Skip to main content
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

1,581

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

1,581 results for “walking”

Learn how ShareScore rates datasets ↗
edi56/100

Evidence of alliesthesia during a neighborhood thermal walk in a hot and dry city (Phoenix, Arizona)

Thermal comfort should be an integral part of urban design in the context of global warming and urbanization. The influence of built infrastructure on thermal perceptions of walking pedestrians is not well explored, but thermal walks that combine sensing technologies with simultaneous collection of user experiences is a promising research direction to shorten the gap. We examined the relationships between the built environment, heat perception, and behavioral coping mechanisms in one of the most heat vulnerable Phoenix neighborhoods. Using Phoenix as an example, where extremely hot summer temperatures are becoming a norm, can help to address heat challenges of other cities that are facing rising temperatures. This study is an experimental citizen science project in which participants were surveyed during a 1-hour walk around the neighborhood and recorded their experience in a field guide. Walkers wore GPS devices and microclimate measurements were taken to gain deeper insights on subjective heat perception and physical body heat accumulation during the walk. Results revealed the differences in heat perception across a variety of urban landscapes. Participants identified preferred and most challenging locations. Combined GPS and microclimate data mapped in GIS visualized dependencies between the streetscape, microclimate, and thermal perceptions. Moreover, we presented the evidence of thermal alliesthesia, a feeling of pleasure from relieving of thermal discomfort. This project is one of the first to examine the impact of urban environment on dynamic psychological and physiological responses to heat. Using sensing technologies and collecting subjective perceptions, this research will inform the design changes in the neighborhood that will undergo redevelopment. It can serve as an example for other cities striving to adapt urban microclimates to new extremes.

openCC0Jan 2022View details →
edi56/100

Continuous stream CO2 and temperature data and sensor calibration grab samples from five NEON sites (CARI, COMO, KING, MART, WALK), August 2021-April 2024.

This package contains: 1) sensor-based measurements of dissolved CO2 concentration and temperature, and 2) dissolved CO2 concentration from grab samples that were used to calibrate the sensor data, collected at five stream sites in the NEON network (CARI- Caribou Creek, AK; COMO- Como Creek, CO; KING- Kings Creek, KS; MART- Martha Creek, WA; and WALK- Walker Branch, TN) between August 2021 - April 2024. The grab sample dataset contains a combination of samples collected by NEON (DP1.20097.001) and additional samples collected by project personnel. All samples were collected using the headspace equilibration method, and dissolved CO2 concentrations were calculated using the 'neonDissGas' R package (https://github.com/NEONScience/NEON-dissolved-gas). The sensor dataset contains CO2 concentrations measured with an eosGP CO2 gas probe, averaged to 15-minute intervals and corrected to align with grab sample concentrations using a site-specific grab versus sensor regression. Due to inaccuracies in the eosGP temperature data, we instead include the temperature data from NEON that was used to convert CO2 between units of ppmv and umol/L (DP1.20053.001 for CARI, KING, MART, and WALK, and data from the multiparameter sonde for COMO). All NEON data used in this data package references the RELEASE-2025 version of each data product (downloaded February 2025).

openCC (other)Oct 2025View details →
edi56/100

Fine-scale meteorological observations from walking traverses in two Phoenix Area Social Survey (PASS) 2017 neighborhoods (2019)

This dataset includes human-biometeorological observations from 2.5 km walking traverses with a mobile weather station. The traverses occurred in two 2017 Phoenix Area Social Survey neighborhoods (U18: South Phoenix/Salt River (Audubon) and W15: Camelback Mountain) on one day in June and October, at 12pm and 4pm on each day. Specifically, air temperature, humidity, wind speed, and radiant energy (infrared and solar radiation) in 3-dimensions were measured at 2-second intervals. Additionally, mean radiant temperature was calculated from the radiation measurements. The meteorological observations are spatially referenced with latitude and longitude coordinates. The paths through the neighborhoods were chosen to maximize proximity to PASS 2017 participants’ homes.

openCC0Feb 2022View details →
zenodo52/100

Triaxial accelerometer gait dataset: foot and lower back motion during normal and metronome walking

