Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5,155
datasets available to search
ShareScore release 0.9.0
Dataset results
5,155 results for “resolution”
Remote Sensing VQA - High Resolution (RSVQA HR)
<p>Remote sensing images contain a wealth of information which can be useful for a wide range of tasks including land cover classification, object counting or detection. However, most of the available methodologies are task-specific, thus inhibiting generic and easy access to the information contained in remote sensing data. As a consequence, accurate remote sensing product generation still requires expert knowledge. With RSVQA, we propose a system to extract information from remote sensing data that is accessible to every user: we use questions formulated in natural language and use them to interact with the images. With the system, images can be queried to obtain high level information specific to the image content or relational dependencies between objects visible in the images. Using an automatic method, we built two datasets (using low and high resolution data) of image/question/answer triplets. The information required to build the questions and answers is queried from OpenStreetMap (OSM). The datasets can be used to train (when using supervised methods) and evaluate models to solve the RSVQA task.</p> <p>This page is about the high resolution dataset.</p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 5: 2020 - 2021) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7434396">https://zenodo.org/record/7434396</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 3: 2010 - 2014) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7432432">https://zenodo.org/record/7432432</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 4: 2015 - 2019) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7434447">https://zenodo.org/record/7434447</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 1: 2000 - 2004) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/6147830">https://zenodo.org/record/6147830</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 2: 2005 - 2009) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7434376">https://zenodo.org/record/7434376</a></p>
5D-NP-MATER_MDO - Open Dataset for "Novel, High-Resolution, Subtractive Photoresist Formulations for 3D Direct Laser Writing Based on Cyclic Ketene Acetals"
<p>This is the open dataset for the paper: "Marco Carlotti*, Omar Tricinci, Virgilio Mattoli*, Novel, High-Resolution, Subtractive Photoresist Formulations for 3D Direct Laser Writing based on Cyclic Ketene Acetals, Advanced Materials Technologies, On line (2022) [DOI: 10.1002/admt.202101590] "</p> <p>This include the Supplementary Information file ("SI.pdf") , all the source material used for the paper preparation and more. </p> <p>For each folder (sub-dataset) there is a corresponding readme file describing the content and including metadata.</p> <p> </p>
River network and hydro-geomorphological parameters at 1/12° resolution for global hydrological and climate studies
<p>Global scale river routing models (RRMs) are commonly used in a variety of studies, including studies on the impact of climate change on extreme flows (floods and droughts), water resources monitoring or large scale flood forecasting. Over the last two decades, the increasing number of observational datasets, mainly from satellite missions, and the increasing computing capacities, have allowed better performances of RRMs, namely by increasing their spatial resolution. The spatial resolution of a RRM corresponds to the spatial resolution of its river network, which provides flow direction of all grid cells. River networks may be derived at various spatial resolution by upscaling high resolution hydrography data.<br> This paper presents a new global scale river network at 1/12° derived from the MERIT-Hydro dataset. The river network is generated automatically using an adaptation of the Hierarchical Dominant River Tracing (DRT) algorithm, and its quality is assessed over the 70 largest basins of the world. Although this new river network may be used for a variety of hydrology-related studies, it is here provided with a set of hydro-geomorphological parameters at the same spatial resolution. These parameters are derived during the generation of the river network and are based on the same high resolution dataset, so that the consistency between the river network and the parameters is ensured. The set of parameters includes a description of river stretches (length, slope, width, roughness, bankfull depth), floodplains (roughness, sub-grid topography) and aquifers (transmissivity, porosity, sub-grid topography).<br> The new river network and parameters are assessed by comparing the performances of two global scale simulations with the CTRIP model, one with the current spatial resolution (1/2°) and the other with the new spatial resolution (1/12°). It is shown that CTRIP at 1/12° overall outperforms CTRIP at 1/2°, demonstrating the added value of the spatial resolution increase.<br> The new river network and the consistent hydro-geomorphology parameters may be useful for the scientific community, especially for hydrology and hydro-geology modelling, water resources monitoring or climate studies.</p>
High resolution soil moisture and soil temperature data during Hurricane Florence, 2018, over the Carolina region (U.S.)
