Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
54
datasets available to search
ShareScore release 0.9.0
Dataset results
54 results for “pompeii”
Online Appendix for Networks of Inequality: Access to Water in Roman Pompeii
<p><strong>Online Appendix for Networks of Inequality: Access to Water in Roman Pompeii (Samuli Simelius)</strong></p><p>in Journal of Computer Applications in Archaeology "A Bridge too Far – Historical, Archaeological and Criminal Network Research"(eds. M. De Bernardin, M. Lorenzon, L. Tambs & A. Traviglia)<br><br>Figure 1: The locations of the dwelling entrances used in the study, as well as the entrances to the unexcavated area.<br>Figure 2: The polyline layer representing the street network.</p><p>Table 1: The dwellings which I have interpreted differently from Matthew Notarian's interpretation – including their new water collection values.</p><p>Table 2: The population estimations of the dwellings and their new water collection values (seconds).<br>Table 3: The distances (minutes and meters) from dwellings to baths. </p>
Blue Room, Pompeii
Created in RealityCapture There will be excess vertices. Simply remove them Source: Objaverse 1.0 / Sketchfab
Pompeii - Public Water Fountain 29
This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is situated between VII.15.1 and VII.7.13 and is made of white lunense marble. The relief on the spout stone is of a rooster, and the carving is of very high quality. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2071501.htm The model was generated in Agisoft Metashape from 266 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Elbow handle from Campania-Pompeii, Camarina
"Elbow handle from Campania-Pompeii. Stem with phytomorphic decoration with long leaves ending, at the lower attachment, with a zoomorphic figured motif, perhaps an ibis, which holds a snake in its beak.. From the site of Camarina, Ragusa, Sicily, Italy. Roman Age. 1st century AD. Museo Archeologico Ibleo di Ragusa. 561 images. GDH ID and Catalog No. RG9143_1 Citation: Di Stefano, G., Sammito, A. & Scerra, S. (2008): ""Tesori camarinesi" … in fondo al mare della storia", in Thesaurus Hyblaeus: 14-27. We acknowledge the collaboration of the "Soprintendenza per i Beni Culturali ed Ambientali di Ragusa" and the "Parco Archeologico di Kamarina e Cava d'Ispica". Our most sincere thanks to General CC, retired, Renato Scuzzarello, the archaeologist Dr. Saverio Scerra, the architect Giorgio Battaglia, the restorer Stefania Patti Occhipinti and the archaeologists Veronica Falcone and Alessandra D'Izzia, the custodians of Parco Archeologico Marco Giardina, Giovanna Brugaletta e Rosario Licitra Source: Objaverse 1.0 / Sketchfab
Pompeii - Public Water Fountain 12 and Well
This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is situated at VI.1.19 and is made of grey peperino slabs. The relief on the spout stone is no longer visible, but was reportedly of Silenus. Behind the fountain is an old well, with the remains of a water tower against the nort eastern corner. The wall of the well facing the fountain has the remains of a lararium altar - when the fountain was originally discovered, a fresco of lares was still visible. The wells predate the fountains and were the original source of water before the aqueduct and fountains were built. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2060119.htm The model was generated in Agisoft Metashape from 541 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Pompeii - VI.6.1 Casa di Pansa - Latrine (R. 17)
The remains of this latrine were scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. This is a textbook version of an ideal Pompeii style latrine, down a small hallway in the kitchen of the House of Pansa. A raised tile floor slopes down to a drain in the corner, while two pedestals would have functioned as supports for a wooden seat, now missing. The sloping floor would have allowed a bucket of water to be used to "flush" the contents of the latrine down the drain. More pictures of the latrine and of the house it's part of can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2080701.htm The model was generated in Agisoft Metashape from 250 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Pompeii - V.1.7 - Peristlye Fountain
This large fountain covers the entire back wall of the Casa del Torello di Bronzo (V.1.7). They were scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is divided in to three alcoves, with extensive traces of plaster including plaster painted to look like marble. There are mosaic panels in front. Water would have cascaded down from each alcove, but also shot out from small jets set around the wall of the basin. On the left side of the fountain there is a junction box with valves for controlling the water. More information and photos can be seen on Pompeii in Pictures, here: https://www.pompeiiinpictures.com/pompeiiinpictures/R5/5%2001%2007.htm The model was generated in Agisoft Metashape from 417 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Pompeii - IX.5.9 Casa dei Pygmeii - Room 8
This is a quick scan of the surviving frescoes in Room 8 of the Casa dei Pygmeii in Pompeii. It features various nilotic scenes with pygmies doing a variety of activities, architecture, and various nilotic fauna like a hippopotamus and crocodiles. I particularly like the crocodile on the column! You can read more about this house on Pompeii in Pictures, here: http://pompeiiinpictures.com/pompeiiinpictures/R9/9%2005%2009%20p2.htm Scan generated in Agisoft Metashape using 226 photos taken with an iPhone SE. Source: Objaverse 1.0 / Sketchfab
