Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,018
datasets available to search
ShareScore release 0.9.0
Dataset results
3,018 results for “aire”
ATom: Data Stream for Modeling the Reactivity of ATom Air Parcels, 2016-2018
This dataset provides Modeling Data Stream (MDS) and Reactivity Data Stream (RDS) products for each of the four ATom campaigns conducted from 2016 to 2018. MDS files contain the atmospheric constituents needed to model the RDS of the air parcels along ATom flight paths. The MDS is a continuous data stream (every 10 seconds) of the atmospheric content of these key chemical species derived from the in-situ measurements collected along ATom flight paths (as reported in the comprehensive related dataset ATom: Merged Atmospheric Chemistry, Trace Gases, and Aerosols). Values for chemical species measured by multiple instruments were selected from the instrument with better coverage and/or greater precision. Missing values were filled using interpolation for short gaps. For long gaps owing to instrument failure, values were estimated using multiple linear regressions from comparable parallel flights from other ATom campaigns. All species were flagged for instrument source and values were flagged for gap-filling status. In combination, MDS and RDS provide, in essence, a photochemical climatology for each air parcel along ATom flight paths containing the reactive species that control the loss of methane and the production and loss of ozone.
Aqua/AIRS L3 Daily Standard Physical Retrieval (AIRS-only) 1 degree x 1 degree V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS Level 3 Daily Gridded Product contains standard retrieval means, standard deviations and input counts. Each file covers a temporal period of 24 hours for either the descending (equatorial crossing North to South at 1:30 AM local time) or ascending (equatorial crossing South to North at 1:30 PM local time) orbit. The data starts at the international dateline and progresses westward (as do the subsequent orbits of the satellite) so that neighboring gridded cells of data are no more than a swath of time apart (about 90 minutes). The two parts of a scan line crossing the dateline are included in separate L3 files, according to the date, so that data points in a grid box are always coincident in time. The edge of the AIRS Level 3 gridded cells is at the date line (the 180E/W longitude boundary). When plotted, this produces a map with 0 degrees longitude in the center of the image unless the bins are reordered. This method is preferred because the left (West) side of the image and the right (East) side of the image contain data farthest apart in time. The gridding scheme used by AIRS is the same as used by TOVS Pathfinder to create Level 3 products. The daily Level 3 products have gores between satellite paths where there is no coverage for that day. The geophysical parameters have been averaged and binned into 1 x 1 deg grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.The value for each grid box is the sum of the values that fall within the 1x1 area divided by the number of points in thebox.
GPM Ground Validation Upper Air Radiosonde LPVEx V1
The GPM Ground Validation Radiosonde LPVEx dataset consists of sounding data collected as part of the Global Precipitation Measurement (GPM) mission Ground Validation Light Precipitation Validation Experiment (LPVEx). This field campaign took place around the Gulf of Finland in September and October of 2010. The goal of the campaign was to provide additional high altitude, light rainfall measurements for the improvement of GPM satellite precipitation algorithms. The Vaisala RS92 radiosonde was used to produce vertical profiles of atmospheric temperature, pressure, humidity, and winds. The radiosondes were launched from two locations: Kumpula and Vantaa. The Upper Air Radiosonde LPVEx dataset consists of TSV data files and PNG browse image files.
