Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
477
datasets available to search
ShareScore release 0.9.0
Dataset results
477 results for “input data”
Soil water content measurements and rainfall data for plots with experimentally altered precipitation and nutrient inputs at the Jornada Basin LTER site, 2011-ongoing
This dataset contains soil volumetric water content data collected starting in 2011 for a long-term precipitation and nutrient manipulation experiment at the Jornada Basin LTER site in southern New Mexico, U.S.A. This experiment uses precipitation shelters and irrigation treatments to manipulate water inputs, and fertilization treatments to alter nitrogen input to 2.5 x 2.5 meter plots in a desert grassland. Soil sensors are installed at surface and deep soil layers in each plot and collect hourly averages of volumetric water content using a time-domain reflectometry method. This dataset contains daily averages. This is an ongoing study and the dataset will be updated yearly.
Input data for MFAssignR Galaxy workflow tutorial
<p>This is the input dataset for the MFAssignR Galaxy training workflow. The input dataset corresponds to the model data of MFAssignR (<a title="Raw_Neg_ML" href="https://github.com/skschum/MFAssignR/tree/master/MFAssignR/data" target="_blank" rel="noopener">Raw_Neg_ML</a>), containing a raw mass list, measured in a negative ESI mode.</p>
MCSE Model input data at the Kellogg Biological Station, Hickory Corners, MI (1988 to 2020)
Dataset AbstractConsolidated dataset for the ARDEN crop modeling effort. This pulls together several useful data tables into one dataset. Further information can be found at https://agmip.github.io/ARDN/original data source http://lter.kbs.msu.edu/datasets/195
Input Runoff Data for RAPID Model Pre-Processor (RRR) from ECMWF ERA-Interim/Land
<p>This database can be used as the input runoff files in the RAPID model [<em>David et al.,</em> 2011] pre-processor (RRR). The runoff files were acquired/derived from the ECMWF ERA-Interim/Land [<em>Balsamo et al.,</em> 2015] outputs, available from ECMWF Data Server. The ERA-Interim/Land outputs are available in daily temporal resolution. The database contains the following files;</p> <p> ECMWF_Interim_Land_<strong><em>yyyy</em></strong>.tar.gz (Note: <strong><em>yyyy</em></strong> = 2000 to 2009)</p> <p> </p> <p>Note: These runoff data were used by <em>Sikder et al.</em> [2019] to assess the performance of available global LSM runoffs in South and Southeast Asian river basins.</p> <p> </p> <p>Other necessary links associated with this database:</p> <p>RAPID model: <a href="https://github.com/c-h-david/rapid">https://github.com/c-h-david/rapid</a></p> <p>RAPID model pre-processor (rrr): <a href="https://github.com/c-h-david/rrr">https://github.com/c-h-david/rrr</a></p> <p>ECMWF outputs: <a href="https://www.ecmwf.int/en/forecasts/datasets/reanalysis-datasets/era-interim-land">https://www.ecmwf.int/en/forecasts/datasets/reanalysis-datasets/era-interim-land</a></p> <p> </p> <p>References:</p> <p>Balsamo, G., Albergel, C., Beljaars, A., Boussetta, S., Brun, E., Cloke, H., et al. [2015], ERA-Interim/Land: a global land surface reanalysis data set, Hydrol. Earth Syst. Sci., 19, 389–407, <a href="https://doi.org/10.5194/hess-19-389-2015">https://doi.org/10.5194/hess-19-389-2015</a></p> <p>David, C. H., D. R. Maidment, G. Y. Niu, Z. L. Yang, F. Habets, and V. Eijkhout [2011], River network routing on the NHDPlus dataset, J. Hydrometeorol., 12, 913–934, <a href="https://doi.org/10.1175/2011JHM1345.1">https://doi.org/10.1175/2011JHM1345.1</a></p> <p>Sikder, M. S., C. H. David, G. H. Allen, X. Qiao, E. J. Nelson, and M. A. Matin [2019], Evaluation of Available Global Runoff Datasets Through a River Model in Support of Transboundary Water Management in South and Southeast Asia, Front. Environ. Sci., 7:171, <a href="https://doi.org/10.3389/fenvs.2019.00171">https://doi.org/10.3389/fenvs.2019.00171</a></p>