<p><strong>This dataset contains accelerometric data collected from young and older individuals walking in a controlled environment. The data were recorded using two triaxial accelerometers, one attached to the participant's lower back and the other attached to the foot. Participants were instructed to walk back and forth along a 205-meter corridor under two different conditions:</strong></p> <p><strong>Normal walking: </strong>Participants walked at their preferred walking speed, reflecting their natural gait and pace.</p> <p><strong>Metronome walking: </strong>Participants synchronized their walking pace to a metronome set to their preferred walking cadence. This condition introduced a rhythmic element to the walking pattern, allowing for the study of gait changes when adhering to an external tempo.</p> <p><strong>Another condition was also measured to introduce a more variable and dynamic walking pattern that reflects everyday pedestrian movement in a real-world context.</strong></p> <p><strong>Free outdoor walking:</strong> Older participants engaged in approximately 5 minutes of free walking in an urban environment, navigating city streets. During this activity, only the lumbar accelerometer was used to record data.&nbsp;</p>

opencc-by-4.0Nov 2023View details →
edi52/100

Dissolved CO2, CH4, and ions in groundwater from five sites in the NEON network (CARI, COMO, KING, MART, WALK), U.S., 2021-2024.

This package contains groundwater chemistry measurements collected from groundwater wells between June 2021 – May 2024 at five sites in the U.S. National Ecological Observatory Network (NEON): CARI- Caribou Creek, AK; COMO- Como Creek, CO; KING- Kings Creek, KS; MART- Martha Creek, WA; and WALK- Walker Branch, TN. The dataset includes concentrations of dissolved gases (CO2 and CH4), ions (F, Cl, NO2, Br, NO3, PO4, SO4, Na, NH4, K, Mg, Ca), silica (Si), and nutrients measured by colorimetric methods (NO3, NH4, PO4). When available, we also report measurements of water temperature, specific conductivity (SpC), pH, dissolved O2, and barometric pressure. Sample collection and analysis was conducted across three labs with additional assistance from the NEON Research Support Services program. Whenever possible, we matched our field sampling methods to NEON’s protocols for groundwater sampling to ensure samples would be comparable to preexisting data from these sites. Any deviations from these protocols are described in the methods.

openCC (other)Nov 2025View details →
zenodo48/100

Statistical analysis and dataset for: A high-throughput and sensitive method for food preference assays in walking insects

<p>Linked to the journal article published in bioRxiv (https://doi.org/10.1101/2024.04.10.588882).</p> <p><em><strong>Abstract</strong></em></p> <p>Insects pose significant challenges in both pest management and ecological conservation. Often, the most effective strategy is employing toxicant-laced baits, which must also be designed to specifically attract and be preferred by the targeted species for optimal species-specific effectiveness. However, traditional methods for measuring bait preference are either non-comparative, meaning that most animals only ever taste one bait, or suffer from methodological or conceptual limitations. Here we demonstrate the value of direct comparison food preference assays using the invasive and pest ant <em>Linepithema humile </em>as a model. We compare the food preference sensitivity of non-comparative (one visit to a food source) and sequential comparative (visiting one type of food then another) assays at detecting low levels of aversive quinine in sucrose solution. We then introduce and test a novel dual-choice feeder method for simultaneous comparative evaluation of bait preferences, testing its effectiveness in discerning between foods with varying quinine or sucrose levels. While the non-sequential assay could not detect aversion to 1.25mM quinine in 1M sucrose, the sequential comparative approach detected aversion to quinine levels as low as 0.94mM. The novel dual feeder method approach could detect aversion to quinine levels as low as 0.31mM, and also preference for 1M sucrose over 0.75M sucrose. The dual-feeder method, combines the sensitivity of comparative evaluation with high throughput, ease of use, and avoidance of interpretational issues. This innovative approach offers a promising tool for rapid and effective testing of bait solutions, contributing to the development of targeted control strategies. Moreover, the method can be easily modified for application to a wide range of walking insects, such as cockroaches, crickets, and beetles.</p>

