Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2,322
datasets available to search
ShareScore release 0.9.0
Dataset results
2,322 results for “precipitations”
TRMM (TMPA) Precipitation L3 1 day 0.25 degree x 0.25 degree V7 (TRMM_3B42_Daily) at GES DISC
TMPA (3B42_Daily) dataset have been discontinued as of Dec. 31, 2019, and users are strongly encouraged to shift to the successor IMERG dataset (doi: 10.5067/GPM/IMERGDF/DAY/06).This daily accumulated precipitation product is generated from the research-quality 3-hourly TRMM Multi-Satellite Precipitation Analysis TMPA (3B42). It is produced at the NASA GES DISC, as a value added product. Simple summation of valid retrievals in a grid cell is applied for the data day. The result is given in (mm). The beginning and ending time for every daily granule are listed in the file global attributes, and are taken correspondingly from the first and the last 3-hourly granules participating in the aggregation. Thus the time period covered by one daily granule amounts to 24 hours, which can be inspected in the file global attributes. Counts of valid retrievals for the day are provided for every variable, making it possible to compute conditional and unconditional mean precipitation for grid cells where less than 8 retrievals for the day are available.Efforts have been made to make the format of this derived product as similar as possible to the new Global Precipitation Measurement CF-compliant file format.The information provided here on the TRMM mission, and on the original 3-hr 3B42 product, remain relevant for this derived product. Note, however, this product is in netCDF-4 format.The following describes the derivation in more details.The daily accumulation is derived by summing *valid* retrievals in a grid cell for the data day. Since the 3-hourly source data are in mm/hr, a factor of 3 is applied to the sum. Thus, for every grid cell we have Pdaily = 3 * SUM{Pi * 1[Pi valid]}, i=[1,Nf]Pdaily_cnt = SUM{1[Pi valid]}where:Pdaily - Daily accumulation (mm)Pi - 3-hourly input, in (mm/hr)Nf - Number of 3-hourly files per day, Nf=81[.] - Indicator function; 1 when Pi is valid, 0 otherwisePdaily_cnt - Number of valid retrievals in a grid cell per day.Grid cells for which Pdaily_cnt=0, are set to fill value in the Daily files.Note that Pi=0 is a valid value.On occasion, the 3-hourly source data have fill values for Pi in a very few grid cells. The total accumulation for such grid cells is still issued, inspite of the likelihood that thus resulting accumulation has a larger uncertainty in representing the "true" daily total. These events are easily detectable using "counts" variables that contain Pdaily_cnt, whereby users can screen out any grid cells for which Pdaily_cnt less than Nf.There are various ways the accumulated daily error could be estimated from the source 3-hourly error. In this release, the daily error provided in the data files is calculated as follows. First, squared 3-hourly errors are summed, and then square root of the sum is taken. Similarly to the precipitation, a factor of 3 is finally applied:Perr_daily = 3 * { SUM[ (Perr_i * 1[Perr_i valid])^2 ] }^0.5 , i=[1,Nf]Ncnt_err = SUM( 1[Perr_i valid] )where:Perr_daily - Magnitude of the daily accumulated error power, (mm)Ncnt_err - The counts for the error variableThus computed Perr_daily represents the worst case scenario that assumes the error in the 3-hourly source data, which is given in mm/hr, accumulates first within the 3-hour period of the source data, and then continues to accumulate during the day. These values, however, can easily be converted to root mean square error estimate of the rainfall rate:rms_err = { (Perr_daily/3) ^2 / Ncnt_err }^0.5 (mm/hr)This estimate assumes that the error given in the 3-hourly files is representative of the error of the rainfall rate (mm/hr) within the 3-hour window of the files, and it is random throughout the day. Note, this should be interpreted as the error of the rainfall rate (mm/hr) for the day, not the daily accumulation.
