to search
ShareScore release 0.7.1
Dataset results
121 results for “Scenario Modelling”
Fluxes project at North Temperate Lakes LTER: Hydrology Scenarios Model Output
A spatially-explicit simulation model of hydrologic flow-paths was developed by Matthew C. Van de Bogert and collaborators for his PhD project, " Aquatic ecosystem carbon cycling: From individual lakes to the landscape." The model is coupled with an in-lake carbon model and simulates hydrologic flow paths in groundwater, wetlands, lakes, uplands, and streams. The goal of this modeling effort was to compare aquatic carbon cycling in two climate scenarios for the North Highlands Lake District (NHLD) of northern Wisconsin: one based on the current climate and the other based on a scenario with warmer winters where lakes and uplands do not freeze, hereinafter referred to as the "no freeze" scenario. In modeling this "no freeze" scenario the same precipitation and temperature data as the current climate model was used, however temperature inputs were artificially floored at 0 degrees Celsius. While not discussed in his dissertation, Van de Bogert considered two other climate scenarios each using the same precipitation and temperature data as the current climate scenario. These scenarios involved running the model after artificially raising and lowering the current temperature data by 10 degrees Celsius. Thus, four scenarios were considered in this modeling effort, the current climate scenario, the "no freeze" scenario, the +10 degrees scenario, and the -10 degrees scenario. These data are the outputs of the model under the different scenarios and include average monthly temperature, average monthly rainfall, average monthly snowfall, total monthly precipitation, daily evapotranspiration, daily surface runoff, daily groundwater recharge, and daily total runoff. Note that the results of how temperature inputs influence aquatic carbon cycling under these different scenarios is not included in this data set, refer to Van de Bogert (2011) for this information.Documentation: Van de Bogert, M.C., 2011. Aquatic ecosystem carbon cycling: From individual lakes to the landscape. Pr
Long-term heat demand scenarios under climate change utilising a stochastic dynamic building stock model: Morphed hourly outdoor temperatures for Jyvaskyla for 2030 and 2050
<p>******************* Please view the README.txt or README.md file for detailed documentation of data. ********************</p> <p>Title: Long-term heat demand scenarios under climate change utilising a stochastic dynamic building stock model: Morphed hourly outdoor temperatures for Jyväskylä for 2030 and 2050</p> <p>Date of release: 25/11/2020</p> <p>Identifier: 10.5281/zenodo.4275759</p> <p>Permalink: http://dx.doi.org/10.5281/zenodo.4275759</p> <p>Associated publication: Hietaharju, P.; Louis, J.-N.; Pulkkinen, J.; Ruusunen, M. Long-term heat demand scenarios under climate change utilising a stochastic dynamic building stock model, <strong><em>Under Review</em></strong>, 2020.</p> <p>Suggested citation: Please reference the associated publication above when using any datasets or materials described in the README.txt and README.md files.</p> <p><br> Contact information: Jari Pulkkinen, University of Oulu, Oulu, Finland, jari.pulkkinen@oulu.fi; Jean-Nicolas Louis, University of Oulu, Oulu, Finland, jean-nicolas.louis@oulu.fi<br> </p> <p>Dates of data: 2030, 2050</p> <p>Type of data: Outdoor Temperature</p> <p>Geographic location: Jyväskylä</p> <p>Time resolution: hourly, full year</p> <p>Format: All data is stored in .csv files</p> <p>Number of files: 1 .zip --> 50 files + README.txt + README.md</p> <p>This directory contains the following datasets: A summary of all the files has been compiled and stored in the "README.txt" and "README.md" files</p> <p> </p> <p>Notifications:</p> <p>Contains modified Copernicus Climate Change Service (C3S) information [2018] and modified Finnish Meteorological Institute [2017,2019] information from etsin.fairdata.fi and from Open data repository (https://en.ilmatieteenlaitos.fi/open-data).</p> <p><br> Contains modified Climate One Building information [2019] (reference Lawrie L.K. and Crawley D.B. 2019) and Test Reference Year 2012 (TRY2012) information from Jylhä et al. [2011] and Jylhä et al. [2015] (Energy demand for the heating and cooling of residential houses in Finland in a changing climate).</p> <p>Contains modified Ruosteenoja et al. [2016] information.</p> <p>Other data and information sources are described in README.txt, README.md, references and on the associated publication.</p>
