Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,018
datasets available to search
ShareScore release 0.9.0
Dataset results
3,018 results for “aire”
ISLSCP II Air-Sea Carbon Dioxide Gas Exchange
This data set contains the calculated net ocean-air carbon dioxide (CO2) flux and sea-air CO2 partial pressure (pCO2) difference. The estimates are based on approximately one million measurements made for the pCO2 in surface waters of the global ocean since the International Geophysical Year, 1956-1959. Only the ocean water pCO2 values measured using direct gas-seawater equilibration methods were used. The results represent the climatological distributions under non-El Nino conditions. Since the measurements were made in different years, during which the atmospheric pCO2 was increasing, they were corrected to a single reference year (arbitrarily chosen to be 1995) on the basis of the following assumptions: -Surface waters in subtropical gyres mix vertically at slow rates with subsurface waters due to the presence of strong stratification at the base of the mixed layer. This will allow a long contact time with the atmosphere to exchange CO2. Therefore, their CO2 chemistry tends to follow the atmospheric CO2 increase. Accordingly, the pCO2 measured in a given month and year is corrected to the same month of the reference year 1995 using changes in the atmospheric CO2 concentration occurred during this period.-Oceanic pCO2 measurements made after the beginning of 1979 have been corrected to 1995 using the atmospheric CO2 concentration data from the GLOBALVIEW-CO2 database (2000), in which the zonal mean atmospheric concentrations (for each 0.05 in sine of latitude) within the planetary boundary layer are summarized for each month since 1979 to 2000.-Pre-1979 oceanic pCO2 data were corrected to 1979 using the annual mean trend for the global mean atmospheric CO2 concentration constructed from the Mauna Loa data of Keeling and Whorf (2000), and then from 1979 to 1995 using the GLOBALVIEW-CO2 database. -Measurements for pCO2 made in the following areas have been corrected for the time of observation; 45 degrees N, 50 degrees S, in the Atlantic Ocean, north of 50 degrees S in the Indian Ocean, 40 degrees N, 50 degrees S in the western Pacific west of the date line, and 40 degrees N, 60 degrees S, in the eastern Pacific east of the date line.
Sounder SIPS: AQUA AIRS IR-only Level 2 CLIMCAPS: Cloud Cleared Radiances V2 (SNDRAQIL2CCPCCR) at GES DISC
WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS CLIMCAPS Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km. Cloud-Cleared Radiances contain calibrated, geolocated channel-by-channel AIRS infrared radiances (milliWatts/m2/cm-1/steradian) that would have been observed if there were no clouds in the FOV.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Aqua/AIRS L2 Near Real Time (NRT) Cloud-Cleared Infrared Radiances (AIRS-only) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) Level 2 Near Real Time (NRT) Cloud-Cleared Infrared Radiances (AIRS-only) product (AIRS2CCF_NRT_7.0) differs from the routine product (AIRS2CCF_7.0) in four ways to meet the three hour latency requirements of the Land Atmosphere NRT Capability Earth Observing System (LANCE): (1) The NRT granules are produced without previous or subsequent granules if those granules are not available within 5 minutes, (2) the predictive ephemeris/attitude data are used rather than the definitive ephemeris/attitude, (3) if the forecast surface pressure is unavailable, a surface climatology is used, and (4) no ice cloud properties retrievals are performed. The consequences of these differences are described in the AIRS Near Real Time (NRT) data products document. The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is produced using AIRS IR only because the radiometric noise in AMSU channel 4 started to increase significantly (since June 2007). Cloud-Cleared Radiances contain calibrated, geolocated channel-by-channel AIRS infrared radiances (milliWatts/m2/cm-1/steradian) that would have been observed within each AMSU footprint if there were no clouds in the FOV and produced along with the AIRS Standard Product, as they are the radiances used to retrieve the Standard Product. Nevertheless, they are an order of magnitude larger in data volume than the remainder of the Standard Products and, many Standard Product users are expected to have little interest in the Cloud Cleared Radiance. For these reasons they are a separate output file. The AIRS2CCF_NRT_7.0 products are stored in files (often referred to as "granules") that contain 6 minutes of data, 30 footprints across track by 45 lines along track.
Aqua/AIRS L3 Monthly Standard Physical Retrieval (AIRS+AMSU) 1 degree x 1 degree V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) AIRS constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Level 3 Monthly Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts. Each file covers a calendar month. The mean values are simply the arithmetic means of the daily products, weighted by the number of input counts for each day in that grid box. The geophysical parameters have been averaged and binned into 1 x 1 deg grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.