Input data and results of the RECC-ODYM model for Greater Oslo study (v1.0)
<p>This repository contains the input data and results of the modified RECC-ODYM model for Greater Oslo study (v1.0) used in "Reducing material use and their greenhouse gas emissions in Greater Oslo" by Lola Rousseau, Jan Sandstad Næss, Fabio Carrer, Sara Amini, Helge Brattebø, and Edgar Hertwich.</p> <p>The publication and its supplementary information are available at: <a href="https://doi.org/10.1111/jiec.13611">https://doi.org/10.1111/jiec.13611</a></p> <p>The following data are included in this repository:</p> <ul> <li>A description (<strong>How_to_use_RECCODYM_Greater_Oslo.pdf</strong>) how to run the code with the database to generate the results </li> <li>The database (<strong>CURRENT_VN1_0.zip</strong>) with the parameters, the master classification file RECC_Classifications_Master_V2.0.xlsx, the model config file RECC_Config.xlsx and the list of scenario configurations RECC_ModelConfig_List.xlsx</li> <li>The results organized (<strong>results_organized.zip</strong>) by folder depending on the model run (results_organized) </li> </ul> <p>The code used with this database and generating these results is archived as v1.0 (<a href="https://github.com/LolaRousseau/RECC-ODYM/releases" target="_blank" rel="noopener">https://github.com/LolaRousseau/RECC-ODYM/releases</a>). The latest version is available on GitHub: <a href="https://github.com/LolaRousseau/RECC-ODYM" target="_blank" rel="noopener">https://github.com/LolaRousseau/RECC-ODYM</a></p> <div> <p>Please note that this is a modified version of RECC-ODYM with changes made for this study specifically. More general information about RECC-ODYM can be found on: <a href="https://www.industrialecology.uni-freiburg.de/odym-recc">https://www.industrialecology.uni-freiburg.de/odym-recc</a> and the original framework is also described here: <a href="https://doi.org/10.1111/jiec.13023">https://doi.org/10.1111/jiec.13023</a></p> </div>
Preindustrial Control (PIC) Run for OSU-UVic2.9.10 (MOBI2.2) Input Data
<p>Input data required for a simulation of the preindustrial control (PIC) simulation with the OSU version of the University of Victoria climate model (version 2.9) with the Model of Ocean Biogeochemistry and Isotopes (MOBI2.2).</p>
Last Glacial Maximum (LGM) Run for UVic2.9.10 (MOBI2.2) Input Data
<p>Input data required for a simulation of the Last Glacial Maximum (LGM) simulation with the OSU version of the University of Victoria climate model (version 2.9.10) with the Model of Ocean Biogeochemistry and Isotopes (MOBI2.2).</p>
Supplementary input data for accounting for component condition and preventive retirement in power system reliability of supply analyses
