Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

2,322

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

2,322 results for “precipitations”

Learn how ShareScore rates datasets ↗
nasa28/100

GPM Ground Validation Advanced Microwave Precipitation Radiometer (AMPR) OLYMPEX V1

The GPM Ground Validation Advanced Microwave Precipitation Radiometer (AMPR) OLYMPEX dataset was collected by the AMPR instrument flown on the high altitude ER-2 research aircraft from November 9 - December 15, 2015, during the Olympic Mountains Experiment (OLYMPEX) field campaign conducted at Washington State’s Olympic Peninsula. AMPR is an airborne passive microwave radiometer from which cloud, precipitation, water vapor, wind speed and wind direction can be obtained using advanced algorithms with the 10.7, 19.35, 37.1, and 85.5 GHz microwave frequency brightness temperatures measured by AMPR. The primary goal of OLYMPEX was to validate rain and snow measurements in midlatitude frontal systems moving from ocean to coast to mountains. AMPR data at the Global Hydrology Resource Center (GHRC) DAAC include netCDF format data files of brightness temperature and PNG browse files of Quality Control Flags and Brightness Temperatures.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SAPHIR on MT1 (PRPS) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 10 km V06 (GPM_2APRPSMT1SAPHIR_CLIM) at GES DISC

Version 6 is the current version of this dataset. Older versions are no longer available and have been superseded by Version 6.The Precipitation Retrieval and Profiling Scheme (PRPS)is designed to provide a best estimate of precipitation based upon matched SAPHIR-DPR observations. This fulfils in part the essence of GPM (and its predecessor, TRMM) in which the core observatory acts as a calibrator of precipitation retrievals for the international constellation of passive microwave instruments. In doing so the retrievals from the partner constellation sensors are able to provide greater temporal sampling and great spatial coverage than is possible from the DPR instrument alone. However, the limitations of the DPR instrument are transferred through the retrieval scheme to the resulting precipitation products.Fundamental to the design of the PRPS is the independence from any dynamic ancillary data sets: the retrieval is based solely upon the satellite radiances, a static a priori radiance-rainrate database (and index), and (static) topographical data. Critically, the technique is independent of any model information, unlike the retrievals generated through the Goddard PROFiling (GPROF) scheme: this independence is advantageous when generating products across time scales from near real-time (inaccessibility to model data) to climatological scales (circumventing trends in model data).The algorithm is designed to generate instantaneous estimates of precipitation at a constant resolution (regardless of scan position), for all scan positions and scan lines. In addition to the actual precipitation estimate, an assessment of the error is made, and a measure of the ‘fit’ of the observations to the database provided. A quality flag is also provided, with any bad data generating a ‘missing flag’ in the retrieval.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SSMI on F08 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFF08SSMI_DAY_CLIM) at GES DISC

Version 7 is the current version of the data set. Older versions will no longer be available and have been superseded by the current version. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SSM/I on F15 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 12 km V07 (GPM_2AGPROFF15SSMI_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SAPHIR on MT1 (PRPS) Radiometer Precipitation Profiling L3 1 day 0.25 x 0.25 degree V06 (GPM_3PRPSMT1SAPHIR_DAY) at GES DISC

Version 6 is the current version of this dataset. Older versions are no longer available and have been superseded by Version 6.The Precipitation Retrieval and Profiling Scheme (PRPS)is designed to provide a best estimate of precipitation based upon matched SAPHIR-DPR observations. This fulfils in part the essence of GPM (and its predecessor, TRMM) in which the core observatory acts as a calibrator of precipitation retrievals for the international constellation of passive microwave instruments. In doing so the retrievals from the partner constellation sensors are able to provide greater temporal sampling and great spatial coverage than is possible from the DPR instrument alone. However, the limitations of the DPR instrument are transferred through the retrieval scheme to the resulting precipitation products. Fundamental to the design of the PRPS is the independence from any dynamic ancillary data sets: the retrieval is based solely upon the satellite radiances, a static a priori radiance-rainrate database (and index), and (static) topographical data. Critically, the technique is independent of any model information, unlike the retrievals generated through the Goddard PROFiling (GPROF) scheme: this independence is advantageous when generating products across time scales from near real-time (inaccessibility to model data) to climatological scales (circumventing trends in model data).The algorithm is designed to generate instantaneous estimates of precipitation at a constant resolution (regardless of scan position), for all scan positions and scan lines. In addition to the actual precipitation estimate, an assessment of the error is made, and a measure of the ‘fit’ of the observations to the database provided. A quality flag is also provided, with any bad data generating a ‘missing flag’ in the retrieval.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM ATMS on NOAA-20 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA20ATMS_DAY_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa28/100