Aqua/AIRS L2 Cloud-Cleared Infrared Radiances (AIRS-only) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is produced using AIRS IR only because the radiometric noise in several AMSU channels started to increase significantly (since June 2007). Cloud-Cleared Radiances contain calibrated, geolocated channel-by-channel AIRS infrared radiances (milliWatts/m2/cm-1/steradian) that would have been observed within each AMSU footprint if there were no clouds in the FOV and produced along with the AIRS Standard Product, as they are the radiances used to retrieve the Standard Product. Nevertheless, they are an order of magnitude larger in data volume than the remainder of the Standard Products, and many Standard Product users are expected to have little interest in the Cloud Cleared Radiance. For these reasons they are a separate output file, but like the Standard Product, are generated at all locations.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
AIRS/Aqua L2G Precipitation Estimate V006 (AIRG2SSD) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This precipitation estimate from AIRS is using TOVS-like algorithm, and is intended for merging into the precipitation product of the Global Precipitation Climatology Project (GPCP). The precipitation estimate from AIRS Level 2 Support product, which are 6-min swath granules (240 per day) are combined here into one daily "Level 2G" global grid with dimensions (24x1440x720). Thus every hour is a "layer", and the resulting grid cell size is 0.25 degree (~25 km). Thus the grid size is made to fit TRMM products. Since AIRS precipitation is retrieved at AMSU footprint resolution, which is about 45 km at nadir, many grid cells in this 0.25-deg grid are "empty". The data are stored such that the first line is the South Pole. The geolocation information for every hour-layer is also provided in the file.
Aqua/AIRS L3 Daily Support Product (AIRS+AMSU) 1 degree x 1 degree V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) AIRS constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The L3 support products are similar to the L3 standard products but contain fields which are not fully validated, or are inputs or intermediary values. The value for each grid box is the sum of the values that fall within the 1x1 area divided by the number of points in thebox.
AIRS/Aqua L3 Daily Standard Physical Retrieval (AIRS+AMSU+HSB) 1 degree x 1 degree V006 (AIRH3STD) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRX3STD. However, it contains science retrievals that use the Humidity Sounder for Brazil (HSB). Because the HSB instrument lived only from September 2002 through January 2003 when it terminally failed, the data set covers these five months only. The AIRS Level 3 Daily Gridded Product contains standard retrieval means, standard deviations and input counts. Each file covers a temporal period of 24 hours for either the descending (equatorial crossing North to South @1:30 AM local time) or ascending (equatorial crossing South to North @1:30 PM local time) orbit. The data starts at the international dateline and progresses westward (as do the subsequent orbits of the satellite) so that neighboring gridded cells of data are no more than a swath of time apart (about 90 minutes). The two parts of a scan line crossing the dateline are included in separate L3 files, according to the date, so that data points in a grid box are always coincident in time. The edge of the AIRS Level 3 gridded cells is at the date line (the 180E/W longitude boundary). When plotted, this produces a map with 0 degrees longitude in the center of the image unless the bins are reordered. This method is preferred because the left (West) side of the image and the right (East) side of the image contain data farthest apart in time. The gridding scheme used by AIRS is the same as used by TOVS Pathfinder to create Level 3 products. The daily Level 3 products have gores between satellite paths where there is no coverage for that day. The geophysical parameters have been averaged and binned into 1 x 1 grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.
AIRS/Aqua L3 Daily Support Product (AIRS+AMSU) 1 degree x 1 degree V006 (AIRX3SPD) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The L3 support products are similar to the L3 standard products but contain fields which are not fully validated, or are inputs or intermediary values. Because no quality control information is available for some of these fields, values from failed retrievals may be included.
