The closure of a shallow tidal inlet promoted by infragravity waves

<p>This file describes the original data that were used to generate figures 1, 2 and 3 in the manuscript by Bertin et al. to be published in Geophysical Research Letters:</p> <p>Bertin, X., Mendes, D., Martins, K., Fortunato, A.B. and Lavaud, L., 2019. The closure of a shallow tidal inlet promoted by infragravity waves. In revision to Geophysical Research Letters.</p> <p>*<strong>ADCP1_Bulkparameters_Albufeira_201810.dat</strong></p> <p>This file includes the bulk parameters computed over 20&rsquo; samples at the ADCP1 that were used to generate figure 2. From left to right, each column corresponds to: date (yyyy mm dd) &nbsp;time (HH MM SS) Free surface elevation [m/MSL] H_m0,G[m] H_m0,IG[m] U_m[m/s] U₁₀[m/s] U₉₀[m/s] Q_s,IGW[kg/s/m&sup2;] Q_{s,tide only}[kg/s/m&sup2;]</p> <p>*<strong>ADCP1_2Hzdata_Albufeira_20181014.dat</strong></p> <p>&nbsp;This file includes the 20&rsquo; data sampled at 2Hz at the ADCP1 starting on the 14/10/2018 at 6h00. From left to right, each column corresponds to: date (yyyy mm dd) time (HH MM SS.S) water depth [m] alongstream currents [m/s] SSC [g/L].</p> <p>*<strong>PT3_Albufeira_201810.dat</strong></p> <p>This file includes the bulk parameters computed at PT3 based on 30&rsquo; samples and used to produce figure 2. From left to right, each column corresponds to: date (yyyy mm dd) time (HH MM SS.S) free surface elevation[m/MSL] Hm0,G[m] Hm0,IG[m].</p> <p><strong>*Topo_20181013_ ETRS89_MSL.dat</strong></p> <p>This file corresponds the topography measured on the 13/10/2018 and includes 3 columns: X, Y and Z. X and Y are horizontal coordinates in the datum ETRS89-PTTM06 and Z is the topography with respect to mean sea level.</p> <p><strong>*Topo_20181014_ ETRS89_MSL.dat</strong></p> <p>This file corresponds the topography measured on the 14/10/2018 and includes 3 columns: X, Y and Z. X and Y are horizontal coordinates in the datum ETRS89-PTTM06 and Z is the topography with respect to mean sea level.</p> <p>*<strong>Coord_Sensores_ ETRS89_MSL</strong>.dat</p> <p>This file corresponds the position of the ADCP1 and PT3 sensors used in this study and includes 3 columns: X, Y and Z. X and Y are horizontal coordinates in the datum ETRS89-PTTM06 and Z is the position of the pressure sensor with respect to mean sea level.</p>