Aqua/AIRS L2 Support Retrieval (AIRS-only) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRX2SUP. It is produced using AIRS IR only because the radiometric noise in several AMSU channels started to increase significantly (since June 2007). The Support Product includes higher vertical resolution profiles of the quantities found in the Standard Product, plus intermediate outputs (e.g., microwave-only retrieval), research products such as the abundance of trace gases, and detailed quality assessment information. The Support Product profiles contain 100 levels between 1100 and .016 mb; this higher resolution simplifies the generation of radiances using forward models, though the vertical information content is no greater than that in the Standard Product profiles. The intended users of the Support Product are researchers interested in generating forward radiance or in examining research products, and the AIRS algorithm development team. The Support Product is generated at all locations as Standard Products. An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
AIRS/Aqua L2 CO2 support retrieval (AIRS+AMSU) V005 (AIRX2SPC) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. In particular, this support product focuses on the tropospheric CO2 retrieval. In general, AIRS Support Products include higher vertical resolution profiles of the quantities found in the Standard Product plus intermediate output (e.g., microwave-only retrieval), research products such as the abundance of trace gases, and detailed quality assessment information. The Support Product profiles contain 100 pressure levels between 1100 and .016 mb; this higher resolution simplifies the generation of radiances using forward models, though the vertical information content is no greater than in the Standard Product profiles. The horizontal resolution is 50 km. The intended users of the Support Product are researchers interested in generating forward radiance, or in examining research products, and the AIRS algorithm development team. The Support Product is generated at all locations as Standard Products. An AIRS granule has been set as 6 minutes of data. This normally corresponds to approximately 1/15 of an orbit but exactly 45 scanlines of AMSU-A data or 135 scanlines of AIRS and HSB data.
BOREAS TE-06 1994 Soil and Air Temperatures in the NSA
The BOREAS TE-06 team collected several data sets to examine the influence of vegetation, climate, and their interactions on the major carbon fluxes for boreal forest species. This data set contains measurements of the air temperature at a single height and soil temperature at several depths in the NSA from 25-May to 8-Oct-1994. Chromel-Constantan thermocouple wires run by a miniprogrammable data logger (Model 21X, Campbell Scientific, Inc., Logan, UT) provided direct measurements of temperature.
SAFARI 2000 Modeled Tropospheric Air Mass Trajectories, Dry Season 2000
The ETA Forecast Trajectory Model was used to produce forecasts of air-parcel trajectories twice a day at three pressure levels over seven sites in Southern Africa for the period August 14, 2000 to September 23, 2000. These sites are Durban, Middleburg, Pietersburg, and Springbok, South Africa; Maun, Botswana; Mongu, Zambia; and Windhoek, Namibia. The twice daily three-dimensional wind field (at 0000 and 1200 UTC) was used as input to the trajectory model. By integrating the vertical motion of the air parcels over a period of time, the trajectory model was able to forecast the net vertical displacement of air parcels during 12-hour periods. The resulting trajectory plots represent the three-dimensional transport of air in time and can be used to examine what is happening in the low-to-mid troposphere during flight and ground-based observations. These levels are most significant in terms of the thermodynamic structure of the troposphere, especially the stable layers and accumulation of material between and below them, as well containing the major levels of subsidence over the subcontinent. The trajectory model output and thermodynamic profiles of the troposphere were used to position aircraft for sampling trace gases, aerosols and other species during the SAFARI 2000 field campaign and to predict regions of high aerosol and trace gas concentrations downwind.The model output data are daily forward and backward trajectory plots at 850 hPa, 700 hPa, and 500 hPa pressure levels for each location. The plots are provided as JPEG images with coordinate, date, and time stamps.
Sounder SIPS: AQUA AIRS IR-only Level 2: Atmospheric state at Standard Pressure Levels derived from CLIMCAPS V2.1 (SNDRAQIL2PLEVCPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) instrument aboard the Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. This file contains the fixed Pressure Level product (PLEV) variables derived from the CLIMCAPS algorithm using data. They include including gas mixing ratio profiles, column totals, surface values, tropopause properties, and relative humidity, together with per-field quality flagging. The profiles are specified at the surface and layer boundaries and are estimated from layer amounts using the L2 algorithmAn AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
BOREAS TGB-07 Ambient Air Herbicide and Organochlorine Concentration Data
The BOREAS TGB-07 team measured the concentration and flux of several agricultural pesticides in air, rainwater, and dry deposition samples in order to determine the associated yearly deposition rates. This data set contains information on the ambient air concentration of seven herbicides [2,4-dichlorophenoxyacidic_acid (2,4-D), bromoxynil, dicamb, 2-methyl-4-chlorophenoxyacetic acid (MCPA), triallate, trifluralin, and diclop-methyl] known to appear in the atmosphere of the Canadian prairies. Also, the concentration of three herbicides (atrazine, alaclor and metolachlor), two groups of insecticides (lindane and breakdown products and dichlro-diphenyl-trichloroethane (DDT) and breakdown products), and several polychlorinated biphenyls commonly used in the central United States were measured. All of these chemicals are reported, in the literature, to be transported in the atmosphere. Many have been reported to occur in boreal and arctic food chains. The sampling was carried out from June 16 to August 13, 1993 and May 4 to July 20, 1994 at the BOREAS site in the Prince Albert National Park (Waskesiu).
