Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
977
datasets available to search
ShareScore release 0.9.0
Dataset results
977 results for “calculations”
BRAIN Journal-New Computer Assisted Diagnostic to Detect Alzheimer Disease-Figure 11. Results of calculating the Hausdorff distance
<p>The figure shows the calculation results of the four distances: Dice, PSNR, Hausdorff and MSS using the four methods (Caselles Chan & Vese, Lankton, our method), compared with the ground truth on three samples.</p> <p> Results of calculating the Hausdorff distances, Dice, PSNR, MSSD between the four methods (Caselles Chan & Vese, Lanktom, our method) .and the ground truth about a MCI subject following segmentation of the hippocampus.</p>
BRAIN Journal-New Computer Assisted Diagnostic to Detect Alzheimer Disease-Figure 10. The results of calculating the Hausdorff distances, Dice, PSNR, MSSD between the four methods
<p>The figure shows the calculation results of the four distances: Dice, PSNR, Hausdorff and MSS using the four methods (Caselles Chan & Vese, Lankton, our method), compared with the ground truth on three samples.</p> <p>The results of calculating the Hausdorff distances, Dice, PSNR, MSSD between the four methods (Caselles, Chan & Vese, Lanktom, and our method) and the ground truth about a subject Normal following the segmentation of the hippocampus</p> <p> </p>
Calculation verification and graph generation
<p>This spreadsheet is used to verify the results of the calculations for the selected best values from the programs 8075DegRise_CO2NMDPSIRR_V5.bas (DOI 10.5281/zenodo.1418561) and 8075DegRise_NoNMDP_V1.bas (DOI 10.5281/zenodo.1419629). It is also used to determine the percentage of heat added by each component, and finally to generate graphical representations of the data results.</p>
Supplementary data for "Stability and flexibility of Heterometallic Formate Perovskites with the Dimethylammonium Cation: Pressure-induced Phase transitions and Density Functional Theory Calculations"
<p>Optimized structures for DMANaCr, DMAKCr and DMAZn.</p> <p>For each structure there is a zip-file containing the force constants used for the phonon calculation, the phonon frequencies at the gamma point, the calculated thermal properties and the phonon partial density of states.</p> <p>For further information see the associated paper.</p>
Density Functional Theory Calculations of Segregation Tendency of Cu and Zn in Al3Zr Dispersoid Particles
<p>The .zip archive contains data related to DFT calculations published in the paper:</p> <p>Dispersoid Composition in Zirconium Containing Al-Zn-Mg-Cu (AA7010) Aluminium Alloy<br> A.M. Cassell, J. D. Robson, C. P. Race, A. Eggeman, T. Hashimoto, M. Besel.</p> <p>Submitted to Acta Materialia.</p> <p>Archive contains a set of .txt files, each of which contains the total energies of a series of simulations along with several other output fields and descriptive fields.</p> <p>The Archive also contains a .ipynb Jupyter (Python) Notebook, which contains descriptions of the .txt files, the code required to import them and the analysis required to produce the figure in the published paper.</p>
Calculation of damage in forests using Sentinel-2
<p>Data from Senitnel-2 after atmospheric correction were used to determine forest damage caused by the storm. On the territory of Poland the destruction took place on 11-12 August 2017. In order to determine the area of destruction images before and after the storm were taken. Then the supervised classification was implemented for data from both dates. The area of damage was calculated on the basis of the classification result, the area of forests classified on the image before the storm and afterwards allowed to determine the area of losses.</p> <p>Links to the presentation:</p> <p>http://fabspace.pl/wp-content/uploads/2017/11/1_Wprowadzenie_a.pdf</p> <p>http://fabspace.pl/wp-content/uploads/2017/11/1_Wprowadzenie_b.pdf</p> <p>http://fabspace.pl/wp-content/uploads/2017/11/2_Klasyfikacja.pdf</p> <p>http://fabspace.pl/wp-content/uploads/2017/11/3_Platforma.pdf</p>
The dataset of covalent bond lengths resulting from the first-principle calculations
