Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

509

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

509 results for “Version 2”

Learn how ShareScore rates datasets ↗
nasa28/100

CLPX-Ground: ISA Snow Pit Measurements, Version 2

This data set consists of snow pit data from nine study areas, within three larger-scale areas in northern Colorado (Fraser, North Park, and Rabbit Ears Meso-cell Study Areas (MSAs)). The study areas range from low-relief (flat topography) unforested areas with shallow snow covers, to high-relief (complex topography) densely forested areas with deep snow covers.

restrictednotspecifiedApr 2025View details →
nasa28/100

SWOT Level 2 River Cycle-Averaged Data Product, Version C

Cycle average and aggregation of river reach pass data within predefined hydrological basins. Basin for each cycle. Available in Shapefile file format.<br>Please note that this collection contains SWOT Version C science data products.

restrictednotspecifiedApr 2025View details →
nasa28/100

S-MODE MOSES Level 2 Atmospherically-Corrected Sea Surface Temperature Version 1

This dataset contains airborne sea surface temperature (SST) measurements from the Sub-Mesoscale Ocean Dynamics Experiment (S-MODE). Data were collected approximately 300 km offshore of San Fransisco during a pilot campaign in October 2021, and an intensive operating period (IOP) in Fall 2022. S-MODE aims to understand how ocean dynamics acting on short spatial scales influence the vertical exchange of physical and biological variables in the ocean. The Multiscale Observing System of the Ocean Surface (MOSES) is an aerial observing system that primarily uses a longwave infrared (LWIR) camera to record SST at a resolution of several meters. Individual images are mosaiced together to provide a synoptic map of the sample domain covering approximately 200 km. MOSES is mounted on the B200 aircraft which flies daily surveys of the field domain during deployments. Data are available in netCDF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

VEMAP 2: U.S. Monthly Climate, 1895-1993, Version 2

The Vegetation/Ecosystem Modeling and Analysis Project (VEMAP) Phase 2 has developed a data set of ~100-year gridded monthly and daily time series of climate for the conterminous United States that includes realistic interannual variability. This data set has been used to compare time-dependent ecological responses of biogeochemical and coupled biogeochemical-biogeographical models to historical time series and projected scenarios of climate, atmospheric CO2, and N-deposition. Development of the data set is reported in Kittel et al. (1997). As in the VEMAP 1 database, the historical data set has (1) daily and monthly versions; (2) physical consistency among variables on a daily basis; (3) consistency between climate and topography; and (4) needed input variables for VEMAP2 models (minimum and maximum temperature, precipitation, vapor pressure, and solar radiation) (Kittel et al. 1995). This historical monthly climate data set was designed to be concatenated with the /VEMAP/vemap.html">VEMAP 2: U.S. Monthly Climate Change Scenarios, Version 2 data set to create a single climate series from 1895 - ~2100. Users are requested to confer with the NCAR VEMAP Data Group to ensure that the intended application of the data set is consistent with the generation and limitations of the data. Data Citation The data set should be cited as follows: Kittel, T. G. F., N. A. Rosenbloom, C. Kaufman, J. A. Royle, C. Daly, H. H. Fisher, W. P. Gibson, S. Aulenbach, D. N. Yates, R. McKeown, D. S. Schimel, and VEMAP 2 Participants. 2000. VEMAP 2: U. S. Monthly Climate, 1895-1993, Version 2. Available on-line from Oak Ridge National Laboratory Distributed Active Archive Center, Oak Ridge, Tennessee, U.S.A.

restrictednotspecifiedApr 2025View details →
nasa28/100

SWOT Simulated Level-2 KaRIn SSH from GLORYS for Cal/Val Version 1

This dataset provides simulated sea surface height data product that resembles data which will be collected by KaRIn. Swaths span 60 km on both sides of nadir with a nadir gap. Product provides sea surface height, sea surface height anomaly, wind speed, significant waveheight, on a geographically fixed, swath-aligned 2x2 km2 grid, as well as sea surface height on a 250x250 m2 native grid. SSH data produced by GLORYS were rendered from their native output format into the format prescribed in the SWOT L2 SSH PDD to aid ongoing data product development and to benefit future users of data produced during operational phases of the SWOT mission.