<p>We set the study domain over the U.S. east coast to cover the Carolinas and the regions that were affected by Hurricane Florence. Therefore, the selected domain covered the area between -86º to -75º longitude and 30º to 40º latitude. We should note that Hurricane Florence made landfall in the Carolinas on September 14, 2018, as a Category 1 storm. Hurricane reports indicate that “Hurricane Florence made landfall near Wrightsville Beach, North Carolina at 7:15 AM EDT (1115 UTC) on September 14 with estimated maximum winds of 90 mph (150 km/h), and a minimum central pressure estimate of 958 millibars. Winds gusts topping 105 mph (169 km/h) were reported in the Outer Banks of North Carolina.” Rainfall from Florence, as per the initial reports, suggest possible new records for North Carolina (breaking the record set by Hurricane Floyd in 1999).</p> <p>we used the latest development of the high-resolution land surface assimilation system (HRLDAS) that was retrieved from the Github repository (<a href="https://github.com/NCAR/hrldas-release">https://github.com/NCAR/hrldas-release</a>). The model was coupled to the Noah land surface modeling system and used the multi-layer soil model, complex canopy resistance with the Penman method for calculating evapotranspiration, and frozen ground physics for the simulations.</p> <p> The atmospheric forcing including 2-meter air temperature, shortwave, and long-wave radiation, 2-meter wind speed, 2-meter specific humidity, and surface pressure data was obtained from the NCEP-DOE Reanalysis 2 (available from <a href="https://psl.noaa.gov/data/gridded/data.ncep.reanalysis2.html">psl.noaa.gov/data/gridded/data.ncep.reanalysis2.html</a>). For the precipitation, we used the high-resolution GCIP/EOP surface precipitation NCEP/EMC gridded data (Stage IV) with 4 km of grid spacing. All the forcing data have been retrieved at an hourly frequency from 2016 to 2019. The model was configured with the initial soil moisture and soil temperature conditions at 4 depths (0-10, 10-40, 40-100, 100-200 cm), retrieved from the NCEP data. Other initialization fields including skin temperature and water equivalent snow depth were retrieved from NCEP. The NCEP reanalysis data, however, does not provide “plant canopy surface water” data which is required as an initialization field. This data was retrieved from the NLDAS dataset. The first two years of the model run (2016 and 2017) were considered as the spin-up, and the outcome during 2018 was used for further analysis and public release.</p>
ERA5-Land weekly: Surface temperature, weekly time series for Europe at 1 km resolution (2016 - 2020)
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Surface temperature:<br> Temperature of the surface of the Earth. The skin temperature is the theoretical temperature that is required to satisfy the surface energy balance. It represents the temperature of the uppermost surface layer, which has no heat capacity and so can respond instantaneously to changes in surface fluxes.</p> <p>Processing steps:<br> The original hourly ERA5-Land data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (https://chelsa-climate.org/). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>The spatially enhanced daily ERA5-Land data has been aggregated on a weekly basis (starting from Saturday) for the time period 2016 - 2020. Data available is the weekly average of daily averages, the weekly minimum of daily minima and the weekly maximum of daily maxima of surface temperature.