Aqua/AIRS L3 Monthly Standard Physical Retrieval (AIRS+AMSU+HSB) 1 degree x 1 degree V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRX3STM. However, it contains science retrievals that use the Humidity Sounder for Brazil (HSB). Because the HSB instrument lived only from September 2002 through January 2003 when it terminally failed, the data set covers these five months only. The AIRS Level 3 Monthly Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts. Each file covers a calendar month. The mean values are simply the arithmetic means of the daily products, weighted by the number of input counts for each day in that grid box. The geophysical parameters have been averaged and binned into 1 x 1 grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.
AIRS/Aqua L3 8-day CO2 in the free troposphere (AIRS+AMSU) 2.5 degrees x 2 degrees V005 (AIRX3C28) at GES DISC
Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is the AIRS mid-tropospheric Carbon Dioxide (CO2) Level 3 8-day Gridded Retrieval, from the AIRS and AMSU instruments on board of Aqua satellite. It is 8-day gridded data, at 2.5x2 deg (lon)x(lat) grid cell size. The data is in mole fraction units (data x 10^6 =ppm in volume). This is a total tropospheric column property. The file format is HDF-EOS 2.12 corresponding to HDF4. This AIRS mid-tropospheric CO2 Level 3, 8-day, Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts as well as the latitude and longitude arrays giving the centers of the grid boxes. Each file covers an 8-day period. The mean values are simply the arithmetic means of the individual CO2 retrievals which fall within that grid box over the 8-day period. The mid-tropospheric CO2 retrievals have been averaged and binned into 2.5 x 2 deg grid cells, from -180.0 to +180.0 deg longitude and from -60.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean.
Spatial Statistical Data Fusion (SSDF) Level 3: CONUS Near-Surface Atmospheric Temperature from SNPP CrIMSS and Aqua AIRS, V2 (SNDR13IML3SSDFCNSAT)
This data set provides an estimate of the surface air temperature. It infers a value for each grid point based on nearby and distant values of the input Level-2 datasets and estimates of the variance of those values, with lower variances given higher weight. The Spatial Statistical Data Fusion (SSDF) surface continental United States (CONUS) products, fuse data from the Atmospheric InfraRed Sounder (AIRS) instrument on the EOS-Aqua spacecraft with data from the Cross-track Infrared and Microwave Sounding Suite (CrIMSS) instruments on the Suomi-NPP spacecraft. The CrIMSS instrument suite consists of the Cross-track Infrared Sounder (CrIS) infrared sounder and the Advanced Technology Microwave Sounder (ATMS) microwave sounder. These are all daily products on a ¼ x ¼ degree latitude/longitude grid covering the continental United States (CONUS). The SSDF algorithm infers a value for each grid point based on nearby and distant values of the input Level-2 datasets and estimates of the variance of those values, with lower variances given higher weight. Performing the data fusion of two (or more) remote sensing datasets that estimate the same physical state involves four major steps: (1) Filtering input data; (2) Matching the remote sensing datasets to an in situ dataset, taken as a truth estimate; (3) Using these matchups to characterize the input datasets via estimation of their bias and variance relative to the truth estimate; (4) Performing the spatial statistical data fusion. We note that SSDF can also be performed on a single remote sensing input dataset. The SSDF algorithm only ingests the bias-corrected estimates, their latitudes and longitudes, and their estimated variances; the algorithm is agnostic as to which dataset or datasets those estimates, latitudes, longitudes, and variances originated from.