Graph Data: Hydrological impact of widespread afforestation in Great Britain using a large ensemble of modelled scenarios
<p>Data used for creating the figures in the paper: Hydrological impact of widespread afforestation in Great Britain using a large ensemble of modelled scenarios.</p> <p>It contains the flow exceedances (as mm day<sup>-1</sup>), flow duration slope, median elasticity and runoff ratio for the different afforestation scenarios. Also included is the information on the changes of broadleaf afforestation. </p> <p>If you have any questions, please email marcus.buechel@ouce.ox.ac.uk.</p>
Modelling pan-Arctic peatland carbon dynamics under alternative warming scenarios
<p>The purpose of this study is to simulate peatland carbon dynamics in the future climate conditions for four major future warming scenarios. The study examines whether less pronounced warming could further enhance the peatland carbon sink capacity and buffer the effects of climate change. It will also determine which trajectory peatland carbon balance will follow, what the main drivers are and which one will dominate in the future.</p> <p>In this study, LPJGUESS Peatland has been employed across the pan-Arctic and we carried out four sets of simulations. The data files contain the information about carbon accumulation, NEE, NPP and ice fraction.</p>
Review of existing modelling studies focusing on specific soil-based ecosystem services (SES) and threats (ST) including climate change, management and land use change scenarios.
<p><span>We </span><span>reviewed existing modelling studies focusing on soil ecosystem services (SES) and soil threats (ST) including climate change, land use change and management scenarios. A publication has been submitted and is currently being reviewed. The title of the manuscript is: </span><span>Assessing and mapping soil ecosystem services and soil threats changes in agroecosystems through scenario-based approaches – a systematic review. </span></p> <p><span>Work was split between various authors. All Co-authors were working on either one or more SES or one ST. Excel sheets were prepared by INRA and BFW to ensure the comparability of results that members extracted from the papers found. Literature search was done in Scopus and Web of Science. The final list of related publications is reported here. <br></span></p>
Data for Marine Ecological Niche Models, for 2019 and across RCP 2.6, 4.5, and 8.5 scenarios in 2050 and 2100: Global-scale Environmental parameters at 0.1° and 0.5° resolutions, Presence and Absence Records of 1508 European-seas Species
<p>Data for Ecological Niche Models: Global-scale Environmental parameters at 0.1° and 0.5° resolutions, Presence and Absence Records of 1508 European-seas Species.</p>
Ecological Niche Models, in 2019 and across RCP 2.6, 4.5, and 8.5 scenarios in 2050 and 2100, of 1508 European Marine Species, developed with Artificial Neural Networks, Maximum Entropy, Support Vector Machines, and AquaMaps at 0.5° Resolution
<p>Native ecological niche models of 1508 European species (894 fish and 614 non fish) developed with AquaMaps, Artificial Neural Networks, Maximum Entropy, and Support Vector Machines, for 2019 and under RCP 2.6, 4.5, and 8.5 scenarios in 2050 and 2100, at 0.5° spatial resolution.</p>
Dataset for "Best organic farming deployment scenarios for pest control: a modeling approach" V3
<p>Organic Farming (OF) has been expanding recently in response to growing consumer demand and as a response to environmental concerns. The area under OF is expected to further increase in the future. The effect of OF expansion on pest densities in organic and conventional crops remains difficult to predict because OF expansion impacts Conservation Biological Control (CBC), which depends on the surrounding landscape context. In order to understand and forecast how pests and their biological control may vary during OF expansion, we modeled the effect of spatial changes in farming practices on population dynamics of a pest and its natural enemy. We investigated the impact on pest density and on predator to pest ratio of three contrasted scenarios aiming at 50% organic fields through the progressive conversion of conventional fields. Scenarios were 1) conversion of Isolated conventional fields first (IP), 2) conversion of conventional fields within Groups of conventional fields first (GP), and 3) Random conversion of conventional field (RD). We coupled a neutral spatially explicit landscape model to a predator-prey model to simulate pest dynamics in interaction with natural enemy predators. The three OF expansion scenarios were applied to nine landscape types differing in their proportion and fragmentation of semi-natural habitat. We further investigated if the ranking of scenarios was robust to pest control methods in OF fields and pest and predator dispersal abilities.