<p>Optimized geometries (<strong>geoms_b973c_optimized.tar.gz</strong>, <strong>geoms_pbeh3c_optimized.tar.gz</strong> ),</p> <p>sample MP2 single point input files (<strong>mp2singlePointOnB3lypInputs.tar.gz</strong>) based on initial geometries (B3LYP-optimized as in PubChemQC),</p> <p>JANPA output files (<strong>janpa_b973cGeoms.tar.gz</strong>, <strong>janpa_b3lypGeoms.tar.gz</strong>, <strong>janpa_pbeh3cGeoms.tar.gz</strong> ),</p> <p>and files for the covalent bond lengths dataset:</p> <p><strong>selected_mols.txt</strong> - identifiers of molecules with method-independent connectivity, unique InChI and selected as being non-aromatic;</p> <p>numbers of lone pairs (LP) CLPOs for atoms ( <strong>LPs_b3lyp</strong>, <strong>LPs_B97-3c</strong>, <strong>LPs_PBEh-3c</strong> );</p> <p>numbers of bonding (BD) CLPOs for atoms (<strong> BDs_b3lyp</strong>, <strong>BDs_B97-3c</strong>, <strong>BDs_PBEh-3c </strong>);</p> <p><strong>locBonds_b3lyp.txt</strong> , <strong>locBonds_b97-3c.txt</strong> , <strong>locBonds_pbeh-3c.txt</strong> - the datasets of the bonds not affected by electron delocalization. Each line in each file has the following format:</p> <p><em>Element Element BondMultiplicity MoleculeId AtomId1 AtomId2</em></p> <p> </p>
Calculation of RF sheath properties from surface wave-fields: a post-processing method
<p>The accompanying files contain digital data for figures in the article "Calculation of RF sheath properties from surface wave-fields: a post-processing method" by J.R. Myra and H. Kohno, submitted to the journal Plasma Physics and Controlled Fusion.</p> <p><br> Abstract:</p> <p>In ion cyclotron range of frequency (ICRF) experiments in fusion research devices, radio frequency (RF) sheaths form where plasma, strong RF wave fields and material surfaces coexist. These RF sheaths affect plasma material interactions such as sputtering and localized power deposition, as well as the global RF wave fields themselves. RF sheaths may be modeled by employing a sheath boundary condition (BC) in place of the more customary conducting wall BC; however, there are still many ICRF computer codes that do not implement the sheath BC. In this paper we present a method for post-processing results obtained with the conducting wall BC. The post-processing method produces results that are equivalent to those that would have been obtained with the RF sheath BC, under certain assumptions. The post-processing method is also useful for verification of sheath BC implementations and as a guide to interpretation and understanding of the role of RF sheaths and their interactions with the waves that drive them.</p> <p> </p>
Dataset for the article "Cost-effective Potential for Accurate Polarizable Embedding Calculations in Protein Environments"
<p>This dataset contains additional material related to the article: "Cost-effective Potential for Accurate Polarizable Embedding Calculations in Protein Environments". Final version of the article is available at <a href="https://doi.org/10.1021/acs.jctc.9b00616">https://doi.org/10.1021/acs.jctc.9b00616</a> (paywall). A preprint is freely available at <a href="https://doi.org/10.26434/chemrxiv.8126912">https://doi.org/10.26434/chemrxiv.8126912</a>. See <em>readme.md</em> for further description.</p>
Figure. The phylogenetic tree showing the relationship among Brevibacillus parabrevis strains SA2.2 and TJ2.3, Bacillus licheniformis MG4.2, and their phylogenetically closest type strains. The GenBank accession numbers of the type strains and studied strains are shown following species names. Distance matrix was calculated by Kimura's 2-parameter model. The scale bar indicates 0.02 substitutions per nucleotide position. Alicyclobacillus pohliae AJ564766 served as an out-group. in Distribution of extracellular enzyme-producing bacteria in the digestive tracts of 4 brackish water fish species
Figure. The phylogenetic tree showing the relationship among Brevibacillus parabrevis strains SA2.2 and TJ2.3, Bacillus licheniformis MG4.2, and their phylogenetically closest type strains. The GenBank accession numbers of the type strains and studied strains are shown following species names. Distance matrix was calculated by Kimura's 2-parameter model. The scale bar indicates 0.02 substitutions per nucleotide position. Alicyclobacillus pohliae AJ564766 served as an out-group.