</p> <p>File naming:<br> Average of daily average: <code>era5_land_ts_avg_weekly_YYYY_MM_DD.tif</code><br> Max of daily max: <code>era5_land_ts_max_weekly_YYYY_MM_DD.tif</code><br> Min of daily min: <code>era5_land_ts_min_weekly_YYYY_MM_DD.tif</code></p> <p>The date in the file name determines the start day of the week (Saturday).</p> <p>Pixel values:<br> °C * 10 Example: Value 302 = 30.2 °C</p> <p>The QML or SLD style files can be used for visualization of the temperature layers.</p> <p>Coordinate reference system:<br> ETRS89 / LAEA Europe (EPSG:3035) (EPSG:3035)</p> <p>Spatial extent:<br> north: 82N<br> south: 18S<br> west: -32W<br> east: 61E</p> <p>Spatial resolution:<br> 1 km</p> <p>Temporal resolution:<br> weekly</p> <p>Time period:<br> 01/01/2016 - 12/31/2020</p> <p>Format: GeoTIFF</p> <p>Representation type: Grid</p> <p>Software used:<br> GRASS 8.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf">https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Other resources:<br> https://data.mundialis.de/geonetwork/srv/eng/catalog.search#/metadata/601ea08c-0768-4af3-a8fa-7da25fb9125b</p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Contact:<br> mundialis GmbH & Co. KG, info@mundialis.de</p>
ERA5-Land weekly: Air temperature at 2 meter above surface, weekly time series for Europe at 1 km resolution (2016 - 2020)
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Air temperature (2 m):<br> Temperature of air at 2m above the surface of land, sea or in-land waters. 2m temperature is calculated by interpolating between the lowest model level and the Earth's surface, taking account of the atmospheric conditions.</p> <p>Processing steps:<br> The original hourly ERA5-Land data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (https://chelsa-climate.org/). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>The spatially enhanced daily ERA5-Land data has been aggregated on a weekly basis starting from Saturday for the time period 2016 - 2020.<br> Data available is the weekly average of daily averages, the weekly minimum of daily minima and the weekly maximum of daily maxima of air temperature (2 m).</p> <p>File naming:<br> Average of daily average: <code>era5_land_t2m_avg_weekly_YYYY_MM_DD.tif</code><br> Max of daily max: <code>era5_land_t2m_max_weekly_YYYY_MM_DD.tif</code><br> Min of daily min: <code>era5_land_t2m_min_weekly_YYYY_MM_DD.tif</code></p> <p>The date in the file name determines the start day of the week (Saturday).</p> <p>Pixel value:<br> °C * 10<br> Example: Value 44 = 4.4 °C</p> <p>The QML or SLD style files can be used for visualization of the temperature layers.</p> <p>Coordinate reference system:<br> ETRS89 / LAEA Europe (EPSG:3035) (EPSG:3035)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 1km</p> <p>Temporal resolution:<br> weekly</p> <p>Time period:<br> 01/01/2016 - 12/31/2020</p> <p>Format: GeoTIFF</p> <p>Representation type: Grid</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0 (r.resamp.stats -w; r.relief)</p> <p>Lineage:<br> Dataset has been processed from original Copernicus Climate Data Store (ERA5-Land) data sources. As auxiliary data CHELSA climate data has been used.</p> <p>Original ERA5-Land dataset license:<br> <a href="https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf">https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Other resources:<br> <a href="https://data.mundialis.de/geonetwork/srv/eng/catalog.search#/metadata/601ea08c-0768-4af3-a8fa-7da25fb9125b">https://data.mundialis.de/geonetwork/srv/eng/catalog.search#/metadata/601ea08c-0768-4af3-a8fa-7da25fb9125b</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Contact:<br> mundialis GmbH & Co. KG, info@mundialis.de</p>
BRAVES database Version 1.1 (REVISED): multispecies and high spatiotemporal resolution database of vehicular emissions in Brazil.