restrictednotspecifiedApr 2025View details →
nasa28/100

MetOp-B ASCAT Scatterometer Inter-Calibrated ESDR Level 2 Ocean Surface Equivalent Neutral Wind Vectors and Wind Stress Vectors Version 1.1

This dataset contains ocean surface wind vectors (equivalent neutral and true 10m) and wind stress vectors derived from satellite-based scatterometer observations (the MetOp-B ASCAT scatterometer), representing the first science quality release of these data (post-provisional after v1.0) funded under the MEaAUREs program. This product from MetOp-B ASCAT has been intercalibrated with similar scatterometer measurements from instruments on the MetOp-A, ScatSat-1, and QuikScat satellites (all of which can be found on the MEaSUREs OSVW Project Page), and if used together create an unbroken record of winds from 1999 to 2022. The wind vector and stress retrievals are provided on a non-uniform grid within the swath (Level 2 (L2) products) at 12.5 km pixel resolution. Each L2 file corresponds to a specific orbital revolution number, which begins at the southernmost point of the ascending orbit. The thumbnail shows data for two orbits - using all orbits for a single day will provide global coverage.<br><br>The dataset represents the first science quality release funded under the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. Version 1.1 provides a set of updates and improvements from version 1.0, including: 1) increased data coverage, 2) improved quality control, and 3) new global metadata attributes featuring revolution number, equator crossing longitude, and equator crossing time (UTC). The primary purpose of this release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST).

restrictednotspecifiedApr 2025View details →
nasa28/100

ATom: Merged Atmospheric Chemistry, Trace Gases, and Aerosols, Version 2

This dataset provides information on greenhouse gases and human-produced air pollution, including atmospheric concentrations of carbon dioxide (CO2), methane (CH4), tropospheric ozone (O3), and black carbon (BC) aerosols, collected during airborne campaigns conducted by NASA's Atmospheric Tomography (ATom) mission. This dataset includes merged data from all instruments plus additional data such as numbered profiles and distance flown. Merged data products have been created for seven different aggregation intervals (1 second, 10 seconds, and 5 instrument-specific intervals). In the case of data obtained over longer time intervals (e.g., flask data), the merge files provide (weighted) averages to match the sampling intervals. This comprehensive dataset will be used to improve the representation of chemically reactive gases and short-lived climate forcers in global models of atmospheric chemistry and climate.

restrictednotspecifiedApr 2025View details →
nasa28/100

SatCORPS CERES GEO Edition 4 Meteosat-7 Full Disk Version 2

CER_GEO_Ed4_MET07_FD_V02 is the Satellite Cloud and Radiation Property retrieval System (SatCORPS) Clouds and the Earth's Radiant Energy System (CERES) Geostationary Satellite (GEO) Edition 4 Meteosat-7 over the Full Disk (FD) Version 2 data product. Data was collected using the Meteosat Visible Infra-Red Imager instrument on the Meteosat-7 platform.This data set comprises cloud micro-physical and radiation properties derived hourly from Meteosat-7 geostationary satellite imager data using the Langley Research Center (LaRC) SATCORPS algorithms supporting the CERES project. Each active geostationary satellite's cloud micro-physical and radiation properties are merged to create hourly global cloud properties that estimate fluxes between CERES instrument measurements to account for the changing diurnal cycle. The data set is arranged as files for each hour and in netCDF-4 format. The observations are at 4 km resolution (at nadir) and are sub-sampled to 8 km.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.

restrictednotspecifiedApr 2025View details →
nasa28/100

Nenana Ice Classic: Tanana River Ice Annual Breakup Dates, Version 2

The Tanana river in the Interior of Alaska usually freezes over during October and November. The ice continues to grow throughout the winter accumulating an average maximum thickness of about 110 cm, depending upon winter weather conditions.The Nenana Ice Classic competition began in 1917 when railroad engineers bet a total of 800 dollars, winner takes all, guessing the exact time (month, day, hour, minute) ice on the Tanana River would break up. Each year since then, Alaska residents have guessed at the timing of the river breakup. A tripod, connected to an on-shore clock with a string, is planted in two feet of river ice during river freeze-up in October or November. The following spring, the clock automatically stops when the tripod moves as the ice breaks up. The time on the clock is used as the river ice breakup time.Many factors influence the river ice breakup, such as air temperature, ice thickness, snow cover, wind, water temperature, and depth of water below the ice. Generally, the Tanana river ice breaks up in late April or early May (historically, April 20 to May 20). The time series of Tanana river ice breakup dates can be used to indicate climate change in the region.