</p> <p>We found that organic farming expansion affected more predator densities than pest densities for most landscape types. The impact of OF expansion on final pest and predator densities was also stronger in organic than conventional fields and in landscapes with large proportions of highly fragmented semi-natural habitats. Based on pest densities and the predator to pest ratio, our results suggest that a progressive organic conversion with a focus on isolated conventional fields (scenario IP) could help promote CBC. Careful landscape planning of OF expansion appeared most necessary when pest management was substantially less efficient in organic than in conventional crops, and in landscapes with low proportion of semi-natural habitats.</p> <p><strong>This dataset contains simulation outputs and the R script that was used to describe, display and analyse data. The model itself can be found at <a href="https://doi.org/10.17605/OSF.IO/Z2QCX">https://doi.org/10.17605/OSF.IO/Z2QCX</a></strong></p> <p><strong>Please note that this is the third version of this dataset, following recommendations from the PCI Ecology reviewers and editor.</strong></p>
Biodiversity Index, in 2019 and across RCP 4.5, and 8.5 scenarios in 2050 and 2100 of 1508 European Marine Species based on ensemble Ecological Niche Models developed with Artificial Neural Networks, Maximum Entropy, Support Vector Machines, and AquaMaps at 0.5° Resolution
<p>Biodiversity Index in 2019 and across RCP 4.5, and 8.5 scenarios in 2050 and 2100 of 1508 European marine species based on ensemble Ecological Niche Models developed with Artificial Neural Networks, Maximum Entropy, Support Vector Machines, and AquaMaps at 0.5° Resolution. The Index counts the number of species (among the 1508) potentially present in each 0.5° cell according to the ensemble models. For each ensemble model, a threshold of at least 3 models agreeing on species presence in the cell was used to indicate species presence.</p>
QuantMig microsimulation population projection model and migration scenarios for 31 European countries
<p>This open data deposit contains the data and model code of QuantMig-Mic microsimulation population projection model for 31 European countries and accompanies deliverables D8.3: Model outputs for dissemination and D8.1: Microsimulation projection model.</p> <p>This Zenodo deposit contains datasets of model input (baseline population and immigration database) and output data (demography and components output tables) and model code with parameters of the Baseline scenario (termed Default in the model code) deposited in QuantMig_mic.zip file. To view the code the users must first install MODGEN software (or can view code files in Visual Studio). All scenarios share the same parameters except the immigrant population - to change the immigration assumptions the users can import immigration assumptions for any other scenario from the ImmigDataBase.csv and change it in the immigration module using the MODGEN user interface or using Visual Studio.</p> <p><strong>The file structure and codebook for the data files is included in the cover note file "readme_quantmig_datasets.pdf"</strong></p> <p>Detailed <strong>information about the QuantMig-Mic microsimulation model, its modules and parameters</strong>:</p> <p>Marois, G., Potančoková, M., González-Leonardo, M. (2023) QuantMig-Mic microsimulation population projection model. QuantMig Project Deliverable D8.2. International Institute for Applied Systems Analysis (IIASA), Austria. Available at:http://quantmig.eu/res/files/QuantMig_IIASA_Deliverable%20D8.2_forsubmission_21-07-2023_corr.pdf</p> <p>Instructions how to install MODGEN can be found in:</p> <p>Marois, G. and Potančoková, M. (2022) QuantMig-mic microsimulation tool. QuantMig