<div> <div>This data set contains supplementary data used for case studies on accounting for transformer condition in reliability of supply analyses in the following manuscripts: <br>1) H. Toftaker, J. Foros, I. B. Sperstad, "Accounting for component condition and preventive retirement in power system reliability of supply analyses", IET Generation, Transmission & Distribution, vol. 5, no. 1, 2023, DOI: 10.1049/gtd2.12761. <br>2) I. Bjerkebæk, I. B. Sperstad, H. Toftaker, G. Kjølle, "Simulating the Long Term Effect of Asset Management Strategies on Reliability of Supply", pre-print submitted for peer review, 2024. DOI: 10.36227/techrxiv.172107759.95745501/v1.</div> <div> See README.md for details.</div> </div>
Input data to replicate "The social cost of tropical cyclones"
<p>Input data for the <a href="https://dx.doi.org/10.5281/zenodo.8056520">scripts</a> that replicate the results of <a href="https://doi.org/10.1038/s41467-023-43114-4">Krichene et al. 2023</a>.</p> <p>To run the <a href="https://dx.doi.org/10.5281/zenodo.8056520">scripts</a>, the following files from this repository need to be placed in the <code>./data/input/</code> subdirectory of the project folder containing the <a href="https://dx.doi.org/10.5281/zenodo.8056520">scripts</a>:</p> <ul> <li><code>GMT.nc</code>: Global mean temperature time series as used by the <a href="https://gitlab.pik-potsdam.de/tovogt/tc_emulator">tropical cyclone emulator</a>.</li> <li><code>GrowthClimateDataset.dta</code>: The <a href="https://purl.stanford.edu/wb587wt4560">input data</a> of <a href="https://dx.doi.org/10.1038/nature15725">Burke et al. 2015</a>.</li> <li><code>IHME_GLOBAL_GDP_ESTIMATES_1950_2015.csv</code>: Historical GDP per capita data from <a href="https://doi.org/10.1186/1478-7954-10-12">James et al. 2012</a> (downloaded from <a href="https://ghdx.healthdata.org/record/ihme-data/gross-domestic-product-gdp-estimates-country-1950-2015">IHME</a>).</li> <li><code>mean_temperature_gswp3-w5e5.csv</code>: Population-weighted average national temperature time series for the historical period.</li> <li><code>pulse_response_ricke_caldeira_2014.csv</code>: The global mean temperature response of an additional emission pulse according to <a href="https://dx.doi.org/10.1088/1748-9326/9/12/124002">Ricke & Caldeira 2014</a>.</li> <li><code>tcdata/TCE-DAT_historic-exposure_1950-2015.csv</code> and <code>tcdata/TotalPopulation.csv</code>: Historical (national) numbers of people affected by tropical cyclones according to <a href="https://doi.org/10.5880/pik.2017.011">TCE-DAT</a> with the corresponding total population counts.</li> <li><code>tcdata/emulator/</code>: Projected (national) shares of people affected by tropical cyclones according to the <a href="https://gitlab.pik-potsdam.de/tc_cost/tc_emulator">tropical cyclone emulator</a> as computed by the scripts in the <a href="https://gitlab.pik-potsdam.de/tc_cost/tc_people_affected">corresponding repository</a>.</li> <li><code>wid_all_data.zip</code>: A bulk data set from the <a href="https://wid.world/bulk_download/wid_all_data.zip">World Inequality Database</a>.</li> </ul> <p>For more information, see <a href="https://doi.org/10.1038/s41467-023-43114-4">Krichene et al. 2023</a> and the README file provided with the <a href="https://dx.doi.org/10.5281/zenodo.8056520">scripts</a>.</p>
Caribou-Poker Creeks Research Watershed: Input data for calculating stream metabolism from 2021-2022
This dataset contains the input data needed for calculating stream metabolism using the 'streamMetabolizer' R package (i.e., dissolved oxygen, oxygen at 100% saturation, depth, water temperature, light, and discharge) for four sites in the Caribou-Poker Creeks Research Watershed (CPCRW). Data are reported at 15-minute intervals from May to September in 2021 and 2022.
