Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
19,365
datasets available to search
ShareScore release 0.9.0
Dataset results
19,365 results for “watering”
Figure 1 in Description of two new species of Neotachidius Shen & Tai, 1963 (Copepoda, Harpacticoida, Tachidiidae) from Korean brackish waters and proposal of a new genus for Tachidius (Tachidius) vicinospinalis Shen & Tai, 1964
Figure 1. Neotachidius coreanus sp. nov. (♀). A, habitus, dorsal; B, urosome (excluding P5-bearing somite), ventral.
Data for "In situ investigation of water on MXene interfaces"
<p>The dataset is used to analyze the results and findings in the paper.</p>
Stand-level variation drives canopy water storage by non-vascular epiphytes across a temperate-boreal ecotone
<p>Epiphytes, including bryophytes and lichens, can significantly change the water interception and storage capacities of forest canopies. However, despite some understanding of this role, empirical evaluations of canopy and bole community water storage capacity by epiphytes are still quite limited. Epiphyte communities are shaped by both microclimate and host plant identity, and so the canopy and bole community storage capacity might also be expected to vary across similar spatial scales. We estimated canopy and bole community cover and biomass of bryophytes and lichens from ground-based surveys across a temperate-boreal ecotone in continental North America (Minnesota). Multiple forest types were studied at each site, to separate stand level and latitudinal effects. Biomass was converted into potential canopy and bole community storage on the basis of water-holding capacity measurements of dominant taxa. Bole biomass and potential water storage was a much larger contributor than outer canopy. Biomass and water storage capacity varied greatly, ranging from 9 to &gt;900kg ha<sup>–1</sup> and 0.003 to 0.38 mm, respectively. These values are lower than most reported results for temperate forests, which have emphasized coastal and old-growth forests. Variation was greatest within sites and appeared to reflect the strong effects of host tree identity on epiphyte communities, with conifer-dominated plots hosting more lichen-dominated epiphyte communities with lower potential water storage capacity. These results point to the challenges of estimating and incorporating epiphyte contributions to canopy hydrology from stand metrics. Further work is also needed to improve estimates of canopy epiphytes, including crustose lichens.</p>
Benthic Haploniscidae (Isopoda) from Icelandic waters
<p>This dataset contains samples of Haploniscidae Hansen, 1916 (Isopoda, Crustacea) which were collected around Iceland from 1992- 2020. All samples were obtained from depths between 24 m and 2750 m.</p> <p>Sampling was conducted during five different projects: BIOICE (Benthic invertebrates of Icelandic waters), IceGE (Icelandic marine Animals: Genetics and Ecology), IceAGE 2 (Icelandic marine Animals: Genetics and Ecology 2), IceAGE RR (Icelandic marine Animals: Genetics and Ecology Reykjanes Ridge) and IceAEGE 3 (Icelandic marine Animals: Genetics and Ecology 3). During the cruises, animals were caught using detritus sledges, triangle dredges, Agassiz trawls or by EBS (Epi benthic sledge).</p> <p>Three Haploniscidae genera are included in the dataset. <em>Antennuloniscus</em> Menzies, 1962 and <em>Chauliodoniscus</em> Lincoln, 1985 were represented by one species each while <em>Haploniscus </em>Richardson, 1908 was present with ten species.</p>
Baliles Center (Hull Springs) Aimes Creek water depth data from 2021-10-19 to 2019-11-11
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek water depth data from 2021-05-04 to 2021-10-30
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Data and codes related to the article: Renard et al. A Hidden Climate Indices Modeling Framework for Multi-Variable Space-Time Data. Water Resources Research.
<p>This package contains data and codes related to the article:</p> <p>B. Renard, M. Thyer, D. McInerney, D. Kavetski, M. Leonard and S. Westra. A Hidden Climate Indices Modeling Framework for Multi-Variable Space-Time Data. <em>Water Resources Research</em>.</p> <p><strong>R scripts</strong></p> <p>The main computations of the paper have been performed using a computing code named <a href="https://github.com/STooDs-tools">STooDs</a>, which is called using the bash script launchpad.sh.</p> <p>The R scripts in this package only perform pre-processing (create configuration files) and post-processing (analyze results) steps.</p> <ul> <li>Funk.R: a set of functions called by other scripts.</li> <li>1_defineModel.R: define the model to be inferred and create STooDs configuration files in <em>dataset_XXX/runs.</em></li> <li>2_analyzeResults.R: analyze the outputs of STooDs runs.</li> <li>3_crossValidation.R: analyze the outputs of cross-validation experiments in <em>dataset_XV</em> and <em>dataset_XV_1971-1990</em>.</li> </ul> <p><strong>Data</strong></p> <p>Data for the 3 cases (full dataset and 2 cross-validation experiments) are located in folders <em>dataset_XXX/data</em>.</p> <ul> <li>dat.txt: raw dataset in text format.</li> <li>dataset.RData: dataset in RData format.</li> <li>DMI.txt, NINO.txt, SAM.txt: 3 standard climate indices.</li> <li>spaceP.txt, spaceQ.txt, spaceT.txt: properties of Precipitation (P), Streamflow (Q) and Temperature (T) stations.</li> <li>[only for cross-validation experiments] validation.RData: left-out data used for validation.</li> </ul> <p> </p> <p> </p>
Fig. 2 in First Record of Hemichela nanhaiensis (Pycnogonida: Ammotheidae) from Japanese Waters, with the First Description of Females
Fig. 2. Hemichela nanhaiensis Wang et al., 2015, female (ICHUM-5438): A, trunk, dorsal view (arrow, tiny lateral outgrowth bearing distal spinules); B, trunk, lateral view (arrow, dorsodistal tubercle); C, ocular tubercle, front view; D, chela; E, palp (arrow, outer swelling); F, oviger; G, leg 3.