<p>The BRAzilian Vehicular Emissions inventory Software (BRAVES) database is a multispecies and high spatiotemporal resolution database of vehicular emissions in Brazil. We provide this database using a spatial disaggregation based on road density, temporal disaggregation using vehicular flow profiles, and chemical speciation based on SPECIATE database from the United States Environmental Protection Agency. We provide netCDF files with spatial resolution of 0.05x0.05 and annual emissions from 2013 to 2019. Files are divided by vehicle type (light, commercial-light, motorcycles, and heavy). We also provide the total vehicular emissions (sum of emissions from all vehicle types). The database contains emissions of 41 chemical species, such as ACET, ACROLEIN, ALD2, BENZ, BUTADIENE13, CH4, CO, CO2, ETH, ETHA, ETHY, ETOH, FORM, ISO, N2O, NAPH, NO, NO2, PAL, PCA, PCL, PEC, PFE, PK, coarse mode primary PM (PMC), PMG, PMN, unspeciated PM2.5 (PMOTHR), PNA, PNH4, PNO3, POC, PRPA, PSI, PSO4, PTI, SO2, TERP, TOL, VOC, and XYLMN. Codes from BRAVES are available by registering at <a href="https://hoinaski.prof.ufsc.br/BRAVES/">https://hoinaski.prof.ufsc.br/BRAVES/</a> and <a href="https://github.com/leohoinaski/BRAVES">https://github.com/leohoinaski/BRAVES</a>, where users can access instructions to run the database and download the input files.</p> <p>In this updated version from the first BRAVES database version, we have preserved estimates of ETOH and RCHO from CETESB. Brazil has a unique chemical signature of the chemical composition due to the biofuels (27% of gasoline is ethanol and 7% of diesel is bio-diesel). The emissions of C2H4O (ALD2), CH2O (FORM), and C3H6O (ACET) have been derived from RCHO emissions. We have used US-EPA Speciate to speciate compounds only when local emission factors of RCHO and ETOH are not available, such as in the case of motorcycles and heavy vehicles.</p> <p>We have also included emissions of PM2.5 (PMFINE), speciating coarse PM emissions from brake and tires (40%), road wear (53%), road dust resuspension (17%), and exhaust emissions (100%). Pixel center coordinates (longitude, latitude), pixel area (AREA), and pixel local time zone (LTZ) shift from UTC has been added to the netCDF files.</p> <p>This database has been currently part of the preprint currently under review for the journal ESSD (https://doi.org/10.5194/essd-2022-74).</p> <p> </p> <p>Files description:</p> <p>BRAVESdatabaseAnnual_BR_(typeEmiss)_(Vehicle Type)_(resolution)_(year).nc - Annual emissions in Brazil by vehicle type and 0.05x0.05 degree of resolution.</p> <p>Domain:</p> <p>lati = -36 #(Brazil) #lati = int(round(bound.miny)) # Initial latitude</p> <p>latf = 8 #(Brazil) #latf = int(round(bound.maxy)) # Final latitude</p> <p>loni = -76 #(Brazil) #loni = int(round(bound.minx)) # Initial longitude</p> <p>lonf = -32 #(Brazil) #lonf = int(round(bound.maxx)) # Final longitude</p> <p>deltaX = 0.05 # Grid resolution/spacing in x direction</p> <p>deltaY = 0.05 # Grig resolution/spacing in y direction</p> <p> </p> <p>typeEmiss:</p> <p>'TOTAL' = Total emissions/sum of emissions types<br> 'Exhaust' = Only exhaust emissions<br> 'non-exaust' = Only non-exhaust emissions<br> 'non-exaustMP' = Only Particulate Matter non-exhaust emissions<br> 'non-exaustMP_no_resusp'= Only Particulate Matter non-exhaust emission excluding road resuspension </p>
Auxiliary Euro-Calliope datasets: QTDIAN storyline-specific spatial data to represent a European energy system model at several spatial resolutions
<p>Custom output generated with the <a href="https://github.com/brynpickering/possibility-for-electricity-autarky/tree/custom-regions">custom-region possibility-for-electricity-autarky</a> workflow.</p> <p>This output provides similar data to <a href="https://zenodo.org/record/6600619">https://zenodo.org/record/6600619</a> (technically eligible land area for renewables and other spatially disaggregated energy system data), but with three additional land area scenarios.