Input Runoff Data for RAPID Model Pre-Processor (RRR) from GLDAS-v.2.0
<p>This database can be used as the input runoff files in the RAPID model [<em>David et al.,</em> 2011] pre-processor (RRR). The runoff files were acquired/derived from the GLDAS-v.2.0 [<em>Rodell et al.,</em> 2004] LSM outputs, available at;</p> <p><a href="http://hydro1.gesdisc.eosdis.nasa.gov/daac-bin/OTF/HTTP_services.cgi">http://hydro1.gesdisc.eosdis.nasa.gov/daac-bin/OTF/HTTP_services.cgi</a></p> <p>The GLDAS-v.2.0 outputs (from NOAH Land Surface Models) are available in 1º, 0.25º with 3-hour temporal resolution. The database contains the following files;</p> <p> GLDAS.2.0_NOAH<em><strong>res</strong></em>_3H_<em><strong>yyyy</strong></em>.tar.gz (Note: <em><strong>res</strong></em> = 10 or 025; <em><strong>yyyy</strong></em> = 2000 to 2009)</p> <p> </p> <p>Note: These runoff data were used by <em>Sikder et al.</em> [2019] to assess the performance of available global LSM runoffs in South and Southeast Asian river basins.</p> <p> </p> <p>Other necessary links associated with this database:</p> <p>RAPID model: <a href="https://github.com/c-h-david/rapid">https://github.com/c-h-david/rapid</a></p> <p>RAPID model pre-processor (rrr): <a href="https://github.com/c-h-david/rrr">https://github.com/c-h-david/rrr</a></p> <p>GLDAS outputs: <a href="https://disc.gsfc.nasa.gov/datasets?keywords=GLDAS">https://disc.gsfc.nasa.gov/datasets?keywords=GLDAS</a></p> <p> </p> <p>References:</p> <p>David, C. H., D. R. Maidment, G. Y. Niu, Z. L. Yang, F. Habets, and V. Eijkhout [2011], River network routing on the NHDPlus dataset, J. Hydrometeorol., 12, 913–934, <a href="https://doi.org/10.1175/2011JHM1345.1">https://doi.org/10.1175/2011JHM1345.1</a></p> <p>Rodell, M., P. R. Houser, U. Jambor, J. Gottschalck, K. Mitchell, C.-J. Meng, et al. [2004], The global land data assimilation system, Bull. Am. Meteorol. Soc. 85, 381–394, <a href="https://doi.org/10.1175/BAMS-85-3-381">https://doi.org/10.1175/BAMS-85-3-381</a></p> <p>Sikder, M. S., C. H. David, G. H. Allen, X. Qiao, E. J. Nelson, and M. A. Matin [2019], Evaluation of Available Global Runoff Datasets Through a River Model in Support of Transboundary Water Management in South and Southeast Asia, Front. Environ. Sci., 7:171, <a href="https://doi.org/10.3389/fenvs.2019.00171">https://doi.org/10.3389/fenvs.2019.00171</a></p>
Data set for "Cell-type-specific nicotinic input disinhibits mouse barrel cortex during active sensing"
<p>Data set for: Gasselin C, Hohl B, Vernet A, Crochet C, Petersen CCH (2021) Cell-type-specific nicotinic input disinhibits mouse barrel cortex during active sensing. Neuron doi: 10.1016/j.neuron.2020.12.018</p> <p>There are 2 files in this upload:</p> <p>1. The file named "2021_Gasselin_Neuron.pdf" is the Open Access pdf of the online publication in Neuron.</p> <p>2. The file named "Gasselin_data_code.zip" (~9 GB) is a zipped version of a folder "Gasselin_data_code" (~13 GB), which contains the data analysed in the study along with the Matlab code used to generate the published figures. To access the data and the code, first unzip the file. Then add the folder with subfolders to the Matlab path and run the different codes. The current folder must be the main folder (‘Gasselin_data_code’). Each code computes and plots the results used in the corresponding figure. Figures and Tables are saved in the subfolder ‘Figures’.</p> <p>The subfolder ‘Functions’ contains functions called by the main codes.</p> <p>The main folder contains the following codes:</p> <p><em>Gasselin_Figure1: computes and plots the results for the panels D, E and F of figure 1.</em></p> <p><em>Gasselin_Figure2: computes and plots the results for the panels B and C of figure 2.</em></p> <p><em>Gasselin_Figure3: computes and plots the results for the panels B, C and D of figure 3.</em></p> <p><em>Gasselin_Figure4: computes and plots the results for the panels A, B and C of figure 4.</em></p> <p><em>Gasselin_FigureS1: computes and plots the results for the panels A, B and C of figure S1.</em></p> <p><em>Gasselin_FigureS2: computes and plots the results for the panels A and B of figure S2.