AIRS/Aqua L1B Visible/Near Infrared (VIS/NIR) geolocated and calibrated radiances V005 (AIRVBRAD) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The VIS/NIR level 1B data set contains visible and near-infrared calibrated and geolocated radiances in W/m^2/micron/steradian. This data set includes 4 channels in the 0.4 to 1.0 um region of the spectrum. Each day of AIRS data are divided into 240 granules each of 6 minute duration. However, the VIS/NIR granules are only produced in the daytime so there will always be fewer VIS/NIR granules. The primary purpose of the VIS/NIR channels is the detection and flagging of significant inhomogeneities in the infrared field-of-view,which may adversely impact the quality of the temperature and moisture soundings. Therefore the VIS/NIR radiance product has a higher spatial resolution than the Infrared radiance product. Each VIS/NIR scan has 9 alongtrack footprints and 720 across track footprints. For ease in comparing with the infrared product which has 135 along track footprints and 90 across track footprints, the VIS/NIR product has additional dimensions to account for the 9 additional alongtrack and 8 additional across track footprints.
OCO-2 Level 2 CO2 prior based on CO2 monthly flask record, global meteorology, and age of air, Retrospective Processing V10r (OCO2_L2_CO2Prior) at GES DISC
Version 10r is the current version of the data set. Older versions will no longer be available and are superseded by Version 10r.In early 2021, the OCO Team identified an issue with OCO-2 level 2 products processed since January 28, 2020. The Ancillary Geometric Product (AGAP) file, a static file used in OCO-2 Geolocation processing, was inadvertently replaced with an obsolete version. This AGAP file included a ~300 m pointing error. As a result, all OCO-2 Level 2, version 10r, data files for the period January 28 - December 31, 2020, were corrected and replaced. The replacement process was completed by the end of June, 2021. The significance of this error has been described in Kiel et al. (2019; doi:10.5194/amt-12-2241-2019).The Orbiting Carbon Observatory is the first NASA mission designed to collect space-based measurements of atmospheric carbon dioxide with the precision, resolution, and coverage needed to characterize the processes controlling its buildup in the atmosphere. The OCO-2 project uses the LEOStar-2 spacecraft that carries a single instrument. It incorporates three high-resolution spectrometers that make coincident measurements of reflected sunlight in the near-infrared CO2 near 1.61 and 2.06 micrometers and in molecular oxygen (O2) A-Band at 0.76 micrometers.
AIRS/Aqua L3 Monthly CO2 in the free troposphere (AIRS+AMSU) 2.5 degrees x 2 degrees V005 (AIRX3C2M) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is the AIRS mid-tropospheric Carbon Dioxide (CO2) Level 3 Monthly Gridded Retrieval, from the AIRS and AMSU instruments on board of Aqua satellite. It is monthly gridded data at 2.5x2 deg (lon)x(lat) grid cell size. The data is in mole fraction units (data x 10^6 =ppm in volume). This quantity is not a total column quantity because the sensitivity function of the AIRS mid-tropospheric CO2 retrieval system peaks over the altitude range 6-10 km. The quantity is what results when the true atmospheric CO2 profile is weighted, level-by-level, by the AIRS sensitivity function. The file format is HDF-EOS 2.12 corresponding to HDF4. This AIRS mid-tropospheric CO2 Level 3 Monthly Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts as well as the latitude and longitude arrays giving the centers of the grid boxes. Each file covers a calendar month. The mean values are simply the arithmetic means of the individual CO2 retrievals which fall within that grid box over the month. The mid-tropospheric CO2 retrievals have been averaged and binned into 2.5 x 2 deg grid cells, from -180.0 to +180.0 deg longitude and from -60.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean.