opencc-by-4.0Apr 2024View details →
zenodo48/100

Walk Up Aniene Motivation Survey

<p>The Walk Up Aniene motivation study was conducted within the ongoing H2020 project named <a href="https://actionproject.eu/">ACTION</a> (pArticipatory sCience Toolkit agaInst pollutiON) on citizen science. Volunteers participate to citizen science initiatives for multiple reasons: personal enjoyment, desire for improvement or achievement, establishment of personal relationships, care for the environment, etc.<br> Studying motivation and investigating the factors influencing people participation to citizen science projects is an essential aspect in the analysis of citizen science communities. Understanding the reasons that foster people to engage can support the successful design and implementation of effective participant involvement tasks, as well as pave the way for long-term engagement.<br> The goal of the study is to analyse the motivation to participate of a specific citizen science community focused on fighting soil and water pollution in the Walk Up Aniene pilot supported by the ACTION project. More info on the pilot available at <a href="https://actionproject.eu/citizen-science-pilots/walk-up-aniene/">https://actionproject.eu/citizen-science-pilots/walk-up-aniene/</a>.</p> <p>The Walk Up Aniene motivation study is part of the study about motivation in citizen science projects conducted within the ACTION project (<a href="https://doi.org/10.5281/zenodo.5753092">https://doi.org/10.5281/zenodo.5753092</a>). The survey&nbsp;was designed and administered using the <a href="https://coney.cefriel.com/">Coney</a>&nbsp;toolkit.</p> <p>The research object adopts the <a href="https://www.researchobject.org/ro-crate/1.0/">RO-Crate</a>&nbsp;specification. Files made available within the research object&nbsp;are:</p> <ul> <li><em>*-procedure.ttl</em>&nbsp;contains the RDF representation of the structure of the&nbsp;conversational survey (questions, answers, etc.)&nbsp;using the <a href="https://w3id.org/survey-ontology">Survey Ontology</a></li> <li><em>*-results.ttl&nbsp;</em>contains the RDF representation of the answers collected using the <a href="https://w3id.org/survey-ontology">Survey Ontology</a></li> <li><em>*-survey.tll </em>contains a comprehensive&nbsp;RDF representation of the survey data&nbsp;using the <a href="https://w3id.org/survey-ontology">Survey Ontology</a></li> <li><em>*-results.csv </em>contains the CSV of the collected&nbsp;answers</li> <li>*-<em>script.R</em> is the R script developed to analyse the collected answers</li> <li>*-<em>mean-var-motivating-questions.csv </em>contains&nbsp;the computed mean and average for each question considered (observable variables)</li> <li>*-<em>mean-var-motivating-factor.csv </em>contains the computed mean and average for each motivation factor considered (latent variables)</li> <li>*-<em>correlation-factors-global-motivation.csv </em>contains the correlation analysis between each motivation factor and the global motivation&nbsp;</li> </ul>

opencc-by-4.0Dec 2021View details →
zenodo48/100

Data in: Aging power spectrum of membrane protein transport and other subordinated random walks

<p>Datasets generated in the report &quot;Aging power spectrum of membrane protein transport and other subordinated random walks&quot;. Included data are:</p> <p><strong>Numerical simulations&nbsp;</strong><br> RWdata1.mat: 10,000 realizations, subordinated random walk with Hurst exponent, <em>H</em>=0.3&nbsp;and <span class="math-tex">\(\alpha\)</span>=0.4.<br> RWdata3.mat:&nbsp;10,000 realizations, subordinated random walk with Hurst exponent, <em>H</em>=0.7&nbsp;and <span class="math-tex">\(\alpha\)</span>=0.4.<br> RWdata8.mat:&nbsp;5,000 realizations, subordinated random walk with Hurst exponent, <em>H</em>=0.75&nbsp;and <span class="math-tex">\(\alpha\)</span>=0.8.<br> RWdataCTRW.mat:&nbsp;10,000 realizations, continuous time random walk (CTRW),&nbsp;<span class="math-tex">\(\alpha\)</span>=0.7.</p> <p><strong>Spectra of&nbsp;simulations</strong><br> PSDdata1.mat: Power spectral density (PSD) of a subordinated random walk with Hurst exponent, <em>H</em>=0.3&nbsp;and <span class="math-tex">\(\alpha\)</span>=0.4. Five different realization times are used to compute the PDS: 2^8,&nbsp;2^10,&nbsp;2^12,&nbsp;2^14, and 2^16.<br> PSDdata3.mat:&nbsp;PSD of a subordinated random walk with Hurst exponent, <em>H</em>=0.7&nbsp;and <span class="math-tex">\(\alpha\)</span>=0.4. Five different realization times are used to compute the PDS: 2^8,&nbsp;2^10,&nbsp;2^12,&nbsp;2^14, and 2^16.<br> PSDdata8.mat: PSD of a&nbsp;subordinated random walk with Hurst exponent, <em>H</em>=0.75&nbsp;and <span class="math-tex">\(\alpha\)</span>=0.8.&nbsp;Four&nbsp;different realization times are used to compute the PDS: 2^15,&nbsp;2^16,&nbsp;2^17, and 2^18.<br> PSDs_CTRW.mat: PSD of a&nbsp;continuous-time random walk (CTRW),&nbsp;<span class="math-tex">\(\alpha\)</span>=0.7. Five different realization times are used to compute the PDS: 2^8,&nbsp;2^10,&nbsp;2^12,&nbsp;2^14, and 2^16.</p> <p><strong>Experimental data of Nav1.6 channels in the soma of hippocampal neurons</strong><br> NavMSDtimes.csv: ensemble-averaged (EA) MSD and time-averaged (TA) MSD. The TA-MSD is measured&nbsp;for three observation times, 64, 128, and 256 frames (3.2, 6.4, and 12.8 s).<br> NavPSD.csv: Power spectral density (PSD) measured for&nbsp;three observation times, 64, 128, and 256 frames.</p>

