Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
858
datasets available to search
ShareScore release 0.9.0
Dataset results
858 results for “monitoring data”
Data from: Estimating a physiologically-based threshold to oxygen and temperature from marine monitoring data reveals challenges and opportunities for forecasting distribution shifts
Open the record for dataset details and reuse information.
Data from: Toward spatio-temporal models to support national-scale forest carbon monitoring and reporting
Open the record for dataset details and reuse information.
Data from: Time series of bird abundances, land cover and temperature from standardized breeding bird monitoring schemes (line transects and point count routes) from Norway, Sweden and Finland, for 1975-2016
Open the record for dataset details and reuse information.
Data for: Large-scale long-term passive-acoustic monitoring reveals spatiotemporal activity patterns of boreal bats
Open the record for dataset details and reuse information.
Integrating presence-only and detection/non-detection data to estimate distributions and expected abundance of difficult-to-monitor species on a landscape-scale
Open the record for dataset details and reuse information.
Data from: Maximizing the detection probabilities of dusky grouse for population monitoring
Open the record for dataset details and reuse information.
Data from: evaluating the use of lake sedimentary DNA in palaeolimnology: a comparison with long-term microscopy-based monitoring of the phytoplankton community
Open the record for dataset details and reuse information.
Data for: Zebra finch song ecology: monitoring of breeding, observational transects, focal and year-round acoustic recordings, and a large-scale simultaneous playback experiment
Open the record for dataset details and reuse information.
Data from: Using environmental DNA metabarcoding to monitor fish communities in small rivers and large brooks: Insights on the spatial scale of information
Open the record for dataset details and reuse information.
Data from: The performance of drones and artificial intelligence for monitoring sage-grouse at leks
Open the record for dataset details and reuse information.
Data from: DNA metabarcoding for biodiversity monitoring in a national park: screening for invasive and pest species
Open the record for dataset details and reuse information.
Open Lowland Environmental Monitoring Station, Black Rock Forest, NY, raw hourly data
Black Rock Forest maintains the Open Lowland real-time weather station at 129 Continental Rd, Cornwall, NY. The system was designed to measure air temperature (average, maximum, minimum), relative humidity (average, maximum, minimum), average vapor pressure, dew point temperature, photosynthetically active solar radiation, net global solar radiation, mean horizontal wind speed, mean wind direction, standard deviation of wind direction, maximum wind speed, precipitation amount, barometric pressure (average, maximum, minimum), and average soil temperature at two depths. Other sensors are used to measure snow depth, CO2 concentration, and albedo. Data are collected from the Open Lowland Station using a CR1000. Most instruments have a sample interval of 1 minute. The program records averages, minimum or maximum of those 1-minute readings every hour. Rainfall is totals for the 1 hour period.
Big Spirit Lake Monitoring Buoy: High Frequency Oxygen, Temperature, Water Quality and Weather Data 2020-2021
High frequency weather and limnological data from the Big Spirit Lake monitoring buoy, Iowa, USA, from 2020 - 2021. The Big Spirit Lake (Global Lake Ecological Observatory Network—GLEON) instrumented monitoring buoy is operated by the Iowa Lakeside Laboratory (https://iowalakesidelab.org/). The buoy is equipped with a thermistor chain and dissolved oxygen probes the measure every meter from 1m to 6m in depth, a multi-parameter sonde at 1 meter depth, as well as a weather station and wave sensor (added in 2021) situated on the buoy. All data in this data package have been QAQC'd to remove obviously errant readings, highly suspicious readings, and artifacts of buoy maintenance. Because of this, as well as sensor errors and failure, not all data is available at every point each year. Measured parameters in the data set include water temperature, dissolved oxygen concentration, and dissolved oxygen saturation (measured every meter from 1m to 6m). Other measured parameters include pH, specific conductivity, chlorophyll, and blue-green algae in the surface water, as well as weather station data and wave sensor data. Sampling Frequency: Parameters are measured at 10 minute intervals, and most years include measurements from mid/late May through October.