GPM MHS on METOP-C (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFMETOPCMHS) at GES DISC
Version 07 is the current version of the data set. 3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM SSM/I on F10 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 12 km V07 (GPM_2AGPROFF10SSMI_CLIM) at GES DISC
Version 7 is the current version of the data set. Older versions will no longer be available and have been superseded by the current version.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
GPM ATMS on NOAA-20 (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA20ATMS) at GES DISC
Version 07 is the current version of the data set. 3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM SSMIS on F16 (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFF16SSMIS) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
TRMM (TMPA-RT) Near Real-Time Precipitation L3 3 hour 0.25 degree x 0.25 degree V7 (TRMM_3B42RT) at GES DISC
TMPA (3B42RT) dataset have been discontinued as of Dec. 31, 2019, and users are strongly encouraged to shift to the successor IMERG datasets (doi: 10.5067/GPM/IMERG/3B-HH-E/06, 10.5067/GPM/IMERG/3B-HH-L/06).These data were output from the TRMM Multi-satellite Precipitation Analysis (TMPA), the Near Real-Time (RT) processing stream. The latency was about seven hours from the observation time, although processing issues may delay or prevent this schedule. Users should be mindful that the price for the short latency of these data is the reduced quality as compared to the research quality product.Each file is a snapshot considered to represent the three-hour period centered on the "nominal" file time. So, e.g., 00 UTC nominally represents the period from 2230 UTC of the previous day to 0130 UTC of the current day. Estimates outside the band 50 degree N-S are considered highly experimental. GES DISC initially receives these data from the Precipitation Processing System (PPS) in binary format. However, before archiving, the data are scaled to real numbers, and re-arranged to a standard grid so that the first grid cell is at 180W, 60S. Thus formatted, data are stored into CF-1.6 compliant netCDF-4 files and archived. This format is machine-independent, self-explanatory, provides extremely efficient seamless compression, and gives various options for previewing the data without downloading it.Apart from these technical differences, all other science content details remain the same, and users are strongly encouraged to read the provider's documentation that is linked to from here.
NASA MEASURES Precipitation Ensemble based on TMI TRMM NASA PPS L1C V05 Tbs 1-orbit L2 Swath 5x5km V1 (PRECIP_TMI_TRMM) at GES DISC
The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) flown on the TRMM satellite. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 1997 to 2015 with one file per orbit.
GPM GROUND VALIDATION ADVANCED MICROWAVE PRECIPITATION RADIOMETER (AMPR) IPHEX V2
The GPM Ground Validation Advanced Microwave Precipitation Radiometer (AMPR) IPHEx dataset was acquired by the AMPR instrument flown aboard the high altitude ER-2 aircraft during the IPHEx field campaign in North Carolina from May 1, 2014 through June 14, 2014. The goal of IPHEx was to evaluate the accuracy of satellite precipitation measurements and use the collected data for hydrology models in the region. These files include the Level 2B calibrated and georeferenced brightness temperature for the four AMPR-observed frequencies (10, 19, 37, 85 GHz). These data are archived in a netCDF-4 format that contains the calibrated brightness temperatures in addition to ER-2 aircraft navigation and instrument scene georectification variables. Corresponding browse imagery are also available in JPG format. A set of Python software has been developed for reading, plotting, and providing some additional analysis capabilities.
GPM SSMIS on F18 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFF18SSMIS_DAY_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM Ground Validation Global Satellite Mapping of Precipitation (GSMaP) IFloodS V1
The GPM Ground Validation Global Satellite Mapping of Precipitation (GSMaP) IFloodS dataset consists of rainfall rate estimates from the GSMaP project. The GSMaP global rain rate maps are derived by a collection of algorithms that utilize microwave (MW) radiometer data and geostationary Infrared (IR) data. The GSMaP Precipitation data product is provided on a 0.1 degree spatial resolution every hour and was made available for use during the Global Precipitation Measurement (GPM) Ground Validation Iowa Flood Studies (IFloodS) field campaign. These data are available in netCDF-4 and binary formats from April 22, 2013 through June 30, 2013. The near real-time GSMaP data can be obtained from the JAXA GSMaP web page.
GPM ATMS on NOAA-20 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA20ATMS_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
Global Monthly Precipitation, 1900-1999 (Hulme)
An historical monthly precipitation dataset for global land areas from 1900 to 1996, gridded at two different resolutions (2.5 degrees latitude by 3.75 degrees longitude and 5 degrees latitude/longitude).