opencc-by-4.0Sep 2021View details →
zenodo48/100

Spectral decompositions dataset for the paper "Random walk informed heterogeneities detection reveals how the lymph node conduits network influences T-cells collective exploration behavior"

<p>This file contains the left and right approximated eigenvectors, as well as the approximated eigenvalues of the networks analyzed in the paper : Random walk informed heterogeneities detection reveals how<br> the lymph node conduits network influences T-cells collective<br> exploration behavior</p>

opencc-by-4.0Feb 2023View details →
edi48/100

Canopy Trimming Experiment (CTE) Walking Stick Data

The objective of these data is to determine how green litter deposition and canopy opening associated with a hurricane independently and jointly affect population dynamics of walking sticks (Lamponius portoricensis). Support for this work was provided by grants BSR-8811902, DEB-9411973, DEB-9705814 , DEB-0080538, DEB-0218039 , DEB-0620910 , DEB-1239764, DEB-1546686, and DEB-1831952 from the National Science Foundation to the University of Puerto Rico as part of the Luquillo Long-Term Ecological Research Program. Additional support provided by the University of Puerto Rico and the International Institute of Tropical Forestry, USDA Forest Service.

openCC (other)May 2023View details →
edi48/100

Elevational gradients of walking stick (Lamponius portoricensis) abundance

Abundance data were collected for Lamponius portoricensis from a mixed forest transect and from a palm dominated transect set along an elevational gradient in the Sonadora watershed. Each transect ranged from 300 m to 1000 m in elevation, with elevational strata located at 50 m intervals and 10 plots per stratum. No palm dominated forest could be located at 700 m in the watershed, resulting in 15 strata (150 plots) along the mixed forest transect and 14 strata (140 plots) along the palm forest transect. The data set includes 5 files that contain abundance data for walking sticks (Lamponius portoricensis) along an elevational gradient within the Sonadora River watershed. Three files contain data from the mixed forest transect but differ in the year during which they were collected (2007, 2008, 2017). The 'Walking Stick Palm" files contains data from a palm forest elevational transect from 2008 and 2017, for which all sites were located in palm dominated forest in the same watershed. Note: Plots at 250 m of elevation were only sampled during 2007, no palm dominated forest could be located at 750 m of elevation; that elevation is omitted from the palm transect. Support for this work was provided by grants BSR-8811902, DEB-9411973, DEB-9705814 , DEB-0080538, DEB-0218039 , DEB-0620910 , DEB-1239764, DEB-1546686, and DEB-1831952 from the National Science Foundation to the University of Puerto Rico as part of the Luquillo Long-Term Ecological Research Program. Additional support provided by the University of Puerto Rico and the International Institute of Tropical Forestry, USDA Forest Service.