Pompeii - Public Water Fountain 01
This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is situated on Via Stabiana in front of I.4.15 and is made of grey peperino slabs. The remains of a water tower made out of squared blocks of yellow tuff, which would have provided water to the fountains, are beside it. The relief on the spout stone is of a comedy mask. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2010415.htm The model was generated in Agisoft Metashape from 279 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Quadriporticus at Pompeii - better model
This model represents the results of a second pass using Regard3d on a series of photographs taken from a balloon. Photos courtesy Steven Ellis. Image matching: Keypoint ratio and Keypoint matching sensitivity were set to 'ultra'. Triangulation: Global (L2 rotation averaging, SoftL1 translation averaging), intrinsic camera parameters refined Densification: UseVis: yes Level: 1 Cell size: 2 Threshold: 0.7 wsize: 7 Min image num: 3 Max cluster size: 100 Surface: Poisson reconstruction, Depth: 9 Samples per Node: 2.9 Point weight: 4 Trim threshold: 5, GeomVisTest: yes Global seam level: yes Local seam level: yes Outlier removal: Gauss clamping Source: Objaverse 1.0 / Sketchfab
Necropolis, Pompeii
Created in RealityCapture I cant say why this model is upside down, but it is perfectly good model Source: Objaverse 1.0 / Sketchfab
Augustan Altar, Pompeii
3D model of the altar in the temple precinct adjoining the Eumachia building in the Forum of Pompeii. The model is based on Plate LXVI in Kurt Wallat's Die Ostseite des Forums von Pompeji (Peter Lang, 1997). P.S. it is a first attempt, and there are a couple of inaccuracies in the model. Source: Objaverse 1.0 / Sketchfab
Pompeii - VI.8.23 - Mosaic Fountain
This mosaic fountain is built up against the back wall of a small, lavishly painted, peristyle in the Casa Della Fontana Piccola (VI.8.23). It was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The facade of the fountain is covered in lavish mosaics bordered by seashells, with a small pool in front. In the pool is a pedestal; on the right a bronze statue of a seated man, and on the left the remains of a small marble statue. The house nextdoor (VI.8.22) is the house of the Fontana Grande, with a slightly larger fountain (Very creative naming!). More information and photos can be seen on Pompeii in Pictures, here: http://www.pompeiiinpictures.com/pompeiiinpictures/r6/6%2008%2023%20p1.htm The model was generated in Agisoft Metashape from 765 photos taken using a Nikon Z5. Photo alignment was run on high, model generated on medium - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Ekklesiasterion, Temple of Isis, Pompeii
Temple of Isis, Pompeii. (Exercise only, not an accurate representation). Source: Objaverse 1.0 / Sketchfab
Pompeii - Public Water Fountain 19
This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is situated between VI.16.3 and VI.16.4 and is made of grey peperino slabs. The relief on the spout stone is of an animal, either a jackal or panther. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2061603.htm The model was generated in Agisoft Metashape from 300 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Pompeii - Public Water Fountain 20
This public water fountain was scanned as part of the 2022 Pompeii Water and Sanitation Project field school run by the University of Missouri. The fountain is situated at VI.16.19 and is made of grey peperino slabs. The relief on the spout stone is of aflask with straps. The brass spout and plumbing is modern. More photos can be seen here: https://pompeiiinpictures.com/pompeiiinpictures/Fountains/Fountain%2061619.htm The model was generated in Agisoft Metashape from 232 photos taken using a Nikon Z5. Photo alignment was run on high, as was model generation - model has been decimated for export, and made manifold for 3D printing. Source: Objaverse 1.0 / Sketchfab
Odeon at Pompeii
Another test of the found video to model workflow. Used regard3d to stitch the stills together. Not having the original camera, I assumed a gopro and used http://www.kolor.com/wiki-en/action/view/Autopano_Video_-_Focal_length_and_field_of_view for details on focal length etc. This is the model straight out of the workflow. There are some bits and blobs floating around that one would delete with eg meshlab. Source video: https://www.youtube.com/watch?v=6IL3ilHMrwg Source: Objaverse 1.0 / Sketchfab
Pompeii Ekklesiasterion
3D model made in Sketchup based loosely on the Ekklesiasterion at Pompeii, using directions and resources made by Valeria Vitale for Sunoikisis. Created for the University of London School of Advanced Studies, Institute of Classical Studies 3D Imaging for Classics and Cultural Heritage Summer School. Source: Objaverse 1.0 / Sketchfab
Ekklesiasterion, Temple of Isis (Pompeii)
A 3D reconstruction of the Ekklesiasterion in the Temple of Isis, Pompeii, created using SketchUp Make 2017. This was done as an exercise for a postgraduate module on Digital Approaches to Cultural Heritage. Source: Objaverse 1.0 / Sketchfab
Illuminance distributions in reconstruction of Regio 1 Insula 11 in Pompeii, Italy (geopackage)
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.