Skip to main content
ConductScienceScienceDex
zenodoopen

Active and passive surface-wave recordings along high-speed lines

<p>Seismic uniform linear arrays (ULAs) with a length of 23.75 m and composed by 96 geophones spaced at intervals of 25 cm were installed in 3 different sites (sites 1, 2 and 3). The ULAs were positioned on the cess (i.e. the track side) along the railway, at approximately 2 m from the rails, on track 1 for site 1 and track 2 for sites 2 and 3. Active seismic data was acquired by vertically striking a metal plate placed in-line, 12.5 cm away from the first (direct shot) and last (inverse shot) geophones.The impact was achieved with a hammer (1.5 kg) and waves propagation along the ULA was recorded for 2 s with a sampling interval of 0.5 ms (i.e. sampling rate of 2 kHz) and a pre-triggering delay of -0.02 s. Six direct and inverse shots were stacked in the time domain to enhance signal-to-noise ratio.HST passages on tracks 1 and 2 were also recorded with the exact same ULAs for durations of 120 s with a sampling interval of 2 ms (i.e. sampling rate of 500 Hz). The recordings were initiated manually upon visual confirmation of approaching trains at the site.</p>

ShareScore

32/100

Overall dataset sharing score

Score breakdown

These five areas show where the dataset supports — or may limit — practical reuse.

Stewardship
4
Harmonization
4
Access
16
Reuse readiness
8
Engagement
0

Dataset details

Repository
zenodo
Published
November 29, 2023
License
cc-by-4.0
DOI
10.5281/zenodo.10228863

Scored with release 0.9.0

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.