openCC (other)May 2023View details →
zenodo44/100

Every Walk You Take Project - Images

Open the record for dataset details and reuse information.

opencc-by-4.0Dec 2023View details →
zenodo44/100

Kuopio gait dataset: motion capture, inertial measurement and video-based sagittal-plane keypoint data from walking trials

<p>This dataset contains motion capture (3D marker trajectories, ground reaction forces and moments), inertial measurement unit (wearable Movella Xsens MTw Awinda sensors on the pelvis, both thighs, both shanks, and both feet), and sagittal-plane video (anatomical keypoints identified with the OpenPose human pose estimation algorithm) data.<br>The data is from 51 willing participants and collected in the HUMEA laboratory in the University of Eastern Finland, Kuopio, Finland, between 2022 and 2023. All trials were conducted barefoot.</p> <p>The file structure contains an Excel file containing information of the participants, data folders under each subject (numbered 01 to 51), and a MATLAB script.</p> <p>The Excel file has the following data for the participants:</p> <ul> <li><strong>ID</strong>: ID of the participants from 1 to 51</li> <li><strong>Age</strong>: age of the participant in years</li> <li><strong>Gender</strong>: biological sex as M for male, F for female</li> <li><strong>Leg</strong>: the participant's dominant leg, identified by asking which foot the participant would use to kick a football; R for right, L for left</li> <li><strong>Height</strong>: height of the participant in centimeters</li> <li><strong>Invalid_trials</strong>: list of invalid trials in the motion capture data (MOCAP) data, usually classified as such because the participant did not properly step on the middle force plate</li> <li><strong>IAD</strong>: inter-asis distance in millimeters, the distance between palpated left and right anterior superior iliac spine, measured with a caliper</li> <li><strong>Left_knee_width</strong>: width of the left knee from medial epicondyle to lateral epicondyle in millimeters, palpated and measured with a caliper</li> <li><strong>Right_knee_width</strong>: same as above for the right knee</li> <li><strong>Left_ankle width</strong>: width of the left ankle from medial malleolus to lateral malleolus in millimeters, palpated and measured with a caliper</li> <li><strong>Right_ankle_width</strong>: same as above for the right ankle</li> <li><strong>Left_thigh_length</strong>: the distance between the greater trochanter of the left femur and the lateral epicondyle of the left femur in millimeters, palpated and measured with a measuring tape</li> <li><strong>Right_thigh_length</strong>: same as above for the right thigh</li> <li><strong>Left_shank_length</strong>: the distance between the medial epicondyle of the femur and the medial malleolus of the tibia in millimeters, palpated and measured with a measuring tape</li> <li><strong>Right_shank_length</strong>: same as above for the right shank</li> <li><strong>Mass</strong>: mass in kilograms, measured on a force plate just before the walking measurements</li> <li><strong>ICD</strong>: inter-condylar distance of the knee of the dominant leg, measured from low-field MRI</li> <li><strong>Left_knee_width_mocap</strong>: distance between reflective MOCAP markers on the medial and lateral epicondyles of the knee in millimeters, measured from a static standing trial; -1 for missing (subject did not have those markers)</li> <li><strong>Right_knee_width_mocap</strong>: same as above for the right knee</li> </ul> <p>The folders under each subject (folders numbered 01 to 51) are as follows:</p> <ul> <li><strong>imu</strong>: "Raw" inertial measurement unit (IMU) data files that can be read with Xsens Device API (included in Xsens MT Manager 4.6, which may be unavailable these days, not sure). You won't need this if you use the data in the imu_extracted folder.</li> <li><strong>imu_extracted</strong>: IMU data extracted from those data files using the Xsens Device API, so you don't have to. <ul> <li>The data is saved as MATLAB structs where the fields are named as a sensor ID (e.g., "B42D48"). The sensor IDs and their corresponding IMU locations are as follows: <ul> <li>pelvis IMU: B42DA3</li> <li>right femur IMU: B42DA2</li> <li>left femur IMU: B42D4D</li> <li>right tibia IMU: B42DAE</li> <li>left tibia IMU: B42D53</li> <li>right foot IMU: B42D48</li> <li>left foot IMU: B42D51 (except for subjects 01 and 02, where left foot IMU has the ID B42D4E)</li> </ul> </li> <li>Some of the data are just zeros as they couldn't be read from these sensors, but under each sensor, the fields "calibratedAcceleration", "freeAcceleration", "time", "rotationMatrix", and "quaternion" contain usable data. <ul> <li>time: Contains time stamps of the measurement at each frame recorded at 100 Hz, so if you remove the first value from all values in the time vector and divide the result by 100, you will get the time in seconds from the beginning of the walking trial.</li> <li>calibratedAcceleration and freeAcceleration: Contain triaxial acceleration data from the accelerometers of the IMU. freeAcceleration is just calibratedAcceleration without the effect of Earth's gravitational acceleration.</li> <li>rotationMatrix: Orientations of the IMU as rotation matrices.</li> <li>quaternion: Orientations of the IMU as quaternions.</li> </ul> </li> </ul> </li> <li><strong>openpose</strong>: Trajectories of the keypoints identified from sagittal plane video frames, saved as json files. <ul> <li>The keypoints are from the BODY_25 model of OpenPose (https://cmu-perceptual-computing-lab.github.io/openpose/web/html/doc/md_doc_02_output.html).</li> <li>Each frame in the video has its own json file.</li> <li>You can use the function in the script "OpenPose_to_keypoint_table.m" in the root folder to read the keypoint trajectories and confidences of all frames in a walking trial into MATLAB tables. The function takes as argument the path to the folder containing the json files of the walking trial.</li> </ul> </li> <li>Note that some subjects (11, 14, 37, 49) do not have keypoint and IMU data.</li> </ul> <p>The folders under each subject are divided into three ZIP archives with 17 subjects each.</p> <p>The script "OpenPose_to_keypoint_table.m" is a MATLAB script for extracting keypoint trajectories and confidences from JSON files into tables in MATLAB.</p> <p><br><strong>Publication in Data in Brief</strong>: <a href="https://doi.org/10.1016/j.dib.2024.110841" target="_blank" rel="noopener">https://doi.org/10.1016/j.dib.2024.110841</a></p> <p><br><strong>Contact</strong>: Jere Lavikainen, jere.lavikainen@uef.fi</p>