Project Deliverable D8.1. International Institute for Applied Systems Analysis (IIASA). http://quantmig.eu/res/files/QuantMig_IIASA_Deliverable%20D8.1%20v1.1.pdf </p> <p>Detailed <strong>information about the QuantMig migration scenarios</strong> can be found in:</p> <p>Marois, G., Potančoková, M., González-Leonardo, M. (2023) QuantMig-Mic microsimulation population projection model. QuantMig Project Deliverable D8.2. International Institute for Applied Systems Analysis (IIASA), Austria. Available at:http://quantmig.eu/res/files/QuantMig_IIASA_Deliverable%20D8.2_forsubmission_21-07-2023_corr.pdf</p> <p>A <strong>guide to the datasets</strong> and the codebook can be found in: <strong>readme_quantmig_datasets.pdf</strong></p> <p><strong>Countries included in the model: </strong></p> <p>Austria, Belgium, Bulgaria, Croatia, Czechia, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom</p> <p> </p>
Compiled database, code and raw data for the article "A Comprehensive Database of Leaf Temperature, Water, and CO2 Fluxes in Young Oil Palm Plants Across Diverse Climate Scenarios for the Evaluation of Functional-Structural Models"
<p>This dataset results from an experiment on young oil palm plants (<em>Elaeis guineensis</em>) in the Ecotron facility from CNRS in Montpellier. Four plants were put in a microcosm one by one with varying climatic conditions to investigate the effect of climate on leaf temperature, CO2, and H2O fluxes at the plant scale. The conditions were defined based on typical daily conditions from a location where it is grown (Libo, Indonesia), <em>i.e.</em>, a day with no rainfall and near-average air temperature and humidity. This base condition was then modified by adding more CO2 (400, 600 and 800ppm), less radiation (typical cloudy sky), and more or less temperature and vapour pressure deficit (± 30%).</p> <p>Find more details from the <code>README.md</code> file in the repository or from the associated <a href="https://github.com/PalmStudio/Biophysics_database_palm" target="_blank" rel="noopener">Github repository</a>.</p>
A Practical Tool-Chain for the Development of Coordination Scenarios - Graphical Modeler, DSL, Code Generators and Automaton-Based Simulator
<p>The Peer Model is a modeling tool for coordination based on blackboard-based collaboration. </p> <p>The tool-chain consists of a modeler, translator and simulator.</p> <p>Its goal is to help developers of distributed and concurrent coordination software better understand algorithms and identify deficiencies from the beginning.</p> <p><br> </p>
HydroGeoSphere Model Input Files and Results for Validation of Pesticide Leaching to Groundwater for Nine EU FOCUS Scenarios
<p>This dataset includes HydroGeoSphere (HGS) model (Aquanty, 2024) input and output files for nine Forum for the Co-ordination of Pesticide Models and their Use (FOCUS) scenarios (EC, 2014) for simulation of leaching of four test contaminants to groundwater. It is recommended that users are familiar with HGS software in order to best make use of the available files. Scenarios are included in separate subfolders named using the first four letters of the FOCUS scenario location name, e.g. folder "chat" contains the model run for the "Chateaudun" scenario. It is recommended that users familiarize themselves with the (EC, 2014) groundwater scenarios. HGS model inputs are specified in the *.grok ASCII text file for each scenario in each subfolder. Soil material properties and evapotranspiration properties are included in HGS input files in ASCII text format in the "material_properties" subfolder. Solute application timing for each scenario are include in the "solute_app" subfolder. And climate times series inputs are included in the "weather" subfolder.</p>
3D geological models of dolomitized clinoforms and flow simulation results: scenario 2 in Teoh, C.P. et al (2021)
