Absolute radiation tolerance of amorphous alumina coatings at room temperature

<p>Set consists four folders named after the methods used to obtained the data i.e. Nanoindentation,&nbsp; XRD, TEM and SEM.</p> <p><strong>&rarr; SEM </strong></p> <p>In SEM folder there are 2 original image files that make up Figure 2 in the paper. Based on the filenames, they are clearly identifiable.</p> <p><strong>&rarr; TEM</strong></p> <p>In SEM folder there are 12 original image files that make up Figures from 7 to 12 in the paper. Based on the filenames, they are clearly identifiable.</p> <p><strong>&rarr; XRD</strong></p> <p>In XRD folder there are three .txt files that makes up the Fig. 3 in the paper. In each of them there are two columns, where 1^st is 2&theta; (&deg;) and 2^nd is Intensity (counts per second). Based on the filenames, they are clearly identifiable.</p> <p><strong>&rarr; Nanoindentation</strong></p> <p>To each material state (dpa level) there are two .txt files assigned. First is named &lsquo;[sample number] [dpa] HE [force] LD.txt&rsquo; and contains Load-displacement data. In such a file there are two columns, where 1^st is displacement (nm) and 2^nd is force (mN). Single curves are arranged one under another (separated with two empty rows). Second file is named &lsquo;[sample number] [dpa] HE [force] AR.txt&rsquo; and contains aggregate data with the columns named. For virgin and 25 dpa samples there are additional files named &lsquo;[sample number] [dpa] HE FQSM [coating thickness] AR.txt&rsquo; . These were used to made up Figures 3 and 4 in the paper.</p>