Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2,322
datasets available to search
ShareScore release 0.9.0
Dataset results
2,322 results for “precipitations”
BOREAS HYD-01 Under Canopy Precipitation Data
Under-canopy precipitation measurements were made by the BOREAS HYD-01 science team in 1994, 1995, and 1996 at various flux tower sites in the NSA and SSA. In 1994, these data were collected at the NSA-OJP, NSA-YJP, SSA-OJP, and SSA-YJP sites. Starting in 1995 and ending in 1997, data were collected at the NSA-OBS, NSA-OJP, NSA-YJP, and SSA-OA. These data were collected to support HYD-01 research by measuring the amount of water that falls through the canopy and is intercepted by the ground or moss. These data coincide with volumetric soil moisture measurements made by HYD-01.
GPM ATMS on NOAA-20 (GPROF) Climate-based Radiometer Precipitation Profiling L2A 1.5 hours 17 km V07 (GPM_2AGPROFNOAA20ATMS_CLIM) at GES DISC
Version 07 is the current version of the data set. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (also known as, GPM GPROF (Level 2)) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors: GMI, SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18) AMSR2 (GCOM-W1), TMI MHS (NOAA 18&19, METOP A&B), ATMS (SNPP and NOAA-20). This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are near-realtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided. The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an a-priori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
GPM DPR Precipitation Profile L2A 1.5 hours 5 km V07 (GPM_2ADPR) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07..2ADPR provides single- and dual-frequency-derived precipitation estimates from the Ku and Ka radars of the Dual-Frequency Precipitation Radar (DPR) on the core GPM spacecraft. The output consists of three main classes of precipitation products: those derived from the Ku-band frequency over a wide swath (245 km), those derived from the Ka-band frequency over a narrow swath (125 km), and those derived from the dual-frequency data over the narrow swath. The Ka-band results are further divided into the standard and high-sensitivity estimates. In the standard sensitivity mode, the fields of view within the inner swath are matched to those of the Ku-band. Data from these matched-beam Ku- and Ka-band fields of view are used to derive the dual-frequency precipitation products. The retrievals are performed at each radar range bin along the slant path of the radar instrument field of view (IFOV).
SAFARI 2000 TRMM 3B-43 Monthly Precipitation, 1-Deg, 1999-2001
The purpose of the Tropical Rainfall Measuring Mission (TRMM) and TRMM Product 3B-43 is to provide a monthly, best-estimate precipitation rate and root-mean-square (RMS) precipitation error. These gridded estimates are on a one-calendar month temporal resolution and a 1-degree by 1-degree spatial resolution for the global band extending from 40 degrees south to 40 degrees north in latitude. Product 3B-43 combines two independent precipitation estimates, the daily-average adjusted GOES Precipitation Index (GPI) based on merged-infrared (IR) estimates (TRMM Product 3B-42) and the monthly accumulated Climate Assessment and Monitoring System (CAMS) or Global Precipitation Climatology Centre (GPCC) rain gauge analysis (TRMM Products 3A-45A and 3B-45B, respectively). During initial processing the CAMS data is used. During reprocessing, the GPCC data is used.The data set prepared for SAFARI covers the years 1999, 2000, and 2001. The data files are stored as yearly files of monthly images. The monthly images are stored in a band sequential [BSQ] format (one image after the other) within the yearly files. The files for each year thus contain 12 monthly images per file.