AIRS/Aqua L2G Precipitation Estimate (AIRS-only) V7.0 at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. This precipitation estimate from AIRS IR only is using a TOVS-like algorithm, and is intended for merging into the precipitation product of the Global Precipitation Climatology Project (GPCP). The precipitation estimate from AIRS Level 2 Support product, which are 6-min swath granules (240 per day) are combined here into one daily "Level 2G" global grid with dimensions (24x1440x720). Thus every hour is a "layer", and the resulting grid cell size is 0.25 degree (~25 km). Thus the grid size is made to fit TRMM products. Since AIRS precipitation is retrieved at AMSU footprint resolution, which is about 45 km at nadir, many grid cells in this 0.25-deg grid are "empty". The data are stored such that the first line is the South Pole. The geolocation information for every hour-layer is also provided in the file.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SSMIS on F18 (GPROF) Climate-based Radiometer Precipitation Profiling 1.5 hours 12 km V07 (GPM_2AGPROFF18SSMIS_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM Ground Validation Precipitation Video Imager (PVI) LPVEx V1

The GPM Ground Validation Precipitation Video Imager (PVI) LPVEx dataset consists of precipitation particle images and drop size distribution (DSD) data collected by the Precipitation Video Imager (PVI) during the Global Precipitation Measurement (GPM) mission Light Precipitation Validation Experiment (LPVEx) field campaign. This field campaign took place around the Gulf of Finland in September and October of 2010. The goal of the campaign was to provide additional high-latitude, light rainfall measurements for the improvement of GPM satellite precipitation algorithms. The PVI instrument was designed by Dr. Larry Bliven at NASA Wallops Flight Facility. Data files are available from September 17, 2010 through May 11, 2011 in Excel format and contain the average, minimum, and logarithmic DSD bin sizes and number of particles per unit time. Browse images are available in BMP and JPG formats.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM TMI on TRMM (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFTRMMTMI_CLIM) at GES DISC

This is the new (GPM-formated) TRMM product. It replaces the old TRMM_3A12,3A11 Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA MEASURES Precipitation Ensemble based on SSMIS DMSP F19 NASA PPS L1C V05 Tbs 1-orbit L2 Swath 12x12km V1 (PRECIP_SSMIS_F19) at GES DISC

The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Special Sensor Microwave Imager Sounder (SSMIS) flown on the US Defense Meteorological Satellite Program (DMSP) F19 mission. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 2014 to 2016 with one file per orbit.

restrictednotspecifiedApr 2025View details →
nasa28/100

TMI/TRMM precipitation and uncertainty (TMPA) L3 3 hour 0.25 degree x 0.25 degree V001 (WC_MULTISEN_PREC_025) at GES DISC

TMI/TRMM precipitation and uncertainty (TMPA) L3 3 hour 0.25 degree x 0.25 degree V001 provides estimates of accumulated precipitation from the Tropical Rainfall Measuring Mission (TRMM) and Other Data Precipitation Data Set (TRMM 3B42; Huffman et al., 2007), along with estimates of the uncertainty in the TRMM 3B42 made by Bytheway and Kummerow (2013). The data set covers both ocean and land from 50 degree North to 50 degree South.

restrictednotspecifiedApr 2025View details →
nasa28/100

Land/Sea static mask relevant to TMPA precipitation 0.25x0.25 degree V2 (TRMM_TMPA_LandSeaMask) at GES DISC