restrictednotspecifiedApr 2025View details →
nasa28/100

Global Landslide Nowcast from LHASA L4 1 day 1 km x 1 km version 2.0.0 (Global_Landslide_Nowcast) at GES DISC

The Global Landslide Nowcast addresses the need for real-time situational awareness of landslide hazard. The Landslide Hazard Assessment for Situational Awareness model (LHASA) combines satellite rainfall estimates from the Global Precipitation Measurement mission (GPM) with soil moisture estimates from the Soil Moisture Active Passive (SMAP) satellite and other factors to produce a map of locations where rainfall-triggered landslide activity is probable. Due to the latency of the rainfall data, the nowcast is a near-real time product with a minimum latency of 5 hours. Although the model could be run every half hour, this archive contains a daily record derived from a retrospective model run.The Global Landslide Nowcast version 2.0.0 retains replaces the heuristic decision tree from version 1.0 with a machine learning model. Instead of merging all factors other than precipitation into a susceptibility map, LHASA 2.0 takes in each variable as a separate input layer. The most important change is the replacement of the categorical nowcast with a probabilistic output. This will enable users to adjust the threshold to suit their specific application and geographic location.

restrictednotspecifiedApr 2025View details →
nasa28/100

Anthropogenic Carbon Emission System, 2012-2017, Version 2

This dataset provides estimates of hourly carbon dioxide (CO2) emissions from the combustion of fossil fuels at 1-km resolution for the coterminous United States (CONUS) covering the years 2012 through 2017. Emissions from the ACES model are reported for ten distinct emissions source sectors: Airports and Aircraft, Commercial Buildings, Electric Power Generation facilities, Industrial point and non-point sources, Commercial Marine Vessels, Nonroad vehicles and equipment, Oil and Gas wells and facilities, Onroad vehicles, Railway engines and yards, and Residential buildings. All emissions are reported hourly on a 1-km x 1-km spatial grid. The data are provided in NetCDF version 4 format.

restrictednotspecifiedApr 2025View details →
nasa28/100

ISLSCP II Global Precipitation Climatology Project Version 2, Monthly Precipitation

The Global Precipitation Climatology Project (GPCP) Version 2 data set includes global, monthly precipitation rates and associated random errors (RMSE), and a monthly precipitation climatology derived as an average from all GPCP data sets from January 1979 to December 1999. The data are derived from measured gauge data and merged with satellite estimates of rainfall. This is a portion of the version 2 GPCP data and covers the ISLSCP II period from 1986 to 1995. There are six data files included with this data set: the original precipitation rates, errors and climatology at 2.5 degrees spatial resolution, and the same data re-gridded to a 1 degree spatial resolution by the ISLSCP II staff.

restrictednotspecifiedApr 2025View details →
nasa28/100

Metop-B ASCAT Inter-Calibrated ESDR Level 2 Observed and Modeled Spatial Derivatives of Surface Wind and Wind Stress Version 1.0

This dataset contains the curl and divergence of ocean surface equivalent neutral wind and wind stress, derived from satellite-based scatterometer observations (the MetOp-B ASCAT scatterometer), representing the first science quality release of these data (post-provisional after v1.0) funded under the MEaSUREs program. This product from MetOp-B ASCAT has been intercalibrated with similar scatterometer measurements from instruments on the MetOp-A, ScatSat-1, and QuikScat satellites, all of which can be found on the MEaSUREs OSVW Project Page. These Level 2 data are provided on a non-uniform grid within the satellite swath at ~12.5 km pixel resolution. Each L2 file corresponds to a specific orbital revolution number, which begins at the southernmost point of the ascending orbit - the thumbnail preview shows data for all orbits over a day (typically 14 orbits). Estimates for the curls and divergences are computed over several spatial domains with varying radii from the point of interest, and included as separate variables.<br><br>The dataset represents the first science quality release funded under the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. The primary purpose of this release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST). This V1.0 of the data was derived from V1.1 of the L2 wind and stress product.