GPM AMSUB on NOAA16 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA16AMSUB_DAY_CLIM) at GES DISC
The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
TRMM (TMPA-RT) Near Real-Time IR precipitation estimate L3 1-hour 0.25 degree x 0.25 degree V7 (TRMM_3B41RT) at GES DISC
TMPA (3B41RT) dataset have been discontinued as of Dec. 31, 2019, and users are strongly encouraged to shift to the successor IMERG datasets (doi: 10.5067/GPM/IMERG/3B-HH-E/06, 10.5067/GPM/IMERG/3B-HH-L/06).These data were output from the TRMM Multi-satellite Precipitation Analysis (TMPA), the Near Real-Time (RT) processing stream. The latency was about seven hours from the observation time, although processing issues may delay or prevent this schedule. Users should be mindful that the price for the short latency of these data is the reduced quality as compared to the research quality product 3B42. This particular dataset is an intermediate variable (VAR) rainrate IR estimate.Data files start with a header consisting of a 2880-byte record containing ASCII characters. The header line makes the file nearly self-documenting, in particular spelling out the variable and version names, and giving the units of the variables. Immediately after the header follow 3 data fields, "precip", "error","# pixels", with byte count correspondingly 1382400,1382400,691200. First two are 2-byte integers, and the third is 1-byte. All fields are 1440x480 grid boxes (0-360E,60N-S). The first grid box center is at (0.125E,59.875N). The grid increments most rapidly to the east. Grid boxes without valid data are filled with the (2-byte integer) "missing" value -31999. Valid estimates are only provided in the band 50N-S. This binary data sets are in IEEE "big-endian" floating-point format.
GPM ATMS on NOAA-21 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA21ATMS_DAY_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM MHS on METOP-B (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFMETOPBMHS_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM PR on TRMM Reflectivity, Precipitation Statistics, Histograms, at Surface and Fixed Heights, 1 month 5x5 and 0.25x0.25 degree V07 (GPM_3PR) at GES DISC
This is the new (GPM-formated) TRMM product. It replaces the old TRMM_3A25,3A26Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.This is the GPM-like formatted TRMM Precipitation Radar (PR) monthly gridded data, first released with the "V8" TRMM reprocessing. The TRMM radar Level 3 grids are now consistent with the GPM Dual-frequency Precipitation Radar (DPR). The closest ancestor of this dataset was the monthly radar statistics 3A25.This product consists of monthly statistics of the PR measurements at 0.25x0.25 degrees, and monthly histograms and statistics at 5x5 degrees, horizontal resolution.The objective of the algorithm is to calculate various daily statistics from the level 2 PRoutput products. Four types of statistics are calculated:1. Probabilities of occurrence (count values)2. Means and standard deviations3. Histograms4. Correlation coefficientsIn all cases, the statistics are conditioned on the presence of rain or some other quantity suchas the presence of stratiform rain or the presence of a bright-band. For example, to computethe unconditioned mean rain rate, the conditional mean must be multiplied by the probabilityof rain which, in turn is calculated from the ratio of rain counts to the total number ofobservations in the box of interest.The grids are in the Planetary Grid 2 structure matching the Dual-frequency PR on the core GPM observatory that covers 67S to 67N degrees of latitudes. The low resolution 5x5 deg grid covers 70S to 70N. Areas beyond the ±40 degrees of latitudes are padded with empty grid cells.
CAMEX-4 2ND GENERATION PRECIPITATION RADAR V1
The CAMEX-4 2nd Generation Precipitation Radar dataset was collected by the Second Generation Precipitation Radar (PR-2), which is a dual-frequency, Doppler, dual-polarization radar system that includes digital, real-time pulse compression, extremely compact RF electronics, and a large deployable dual-frequency cylindrical parabolic antenna subsystem. The PR-2 Doppler radar was used during the CAMEX-4 campaign to collect data for studying tropical storms and cyclones.
GPM MHS on METOP-A (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFMETOPAMHS_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPCP Precipitation Level 3 Daily 0.5-Degree V3.3 (GPCPDAY) at GES DISC
Version 3.3 is the current version. Older versions have been superseded by Version 3.3.Product latency/update: The products are currently paused at September 2024 because the IR input dataset from NCEI requires a new calibration scheme to extend past that point. Once NCEI irons out the calibration, we expect to return to quarterly updates.The Global Precipitation Climatology Project (GPCP) is the precipitation component of an internationally coordinated set of (mainly) satellite-based global products dealing with the Earth's water and energy cycles, under the auspices of the Global Water and Energy Exchange (GEWEX) Data and Assessment Panel (GDAP) of the World Climate Research Program. As the follow on to the GPCP Version 1.3 One Degree Daily product, GPCP Version 3 (GPCP V3.3) seeks to continue the long, homogeneous precipitation record using modern merging techniques and input data sets. The GPCPV3 suite currently consists of the 0.5-degree Monthly and 0.5-degree Daily. Additional products may be added, which consist of (1) 0.5-degree pentad and (2) 0.1-degree 3-hourly. All GPCPV3 products will be internally consistent. Inputs consist of GPM IMERG in the span 55°N-S, and TOVS/AIRS estimates, adjusted climatologically to IMERG, outside 55°N-S. The Daily estimates are scaled to approximately sum to the Monthly value at each 0.5° grid box. In addition to the final precipitation field, probability of liquid phase estimates are provided globally.