Version 2 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 2.This land sea mask originated from the NOAA group at SSEC in the 1980s. It was originally produced at 1/6 deg resolution, and then regridded for the purposes of GPCP, TMPA, and IMERG precipitation products. NASA code 610.2, Terrestrial Information Systems Laboratory, restructured this TMPA land sea mask to match the TMPA grid, and converted the file to CF-compliant netCDF4. Version 2 was created in May, 2019 to resolve detected inaccuracies in coastal regions.Users should be aware that this is a static mask, i.e. there is no seasonal or annual variability, and it is due for update. It is not recommended to be used outside of the aforementioned precipitation data.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA MEASURES Precipitation Ensemble based on AMSRE AQUA NASA PPS L1C V05 Tbs 1-orbit L2 Swath 12x12km V1 (PRECIP_AMSRE_AQUA) at GES DISC

The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Advanced Microwave Scanning Radiometer-E (AMSR-E) flown on the AQUA satellite. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 2002 to 2011 with one file per orbit.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA MEASURES Precipitation Ensemble based on SSMIS DMSP F16 NASA PPS L1C V05 Tbs 1-orbit L2 Swath 12x12km V1 (PRECIP_SSMIS_F16) at GES DISC

The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Special Sensor Microwave Imager Sounder (SSMIS) flown on the US Defense Meteorological Satellite Program (DMSP) F16 mission. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 2005 to 2020 with one file per orbit.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM DPR Precipitation Profile 1 month 0.25 degree x 0.25 degree V07 (GPM_3DPR) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.. The Level 3 DPR products present the user with summary information over daily and monthly time periods. These gridded products are in a convenient gridded form and can be used easily in comparisons with other satellite and ground data. The Level 3 DPR algorithm accumulates instantaneous precipitation estimates from the Level 2 retrieval algorithms into grids over a day and month time span. There are two grid resolutions: 5.0 degrees and 25 kms. For each grid box, the core statistics are the number of measurements, mean, and standard deviation. Most variables are also conditioned on surface type and precipitation type with other three-dimensional fields adding the height above the ellipsoid. Unless otherwise specified, the means are conditioned on precipitation being present (rain rate > 0). For the daily product, the mean square statistic is saved rather than the standard deviation. In addition to the daily and monthly products is a simplified joint daily product that contains a subset of the fields from the full daily product.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM Ground Validation Precipitation Imaging Package (PIP) ICE POP V1

The GPM Ground Validation Precipitation Imaging Package (PIP) ICE POP dataset includes precipitation measurements and video images collected by the Precipitation Imaging Package (PIP) during the International Collaborative Experiments for Pyeongchang 2018 Olympic and Paralympic Winter Games (ICE-POP) field campaign in South Korea. The two major objectives of ICE-POP were to study severe winter weather events in regions of complex terrain and improve the short-term forecasting of such events. These data contributed to the Global Precipitation Measurement mission Ground Validation (GPM GV) campaign efforts to improve satellite estimates of orographic winter precipitation. Data values obtained using PIP measurements include particle size distributions, fall velocity distributions, precipitation density estimates, and precipitation rates. The dataset files are available from June 18, 2017 through December 30, 2018 as generic data files (.dat) in ASCII-CSV format with browse imagery and video available in PNG and AVI format.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPCP Precipitation Level 3 Monthly 0.5-Degree V3.2 (GPCPMON) at GES DISC

Version 3.2 has been superseded by Version 3.3 (10.5067/MEASURES/GPCP/DATA306).The Global Precipitation Climatology Project (GPCP) is the precipitation component of an internationally coordinated set of (mainly) satellite-based global products dealing with the Earth's water and energy cycles, under the auspices of the Global Water and Energy Experiment (GEWEX) Data and Assessment Panel (GDAP) of the World Climate Research Program. As the follow on to the GPCP Version 2.X products, GPCP Version 3 (GPCP V3.2) seeks to continue the long, homogeneous precipitation record using modern merging techniques and input data sets. The GPCPV3 suite currently consists the 0.5-degree monthly and daily products. A follow-on 0.1-degree 3-hourly is expected. All GPCPV3 products will be internally consistent. The monthly product spans 1983 - 2020. Inputs consist of the GPROF SSMI/SSMIS orbit files that are used to calibrate the PERSIANN-CDR IR-based precipitation in the span 60°N-S, which are in turn calibrated to the monthly 2.5-degree METH product. The METH-GPROF-adjusted PERSIANN-CDR IR estimates are then climatologically adjusted to the blended TCC/MCTG. Outside of 58°N-S, TOVS/AIRS estimates, adjusted climatologically to the MCTG, are used. The PERSIANN-CDR / TOVS/AIRS estimates are then merged in the region 35°N-S-58°N-S, which are then merged with GPCC gauge analyses over land to obtain the final product. In addition to the final precipitation field, ancillary precipitation and error estimates are provided.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA MEASURES Precipitation Ensemble based on SSM/I DMSP F14 NASA PPS L1C V06 Tbs 1-orbit L2 Swath 12x12km V1 (PRECIP_SSMI_F14) at GES DISC