<p>3D geological models of dolomitized clinoforms (10 different realisations) and flow simulation results according to Scenario 2 in Teoh, C.P. et al (2021) doi:<a href="http://doi.org/10.1016/j.marpetgeo.2021.105344">10.1016/j.marpetgeo.2021.105344</a>.<br> Models are built using surface-based modelling approach (doi:<a href="https://doi.org/10.1007/s11004-018-9764-8">10.1007/s11004-018-9764-8</a>). Flow simulations are run with IC-FERST, using unstructured tetrahedral meshes that adapt to geological heterogeneity and flow behaviour throughout the simulation to improve simulation quality and performance.</p> <p>For each of the 10 stochastic realisations, 5 geological models are available with corresponding flow simulation results:<br> - Only clinoforms and facies boundaries<br> - 1 dolomite body per clinothem (~20% dolomite)<br> - 2 dolomite bodies per clinothem (~40% dolomite)<br> - 3 dolomite bodies per clinothem (~60% dolomite)<br> - 4 dolomite bodies per clinothem (~80% dolomite)<br> <br> Input model files for simulation are provided in Exodus (.e) and GMSH (.msh) formats.<br> Flow simulation settings are provided for IC-FERST in .mpml files (<a href="http://multifluids.github.io/">multifluids.github.io</a>)<br> Flow simulation results are provided as:</p> <ul> <li> 3D unstructured adaptive mesh in .vtu format, which can be opened with Paraview (www.paraview.org). Time interval between successive mesh outputs is 1 month.</li> <li> In- and outflow rates and volumetric proportions per phase in .csv</li> </ul> <p>Naming of files and folders:<br> <em>Sxxxxxx_yyyyz</em> where:<br> '<em>xxxxxx</em>' is the stochastic seed number used to sample the input statistics and create the geological model<br> '<em>yyyy</em>' is either 'clino' or 'dolo' to indicate if the model represents respectively only clinoforms, or contains dolomite bodies <br> '<em>z</em>' corresponds to the number of dolomite bodies per clinothem</p>
3D geological models of dolomitized clinoforms and flow simulation results: scenario 1 in Teoh, C.P. et al (2021)
<p>3D geological models of dolomitized clinoforms (10 different realisations) and flow simulation results according to Scenario 1 in Teoh, C.P. et al (2021) doi:<a href="http://doi.org/10.1016/j.marpetgeo.2021.105344">10.1016/j.marpetgeo.2021.105344</a>.<br> Models are built using surface-based modelling approach (doi:<a href="https://doi.org/10.1007/s11004-018-9764-8">10.1007/s11004-018-9764-8</a>). Flow simulations are run with IC-FERST, using unstructured tetrahedral meshes that adapt to geological heterogeneity and flow behaviour throughout the simulation to improve simulation quality and performance.</p> <p>For each of the 10 stochastic realisations, 5 geological models are available with corresponding flow simulation results:<br> - Only clinoforms and facies boundaries<br> - 1 dolomite body per clinothem (~20% dolomite)<br> - 2 dolomite bodies per clinothem (~40% dolomite)<br> - 3 dolomite bodies per clinothem (~60% dolomite)<br> - 4 dolomite bodies per clinothem (~80% dolomite)<br> <br> Input model files for simulation are provided in Exodus (.e) and GMSH (.msh) formats.<br> Flow simulation settings are provided for IC-FERST in .mpml files (<a href="http://multifluids.github.io/">multifluids.github.io</a>)<br> Flow simulation results are provided as:</p> <ul> <li> 3D unstructured adaptive mesh in .vtu format, which can be opened with Paraview (www.paraview.org). Time interval between successive mesh outputs is 1 month.</li> <li> In- and outflow rates and volumetric proportions per phase in .csv</li> </ul> <p>Naming of files and folders:<br> <em>Sxxxxxx_yyyyz</em> where:<br> '<em>xxxxxx</em>' is the stochastic seed number used to sample the input statistics and create the geological model<br> '<em>yyyy</em>' is either 'clino' or 'dolo' to indicate if the model represents respectively only clinoforms, or contains dolomite bodies <br> '<em>z</em>' corresponds to the number of dolomite bodies per clinothem</p>
Modelling of inundation scenario under defended hypothesis for RP100 years in Rimini (2050)
<p>This video shows the output of ANUGA hydrodynamic model simulating the total water level generated by a synthetic storm surge scenario corresponding to RP 100 years in Rimini. The period considered is 2050, that means the simulation accounts for changes in Mean Sea Level due to Sea Level Rise and vertical land movements.</p> <p>ANUGA is a 2D hydrodynamic model suitable for the simulation of flooding events resulting from riverine peak flows and storm surges. Being a 2D hydrodynamic model, ANUGA does not resolve vertical convection, waves breaking or 3D turbulence (e.g. vorticity), thus it not accounting for the swash component of wave runup. The fluid dynamics in ANUGA is based on a finite-volume method for solving the shallow water wave equations, thus being based on continuity and simplified momentum equation.<br> The case study area is represented by an irregular triangular mesh in which water level, water depth and horizontal momentum are computed. The size of the triangles is variable within the mesh, varying from higher resolution areas (16 m²) for canals and coastal defence structures, to lower resolution (900 m²) for sea areas.</p>