West Okoboji Lake Monitoring Buoy: High Frequency Oxygen, Temperature, Water Quality and Weather Data 2015-2021
High frequency weather and limnological data from the West Okoboji Lake monitoring buoy, Iowa, USA, from 2015 - 2021. The West Okoboji Lake (Global Lake Ecological Observatory Network—GLEON) instrumented monitoring buoy is operated by the Iowa Lakeside Laboratory (https://iowalakesidelab.org/). The buoy is equipped with a thermistor chain and dissolved oxygen probes the measure every 2 meters from 1m to 25m in depth, a multi-parameter sonde at 1 meter depth, as well as a weather station situated on the buoy. All data in this data package have been QAQC'd to remove obviously errant readings, highly suspicious readings, and artifacts of buoy maintenance. Because of this, as well as sensor errors and failure, not all data is available at every point each year. Measured parameters in the data set include water temperature, dissolved oxygen concentration, and dissolved oxygen saturation (measured every 2 meters from 1m to 25m). Other measured parameters include pH and specific conductive in the surface water, as well as weather station data including wind, rain, air temperature and humidity. Sampling Frequency: Parameters are measured at 10 minute intervals, and most years include measurements from mid/late May through October. Measurements were stopped in the fall once the lake had turned over.
Small mammals surveys, 1981 - 1996, Adirondack Long-Term Ecological Monitoring Program Project No. 10 by Adirondack Ecological Center of the State University of New York College of Environmental Science and Forestry, Newcomb, New York. Environmental Data Initiative
Small mammals are important in forested ecosystems: they are key predators on seeds and invertebrates, provide food for larger predators and act as disease vectors. The objective of this study was to document small mammal abundance and population changes in managed and unmanaged forests of Huntington Wildlife Forest (HWF). Seven sites were sampled from 1981-1996. Fifty traps per site (250 total) were deployed for 4 nights and checked in the mornings. All captured small mammals were identified, sexed, weighed, and measured for reproductive condition, tagged, and brought into the lab for processing. Females with embryos or placental scars were noted in the lab. Over a five-year period, 671 deer mice; 261 woodland jumping mice, 594 southern redbacked voles, 248 short-tailed shrews, 373 masked shrews, 75 smoky shrews and small numbers of other species were captured and sexed/aged. According to Prachar and Sage (1988), weights of deer mice, redbacked voles, woodland jumping mice, short-tailed shrews, masked shrews and smoky shrews differed among years and age classes for 1983-1987. Weights differed between sexes for mice and voles but not shrews. Placental scar/embryo counts of mice and voles did not differ among years, habitats, mammal age classes or sexes. Reproductive rates of shrews exhibited patterns of fluctuation from 1983-1987.
Songbird surveys , 1952 - 1964, 1983 - 2008 Adirondack Long-Term Ecological Monitoring Program Project No. 2 Breeding Birds by Adirondack Ecological Center of the State University of New York College of Environmental Science and Forestry, Newcomb, New York. Environmental Data Initiative.
Study objectives were to (1) Document long-term trends in relative abundance and diversity of breeding forest birds (songbirds) in forest stands with different harvest histories and (2) Identify bird species that can be used as indicators of habitat change or degradation. Declines in neotropical migrants have been linked to changes in habitat quantity and quality across species' range. Songbirds that nest and forage in different habitat types or at different heights in the forest canopy may not be affected equally by forest change or management. We detected breeding songbirds using point-counts at Huntington Wildlife Forest (HWF) in the central Adirondack Mountains of New York during 1983-2000 and modeled on an original songbird point count dataset from Webb et al. (1977). Relative abundance (RA, the number of individual birds/count) was measured in sites with differing management histories, from an unmanaged >300-year-old stand to a stand cut with the shelterwood/overstory removal method just prior to sampling in 1983). Over eighty bird species were detected during the study duration. Songbird ecology and habitat characteristics can be used to understand long-term changes in relative abundance as related to forest change.