opencc-by-4.0Jan 2024View details →
zenodo44/100

Accurately modeling biased random walks on weighted networks using node2vec+ - Additional data

<p>Human gene interaction network data used to reproduce gene classification experiments&nbsp;https://github.com/krishnanlab/node2vecplus_benchmarks</p>

opencc-by-4.0Aug 2022View details →
zenodo44/100

Full-Body 3D Human Gait Dataset walking on flat ground

<p>This dataset contains full-body 3D gait data collected from 26 healthy participants (10 males, 16 females) with an average age of 28.19 &plusmn; 7.77 years. Data was captured using the Xsens Awinda MTw inertial measurement system, comprising 17 wireless sensors operating at a 60Hz sampling frequency.</p> <p>Key Features:</p> <ul> <li>Full-body motion data using MVN Analyze software's full-body model</li> <li>Anthropometric measurements: height (170.5 &plusmn; 8.61 cm), foot length (26.47 &plusmn; 1.88 cm), shoulder width (39.32 &plusmn; 7.79 cm), and wrist span (131.36 &plusmn; 8.85 cm)</li> <li>Four distinct walking paths: Mixed (straight and curved), Circle (3m diameter), Turn (180-degree turns), and Zigzag</li> <li>Total of 1,024,295 frames (17,071.58 seconds) of gait recordings</li> <li>Average of 3,568.97 &plusmn; 1,204.26 frames per recording (59.48 &plusmn; 20.07 seconds)</li> </ul> <p>The dataset includes various walking patterns designed to capture a wide range of gait characteristics, including straight walks, gentle curves, sharp turns, and zigzag movements. Participants were allowed some freedom in executing turns, particularly in the Zigzag and Mixed paths, to introduce natural variations in gait patterns.</p> <p>This comprehensive dataset is suitable for gait analysis, biomechanics research, and the development of motion synthesis algorithms, particularly those focused on normal walking patterns on a fixed surface with various turning scenarios.</p> <p>Dataset Structure:</p> <ol> <li>'<strong>participants.xlsx</strong>': An Excel file containing participant codes and their anthropometric data.</li> <li>'<strong>data</strong>' folder: Contains subdirectories named with participant codes. <ul> <li>Each participant subdirectory contains CSV files of different gait recordings for that participant.</li> </ul> </li> </ol> <p>This dataset was collected as part of the study:</p> <p><strong>Carneros-Prado, D., Dobrescu, C. C., Caba&ntilde;ero, L., Villa, L., Altamirano-Flores, Y. V., Lopez-Nava, I. H., &hellip; &amp; Herv&aacute;s, R. (2024). Synthetic 3D full-body skeletal motion from 2D paths using RNN with LSTM cells and linear networks. </strong><strong><em>Computers in Biology and Medicine, 180,</em></strong><strong> 108943.</strong></p>