</em></p> <p> </p> <p>The subfolder ‘Data’ contains the data structures used for the different figures:</p> <p><em>data_figure1.mat</em></p> <p><em>data_figure2.mat</em></p> <p><em>data_figure3.mat</em></p> <p><em>data_figure4_MECA.mat</em></p> <p><em>data_figure4_Activation.mat</em></p> <p><em>data_figure4_Inactivation.mat</em></p> <p><em>data_figureS2_Activation.mat</em></p> <p><em>data_figureS2_Inactivation.mat</em></p> <p><em>data_Axon.mat</em></p> <p> </p> <p>The data structures contain the following fields:</p> <p><em>Mouse_Name</em> : name of the mouse.</p> <p><em>Mouse_DateOfBirth</em>: date of birth of the mouse (YMD).</p> <p><em>Mouse_Sex</em>: sex of the mouse (F or M).</p> <p><em>Mouse_Genotype</em>: genotype of the mouse.</p> <p><em>Mouse_Drug</em>: experimental condition of the recording (control = ‘No Drug’; blockade of glutamatergic transmission = ‘CNQX_DAPV’; blockade of glutamatergic transmission and nicotinic receptors = ‘CNQX_DAPV_MECA’; blockade of nicotinic receptors only = ‘MECA’).</p> <p><em>Mouse_Virus</em>: virus injected if any.</p> <p><em>Cell_Counter</em>; cell recorded in a given mouse.</p> <p><em>Cell_Type</em>: type of the recorded cell based on 2P imaging. (EXC, VIP, PV, SST, 5HT3aR_non_VIP).</p> <p><em>Cell_Depth</em>: depth of the recorded cell relative to pia (µm).</p> <p><em>Cell_TargetedBrainArea</em>: cortical area targeted (C2 column of the barrel cortex = C2).</p> <p><em>Cell_Fluorescence</em>: expression of the genetically encoded fluorophore (FALSE or TRUE). A neuron recorded in a VIP_IRES_Cre x LSL_tdTomato (cf <em>Mouse_Genotype</em>) with <em>Cell_Fluorescence</em>=TRUE is considered as a VIP neuron (cf <em>Cell_Type</em>).</p> <p><em>Sweep_Counter</em>: number of the sweep recorded for a given neuron (data were acquired across successive continuous sweeps of 30-60 s).</p> <p><em>Sweep_Type</em>: experimental condition during that sweep (Only spontaneous whisking onset = ‘Onset’; Whisking onset and whisker stimulus = ‘Onset_Whisker_Stim’ ; Optogenetic stimulation = ‘Opto_Stim’; Optogenetic activation = ‘Opto_Activation’; Optogenetic inactivation = ‘Opto_Inactivation’; ).</p> <p><em>Sweep_Start_Time</em>: time at the beginning of the sweep recording (YMDHms).</p> <p><em>Sweep_WhiskerAngle</em>: C2 whisker angular position extracted from simultaneous high-speed video filming (deg).</p> <p><em>Sweep_WhiskerAngle_SamplingRate</em>: sampling rate of the whisker angle trace.</p> <p><em>Sweep_WhiskingOnset_Time</em>: time of identified whisking onset - excluding any whisker stimulus shortly before or after (s).</p> <p><em>Sweep_MembranePotential</em>: membrane potential recording (mV) after cutting of the APs.</p> <p><em>Sweep_MembranePotential_SamplingRate</em>: sampling rate of the membrane potential signal (pt.s<sup>-1</sup>).</p> <p><em>Sweep_CurrentInjected</em>: current injected into the cell (pA).</p> <p><em>Sweep_CurrentInjected_SamplingRate</em>: sampling rate of current signal (pt.s<sup>-1</sup>).</p> <p><em>Sweep_WhiskerStim_Name</em>: whisker to which the magnetic stimulus was applied to (C2 or B2&C2).</p> <p><em>Sweep_WhiskerStim_Time</em>: onset times of the whisker stimulus (s).</p> <p><em>Sweep_OptoStim_Power</em>: light power applied for optogenetic manipulations (% of the max power).</p> <p><em>Sweep_OptoStim_Time</em>: onset times of the light pulses for optogenetic manipulations (s).</p> <p><em>Cell_ID</em>: unique cell identifier (= <em>Mouse_Name</em>+<em>Cell_Counter</em>).</p> <p><em>SpikeThreshold</em>: spike threshold used to detect APs (mV).</p> <p><em>Trial_WhiskingOnset</em>: data structure containing the cut signals used to compute averaged responses around whisking onset times.</p> <p><em>Trial_WhiskerStim</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times.</p> <p><em>Trial_WhiskerStim_QuietTrials</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times for trials without whisker movements.</p> <p><em>Trial_WhiskerStim_WhiskingTrials</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times for trials with whisker movements.