</p> <p>These scenarios are in line with three storylines from the <a href="https://zenodo.org/record/5834010">QTDIAN toolbox</a> and are based on updating the `possibility-for-electricity-autarky` workflow configuration to include the following parameters (also included in `config.yaml`):</p> <p> </p> <pre><code> scenarios: people-powered: use-of-protected areas: false pv-on-farmland: true share-farmland-used: 0.2 # agro pv share-forest-areas-used: 0.1 share-other-land-used: 1.0 share-offshore-used: 0.1 share-rooftop-used: 1.0 government-directed: use-of-protected areas: false pv-on-farmland: true share-farmland-used: 1.0 share-forest-areas-used: 0.1 share-other-land-used: 1.0 share-offshore-used: 1.0 share-rooftop-used: 1.0 market-driven: use-of-protected areas: true pv-on-farmland: true share-farmland-used: 1.0 share-forest-areas-used: 1.0 share-other-land-used: 1.0 share-offshore-used: 1.0 share-rooftop-used: 1.0</code></pre> <p> </p> <p>This dataset includes different spatial resolutions of land availability. For more information on the `ehighways` resolution, see <a href="https://zenodo.org/record/6600619">https://zenodo.org/record/6600619</a>.</p> <p>This dataset is used as an input to the <a href="https://github.com/calliope-project/sector-coupled-euro-calliope">Sector-Coupled Euro-Calliope workflow</a>.</p> <p> </p>
Toward a base-resolution panorama of the in vivo impact of cytosine methylation on transcription factor binding
<p>TF binding models built by JAMS (https://github.com/csglab/JAMS), ChIP-seq peak files (from ENCODE, Najafabadi et al. 2015, Schmitges et al. 2016, and Imbeault et al. 2017; called by MACS 1.4v), ChIP-seq pulldown and control tags from said peaks, input data for JAMS, and RCADE2 motifs for C2H2 zinc finger proteins. </p>
CRIRES high-resolution near-infrared spectroscopy of diffuse interstellar band profiles
<p>This archive contains data used for the paper:</p> <p>CRIRES high-resolution near-infrared spectroscopy of diffuse interstellar band profiles. Detection of 12 new DIBs in the YJ band and the introduction of a combined ISM sight line and stellar analysis approach</p> <p>Paper-DOI: 10.1051/0004-6361/202142990</p> <p>It contains reduced oCRIRES spectra. For more details on the reduction see the paper.</p>
Dataset of polygons with the contour of 900 juniper shrubs used to track shrub growth from 1977 to 2020 in Sierra Nevada (Spain) using very high resolution aerial and satellite RGB images.
<p><strong>This database provides as polygons the contours of 900 juniper shrubs (<em>Juniperus communis L.</em> and <em>Juniperus sabina L.</em>) along 5 decades (years 1977, 1984, 2001, 2010 and 2020). The contour of each of 900 shrubs manually mapped using the Google Satellite composite for the year 2020) was tracked back in time using orthophotos provided by REDIAM. Contours were obtained by manual annotation as polygon shapefiles in QGIS 3.10.3. Additionally, for the year 2020, the polygons were characterized with five attributes that gather ecological information: Morphotype (Hemispherical, Striped, Senescent, With rock), Presence of surrounding vegetation (Bare Soil, Surrounding Vegetation), Presence of nearby human land-uses (Surrounded by human facilities within 250 meters, Non-anthropized environment) Health status (as percentage of canopy cover with brown foliage: values between 0-5, where 0 corresponds to 100% photosynthetically active cover, decreasing the photosynthetically active cover until category 5 which corresponds to 100% damaged cover), and the subjective annotation certainty of the GIS technician (values between 0-5, where the value 0 corresponds to a very uncertain annotation up to the value 5 which corresponds to a fairly certain annotation). </strong></p>
Data and script: Reduced enumeration effort, but not coarse taxonomic resolution, is sufficient to represent beta diversity patterns of stream benthic diatoms
<p>This is a dataset on benthic diatom communities sampled in 90 riffles (the local communities) within nine near-pristine subtropical streams (each stream represented a metacommunity) in southeast subtropical Brazil. </p> <p>In addition to the dataset, we also provide the R code used to investigate whether reduced enumeration efforts (i.e., subsets of counted valves per sample) and the identification to the genus level are sufficient to recover patterns in the species composition and in beta diversity of benthic diatom metacommunities.</p>
High-resolution maps of material stock and population in Germany from 1985 to 2018
