Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

3,669

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

3,669 results for “Lasers”

Learn how ShareScore rates datasets ↗
zenodo40/100

Real-time Automatic Temperature Regulation During In Vivo MRI-guided Laser Induced Thermotherapy (MR-LITT)

<p>This dataset is associated with the article.</p> <p>For each example (in vitro/in vivo), two matrices are provided, each containing :</p> <p>- coefficients estimation curves ;</p> <p>- automatic regulation curves and recontructed data (thermometry, phase, module) of the MRI sequence.</p>

opencc-by-4.0Nov 2022View details →
zenodo40/100

Aerodynamic characterisation of porous fairings : pressure drop and Laser Doppler Velocimetry measurements

<p>Aviation has become a mass transportation industry, and all prospective studies foresee growth in this sector. Among the challenges, noise in the vicinity of airports has gone from a marginal annoyance to a real public health concern. To address this problem, as well as others such as fuel consumption, aircraft manufacturers are considering radically new aircraft architectures that could enter service quickly. In the meantime, however, the noise of traditional aircraft must be reduced significantly. Aircraft noise, during takeoff and landing, results primarily from a combination of (i) engine noise, which is generated by the fan and jet, and (ii) airframe noise, primarily due to the landing gear (LG) and high lift devices (HLD), the latter including slats and trailing edge flaps, which are deployed at low speeds to increase lift. During takeoff, engine noise remains dominant, while on approach and landing, engines operate at low speeds (typically 50% of N1), and airframe noise becomes a significant contributor, especially for newer aircraft equipped with latest generation turbofans. Its mitigation is therefore of primary interest.<br> However, due to the strong integration constraints imposed by other disciplines than acoustics on components such as LGs and HLDs, the development of noise reduction technologies (NRT) on these airframe components has been limited. This lack of breakthroughs is also due to the complexity of flow physics, and thus our still limited knowledge of airframe noise generation mechanisms. The noise of the landing gear, slats and flaps has been studied on a real and reduced scale, mainly on the basis of experimental means. The maturity of numerical simulations now allows to study the mechanisms of the noise sources on various complex configurations. Moreover, numerical simulation methods can be sufficiently accurate to predict the noise generated by such configurations. In order to take the next step in the maturity of numerical prediction, these NIRs must be accurately evaluated and modeled. Experimental data based on academic configurations are therefore needed to validate the new tools and numerical models. One promising NRT is the use of a fairing in front of the landing gear to reduce the noise of this system. The present study aims at collecting an experimental database (pressure drop and turbulence characteristics) of several fairing solutions in order to have validation test cases for CFD simulation and thus develop new models for such complex geometries. The fairing samples are thus tested on the &quot;Acoustic and Aerothermal Bench&quot; (B2A), by measuring the pressure drop of each sample and the flow field by Laser Doppler Velocimetry (LDV). The experimental methodology will be presented first. The database will then be described. Some technical validations will also be proposed on the basis of a comparison with the literature.</p>

opencc-by-4.0Sep 2022View details →
zenodo40/100

IODP Expedition 376 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroJul 2019View details →
zenodo40/100

Laser Response in ECAL Crystals in CMS Detector

<p>The dataset contains the Laser responses of&nbsp;the Lead-Tungstate crystals in the Electromagnetic Calorimeter (ECAL) of the CMS Experiment recorded during the Run 2 (2016-2018) of LHC running.&nbsp;The datasets&nbsp;consists of two tar folders: one corresponding to the &quot;plus&quot; side of the detector and one corresponding to the &quot;minus&quot; side. Each folder contains files in csv format, each file corresponding to the histories of all crystals in each&nbsp;&quot;ieta&quot; ring. The detailed description of the columns can be found under the section names &quot;dataset&quot; on Github pages&nbsp;at&nbsp;https://fair-umn.github.io/fair_ecal_monitoring.</p>

opencc-by-4.0Mar 2022View details →
zenodo40/100

Laser cooling a membrane-in-the-middle system close to the quantum ground state from room temperature