Sounder SIPS: AQUA AIRS IR + MW Level 2: Atmospheric state at Standard Pressure Levels derived from CLIMCAPS V2.1 (SNDRAQIML2PLEVCPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder)/AMSU (Advanced Microwave Sounding Unit) instruments aboard the Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. This file contains the fixed Pressure Level product (PLEV) variables derived from the CLIMCAPS algorithm using data. They include including gas mixing ratio profiles, column totals, surface values, tropopause properties, and relative humidity, together with per-field quality flagging. The profiles are specified at the surface and layer boundaries and are estimated from layer amounts using the L2 algorithmAn AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
Aqua/AIRS L2 Standard Physical Retrieval (AIRS+AMSU+HSB) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRX2RET. However, it contains science retrievals that use the HSB. Because the HSB instrument lived only from September 2002 through January 2003 when it terminally failed, the data set covers these five months only. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. Estimates of the errors associated with these quantities is also part of the Standard Product. The temperature profile vertical resolution is 28 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at 14 atmospheric layers between 1100 mb and 50 mb. The horizontal resolution is 50 km. An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
AIRS/Aqua L1B Infrared (IR) geolocated and calibrated radiances V005 (AIRIBRAD) at GES DISC
WARNING: On 2021/09/23 the EOS Aqua executed a Deep Space Maneuver (DSM). In the DSM, the spacecraft is turned such that the normal Earth field of regard is deep space.The thermal impact of the DSM caused a shift of the centroids of spectral response functions (SRF) of about 1% of the width of the SRF, equivalent to a frequency shift of 9 parts per million. This shift is reflected in the “spectral_freq” parameter (observed frequencies) in the L1b v5 files for each 6 minute granule. The magnitude of the effect on brightness temperatures (BT) depends on the spectral gradient of each channel. Maximum BT shifts are approximately +- 0.5 K, although many channels experience far smaller BT shifts. Approximately 1803 channels have BT shifts of less than 0.1 K and 575 channels are now shifted in BT by more than 0.1 K, while 231 of these channels have BT shifts greater than 0.2 K.Users of the L1b v5 product who are concerned that these shifts may impact their science investigations and applications are encouraged to switch to the AIRS L1c v6.7.4 product, which, among many other improvements, converts the spectra to a fixed frequency grid. END OF WARNING.The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS Infrared (IR) level 1B data set contains AIRS calibrated and geolocated radiances in milliWatts/m^2/cm^-1/steradian for 2378 infrared channels in the 3.74 to 15.4 micron region of t he spectrum. The AIRS instrument is co-aligned with AMSU-A so that successive blocks of 3 x 3 AIRS footprints are contained within one AMSU-A footprint. The AIRIBRAD_005 products are stored in files (often referred to as "granules") that contain 6 minutes of data, 90 footprints across track by 135 lines along track.
AIRS/Aqua L2G Precipitation Estimate (AIRS-only) V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. This precipitation estimate from AIRS IR only is using a TOVS-like algorithm, and is intended for merging into the precipitation product of the Global Precipitation Climatology Project (GPCP). The precipitation estimate from AIRS Level 2 Support product, which are 6-min swath granules (240 per day) are combined here into one daily "Level 2G" global grid with dimensions (24x1440x720). Thus every hour is a "layer", and the resulting grid cell size is 0.25 degree (~25 km). Thus the grid size is made to fit TRMM products. Since AIRS precipitation is retrieved at AMSU footprint resolution, which is about 45 km at nadir, many grid cells in this 0.25-deg grid are "empty". The data are stored such that the first line is the South Pole. The geolocation information for every hour-layer is also provided in the file.
BOREAS AFM-05 Level-1 Upper Air Network Data, R1
The BOREAS AFM-05 team collected and processed data from the numerous radiosonde flights during the project. The goals of the AFM-05 team were to provide large scale definition of the atmosphere by supplementing the existing AES aerological network, both temporally and spatially. This data set includes basic upper-air parameters collected from the network of upper-air stations during the 1993, 1994, and 1996 field campaigns over the entire study region.
AIRS/Aqua L3 8-day Standard Physical Retrieval (AIRS+AMSU+HSB) 1 degree x 1 degree V006 (AIRH3ST8) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is similar to AIRX3ST8. However, it contains science retrievals that use the Humidity Sounder for Brazil (HSB). Because the HSB instrument lived only from September 2002 through January 2003 when it terminally failed, the data set covers these five months only. The AIRS Level 3 8-Day Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts. Each file covers an 8-day period, or one-half of the Aqua orbit repeat cycle. The mean values are simply the arithmetic means of the daily products, weighted by the number of input counts for each day in that grid box. The geophysical parameters have been averaged and binned into 1 x 1 deg grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.
AIRS/Aqua L2 CO2 in the free troposphere (AIRS+AMSU) V005 (AIRX2STC) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS Carbon Dioxide (CO2) Standard Retrieval Product consists of retrieved estimates of CO2, plus estimates of the errors associated with the retrieval. In contrast to AIRX2RET, the horizontal resolution of this standard product is about 110 km (1x1 degree). An AIRS granule has been set as 6 minutes of data, 15 footprints cross track by 22 lines along track.