Fig. 1 in First Record of Hemichela nanhaiensis (Pycnogonida: Ammotheidae) from Japanese Waters, with the First Description of Females
Fig. 1. Hemichela nanhaiensis Wang et al., 2015, male (ICHUM-5437): A, trunk, dorsal view (arrow, tiny lateral outgrowth bearing distal spinules); B, trunk, lateral view (arrow, dorsodistal tubercle); C, tiny lateral outgrowth bearing distal spinules; D, ocular tubercle, front view; E, chela; F, palp (arrow, outer swelling); G, oviger (arrow, proximal reversed spine); H, leg 3.
Fig. 5 in First Specimen-based Record of Ammolabrus dicrus (Perciformes: Labridae) from Japanese Waters, with Notes on Morphological Ontogenetic Changes and Geographic Variation
Fig. 5. Semi-schematic illustration of head of Ammolabrus dicrus, showing positions of cephalic sensory canals (KAUM–I. 99313, 21.4 mm SL). Scale bar 1 mm.
Fig. 4 in First Specimen-based Record of Ammolabrus dicrus (Perciformes: Labridae) from Japanese Waters, with Notes on Morphological Ontogenetic Changes and Geographic Variation
Fig. 4. Relationships of (A) number of gill rakers, (B) body depth, (C) caudal-peduncle length, and (D) orbit diameter to SL in Japanese (stars) and Hawaiian (circles) specimens of Ammolabrus dicrus. Open circle indicates holotype.
Fig. 2 in First Specimen-based Record of Ammolabrus dicrus (Perciformes: Labridae) from Japanese Waters, with Notes on Morphological Ontogenetic Changes and Geographic Variation
Fig. 2. Ammolabrus dicrus from Taketomi Island, Yaeyama Islands, Ryukyu Islands, Japan. A, specimen photograph (KAUM–I. 99314, 18.4 mm SL); B, underwater photograph of same individual as in A, 12 m; photo by T. Uchida.
Fig. 1 in First Specimen-based Record of Ammolabrus dicrus (Perciformes: Labridae) from Japanese Waters, with Notes on Morphological Ontogenetic Changes and Geographic Variation
Fig. 1. Underwater photograph of a small school of Ammolabrus dicrus at a depth of 12 m off Taketomi Island, Yaeyama Islands, Ryukyu Islands, Japan; photo by K. Sodo.
Fig. 22 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 22. Dicyemodeca kukii sp. nov., photographs of syntype specimens on slide NSMT-Me-57: a–c, nematogen, anterior region; d, e, rhombogen, anterior region; f, vermiform embryos within axial cell; g, infusorigen; h, i, infusoriform embryos, horizontal section (h), sagittal section (i). Scale bars: 10 µm.
Fig. 25 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 25. Possible adhering processes of juvenile vermiform individuals of Dicyemennea leptocephalum; (a) juvenile individuals attached to the surface of the renal appendage by their calottes; (b) the calottes expand to be close to nearby calotte of individuals one another; (c) the calottes are adhering to one another.
Fig. 18 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 18. Dicyemennea desmocephalum sp. nov., photographs of syntype specimens on slide NSMT-Me-55: a, c, d, nematogen, entire, note that individuals adhere together with calottes (a), (c); b, g, rhombogen, entire, note that individuals adhere together with calottes (b); anterior region; e, vermiform embryos within axial cell; f, young nematgen, entire; f, h, infusorigen; i, j, infusoriform embryos, horizontal section (i), sagittal section (j). Scale bars: 20 µm in a–e, 10 µm in e, f, h–j.
Fig. 16 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 16. Dicyemennea moritakii sp. nov., photographs of syntype specimens on slide NSMT-Me-54: a, b, nematogen, anterior region; c, vermiform embryos within axial cell; d, e, rhombogen, anterior region; f, infusorigen; g, h, infusoriform embryos, horizontal section (g), sagittal section (h). Scale bars: 20 µm in a–e, 10 µm in f–h.
Fig. 15 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 15. Dicyemennea leptocephalum sp. nov., drawn from syntype specimens on slide NSMT-Me-53: a, nematogen, entire; b–d, rhombogen, entire; e, nematogen, anterior region; f, g, vermiform embryo within axial cell, cilia omitted (f), optical section (g); h, infusorigen; i–k, infusoriform embryos, dorsal view (i; cilia omitted), ventral view (j; cilia omitted), sagittal section (k). Scale bars: 100 µm in a–d, 50 µm in e, 10 µm in f–k.
Fig. 21 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 21. Dicyemennea tobaense sp. nov., drawn from syntype specimens on slide NSMT-Me-56: a, nematogen, entire; b, rhombogen, entire; c, d, nematogen, anterior region; e, rhombogen, anterior region; f, g, vermiform embryo within axial cell, cilia omitted (f), optical section (g); h, infusorigen; i–k, infusoriform embryos, dorsal view (i; cilia omitted), ventral view (j; cilia omitted), sagittal section (k). Scale bars: 100 µm in a, b, 10 µm in c–k.
Fig. 12 in Eleven New Species of Dicyemids (Phylum Dicyemida) from Octopus longispadiceus and O. tenuicirrus (Mollusca: Cephalopoda: Octopoda) in Japanese Waters
Fig. 12. Dicyemennea megalosomum sp. nov., photographs of syntype specimens on slide NSMT-Me-52: a–c, nematogen, anterior region; d, e, rhombogen, anterior region; f, vermiform embryos within axial cell; g, infusorigen; h, i, infusoriform embryos, horizontal section (h), sagittal section (i). Scale bars: 50 µm in (d), 10 µm in a–c, e–i.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.