<p>Global societal material stocks such as buildings and infrastructure accumulated rapidly within recent decades, along with population growth. Material stocks constitute the physical basis of most socio-economic activities and services, such as mobility, housing, health, or education. The dynamics of stock growth, and its relation to the population that demands those services, is an essential indicator for long-term societal resource use and patterns of emissions. The creation of societal material stock creates path dependencies for future resource use, with an important impact on how the transformation towards sustainable societies can succeed.</p> <p>This dataset features detailed maps of material stock and population for Germany on a 30m grid. The data is based on recent maps of material stock and building volume (compare to Haberl et al. 2021, doi: 10.1021/acs.est.0c05642), recent and historic census data, and a time series of Landsat TM, ETM+, and OLI Earth Observation data.</p> <p><strong>Temporal extent</strong></p> <p>The data contains annual maps from 1985 to 2018.</p> <p><strong>Data format and units</strong></p> <p>Per German federal state, the data come in tiles of 30x30km. The projection is EPSG:3035. The images are compressed GeoTiff files (*.tif). There is a mosaic in GDAL Virtual format (*.vrt), which can readily be opened in most Geographic Information Systems. Please consider the generation of image pyramids before using *.vrt files.</p> <p>All image data has 34 bands, where band 1 is data for 1985, and band 34 is data for 2018.</p> <p>The dataset features</p> <ul> <li>population (Scaled by 100 to reduce data storage size. Divide by 100 to get people per cell)</li> <li>mass (in tons) of … <ul> <li>total material stock <ul> <li>… material stock in buildings <ul> <li>… in commercial and industrial buildings</li> <li>… in multi-family residential buildings</li> <li>… in single-family residential buildings</li> <li>… in high-rise buildings</li> <li>… in lightweight buildings</li> </ul> </li> <li>… material stock in road infrastructure</li> <li>… material stock in rail infrastructure</li> <li>… material stock in other infrastructure</li> </ul> </li> </ul> </li> </ul> <p>Material stock in high-rise and lightweight buildings is not featured in the corresponding publication due to its overall negligible amount. It is, however, included here for completeness.</p> <p><strong>Further information</strong></p> <p>For further information, please see the publication or contact Franz Schug (fschug@wisc.edu). Visit our website to learn more about our project MAT_STOCKS - Understanding the Role of Material Stock Patterns for the Transformation to a Sustainable Society.</p> <p><strong>Corresponding publication</strong></p> <p>Schug, F., Frantz, D., Wiedenhofer, D., Virág, D., Haberl, H., van der Linden, S., Hostert, P. (in rev.): High-resolution mapping of 33 years of material stock and population growth in Germany. Journal of Industrial Ecology</p> <p><strong>Funding</strong></p> <p>This research was funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (MAT_STOCKS, grant agreement No 741950).</p> <p> </p>
MODIS NDVI and EVI, 16-day time series for Europe at 1 km resolution
<p>Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI) from MODIS data for Europe at 1 km resolution.</p> <p>Source data:<br> - MODIS/Terra Vegetation Indices 16-Day L3 Global 500 m SIN Grid (MOD13A1 v006): https://lpdaac.usgs.gov/products/mod13a1v006/<br> - MODIS/Aqua Vegetation Indices 16-Day L3 Global 500 m SIN Grid (MYD13A1 v006): https://lpdaac.usgs.gov/products/myd13a1v006/</p> <p><br> The MOD/MYD13A1 Version 6 product provide Vegetation Index (VI) values at a per pixel basis at 500 meter (m) spatial resolution. There are two primary vegetation layers. The first is the Normalized Difference Vegetation Index (NDVI), which is referred to as the continuity index to the existing National Oceanic and Atmospheric Administration-Advanced Very High Resolution Radiometer (NOAA-AVHRR) derived NDVI. The second vegetation layer is the Enhanced Vegetation Index (EVI), which has improved sensitivity over high biomass regions. The algorithm for this product chooses the best available pixel value from all the acquisitions from the 16 day period. The criteria used is low clouds, low view angle, and the highest NDVI/EVI value.</p> <p>For the time periods October 2016 - March 2017 and August 2020 - April 2021, the original data has been reprojected to ETRS89-extended / LAEA Europe and aggregated to a 1 km grid. The temporal resolution is 16 days. Bad quality pixels or pixels with snow/ice and/or cloud cover have been masked using the provided quality assurance (QA) layers and appear as "no data".