GPM SSMI on F08 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFF08SSMI_CLIM) at GES DISC
Version 7 is the current version of the data set. Older versions will no longer be available and have been superseded by the current version. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM PR and TMI on TRMM (Combined Precipitation) L3 1 day 0.25x0.25 degree V07 (GPM_3CMB_TRMM_DAY) at GES DISC
This a new (GPM-formated) TRMM product, for the TRMM epoch (December 1997 - April 2015), created using GPM Algorithms. There is no equivalent in the old TRMM suite of products.This is the GPM-like formatted TRMM Combined Precipitation (TRMM Ku radar and microwave radiometer/imager), first released with the "V8" TRMM reprocessing.Combined Radar-Radiometer Algorithm performs two basic functions: First, it provides, in principle, the most accurate, high resolution estimates of surface rainfall rate and precipitation vertical distributions that can be achieved from a spaceborne platform, and it is therefore valuable for applications where information regarding instantaneous storm structure are vital.Second, a global, representative collection of combined algorithm estimates will yield a single common reference dataset that can be used to “cross-calibrate” rain rate estimates from all of the passive microwave radiometers in the TRMM and GPM constellations.The cross-calibration of radiometer estimates is crucial for developing a consistent, high time-resolution precipitation record for climate science and prediction model validationapplications.
GPM MHS on METOP-C (GPROF) Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFMETOPCMHS_DAY) at GES DISC
Version 07 is the current version of the data set. 3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
Advanced Microwave Precipitation Radiometer (AMPR) IMPACTS
The Advanced Microwave Precipitation Radiometer (AMPR) IMPACTS dataset consists of brightness temperature measurements collected by the Advanced Microwave Precipitation Radiometer (AMPR) onboard the NASA ER-2 high-altitude research aircraft. AMPR provides multi-frequency microwave imagery, with high spatial and temporal resolution for deriving cloud, precipitation, water vapor, and surface properties. These measurements were taken during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) campaign. Funded by NASA’s Earth Venture program, IMPACTS is the first comprehensive study of East Coast snowstorms in 30 years. Data files are available from December 16, 2019, through March 2, 2023, in netCDF-4 format.
GPM SSM/I on F14 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 12 km V07 (GPM_2AGPROFF14SSMI_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
BOREAS Follow-On HMet-01 Merged SSM/I and Rain Gauge Precipitation Data
A gridded data set has been assembled over the BOREAS hydro-meteorological study region that combines a precipitation data set based on a rain gauge network with precipitation estimates based on SSM/I satellite images. The result is an hourly precipitation data set covering 122 consecutive days beginning on June 1, 1996.
GPM ATMS on NOAA-21 (GPROF) Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA21ATMS_DAY) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. 3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
AIRS/Aqua L2G Precipitation Estimate V006 (AIRG2SSD) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This precipitation estimate from AIRS is using TOVS-like algorithm, and is intended for merging into the precipitation product of the Global Precipitation Climatology Project (GPCP). The precipitation estimate from AIRS Level 2 Support product, which are 6-min swath granules (240 per day) are combined here into one daily "Level 2G" global grid with dimensions (24x1440x720). Thus every hour is a "layer", and the resulting grid cell size is 0.25 degree (~25 km). Thus the grid size is made to fit TRMM products. Since AIRS precipitation is retrieved at AMSU footprint resolution, which is about 45 km at nadir, many grid cells in this 0.25-deg grid are "empty". The data are stored such that the first line is the South Pole. The geolocation information for every hour-layer is also provided in the file.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.