Data for journal article: "Automated precipitation monitoring with the Thies disdrometer: Biases and ways for improvement"
<p>This dataset contains data used for the journal article" Automated precipitation monitoring with the Thies disdrometer: Biases and ways for improvement" submitted to Atmospheric Measurement Techniques.</p>
Application of spectral library prediction for parallel reaction monitoring of viral peptides_DDA_data
<p><strong>Project description: </strong></p> <p>A major part of the analysis of parallel reaction monitoring (PRM) data is the comparison of observed fragment ion intensities to a library spectrum. Classically, these libraries are generated by data-dependent acquisition (DDA). Here we test Prosit, a published deep neural network algorithm, for its applicability in predicting spectral libraries for PRM. For this purpose, we targeted 1,529 precursors derived from synthetic viral peptides and analyzed the data with Prosit and DDA-derived libraries. Additionally, we used a spectral library predicted by Prosit and a DDA library to identify SARS-CoV-2 peptides from a simulated oropharyngeal swab.</p> <p> </p> <p><strong>Sample processing protocol:</strong></p> <p>A total of 1,569 crude synthetic viral peptides were ordered in six pools from JPT (Berlin, Germany). Synthetic peptides were separated on a 200 cm μPAC™ column (PharmaFluidics) by using an EASY-nLC1200 system (Thermo Fisher Scientific) equipped with a μPAC™ trapping column (PharmaFluidics). The flow rate was set to 300 nL/min and a stepped linear 160 min gradient was applied: 3-10% B in 22 min, 10-33%B in 95 min, 33-49% B in 23 min, 49-80% B in 10 min and 80% B for 10 min. Solvent A was 0.1% (v/v) formic acid (FA) in water, solvent B consisted of 80% (v/v) acetonitrile in 0.1% (v/v) FA. The column temperature was set to 50 °C. The Q Exactive Plus (Thermo Fisher Scientific) operated in Full MS/dd-MS2 or unscheduled PRM mode. For MS/dd-MS2 the following parameters were used. MS1 resolution was 70.000 with an AGC target of 3x10<sup>6</sup>, max. injection time of 20 ms and a scan range of 300-1650 m/z. MS2 resolution was 17.500 with an AGC target of 10<sup>5</sup>, max. injection time of 50 ms and an isolation window of 2 m/z. The analysis parameters in PRM mode were set as follows. MS1 parameters were identical to DDA. MS2 resolution was 17.500 with an AGC target of 10<sup>6</sup>, max. injection time of 55 ms and an isolation window of 1.4 m/z.</p> <p>Potential SARS-CoV-2 target peptides belonging to the N protein were identified by DDA of SARS-CoV-2 infected Calu-3 cells. Peptides were diluted in 0.1% TFA (0.2 µg/µL) and 5 µL were separated on a 50 cm μPAC™ column (PharmaFluidics) using an EASY-nLC1200 system (Thermo Fisher Scientific). The flow rate was set to 800 nL/min and a stepped 30 min gradient was applied: 6-11% B in 2:58 min, 11-30% B in 17:10 min, 30-35% B in 2:41 min, 35-47% B in 3:11 min, 47-80% B for 0:10 min, 80% B for 1:50 min, 80-0% B in 0:10 min and 100% A for 1:50 min. Solvent A was 0.1% (v/v) formic acid (FA) in water, solvent B consisted of 80% (v/v) acetonitrile in 0.1% (v/v) FA. The column temperature was set to 50 °C. The Q Exactive HF (Thermo Fisher Scientific) operated in Full MS/dd-MS2 (Top20) using the following parameters. MS1 resolution was 60.000 with an AGC target of 3x10<sup>6</sup>, max. injection time of 20 ms and a scan range of 300-1650 m/z. MS2 resolution was 17.500 with an AGC target of 10<sup>5</sup>, max. injection time of 50 ms and an isolation window of 2 m/z.</p> <p> </p> <p>To simulate a SARS-CoV-2 positive patient sample, we spiked cell-culture derived virus in a negative oropharyngeal swab and targeted the N protein by PRM. LC parameters were identical to DDA analysis of SARS-CoV-2 infected Calu-3 cells. The PRM parameters of the The Q Exactive HF (Thermo Fisher Scientific) were set as follows. MS1 parameters were identical to DDA. MS2 resolution was 45.000 with an AGC target of 10<sup>6</sup>, max. injection time of 100 ms and an isolation window of 1.4 m/z.</p> <p> </p> <p> </p> <p><strong>Data processing protocol:</strong></p> <p>DDA Raw files were searched with MaxQuant against the respective virus database (UniProt) with a peptide FDR of 1%. Detailed MaxQuant parameters can be found in the parameters.txt files of the according results. MaxQuant .msms output files were used to generate spectral libraries with BiblioSpec implemented in the Skyline environment using a cut-off score of 0.95. Peptide identification of PRM runs was done in Skyline using the top 6 fragment ions of the DDA spectral library or according Prosit derived library (Prosit_2020_intensity_model).</p>