ATom: L2 Trace Gas and Isotope Measurements from Medusa Whole Air Sampler, Version 2
This dataset provides O2/N2, CO2, Ar/N2, and stable isotope ratios of CO2 measured in flasks collected by the Medusa Whole Air Sampler during airborne campaigns conducted by NASA's Atmospheric Tomography (ATom) mission. ATom deployed an extensive gas and aerosol payload on the NASA DC-8 aircraft for a systematic, global-scale sampling of the atmosphere, profiling continuously from 0.2 to 12 km altitude. Flights occurred in each of 4 seasons from 2016 to 2018. Medusa collected 32 cryogenically dried, flow, and pressure-controlled samples per flight. The samples are collected by an automated sampler into 1.5 L glass flasks that integrate over 25 seconds. Medusa provides discretely-sampled comparisons for onboard in situ O2/N2 ratio and CO2 measurements and unique measurements of Ar/N2 and 13C, 14C, and 18O isotopologues of CO2. Medusa flasks are analyzed on a sector-magnet mass spectrometer and a LiCor non-dispersive infrared CO2 analyzer by the Scripps O2 Program at Scripps Institution of Oceanography.
Aqua/AIRS L2 Cloud-Cleared Infrared Radiances (AIRS+AMSU+HSB) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRI2CCF. However, it contains science retrievals that use the HSB. Because the HSB instrument lived only from September 2002 through January 2003 when it terminally failed, the data set covers these five months only. Cloud-Cleared Radiances contain calibrated, geolocated channel-by-channel AIRS infrared radiances (milliWatts/m2/cm-1/steradian) that would have been observed within each AMSU footprint if there were no clouds in the FOV and produced along with the AIRS Standard Product, as they are the radiances used to retrieve the Standard Product. Nevertheless, they are an order of magnitude larger in data volume than the remainder of the Standard Products and, many Standard Product users are expected to have little interest in the Cloud Cleared Radiance. For these reasons they are a separate output file, but like the Standard Product, are generated at all locations.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Measurement of Air Pollution from Satellites (MAPS) Space Radar Laboratory - 2 (SRL2) Carbon Monoxide 5 degree by 5 degree data
MAPS OverviewThe MAPS experiment measures the global distribution of carbon monoxide (CO) mixing ratios in the free troposphere. Because of MAPS' previous flights on board the Space Shuttle, Earth system scientists now know that carbon monoxide concentrations in the troposphere are highly variable around the planet, and that widespread burning in the South American Amazon Basin and southern cerrados, the African savannahs,and the Australian grasslands and ranches are major sources of carbon monoxide in the southern hemisphere and tropical troposphere. The 1994 flights of the MAPS experiment provided CO measurements that show seasonal changes in CO emissions, sources, transports, and chemistry. InstrumentThe MAPS instrument is based on a technique called gas filter radiometry. Thermal energy from the Earth passes through the atmosphere and enters the viewport of the downlooking MAPS instrument. Carbon monoxide and nitrous oxide (N2O) in the atmosphere produce unique absorption lines in the transmitted energy. The energy which enters the MAPS instrument is split into three beams. One beam passes through a cell containing CO and falls onto a detector. This CO gas cell acts as a filter for the effects of CO present in the middle troposphere. A second beam falls directly onto a detector without passing through any gas filter. The difference in the voltage of the signals from these two detectors can be used to determine the amount of CO present in the atmosphere at an altitude of 7-8 km. During the dedicated Earth-Observing Space Shuttle mission in 1994, MAPS measured the distribution of carbon monoxide in the middle troposphere to evaluate CO sources and chemistry, and to evaluate the seasonal and interannual variation of this key atmospheric trace gas. Interpretation of these measurements will help us to better understand the atmosphere and the consequences that human activities initiate in global climate change. A third beam of the incident energy passes through a cell containing N2O and falls onto a detector. This N2O gas cell acts as a filter for the effects of N2O present in the atmosphere. The global distribution of N2O is well known, so the N2O signal can be used to detect the presence of clouds in the field of view and to correct the simultaneous CO measurement for systematic errors in the data. SRL2 GoalsThe MAPS SRL-2 mission took place during the