opencc-by-4.0Jul 2024View details →
zenodo44/100

The CAD WALK Healthy Controls Dataset

<p>This dataset contains the raw dynamic plantar pressure measurements of 55 healthy Dutch individuals collected at Sint Maartenskliniek, Nijmegen. For each individual, 24 dynamic plantar pressure measurements were collected from both feet. Also collected are walking speeds for each plantar pressure measurements, and demographic information of all individuals measured (age, height, weight, shoe size, sex, handedness, leg dominance).</p> <p>For more information, please see the Readme.pdf file accompanying this dataset.</p>

opencc-by-4.0Dec 2017View details →
zenodo44/100

The CAD WALK Hallux Valgus Dataset (Pre-Surgery)

<p>This dataset contains the raw dynamic plantar pressure measurements of 50 Dutch individuals with Hallux Valgus collected prior to surgical intervention at Sint Maartenskliniek centres in the Netherlands. For each individual, between 8-15 dynamic plantar pressure measurements were collected from both feet. Also collected are walking speeds for each plantar pressure measurements, and demographic information of all individuals measured (age, height, weight, shoe size, sex, handedness, leg dominance). Additionally, x-ray images were used to measure the hallux valgus angle and intermetatarsal angle for each hallux valgus case. Finally, each participant also completed two foot self-assessment questionnaires: the Foot Function Index (FFI-5pt) and the Manchester-Oxford foot questionnaire. The score from these self-assessments are also provided.</p> <p>For more information, please see the Readme.pdf file accompanying this dataset.</p>

opencc-by-4.0Dec 2018View details →
zenodo44/100

Gait Kinematics Data from 2 minute walk test assessment

<p>The dataset consists of gait parameters collected from a single male participant (age: 29 years, height: 1.72 m, mass: 78.3 kg) at four time points: baseline, post-immobilization (post-IM), post-resistance training (post-RT), and 14 weeks post-RT (post-14). The participant underwent a 14-day single-leg immobilization followed by an 8-week resistance training (RT) program. Gait data were recorded during the Two-Minute Walk Test (2MWT) under two conditions: comfortable (COM) and fast (MAX) walking speeds. The dataset includes kinematic data captured using ten synchronized Opal inertial sensors (APDM Inc.) placed at specific anatomical locations, sampled at 128 Hz. The recorded signals were processed using the Mobility Lab&trade; software.</p>

opencc-by-4.0Sep 2024View details →
zenodo44/100

Non-relativistic abberation and Doppler shift as experienced in walking with different velocities relative to falling rain

<p>Non-relativistic aberration and Doppler shift as experienced in walking with different velocities relative to falling rain. The scenario on the left (standing) shows the orientation of the umbrella for maximum protection of a person at rest perpendicular to the falling drops. On the right (walking), the situation for a person with an umbrella moving relative to the scenario on the left is shown. The bottom panels depict the related velocities and how they are added. vr is the velocity of the raindrops in the frame of reference of the ground, vr&prime; that in the frame of references of the person with the umbrella, with (right) and without (left) velocity vP with respect to the ground. Note, in the frame of reference of the person the ground moves with &minus;vP. The arrival angle and rate of the raindrops depend on the velocities and are described with aberration and Doppler shift, respectively.</p> <p>Figure adapted from Hoffmann (1983).</p>

opencc-by-4.0Oct 2024View details →
OpenNeuro40/100

Audiocue walking study

Open the record for dataset details and reuse information.

openCreative commonsJan 2019View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record