Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2,649
datasets available to search
ShareScore release 0.9.0
Dataset results
2,649 results for “optical”
Global Annual PM2.5 Grids from MODIS, MISR, SeaWiFS and VIIRS Aerosol Optical Depth (AOD), 1998-2022, V5.GL.04
The Global Annual PM2.5 Grids from MODIS, MISR, SeaWiFS and VIIRS Aerosol Optical Depth (AOD), 1998-2022, V5.GL.04 consists of annual concentrations (micrograms per cubic meter) of all composition (i.e. total) ground-level fine particulate matter (PM2.5). This data set combines AOD retrievals from multiple satellite algorithms including the NASA MODerate resolution Imaging Spectroradiometer Collection 6.1 (MODIS C6.1), Multi-angle Imaging SpectroRadiometer Version 23 (MISRv23), MODIS Multi-Angle Implementation of Atmospheric Correction Collection 6 (MAIAC C6), the Sea-Viewing Wide Field-of-View Sensor (SeaWiFS) Deep Blue Version 4, along with the Suomi National Polar-orbiting Partnership (Suomi NPP) Visible Infrared Imaging Radiometer Suite (VIIRS). The GEOS-Chem chemical transport model is used to initially relate this total column measure of aerosol to near-surface PM2.5 concentration. Geographically Weighted Regression (GWR) is used with global ground-based measurements from the World Health Organization (WHO) database and available regional networks to predict and adjust for the residual PM2.5 bias per grid cell in the initial satellite-derived values. These estimates are primarily intended to aid in large-scale studies. Gridded data sets are provided at a resolution of 0.01 degrees to allow users to agglomerate data as best meets their particular needs. Data sets are gridded at the finest resolution of the information sources that were incorporated, but do not fully resolve PM2.5 gradients at the gridded resolution due to influence by information sources at coarser resolution. The data are distributed as GeoTIFF and netCDF files and are in WGS84 projection.
Mid-Atlantic coastal and Chesapeake Bay outflow optical measurements
Measurements made along the Mid-Atlantic coastal and Chesapeake Bay outflow regions in 2005 and 2006.
MODIS/Terra+Aqua L3 Value-added Aerosol Optical Depth - NRT
MODIS was launched aboard the Terra satellite on December 18, 1999 (10:30 am equator crossing time) as part of NASA's Earth Observing System (EOS) mission. MODIS with its 2330 km viewing swath width provides almost daily global coverage. It acquires data in 36 high spectral resolution bands between 0.415 to 14.235 micron with spatial resolutions of 250m(2 bands), 500m(5 bands),and 1000m (29 bands). MODIS sensor counts, calibrated radiances, geolocation products and all derived geophysical atmospheric and ocean products are archived at various DAACs and has been made available to public since April 2000.The shortname for this level-3 MODIS aerosol product is MCDAODHD. The Naval Research Laboratory and the University of North Dakota developed this value-added aerosol optical depth dataset based on MODIS Level 2 aerosol products. MCDAODHD is a gridded product and is specifically designed for quantitative applications including data assimilation and model validation. It is available through LANCE-MODIS. It offers several enhancements over the MODIS Level 2 data on which it is based. These enhancements include stringent filtering to reduce outliers, eliminate cloud contamination, and exclude conditions where aerosol detection is likely to be inaccurate; reduction of systematic biases over land and ocean by empirical corrections; reduction of random variation in AOD values by spatial averaging; quantitative estimation of uncertainty for each AOD data point.The MxDAODHD granules are produced every six hours, and time-stamped 00:00, 06:00, 12:00, and 18:00 (all times UTC). Each granule includes MODIS observations from +/-3 hours from the timestamp (e.g. 12:00 product includes MODIS data from 09:00-15:00 UTC). Production is initiated as soon as the Level 2 inputs become available in the LANCE system.See the LANCE-MODIS page for more dataset information: https://earthdata.nasa.gov/earth-observation-data/near-real-time/download-nrt-data/modis-nrt
The Focusing Optics X-ray Solar Imager (FOXSI): Update & Second Launch Project