</p> <p>File naming:<br> productCode.acquisitionDate[A (YYYYDDD)]_mosaic_spatialResolution_frequency_VI.tif<br> example: MOD13A1.A2020305_mosaic_1000m_16_days_NDVI.tif</p> <p>The date is Year and Day of Year.</p> <p>Values are NDVI/EVI * 10000. Example: Value 6473 = 0.6473</p> <p>Projection + EPSG code:<br> ETRS89 / LAEA Europe (EPSG:3035) (EPSG: 3035)</p> <p>Spatial extent:<br> north: 72N<br> south: 30S<br> west: -52W<br> east: 49E</p> <p>Spatial resolution:<br> 1 km</p> <p>Temporal resolution:<br> 16 days</p> <p>Pixel values:<br> NDVI/EVI * 10000 (scaled to Integer; example: value 6473 = 0.6473)</p> <p>Software used:<br> GRASS GIS 8.0</p> <p>Original dataset license:<br> All data products distributed by NASA's Land Processes Distributed Active Archive Center (LP DAAC) are available at no charge. The LP DAAC requests that any author using NASA data products in their work provide credit for the data, and any assistance provided by the LP DAAC, in the data section of the paper, the acknowledgement section, and/or as a reference. The recommended citation for each data product is available on its Digital Object Identifier (DOI) Landing page, which can be accessed through the Search Data Catalog interface. For more information see: https://lpdaac.usgs.gov/products/myd13a1v006/</p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p>
MODIS MNDWI, 8-day time series for Europe at 1 km resolution
<p>Modified Normalized Difference Water Index (MNDWI) from MODIS data for Europe at 1 km resolution.</p> <p>Source data:<br> - MODIS/Terra Surface Reflectance 8-Day L3 Global 500 m SIN Grid (MOD09A1 v006): https://lpdaac.usgs.gov/products/mod09a1v006/</p> <p>The corresponding MODIS/Aqua product (MYD09A1 v006) could not be used due to the fact that the Aqua satellite has a number of broken detectors resulting in unreliable data for band 6 (SWIR) measurements.</p> <p>The Moderate Resolution Imaging Spectroradiometer (MODIS) Terra MOD09A1 Version 6 product provides an estimate of the surface spectral reflectance of Terra MODIS Bands 1 through 7 corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Along with the seven 500 meter (m) reflectance bands are two quality layers and four observation bands. For each pixel, a value is selected from all the acquisitions within the 8-day composite period. The criteria for the pixel choice include cloud and solar zenith. When several acquisitions meet the criteria the pixel with the minimum channel 3 (blue) value is used.</p> <p>For the time periods October 2016 - March 2017 and August 2020 - April 2021, the original data has been reprojected to ETRS89-extended / LAEA Europe and aggregated to a 1 km grid. The temporal resolution is 8 days. Bad quality pixels (cloud, cloud shadow, dead detector, solar zenith angle too large, etc.) have been masked using the provided quality assurance (QA) layers and appear as "no data".</p> <p>File naming:<br> productCode.acquisitionDate[A (YYYYDDD)]_mosaic_spatialResolution_frequency_VI.tif<br> example: MOD09A1.A2016353_mosaic_1000m_8_days_MNDWI.tif</p> <p>The date is Year and Day of Year.</p> <p>Values are MNDWI * 10000. Example: Value -5099 = -0.5099</p> <p>Projection + EPSG code:<br> ETRS89 / LAEA Europe (EPSG:3035) (EPSG:3035)</p> <p>Spatial extent:<br> north: 72N<br> south: 30S<br> west: -52W<br> east: 49E</p> <p>Spatial resolution:<br> 1 km</p> <p>Temporal resolution:<br> 8 days</p> <p>Pixel values:<br> MNDWI * 10000 (scaled to Integer; example: value -5099 = -0.5099)</p> <p>Software used:<br> GRASS GIS 8.0</p> <p>Original dataset license:<br> All data products distributed by NASA's Land Processes Distributed Active Archive Center (LP DAAC) are available at no charge. The LP DAAC requests that any author using NASA data products in their work provide credit for the data, and any assistance provided by the LP DAAC, in the data section of the paper, the acknowledgement section, and/or as a reference. The recommended citation for each data product is available on its Digital Object Identifier (DOI) Landing page, which can be accessed through the Search Data Catalog interface. For more information see: https://lpdaac.usgs.gov/products/mod09a1v006/</p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.