<p>This dataset contains processed data corresponding to the figures in the main text of our paper &quot;Laser cooling a membrane-in-the-middle system close to the quantum ground state from room temperature&quot;</p> <p>The dataset consists of 10 .csv files and&nbsp;a jupyter notebook for generating the figures in the main text.</p>

opencc-by-4.0Dec 2022View details →
zenodo40/100

IODP Expedition 385 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroSep 2021View details →
zenodo40/100

GMAW & WAAM Process monitoring using XARION Eta300 Ultra laser microphone

<p>Repository contains extra wide bandwidth acoustic process monitoring data of a stable and unstable gas metal arc welding (GMAW) process variant Fronius &quot;cold metal transfer&quot; (CMT) of G3Si1 steel wire, which is used for additive manufacturing. Additional Video acquisition of the welding process is provided.</p>

opencc-by-4.0Mar 2020View details →
zenodo40/100

IODP Expedition 396 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroApr 2023View details →
zenodo40/100

Predicting Pulsed Laser Deposition SrTiO3 Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction - sample treated_213nm

<p>RHEED intensity image dataset of sample &quot;<strong>treated_213nm&quot;</strong> in work &quot;Predicting Pulsed Laser Deposition SrTiO<sub>3 </sub>Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction.&quot;</p>

opencc-by-4.0Apr 2023View details →
zenodo40/100

IODP Expedition 354 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroSep 2016View details →
zenodo40/100

Datasets for Work "Predicting Pulsed-Laser Deposition SrTiO3 Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction"

<p>RHEED raw dataset and Gaussia fitting&nbsp;parameter dataset for&nbsp;samples &quot;treated_213nm&quot;, &quot;treated_81nm&quot; and &quot;untreated_162nm&quot;&nbsp;in&nbsp;the work &quot;Predicting Pulsed Laser Deposition SrTiO<sub>3 </sub>Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction.&quot;</p>

opencc-by-4.0May 2023View details →
zenodo40/100

Experimental Assessment of Laser Scarecrows for Reducing Avian Damage to Sweet Corn

<p>Datasets and metadata for analyses presented in an article &quot;Experimental Assessment of Laser Scarecrows for Reducing Avian Damage to Sweet Corn&quot; submitted to Pest Management Science, June 2023.</p>

opencc-by-4.0Jun 2023View details →
zenodo40/100

IODP Expedition 369 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroMay 2019View details →
dryad40/100

Data from: Leveraging a new branch-based taper curve and form factor from terrestrial laser scanning proxies

<p>Modeling branch taper curve and form factor contributes to increasing the efficiency of tree crown reconstruction: the branch taper, defined as the sequential measure of diameters along the course of the branch, is pivotal to accurately estimate key branch variables such as biomass and volume. Branch diameters or volumes have commonly been estimated from terrestrial laser scanning (TLS) based on automatized voxelization or cylinder-fitting approaches, given the whole branch length is sufficiently covered by laser reflections. The results are, however, often affected by ample variations in point cloud characteristics caused by varying point density, occlusions, and noise. As these characteristics of TLS have been difficult to be sufficiently controlled or eliminated in automatized-techniques, we proposed a new branch-based taper curve model and form factor (BFF), which can be employed directly from the laser reflections and under variable point cloud characteristics.</p> <p>In this paper, the approach is demonstrated on primary branches using a set of TLS-derived diameter datasets from a sample of 20 trees of 6 species. The result shows an improvement in the accuracy of the diameter estimates and, at best, enabled for predicting encompassing finer branch scales (&lt;10 cm), with R2 of 0.86 and a mean relative absolute error of 1.03 cm (29%) when validated with field-measured diameters. This approach was also capable of retrieving branch diameters for a large percentage of explicitly identified primary branches (&gt;85%) directly from the filtered points when validated with panoramic images acquired concurrently with laser scanning. Frequently used automatized crown reconstructions from the quantitative structural model (QSM), on the other hand, was largely obscured by discrepancies in the point clouds, with the crown-tops and finer branches being the most critical.</p> <p>Furthermore, our approach provides mean BFF of 0.35 and 0.49 with the diameters determined from 5% and 10% of the total branch length, respectively, which may have the potential to produce branch volume information with reasonable accuracy from only knowing the length and respective diameter.</p> <p>Although our model can be regarded as a first approximation to the taper curve and form factor for the primary branches on a relatively small set of samples, the approach can further our understanding of alternative ways to improve the accuracy of the assessment of branch diameter and volume. The approach may also be extended to other branch orders. This could expand the horizon for volumetric calculations and biomass estimates from non-destructive TLS proxies in tree crowns.</p>