Application of spectral library prediction for parallel reaction monitoring of viral peptides_PRM_NCE_data
<p><strong>Project description: </strong></p> <p>A major part of the analysis of parallel reaction monitoring (PRM) data is the comparison of observed fragment ion intensities to a library spectrum. Classically, these libraries are generated by data-dependent acquisition (DDA). Here we test Prosit, a published deep neural network algorithm, for its applicability in predicting spectral libraries for PRM. For this purpose, we targeted 1,529 precursors derived from synthetic viral peptides and analyzed the data with Prosit and DDA-derived libraries. Additionally, we used a spectral library predicted by Prosit and a DDA library to identify SARS-CoV-2 peptides from a simulated oropharyngeal swab.</p> <p> </p> <p><strong>Sample processing protocol:</strong></p> <p>A total of 1,569 crude synthetic viral peptides were ordered in six pools from JPT (Berlin, Germany). Synthetic peptides were separated on a 200 cm μPAC™ column (PharmaFluidics) by using an EASY-nLC1200 system (Thermo Fisher Scientific) equipped with a μPAC™ trapping column (PharmaFluidics). The flow rate was set to 300 nL/min and a stepped linear 160 min gradient was applied: 3-10% B in 22 min, 10-33%B in 95 min, 33-49% B in 23 min, 49-80% B in 10 min and 80% B for 10 min. Solvent A was 0.1% (v/v) formic acid (FA) in water, solvent B consisted of 80% (v/v) acetonitrile in 0.1% (v/v) FA. The column temperature was set to 50 °C. The Q Exactive Plus (Thermo Fisher Scientific) operated in Full MS/dd-MS2 or unscheduled PRM mode. For MS/dd-MS2 the following parameters were used. MS1 resolution was 70.000 with an AGC target of 3x10<sup>6</sup>, max. injection time of 20 ms and a scan range of 300-1650 m/z. MS2 resolution was 17.500 with an AGC target of 10<sup>5</sup>, max. injection time of 50 ms and an isolation window of 2 m/z. The analysis parameters in PRM mode were set as follows. MS1 parameters were identical to DDA. MS2 resolution was 17.500 with an AGC target of 10<sup>6</sup>, max. injection time of 55 ms and an isolation window of 1.4 m/z.</p> <p>Potential SARS-CoV-2 target peptides belonging to the N protein were identified by DDA of SARS-CoV-2 infected Calu-3 cells. Peptides were diluted in 0.1% TFA (0.2 µg/µL) and 5 µL were separated on a 50 cm μPAC™ column (PharmaFluidics) using an EASY-nLC1200 system (Thermo Fisher Scientific). The flow rate was set to 800 nL/min and a stepped 30 min gradient was applied: 6-11% B in 2:58 min, 11-30% B in 17:10 min, 30-35% B in 2:41 min, 35-47% B in 3:11 min, 47-80% B for 0:10 min, 80% B for 1:50 min, 80-0% B in 0:10 min and 100% A for 1:50 min. Solvent A was 0.1% (v/v) formic acid (FA) in water, solvent B consisted of 80% (v/v) acetonitrile in 0.1% (v/v) FA. The column temperature was set to 50 °C. The Q Exactive HF (Thermo Fisher Scientific) operated in Full MS/dd-MS2 (Top20) using the following parameters. MS1 resolution was 60.000 with an AGC target of 3x10<sup>6</sup>, max. injection time of 20 ms and a scan range of 300-1650 m/z. MS2 resolution was 17.500 with an AGC target of 10<sup>5</sup>, max. injection time of 50 ms and an isolation window of 2 m/z.</p> <p> </p> <p>To simulate a SARS-CoV-2 positive patient sample, we spiked cell-culture derived virus in a negative oropharyngeal swab and targeted the N protein by PRM. LC parameters were identical to DDA analysis of SARS-CoV-2 infected Calu-3 cells. The PRM parameters of the The Q Exactive HF (Thermo Fisher Scientific) were set as follows. MS1 parameters were identical to DDA. MS2 resolution was 45.000 with an AGC target of 10<sup>6</sup>, max. injection time of 100 ms and an isolation window of 1.4 m/z.</p> <p> </p> <p> </p> <p><strong>Data processing protocol:</strong></p> <p>DDA Raw files were searched with MaxQuant against the respective virus database (UniProt) with a peptide FDR of 1%. Detailed MaxQuant parameters can be found in the parameters.txt files of the according results. MaxQuant .msms output files were used to generate spectral libraries with BiblioSpec implemented in the Skyline environment using a cut-off score of 0.95. Peptide identification of PRM runs was done in Skyline using the top 6 fragment ions of the DDA spectral library or according Prosit derived library (Prosit_2020_intensity_model).</p>
Pilot implementation, monitoring, co-evaluation and validation data_v1
<p>These data have been collected in the context of monitoring and assessing the pilot operation of the INVITE project (H2020 GA 763651) and its OI2lab platform during their 1st deployment round.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.