Northern Hemisphere summer when global biomass burning is nearing its maximum. The southern hemispheric burning of savanna and agricultural grasslands can be extensive in central and southern South America and in nearly all of Africa, south of the equator. The tundra regions of the northern boreal zone also are approaching the peak burning season. Other regions may experience scattered fire events as a result of lightning strikes during severe thunderstorms. The primary goal of the MAPS experiment on SRL-2 is to provide a near global survey of the distribution of tropospheric carbon monoxide during northern hemisphere summer. The secondary goal is to determine how the global distribution of carbon monoxide changes over the course of the mission.SL2 SummaryThe high values of carbon monoxide are associated with extensive areas of smoke and haze that have been observed by the Endeavour (STS-68) flight crew. The smoke results from fires that are burning in the continental regions. The carbon monoxide is carried by tropical thunderstorms to the altitudes (2 to 10 miles above the surface) at which it is measured by the MAPS instrument. The data that are available from MAPS SRL2 include a 5 by 5 degree gridded box (MAPS_SRL2_5X5_HDF) and a second by second data product (MAPS_SRL2_COSEC_HDF). These data sets are available from the Langley DAAC.
Aqua/AIRS L2 Support Retrieval (AIRS+AMSU+HSB) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRX2SUP. However, it contains science retrievals that use the HSB. Because the HSB instrument lived only from September 2002 through January 2003 when it terminally failed, the data set covers these five months only. The Support Product includes higher vertical resolution profiles of the quantities found in the Standard Product, plus intermediate outputs (e.g., microwave-only retrieval), research products such as the abundance of trace gases, and detailed quality assessment information. The Support Product profiles contain 100 levels between 1100 and .016 mb; this higher resolution simplifies the generation of radiances using forward models, though the vertical information content is no greater than that in the Standard Product profiles. The intended users of the Support Product are researchers interested in generating forward radiance or in examining research products, and the AIRS algorithm development team. The Support Product is generated at all locations as Standard Products. An AIRS granule has been set as 6 minutes of data with 30 footprints cross track by 45 scanlines of AMSU-A data or 135 scanlines of AIRS and HSB data. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Spatial Statistical Data Fusion (SSDF) Level 3: CONUS Near-Surface Vapor Pressure Deficit from Aqua AIRS, V2 (SNDRAQIL3SSDFCVPD)
This data set provides an estimate of the vapor pressure deficit. It infers a value for each grid point based on nearby and distant values of the input Level-2 datasets and estimates of the variance of those values, with lower variances given higher weight.The Spatial Statistical Data Fusion (SSDF) surface continental United States (CONUS) products, fuse data from the Atmospheric InfraRed Sounder (AIRS) instrument on the EOS-Aqua spacecraft with data from the Cross-track Infrared and Microwave Sounding Suite (CrIMSS) instruments on the Suomi-NPP spacecraft. The CrIMSS instrument suite consists of the Cross-track Infrared Sounder (CrIS) infrared sounder and the Advanced Technology Microwave Sounder (ATMS) microwave sounder. These are all daily products on a ¼ x ¼ degree latitude/longitude grid covering the continental United States (CONUS).The SSDF algorithm infers a value for each grid point based on nearby and distant values of the input Level-2 datasets and estimates of the variance of those values, with lower variances given higher weight. Performing the data fusion of two (or more) remote sensing datasets that estimate the same physical state involves four major steps: (1) Filtering input data; (2) Matching the remote sensing datasets to an in situ dataset, taken as a truth estimate; (3) Using these matchups to characterize the input datasets via estimation of their bias and variance relative to the truth estimate; (4) Performing the spatial statistical data fusion. We note that SSDF can also be performed on a single remote sensing input dataset. The SSDF algorithm only ingests the bias-corrected estimates, their latitudes and longitudes, and their estimated variances; the algorithm is agnostic as to which dataset or datasets those estimates, latitudes, longitudes, and variances originated from.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.