opencc-zeroJul 2023View details →
zenodo40/100

Fig. 11. Confocal laser scanning 3D reconstructions. A in Living on the edge - first survey of loriciferans along the Atacama Trench

Fig. 11. Confocal laser scanning 3D reconstructions. A. Pliciloricus leocaudatus, ventral view, paratype (NHMD 100760). B. Pliciloricus aff. ukupachaensis collected off Oregon, US west coast, lateral view (NHMD 225904).

opencc-by-4.0Jul 2023View details →
zenodo40/100

Thermal evaporation as sample preparation for silver‐assisted laser desorption/ionization mass spectrometry imaging of cholesterol in amyloid tissues

<p><strong>Thermal evaporation as sample preparation </strong><strong>for </strong><strong>silver‐assisted laser desorption/ionization mass spectrometry imaging of cholesterol in amyloid tissues</strong></p> <p>MSI datasets in SCiLS Lab SL File (*.sl) or as&nbsp;flexImaging sequence (*.mis)</p>

opencc-by-4.0Jul 2023View details →
zenodo40/100

Broadband Laser-Induced Luminescence Generated in the Visible and Near-Infrared Ranges from Nontransparent CsPbCl3:Yb3+ Perovskite Ceramics

<p>ABSTRACT</p> <p>All inorganic perovskites with the general formula ABX<sub>3</sub> (A = alkaline cation, B = lead ions, and X = halide anion) in the form of colloids have become very popular in recent years due to their extraordinary spectroscopic properties, which can be additionally modulated by changing their structural composition. Here, we report for the first time a novel study considering nontransparent CsPbCl<sub>3</sub>:10%Yb<sup>3+</sup> ceramics that exhibit broadband laser-induced emission (LIE) with warm color (CRI = 96) upon exposure to a high-power-density infrared beam. It was found that the analyzed phenomenon strongly depends on the excitation power density and the pressure around the sample. Moreover, threshold behavior was observed, characterized by a significant increase in luminescence intensity already from the excitation of 0.2 W. The investigated material exhibits extremely strong photoconductivity. During the spectroscopic measurements of LIE, it was found that the current value varies by more than 4 orders of magnitude. Because of the relatively low sample temperature during the experiment, a LIE generation mechanism based on the creation of ytterbium mixed valence ion pairs and intervalence charge transfer (IVCT) transitions was proposed.</p>

opencc-by-4.0Jul 2023View details →
zenodo40/100

Dataset: vacuum-ultraviolet laser source for spectroscopy of trapped thorium ions

<p>This is a data set accompanying the publication &quot;Vacuum-ultraviolet laser source for spectroscopy of trapped thorium ions&quot; in the New Journal of Physics. https://doi.org/10.1088/1367-2630/aced1b</p>

opencc-by-4.0Aug 2023View details →
zenodo40/100

IODP Expedition 382 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroMay 2021View details →
zenodo40/100

IODP Expedition 392 Laser height profile (section half)

<p>Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.</p>

opencc-zeroAug 2023View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.