restrictednotspecifiedJun 2025View details →
nasa28/100

Standard Deviation of Monthly Frequency of Dust Storm over Land for Varying Intensities, Based on MODIS Terra Deep Blue Level 2 Aerosol Products MOD04_L2 Collection 6.1, on a Global 0.1 by 0.1 Degree Grid, Level 3 Version 1 (MODFDS_SDV_GLB_L3) at GES DISC

Version 1 is the current version of the dataset.This collection MODFDS_SDV_GLB_L3 provides level 3 standard deviation of climatological monthly frequency of dust storms (FDS) over land from 175°W to 175°E and 80°S to 80°N at a spatial resolution of 0.1˚ x 0.1˚. It is derived from Level 2, the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue aerosol products Collection 6.1 from Terra (MOD04_L2). The dataset is the standard deviation of climatological monthly mean for each month over 2000 to 2022.The FDS is calculated as the number of days per month when the daily dust optical depth is greater than a threshold optical depth (e.g., 0.025) with two quality flags: the lowest (1) and highest (3). It is advised to use flag 1, which is of lower quality, over dust source regions, and flag 3 over remote areas or polluted regions. Eight thresholds (0.025, 0.05, 0.1, 0.25, 0.5, 0.75, 1, 2) are saved separately in eight files.If you have any questions, please read the README document first and post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 4 OSPO Global Nighttime Foundation Sea Surface Temperature Analysis (GDS version 2)

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis at the Office of Satellite and Product Operations (OSPO) using optimal interpolation (OI) on a global 0.054 degree grid. The Geo-Polar Blended Sea Surface Temperature (SST) Analysis combines multi-satellite retrievals of sea surface temperature into a single analysis of SST. This analysis includes only nighttime data from sensors that include the Advanced Very High Resolution Radiometer (AVHRR), the Visible Infrared Imager Radiometer Suite (VIIRS), the Geostationary Operational Environmental Satellite (GOES) imager, the Japanese Advanced Meteorological Imager (JAMI) and in situ data from ships, drifting and moored buoys. This analysis was specifically produced to be used as a lower boundary condition in Numerical Weather Prediction (NWP) models. This dataset adheres to the GHRSST Data Processing Specification (GDS) version 2 format specifications.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 4 OSTIA Global Foundation Sea Surface Temperature Analysis (GDS version 2)

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis at the UK Met Office using optimal interpolation (OI) on a global 0.05x0.05 degree grid. The Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) analysis uses satellite data from over 10 unique sensors that include the Advanced Very High Resolution Radiometer (AVHRR), the Spinning Enhanced Visible and Infrared Imager (SEVIRI), the Geostationary Operational Environmental Satellite (GOES) imager, the Infrared Atmospheric Sounding Interferometer (IASI), the Tropical Rainfall Measuring Mission Microwave Imager (TMI) and in situ data from ships, drifting and moored buoys. This analysis was specifically produced to be used as a lower boundary condition in Numerical Weather Prediction (NWP) models. This dataset adheres to the GHRSST Data Processing Specification (GDS) version 2 format specifications and is updated daily with 24-hours nominal latency in a Near Real Time (NRT) mode. UKMO also produces the higher quality reprocessed OSTIA L4 SST using more sensors and data with a biannual latency (https://podaac.jpl.nasa.gov/dataset/OSTIA-UKMO-L4-GLOB-REP-v2.0).

restrictednotspecifiedApr 2025View details →
nasa28/100

SWOT Level 2 River Single-Pass Vector Data Product, Version C

The SWOT Level 2 River Single-Pass Vector Data Product from the Surface Water Ocean Topography (SWOT) mission provides water surface elevation, slope, width, and discharge derived from the high rate (HR) data stream from the Ka-band Radar Interferometer (KaRIn). SWOT launched on December 16, 2022 from Vandenberg Air Force Base in California into a 1-day repeat orbit for the "calibration" or "fast-sampling" phase of the mission, which completed in early July 2023. After the calibration phase, SWOT entered a 21-day repeat orbit in August 2023 to start the "science" phase of the mission, which is expected to continue through 2025. <br>Water surface elevation, slope, width, and discharge are provided for river reaches (approximately 10 km long) and nodes (approximately 200 m spacing) identified in the prior river database, and distributed as feature datasets covering the full swath for each continent-pass. These data are generally produced for inland and coastal hydrology surfaces, as controlled by the reloadable KaRIn HR mask. The dataset is distributed in ESRI Shapefile format.<br>Please note that this collection contains SWOT Version C science data products. <br>This dataset is the parent collection to the following sub-collections: <br>https://podaac.jpl.nasa.gov/dataset/SWOT_L2_HR_RiverSP_node_2.0 <br>https://podaac.jpl.nasa.gov/dataset/SWOT_L2_HR_RiverSP_reach_2.0 <br>