</p> <p><em>Trial_Opto</em>: data structure containing the cut signals used to compute averaged responses around optogenetic stimulus onset times.</p> <p><em>Trial_OptoAndWhisker_QuietTrials</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times for trials with optogenetic manipulation and no whisker movements.</p> <p><em>Trial_OptoAndWhisker_WhiskingTrials</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times for trials with optogenetic manipulation and with whisker movements.</p> <p><em>Trial_OnlyWhisker_QuietTrials</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times for trials without optogenetic manipulation and without whisker movements.</p> <p><em>Trial_OnlyWhisker_WhiskingTrials</em>: data structure containing the cut signals used to compute averaged responses around whisker stimulus onset times for trials without optogenetic manipulation and with whisker movements.</p> <p><em>Trial_OnlyOpto</em>: data structure containing the cut signals used to compute averaged responses around optogenetic stimulus onset times in trials without whisker stimulus.</p>
Agricultural land use and livestock composition by case study of the SURE-Farm project - Input data for a dynamic nitrogen flow model
<p>Dataset used as input to the model by Pinsard et al (2021) and results published in D5.5 of the SURE-Farm project.</p>
Three-dimensional arrangement of human bone marrow microvessels revealed by immunohistology in undecalcified sections - registered sections (input data)
<p>These are the 3500x3500 ROI data, selected from complete scans.</p> <p>Following procedure was applied:</p> <p>- Coarse registration (Ulrich et al, 2014)<br> - ROI selection, 4k x 4k regions<br> - Normalisation<br> - Fine-grain registration (Lobachev et al, 2016)<br> - Crop to the center to obtain 3500x3500 size.</p> <p>We estimated the slice thickness to be 7 µm.</p>
Input data for ismip6-gris-results-processing
<p>This archive provides the input data used for scalar processing of ISMIP6 Greenland ice sheet output data. </p><p>Processing scripts are available on github (https://github.com/ismip/ismip6-gris-results-processing) and have been additionally archived on zenodo (https://zenodo.org/records/3939115).</p><p>Results are related to publication "The future sea-level contribution of the Greenland ice sheet: a multi-model ensemble study of ISMIP6" , Goelzer et al., 2020</p><p> </p>
S1Data: ChIP-seq Data from Ferrie et. al. "p300 Is an Obligate Integrator of Combinatorial Transcription Factors Inputs"
<p>ChIP data from Ferrie et. al. "p300 Is an Obligate Integrator of Combinatorial Transcription Factors Inputs"</p>
Data inputs and results from AI-supported title and abstract screening "Lack of evidence regarding markers identifying acute heart failure in patients with COPD: an AI-supported systematic review"
<p>These comma-separated data files were used to conduct the AI supported screening of [Lack of Evidence Regarding Markers Identifying Acute Heart Failure in Patients with COPD: An AI-supported Systematic Review (working title)], following the methodology described in the publication (URL/doi to be uploaded).</p> <p>These files provide insight into the AI-supported screening process and the choices made by the human reviewer.</p>
Bubble/Foam Simulations for Malej et al. 2023, source codes, input files, matlab files, data files
<p><i>.F are source codes, *.m are matlab scripts for analysis and postprocessing, .txt are data files including bathymetry and data from sensitivity tests</i></p>
Data for :Nitrogen availability in digestates from full-scale biogas plants following soil application as affected by operation parameters and input feedstocks
<p>This archive contains data for the paper "Nitrogen availability in digestates from full-scale biogas plants following soil application as affected by operation parameters and input feedstocks". Obtained from a soil incubation experiment for 80 days.</p><p> </p>
Data supporting: Improved Tangential Interpolation-based Multi-input Multi-output Modal Analysis of a Full Aircraft
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.