<p> Particle acceleration in solar flares and its contribution to coronal heating are among the main&nbsp; unsolved problems in heliophysics. Accelerated electrons in a plasma radiate hard X-ray (HXR)&nbsp; emission through the well-known process of bremsstrahlung. HXR observations therefore are a&nbsp; powerful diagnostic tool, providing quantitative measurements of flare-accelerated electrons. Since&nbsp; bremsstrahlung emission depends on the density of the ambient medium, solar HXR emission is&nbsp; usually brightest from below the transition region, where the density increases rapidly towards the&nbsp; photosphere. Electron beams entering the chromosphere lose energy quickly through collisions and&nbsp; produce relatively intense HXR emission at the footpoints of magnetic field lines. Electron beams&nbsp; moving in the relatively tenuous corona suffer very few collisions, losing little energy and producing&nbsp; only faint HXR emission. Present-day HXR instrumentation does not have the sensitivity to see&nbsp; faint HXR emission from electrons traveling in the corona, nor the dynamic range to see such&nbsp; faint emission in the presence of bright HXR footpoint emission in the chromosphere. Existing&nbsp; observations therefore show us only where energetic electrons are stopped, but not where they&nbsp; are accelerated, nor along what path they escape from the acceleration site. The most sensitive&nbsp; solar HXR observations so far are provided by the Reuven Ramaty High Energy Spectroscopic&nbsp; Imager (RHESSI) (Lin et al. 2002). These measurements are obtained with a non-focusing rotation&nbsp; modulation collimator (RMC) imaging technique (Hurford et al. 2002). RMCs and other types&nbsp; of non-focusing imaging, however, have intrinsically limited dynamic range and sensitivity. HXR&nbsp; focusing optics can overcome both of these limitations (Section 1.2.2).&nbsp;</p> <p> The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload funded under the&nbsp; NASA Low Cost Access to Space (LCAS) program to test HXR focusing optics combined with&nbsp; silicon strip detectors for solar observations (Krucker et al. 2009). The FOXSI program is being led&nbsp; by the Space Sciences Laboratory at UC Berkeley in collaboration with the Marshall Space Flight&nbsp; Center (MSFC) and the Japan Aerospace Exploration Agency (JAXA). FOXSI is on schedule&nbsp; and on budget for a launch in October 2010. FOXSI will offer imaging spectroscopy and&nbsp; unprecedented HXR sensitivity and dynamic range. FOXSI will be !100 times more sensitive than&nbsp; RHESSI at 10 keV, and, for the first time, detect the non-thermal counterparts of quiet sun network&nbsp; flares (Section 1.2.4).&nbsp;</p> <p> Here we propose a continuation of the FOXSI program which includes data analysis&nbsp; and a second flight with an upgraded version of FOXSI. At moderate cost, we propose to&nbsp; enhance the effective area, in particular at higher energies (by a factor of !4 at 15 keV), by adding&nbsp; 3 more shells to the existing 7-shell optics (see Figure 9). Furthermore, our Japanese collaborators&nbsp; will provide, at no cost, newly available double-sided cadmium telluride (CdTe) detectors as&nbsp; a replacement for the Si detectors to allow us to take full advantage of the effective area at higher&nbsp; energies. A second flight will therefore not only allow us to continue testing HXR focusing&nbsp; optics for solar observations and also test newly developed CdTe strip detectors&nbsp; in flight but is also expected to provide a significant increase in scientific return. In&nbsp; this two year proposal, the first year (2011) will be used to upgrade the FOXSI payload and to&nbsp; analyze data from the first flight, while the second flight is planned for the midd
Free Form Mirrors for Ultra Compact High Speed Optical Systems Project
<p>This task is to collaboratively design and fabricate the free-form WIRIS telescope primary mirror with our partner Zygo as a technology demonstration. Fabricating the primary is challenging as it has 865 um of aspheric departure and is not rotationally symmetric.</p>
MODIS/Aqua Near Real Time L3 Value-added Aerosol Optical Depth
