X-ray tomography and experimental data on 3D printed aerogels

<p>This data set has been uploaded to supplement the article on raw X-ray tomography data of &#39;Additive manufacturing of silica aerogels&#39; (doi: 10.1038/s41586-020-2594-0) and contains:</p> <ul> <li>Reconstructed X-ray tomography of Mn containing printed aerogel filaments (reconstructed data may be available upon request) used for figure 2 j, k and l</li> <li>Raw data of particle size distributions reported in figure 1f</li> <li>Raw data on rheological measurements reported in figure 1g and h</li> <li>Measured nitrogen sorption isotherms and resulting BJH pore size distribution reported in figure 2 m and n</li> <li>Thermogravimetric analysis used for figure 2 o.</li> <li>Raw data on pumping flow rate and toluene degradation reported in figures 4 f and g</li> <li>Raw data of thermal conductivity measurements of printed aerogel boards.</li> <li>Input files for 3D printer for different 3D printed objects reported in the article.</li> </ul>