On the impact of the antenna radiation patterns in passive radio sensing: dataset

<p>The measurement sessions took place in a hall with size 6.15 m &times; 14.45 m and floor-ceiling height equal to 3.35 m.&nbsp;&nbsp;TX and RX nodes are spaced d=4.00&nbsp;m apart, while the LOS is horizontally placed at&nbsp;h=0.99 m from the floor.</p> <p>The received power P is measured using a real-time spectrum analyzer (SA) with a built-in tracking generator. The SA tracks N=401&nbsp;frequency points equally spaced with&nbsp;&Delta;f=1.25 MHz. Further settings are detailed in the paper:</p> <p><a title="Deposited paper " href="https://arxiv.org/abs/2405.09352" target="_blank" rel="noopener">https://arxiv.org/abs/2405.09352</a></p> <p>1) dir_dir_measurements.csv: [401x75]: received power measurements [dBm] using antenna with a directional pattern (described in the paper) and target on each of &nbsp;the 75 positions. These are ordered following the enumeration of the scenario scheme (see Figure 2 in the paper).</p> <p>2) dir_dir_measurements.csv: [401x2]: free space received power measurements (before and after the experiment) [dBm]</p> <p>3) frequency_points.csv [401x1]: observed 401 frequencies from 2.149 GHz to 2.649 GHz (resolution BW 400kHz, 1.2MHz freq. spacing)</p> <p>4) omni_omni_measurements.csv: [401x75]: received power measurements [dBm] with omnidirectional antenna and target on each of &nbsp;the 75 positions. These are ordered following the enumeration of the scenario scheme (see Figure 2 in the paper).</p> <p>5) omni_omni_measurements.csv: [401x2]: free space received power measurements (before and after the experiment) [dBm]</p> <p>6) average_radio_map_generation_example.m: matlab script example (generate radio maps with omnidirectional and directional antennas)</p>