Model run and scenario data for study "Bioenergy-induced land-use change emissions with sectorally fragmented policies"
<p>This data archive contains model runs and data analysis files to the research article</p> <p><strong>Bioenergy-induced land-use change emissions with sectorally fragmented policies</strong></p> <p>by <em>Leon Merfort, Nico Bauer, Florian Humpenöder, David Klein, Jessica Strefler, Alexander Popp, Gunnar Luderer, Elmar Kriegler</em></p> <p>published in <em>Nature Climate Change </em>(2023).</p> <p><em><strong>ModelRuns_remind </strong></em>(directory) contains all REMIND model runs of the scenarios underlying the paper.</p> <p><em><strong>ModelRuns_magpie </strong></em>(directory) contains all MAgPIE model runs of the scenarios underlying the paper.</p> <p><em><strong>DataAnalysis </strong></em>(directory) contains an RStudio Project that was used for the data analysis and the generation of the figures of the paper. It additionally contains all figures and figure data that are shown in the paper.</p> <p><em><strong>ScenarioMapping.pdf</strong></em> contains the mapping from scenario names used in the paper to the model experiment names (in the model run directories).</p>
FESOM-REcoM model data: A regime shift on Weddell Sea continental shelves with local and remote physical-biogeochemical implications is avoidable in a 2°C scenario
<p>This data set includes the minimal data necessary to reproduce the findings of Nissen et al. (2023). Output of model simulations with the global ocean biogeochemical model FESOM1.4-REcoM2 is provided. In particular, besides information on the model grid, the data set includes annual mean water mass properties (temperature, salinity, density, oxygen, pH) and freshwater fluxes from sea ice and ice shelves and decadal averages of air-sea CO2 fluxes and deep-ocean carbon accumulation rates. Model results are provided from 1980-2100 for the four emission scenarios SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5 (sorted from low emission to high emission).</p> <p>Please see README for more information on the individual files. </p> <p>Data set belongs to: </p> <p>Nissen, C., R. Timmermann, M. Hoppema, and J. Hauck, 2023: A regime shift on Weddell Sea continental shelves with local and remote physical-biogeochemical implications is avoidable in a 2°C scenario. <em>J. Climate</em>, <a href="https://doi.org/10.1175/JCLI-D-22-0926.1">https://doi.org/10.1175/JCLI-D-22-0926.1</a>, in press.</p>
Analyzing the sensitivity of a flood risk assessment model towards its input data, twelve damage scenarios
<p>This dataset contains the output shapefiles of twelve different risk assessment scenarios for the case study of Annotto Bay, Jamaica. These assessments were performed in the context of the research 'Analyzing the sensitivity of a flood risk assessment model towards its input data', published in the journal Natural Hazards and Earth System Sciences. More information on the input data and methodology can be found in this paper.</p>
Code and data for publication "Assessing carbon cycle projections from complex and simple models under SSP scenarios" published in "Climatic Change"
<p>Data and scripts for the article "Assessing carbon cycle projections from complex and simple models under SSP scenarios" by I. Melnikova, P. Ciais, O. Boucher and K. Tanaka was accepted for publication in Climatic Change (https://doi.org/10.1007/s10584-023-03639-5)</p><p> </p><p>We use bash, CDO, and python.</p><p>SSP2.xlsx contains preprocessed annual estimates of climate and carbon cycle variables from ESMs and SCMs used in the paper.</p><p>Two bash scripts contain preprocessing cdo commands for ESM output.s SCMs were preprocessed directly in python.</p><p>Jupyter notebook (python) contains preprocessing of data and plotting of all figures of the manuscript. The folder "additional" contains some more Excel files needed to run Jupyter-Notebook. Please adapt the folder names.</p><p>If you have any questions, please contact the corresponding author Irina MELNIKOVA at melnikova . irina@nies.go.jp</p><p> </p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.