restrictednotspecifiedApr 2025View details →
nasa28/100

SatCORPS CERES GEO Edition 4 Meteosat-5 Full Disk Version 2

CER_GEO_Ed4_MET05_FD_V02 is the Satellite Cloud and Radiation Property retrieval System (SatCORPS) Clouds and the Earth's Radiant Energy System (CERES) Geostationary Satellite (GEO) Edition 4 Meteosat-5 over the Full Disk (FD) Version 2 data product. Data was collected using the Meteosat Visible Infra-Red Imager instrument on the Meteosat-5 platform.This data set comprises cloud micro-physical and radiation properties derived hourly from Meteosat-5 geostationary satellite imager data using the Langley Research Center (LaRC) SATCORPS algorithms supporting the CERES project. Each active geostationary satellite's cloud micro-physical and radiation properties are merged to create hourly global cloud properties that estimate fluxes between CERES instrument measurements to account for the changing diurnal cycle. The data set is arranged as files for each hour and in netCDF-4 format. The observations are at 4 km resolution (at nadir) and are sub-sampled to 8 km.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 4 OSPO Global Foundation Sea Surface Temperature Analysis (GDS version 2)

A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis at the Office of Satellite and Product Operations (OSPO) using optimal interpolation (OI) on a global 0.054 degree grid. The Geo-Polar Blended Sea Surface Temperature (SST) Analysis combines multi-satellite retrievals of sea surface temperature into a single analysis of SST. This analysis uses both daytime and nighttime data from sensors that include the Advanced Very High Resolution Radiometer (AVHRR), the Visible Infrared Imager Radiometer Suite (VIIRS), the Geostationary Operational Environmental Satellite (GOES) imager, the Japanese Advanced Meteorological Imager (JAMI) and in situ data from ships, drifting and moored buoys. This analysis was specifically produced to be used as a lower boundary condition in Numerical Weather Prediction (NWP) models. This dataset adheres to the GHRSST Data Processing Specification (GDS) version 2 format specifications.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 3U Global Subskin Sea Surface Temperature version 8a from the Advanced Microwave Scanning Radiometer 2 on the GCOM-W satellite

GDS2 Version -The Advanced Microwave Scanning Radiometer 2 (AMSR2) was launched on 18 May 2012, onboard the Golbal Change Observation Mission - Water (GCOM-W) satellite developed by the Japan Aerospace Exploration Agency (JAXA). The GCOM-W mission aims to establish the global and long-term observation system to collect data, which is needed to understand mechanisms of climate and water cycle variations, and demonstrate its utilization. AMSR2 onboard the first generation of the GCOM-W satellite will continue Aqua/AMSR-E observations of water vapor, cloud liquid water, precipitation, SST, sea surface wind speed, sea ice concentration, snow depth, and soil moisture. AMSR2 is a remote sensing instrument for measuring weak microwave emission from the surface and the atmosphere of the Earth. From about 700 km above the Earth, AMSR2 will provide us highly accurate measurements of the intensity of microwave emission and scattering. The antenna of AMSR2 rotates once per 1.5 seconds and obtains data over a 1450 km swath. This conical scan mechanism enables AMSR2 to acquire a set of daytime and nighttime data with more than 99% coverage of the Earth every 2 days. Remote Sensing Systems (RSS, or REMSS), providers of these SST data for the Group for High Resolution Sea Surface Temperature (GHRSST) Project, performs a detailed processing of AMSR-E instrument data in two stages. The first stage produces a near-real-time (NRT) product (identified by "rt" within the file name) which is made as available as soon as possible. This is generally within 3 hours of when the data are recorded. Although suitable for many timely uses the NRT products are not intended to be archive quality. "Final" data (currently identified by "v8" within the file name) are processed when RSS receives the atmospheric mode NCEP FNL analysis. The NCEP wind directions are particularly useful for retrieving more accurate SSTs and wind speeds. The final "v8" products will continue to accumulate new swaths (half orbits) until the maps are full, generally within 2 days.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.