ABoVE: Landsat Tundra Greenness and Summer Air Temperatures, Arctic Tundra, 1985-2016
This dataset provides annual tundra greenness and summer air temperatures at a resolution of 50 km over the pan-Arctic tundra biome above 31.5 degrees over the time period 1985 to 2016. Annual tundra greenness was assessed using the maximum Normalized Difference Vegetation Index (NDVImax) derived from surface reflectance measured by sensors on the Landsat satellites. Summer air temperatures were quantified using the Summer Warmth Index (SWI) derived from an ensemble of five global temperature datasets. Tabular data include NDVImax, SWI, and estimates of uncertainty using Monte Carlo simulations at 45,334 vegetated sampling sites. Raster data provide (1) annual SWI from 1985 to 2016; (2) temporal trends in annual NDVImax and SWI from 1985 to 2016 and from 2000 to 2016; and (3) temporal correlations between annual NDVImax - SWI during these two periods. Each raster also includes estimates of uncertainty that were generated using Monte Carlo simulations. This dataset provides a new pan-Arctic product for assessing inter-annual variability in tundra using moderate resolution observations from the Landsat satellites.
Aqua AIRS Level 2 JoSFRA Retrieval Standard: Atmosphere cloud and surface geophysical state per footprint V2 at GES DISC
The Joint Single Footprint Retrieval Algorithm (JoSFRA) Level-2 geophysical parameters include estimates of atmospheric temperature and water vapor profiles, cloud properties, and surface temperature. These are retrieved from infrared spectra observed by the Atmospheric Infrared Sounder (AIRS) instrument on the Aqua satellite. AIRS is a grating spectrometer aboard Aqua, the second Earth Observing System (EOS) polar-orbiting platform. AIRS is co-boresited with the Advanced Microwave Sounding Unit (AMSU) also on Aqua. Horizontal resolutions are 50 km for AMSU and 13.5 km for AIRS. The JoSFRA algorithm uses an optimal-estimation scheme and retrieves geophysical quantities from AIRS thermal infrared spectra at their native horizontal resolution. Cloud observations from MODIS are used in the forward model without recourse to a cloud-cleared state. JOSFRA retrievals provide improved spatial resolution (13.5 km vs 50 km for cloud-cleared retrievals) and information content quantification, making them well-suited for process studies. JoSFRA retrievals are particularly useful in cases where high resolution (finer than 45 km) is needed or is beneficial, such as regions of strong horizontal gradients in water vapor. Use of JoSFRA retrievals is recommended under medium to low cloud cover. AIRS observations provide near-global coverage twice daily (around 1:30 am and pm local time) since August 30, 2002. An AIRS granule includes 6 minutes of data, 90 AIRS (30 AMSU) footprints across the orbit track by 135 AIRS (45 AMSU) footprints along track. Each day includes 240 granules, with an orbit repeat cycle of approximately 16 days. For the initial release of Version 2 JoSFRA, a limited test data set is provided. Future releases will expand the dataset. The initial dataset includes full global coverage data for two 5-day periods: January 13-17, 2011 and July 13-17, 2011, the Marine ARM GPCI Investigation of Clouds (MAGIC) (Lewis and Teixeira, EOS, 2015) test campaign in the Pacific Ocean with all 6-minute granules that overlap the box bounded by 20-35 degrees North latitude and 120-160 West longitude, June 1, 2012 – September 30, 2013, select granules from the years 2002-2007 where correlative data were available. The locations include Dept. of Energy (DOE) Atmospheric Radiation Measurement (ARM) sites at the North Slope of Alaska (NSA), Southern Great Plains (SGP), and Tropical Western Pacific (TWP), as well as scientific field campaigns.
AIRS/Aqua L3 8-day CO2 in the free troposphere (AIRS-only) 2.5 degrees x 2 degrees V005 (AIRS3C28) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is the AIRS mid-tropospheric Carbon Dioxide (CO2) Level 3 8-day Gridded Retrieval, from the AIRS instrument on board of Aqua satellite. It is 8-day gridded data, at 2.5x2 deg (lon)x(lat) grid cell size. The data is in mole fraction units (data x 10^6 =ppm in volume). This is a total tropospheric column property. The file format is HDF-EOS 2.12 corresponding to HDF4. This AIRS mid-tropospheric CO2 Level 3, 8-day, Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts as well as the latitude and longitude arrays giving the centers of the grid boxes. Each file covers an 8-day period. The mean values are simply the arithmetic means of the individual CO2 retrievals which fall within that grid box over the 8-day period. The mid-tropospheric CO2 retrievals have been averaged and binned into 2.5 x 2 deg grid cells, from -180.0 to +180.0 deg longitude and from -60.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean.
Sounder SIPS: AQUA AIRS IR + MW Level 2 CLIMCAPS: Retrieved atmospheric state V2.1 (SNDRAQIML2CPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) and AMSU (Advanced Microwave Sounding Unit). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS in combination with the AMSU constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km.The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.