The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Special Sensor Microwave/Imager (SSM/I) flown on the US Defense Meteorological Satellite Program (DMSP) F14 mission. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 1997 to 2008 with one file per orbit.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM IMERG Late Precipitation L3 Half Hourly 0.1 degree x 0.1 degree V07 (GPM_3IMERGHHL) at GES DISC

Version 07B is the current version of the IMERG data sets. Older versions will no longer be available and have been superseded by Version 07.The Integrated Multi-satellitE Retrievals for GPM (IMERG) is the unified U.S. algorithm that provides the multi-satellite precipitation product for the U.S. GPM team.The precipitation estimates from the various precipitation-relevant satellite passive microwave (PMW) sensors comprising the GPM constellation are computed using the 2021 version of the Goddard Profiling Algorithm (GPROF2021), then gridded, intercalibrated to the GPM Combined Ku Radar-Radiometer Algorithm (CORRA) product, and merged into half-hourly 0.1°x0.1° (roughly 10x10 km) fields. Note that CORRA is adjusted to the monthly Global Precipitation Climatology Project (GPCP) Satellite-Gauge (SG) product over high-latitude ocean to correct known biases.The half-hourly intercalibrated merged PMW estimates are then input to both a Morphing-Kalman Filter (KF) Lagrangian time interpolation scheme based on work by the Climate Prediction Center (CPC) and the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN) Dynamic Infrared–Rain Rate (PDIR) re-calibration scheme. In parallel, CPC assembles the zenith-angle-corrected, intercalibrated merged geo-IR fields and forwards them to PPS for input to the PERSIANN-CCS algorithm (supported by an asynchronous re-calibration cycle) which are then input to the KF morphing (quasi-Lagrangian time interpolation) scheme.The KF morphing (supported by an asynchronous KF weights updating cycle) uses the PMW and IR estimates to create half-hourly estimates. Motion vectors for the morphing are computed by maximizing the pattern correlation of successive hours within each of the precipitation (PRECTOT), total precipitable liquid water (TQL), and vertically integrated vapor (TQV) data fields provided by the Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2) and Goddard Earth Observing System model Version 5 (GEOS-5) Forward Processing (FP) for the post-real-time (Final) Run and the near-real-time (Early and Late) Runs, respectively. The vectors from PRECTOT are chosen if available, else from TQL, if available, else from TQV. The KF uses the morphed data as the “forecast” and the IR estimates as the “observations”, with weighting that depends on the time interval(s) away from the microwave overpass time. The IR becomes important after about ±90 minutes away from the overpass time. Variable averaging in the KF is accounted for in a routine (Scheme for Histogram Adjustment with Ranked Precipitation Estimates in the Neighborhood, or SHARPEN) that compares the local histogram of KF morphed precipitation to the local histogram of forward- and backward-morphed microwave data and the IR.The IMERG system is run twice in near-real time:"Early" multi-satellite product ~4 hr after observation time using only forward morphing and"Late" multi-satellite product ~14 hr after observation time, using both forward and backward morphingand once after the monthly gauge analysis is received:"Final", satellite-gauge product ~4 months after the observation month, using both forward and backward morphing and including monthly gauge analyses.In V07, the near-real-time Early and Late half-hourly estimates have a monthly climatological concluding calibration based on averaging the concluding calibrations computed in the Final, while in the post-real-time Final Run the multi-satellite half-hourly estimates are adjusted so that they sum to the Final Run monthly satellite-gauge combination. In all cases the output contains multiple fields that provide information on the input data, selected intermediate fields, and estimation quality. In general, the complete calibrated precipitation, precipitation, is the data field of choice for most users.Precipitation phase is a diagnostic variable computed using analyses of surface temperature, humidity, and pressure.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.