Figure. Observed (S obs) and estimated species richness for Chao 2, Jackknife 2, and Bootstrap, calculated for Lumbricidae in East Serbia. Vertical dashed lines represent 50%, 75%, and 100% of the sampling effort, respectively. in A nonparametric approach in quantifying species richness of Lumbricidae in East Serbia, Balkan Peninsula
Figure. Observed (S obs) and estimated species richness for Chao 2, Jackknife 2, and Bootstrap, calculated for Lumbricidae in East Serbia. Vertical dashed lines represent 50%, 75%, and 100% of the sampling effort, respectively.
Figure. Food preferences of Chinese mole shrew (Anourosorex squamipes) from an urban area. a, b, c, d. Mean relative consumption along six trials for each food set are shown in a, b, c, d, respectively. (see materials and methods for details on the calculation of relative consumption). in Natural animal food preference of Chinese mole shrew (Anourosorex squamipes) from an urban area: a laboratory study
Figure. Food preferences of Chinese mole shrew (Anourosorex squamipes) from an urban area. a, b, c, d. Mean relative consumption along six trials for each food set are shown in a, b, c, d, respectively. (see materials and methods for details on the calculation of relative consumption).
Composition and thermophysical properties of metallurgical plasmas - LTE calculations
<div> <p>This dataset contains two subsets:</p> <p>First - elemental compositions of the equilibrium gas phase over a variety of metallurgical processes conducted in direct-current plasma arc furnaces at a range of slag temperatures between the typical process temperature and the vaporisation temperature (defined as the lowest temperature at which only a gas phase exists). These were obtained from process simulations using thermochemical calculation software.</p> <p>Second - plasma composition and thermophysical properties at a range of plasma temperatures between 2000 K and 30000K under local thermodynamic equilibrium conditions, as calculated using minplascalc software (https://github.com/quinnreynolds/minplascalc, commit 967faf3). All calculations are at atmospheric pressure, and use the elemental gas phase compositions for each slag temperature to define the mass conservation constraints.</p> </div> <h2></h2>
Computational data (frequencies calculations) of the nitroxides
<p>Data associated with <a href="https://doi.org/10.1016/j.molliq.2024.126207">https://doi.org/10.1016/j.molliq.2024.126207</a>.</p> <p>This dataset contains the Gaussian checkpoint files (this is a formatted text format, described at <a href="https://gaussian.com/interfacing/">https://gaussian.com/interfacing/</a>) corresponding to the frequency calculations performed on each structure (in both solvents and for each complexation state). Check out README.md for detailed data organisation.</p>
Formulas for calculating food self-sufficiency ratios in previous studies and author comments
<p><span>The<strong> food self-sufficiency ratio of each country</strong> is obtained by dividing the amount of food production by the amount of food supply, but this is not the only way to calculate the food self-sufficiency ratio. Before starting the calculation, issues such as the food to be calculated, the unit of measurement of food and its data source, and the calculation method for primary and secondary products must be resolved. We summarized how major previous studies have addressed this issue.<strong> The author of this document selected 20 studies that contain specific descriptions from previous studies on this issue</strong>. The author then added comments to all previous studies. The main comment was that although <strong>the formula for calculating the food self-sufficiency ratio of each country is incomplete</strong>, there is a large amount of valid previous research that contains many suggestions.</span></p>
Supporting Information for Accelerating Combustion Mechanism Discovery with Automated Uncertainty, Sensitivity, Thermodynamics, and Kinetics Calculations