LBA-ECO LC-09 Daily Precipitation for Altamira and Santarem, Para, Brazil: 1961-1998
This data set reports daily total precipitation data retrieved from Brazilian National Institute of Meteorology (INMET) network for three stations near two Amazonian research sites: Altamira, and Santarem, from 1961-1998.Daily precipitation totals are provided in one comma-separated ASCII file for three stations in Para, including two sites in Altamira: Altamira City and on the Transamazon Highway at Km 100 near Medicilandia (operated by EMBRAPA); and, one site in Santarem: Taperinha. Data availability varies by station (sublocation): Altamira City from 1961-1990, Transamazon Km 100 from 1982-1998, and Taperinha from 1983-1992.
GPM DPR Precipitation Profile 1 Day Descending 0.25 degree x 0.25 degree V07 (GPM_3DPR_DES) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.. The Level 3 DPR algorithm accumulates instantaneous precipitation estimates from the Level 2 retrieval algorithms into grids over a day and month time span. There are two grid resolutions: 5.0 degrees and 25 kms. For each grid box, the core statistics are the number of measurements, mean, and standard deviation. Most variables are also conditioned on surface type and precipitation type with other three-dimensional fields adding the height above the ellipsoid. Unless otherwise specified, the means are conditioned on precipitation being present (rain rate > 0). For the daily product, the mean square statistic is saved rather than the standard deviation. In addition to the daily and monthly products is a simplified joint daily product that contains a subset of the fields from the full daily product. The Level 3 DPR products present the user with summary information over daily and monthly time periods. These gridded products are in a convenient gridded form and can be used easily in comparisons with other satellite and ground data.
SAFARI 2000 SSM/I GPROF 6.0 Precipitation Data, 0.5-Deg, 1999-2001
The GPROF 6.0 Pentads data set contains 5-day (pentad) averages of the GPROF 6.0 Gridded Orbits. The GPROF(Goddard Profiling Algorithm) data set contains a suite of 9 products providing instantaneous, gridded values of precipitation totals for each granule of the SSM/I (Special Sensor Microwave/Imager) data over the roughly 14-year period July 1987 through the present. Even though there have been at least two satellites for the entire period, sampling is sufficiently sparse that the data are averaged for pentads, then the pentads are smoothed with a 1-2-3-2-1 time-weighting. The last two pentads are unevenly weighted since the last (or last two) pentads in the average are not yet available. Consequently, the last two pentads must be recomputed when the next pentad becomes available.The data set prepared for SAFARI cover the years 1999, 2000, and 2001.The main refereed citations for the data set are Kummerow et al. (1996)and Olson et al. (1999)
GPM SSMI on F13 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFF13SSMI_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM AMSR-2 on GCOM-W1 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFGCOMW1AMSR2_DAY_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
NASA MEASURES Precipitation Ensemble based on SSM/I DMSP F11 NASA PPS L1C V06 Tbs 1-orbit L2 Swath 12x12km V1 (PRECIP_SSMI_F11) at GES DISC
The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Special Sensor Microwave/Imager (SSM/I) flown on the US Defense Meteorological Satellite Program (DMSP) F11 mission. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 1991 to 2000 with one file per orbit.
GPM PR on TRMM Reflectivity, Precipitation Statistics, Histograms, at Surface and Fixed Heights, Descending, 1 day 5x5 and 0.25x0.25 degree V07 (GPM_3PR_DES) at GES DISC
This a new (GPM-formated) TRMM product. There is no equivalent in the old TRMM suite of products.Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.This product consists of Descending daily statistics of the PR measurements at both a low (5 degrees x 5 degrees) and a high (0.25 degrees x 0.25 degrees) horizontal resolution. The low resolution grids are in the Planetary Grid 1 structure and include 1) mean and standard deviation of the rain rate, reflectivity, path-integrated attenuation (PIA), storm height, Xi, bright band height and the NUBF (Non-Uniform Beam Filling) correction; 2) rain fractions; 3) histograms of the storm height, bright-band height, snow-ice layer, reflectivity, rain rate, path-attenuation and NUBF correction; 4) correlation coefficients. The high resolution grids are in the Planetary Grid 2 structure and contain mean rain rate along with standard deviation and rain fractions.The grids are in the Planetary Grid 2 structure matching the Dual-frequency PR on the core GPM observatory that covers 67S to 67N degrees of latitudes. The low resolution 5x5 deg grid covers 70S to 70N. Areas beyond the ±40 degrees of latitudes are padded with empty grid cells.
GPM SSMIS on F16 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFF16SSMIS_DAY_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.