<p>Supplementary material to accompany the manuscript "Accelerating Combustion Mechanism Discovery with Automated Uncertainty, Sensitivity, Thermodynamics, and Kinetics Calculations" by Sevy Harris and Richard H West.</p> <ul> <li>The software (mostly Python scripts) is in autoscience_workflow.zip. </li> <li>DFT results (Gaussian log files, Arkane input files, Arkane output files) for all species and reactions are in dft.zip</li> <li>RMG-built detailed kinetic models are in mechanisms.zip </li> <li>Additional plots and results (as described in the manuscript) are in supporting_information.pdf</li> </ul>
Raw plot data for: Accelerating equilibrium isotope effect calculations. II. Stochastic implementation of direct estimators
<p>Data for publication: K. Karandashev, J. Vanicek, Accelerating equilibrium isotope effect calculations. II. Stochastic implementation of direct estimators, J. Chem. Phys. <strong>151</strong>, 134116 (2019) <a href="https://doi.org/10.1063/1.5124995">https://doi.org/10.1063/1.5124995</a></p> <p>This data set contains the raw numerical data for reproducing Figures 1-8 in the publication.</p>
Amorphous Niobium Oxide Structures Calculated from First Principles using Density Functional Theory and Molecular Dynamics
<p>The dataset contains fifteen different amorphous niobium oxide structures. Nine of the structures have the same stoichiometry as Nb2O5. The other six are defect structures containing 1 or 2 oxygen vacancies, or 1 or 2 interstitial oxygens, or 1 Nb vacancy. Each of the structure files is in the VASP POSCAR file format. Each structure was created using ab-initio molecular dynamics at 5000~K to liquidate the structure, then snapshots of the structure were taken every 2 ps, and geometry optimizations were performed on each individual snapshot. The naming convention is relatively simple: 'conf_x_POSCAR' is a stoichiometric POSCAR, and 'conf_x_oadd1_POSCAR' is a defect structure originating from structure 'x' with a single oxygen interstitial. The defect labels correspond to 1 oxygen interstitial (oadd1), 2 oxygen interstitials (oadd2), 1 oxygen vacancy (ovac1), 2 separated oxygen vacancies (ovac2), 2 nearest neighbor oxygen vacancies (ovac2nn), and 1 Nb vacancy (nbvac).</p>
Data accompanying arXiv:2112.07341, "Euclid: Covariance of weak lensing pseudo-Cl estimates. Calculation, comparison to simulations, and dependence on survey geometry"
<p>Data accompanying <a href="https://arxiv.org/abs/2112.07341">arXiv:2112.07341, "<em>Euclid</em>: Covariance of weak lensing pseudo-Cl estimates. Calculation, comparison to simulations, and dependence on survey geometry"</a>.</p> <p>Code available at <a href="https://github.com/robinupham/shear_pcl_cov">https://github.com/robinupham/shear_pcl_cov</a>.</p>
TOA and surface cloud radiative kernels calculated with RRTM
<p> These cloud radiative kernels (CRK) are calculated with RRTM, with meteorological variables from ERA-interim as inputs. The file format is netcdf4, and was created by python. To read these files, any software supporting netcdf4 can be used. </p> <p> Longwave cloud radiative effect at surface is primarily decided by cloud base properties, while top-of-atmosphere (TOA) cloud radiative effect is primarily decided by cloud top properties, so the standard version of surface CRK is a function of latitude, longitude, month, cloud optical thickness (τ) and cloud base pressure (CBP), and the TOA CRK is a function of latitude, longitude, month,τ and cloud top pressure (CTP). Considering that the cloud property histograms provided by climate models are functions of CTP instead of CBP at present, we created a set of surface CRK on CTP-τ cloud fraction histograms using the statistical relationship between CTP, CBP and τ from collocated CloudSat-MODIS observations.</p> <p> There are five individual files. "SFC_CRK_CBP2.nc" is for surface CRK on CBP-τ histograms, "SFC_CRK_CTP2.nc" is for surface CRK on CTP-τ histograms, and "TOA_CRK_CTP2.nc" is for TOA CRK on CTP-τ histograms. The atmospheric CRK can be calculated as the difference between "TOA_CRK_CTP2.nc" and "SFC_CRK_CTP2.nc". The other two files denote separate CRK for ice and liquid clouds. </p> <p> </p> <p> Notes: (1) this version is used in the submitted draft for publication, and it might be renewed in the future.</p> <p> (2) To avoid NAN values, the value of CBP/CTP is set to be the lowest level near surface for cloud bins with CBP/CTP greater than surface air temperature (cloud base or top is below surface). </p> <p> </p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.