MODIS was launched aboard the Terra satellite on December 18, 1999 (10:30 am equator crossing time) as part of NASA's Earth Observing System (EOS) mission. MODIS with its 2330 km viewing swath width provides almost daily global coverage. It acquires data in 36 high spectral resolution bands between 0.415 to 14.235 micron with spatial resolutions of 250m(2 bands), 500m(5 bands),and 1000m (29 bands). MODIS sensor counts, calibrated radiances, geolocation products and all derived geophysical atmospheric and ocean products are archived at various DAACs and has been made available to public since April 2000.The shortname for this level-3 MODIS aerosol product is MYDAODHD. The Naval Research Laboratory and the University of North Dakota developed this value-added aerosol optical depth dataset based on MODIS Level 2 aerosol products. The MYDAODHD is a gridded product and is specifically designed for quantitative applications including data assimilation and model validation. It is available through LANCE-MODIS. It offers several enhancements over the MODIS Level 2 data on which it is based. These enhancements include stringent filtering to reduce outliers, eliminate cloud contamination, and exclude conditions where aerosol detection is likely to be inaccurate; reduction of systematic biases over land and ocean by empirical corrections; reduction of random variation in AOD values by spatial averaging; quantitative estimation of uncertainty for each AOD data point.The MxDAODHD granules are produced every six hours, and time-stamped 00:00, 06:00, 12:00, and 18:00 (all times UTC). Each granule includes MODIS observations from +/-3 hours from the timestamp (e.g. 12:00 product includes MODIS data from 09:00-15:00 UTC). Production is initiated as soon as the Level 2 inputs become available in the LANCE system.See the LANCE-MODIS page for more dataset information: https://earthdata.nasa.gov/earth-observation-data/near-real-time/download-nrt-data/modis-nrt
MODIS/Terra+Aqua Land Aerosol Optical Depth Daily L2G Global 1km SIN Grid NRT
The Moderate Resolution Imaging Spectroradiometer (MODIS) Near Real Time (NRT) Combined Terra and Aqua Multi-Angle Implementation of Atmospheric Correction (MAIAC) Land Aerosol Optical Depth gridded Level 2 product (MCD19A2N) produced daily at 1 kilometer (km) pixel resolutions. The MCD19A2N product provides the atmospheric properties and view geometry used to calculate the MAIAC Land Surface Bidirectional Reflectance Factor (BRF) or surface reflectance, MCD19A1N product. The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017. A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).
Gulf of Mexico carbon and bio-optical measurements
Satellite Assessment of CO2 Distribution, Variability and Flux and Understanding of Control Mechanisms in a River Dominated Ocean Margin
MODIS/Aqua Aerosol Optical Thickness Daily L3 Global 0.05-Deg CMA NRT
The MODIS/Aqua Aerosol Optical Thickness Daily L3 Global 0.05-Deg CMA Near Real Time (NRT), short name MYD09CMA, is a daily level 3 global product. It is in linear latitude and longitude (Plate Carre) projection with a 0.05Deg spatial resolution. This product is derived from MYD09IDN, MYD09IDT and MYD09IDS for each orbit by compositing the data on the basis of minimum band 3 (459 - 479 nm band) values (after excluding pixels flagged for clouds and high solar zenith angles).
MODIS/Terra Aerosol Optical Thickness Daily L3 Global 0.05Deg CMA
The MODIS Aerosol Optical Thickness (MOD09CMA) is a daily level 3 and global product. It is in linear latitude and longitude (Plate Carre) projection with a 0.05Deg spatial resolution. This product is derived from MOD09IDN, MOD09IDT and MOD09IDS for each orbit by compositing the data on the basis of minimum band 3 (459 - 479 nm band) values (after excluding pixels flagged for clouds and high solar zenith angles).
OMI/Aura Multi-wavelength Aerosol Optical Depth and Single Scattering Albedo Daily L2 Global Gridded 0.25 degree x 0.25 degree V3 (OMAEROG) at GES DISC
This Level-2G daily global gridded product OMAEROG is based on the pixel level OMI Level-2 Aerosol product OMAERO, based on the multi-wavelength algorithm that uses up to 20 wavelength bands between 331 nm and 500 nm. OMAEROG is a special Level-2 gridded product where pixel level products are binned into 0.25 x 0.25 degree global grids. It contains the data for all scenes that have observation time between UTC times of 00:00:00 and 23:59:59.9999. All data pixels that fall in a grid box are saved without averaging. Scientists can apply a data filtering scheme of their choice and create new gridded products. The OMAEROG data product contains almost all parameters that are in OMAERO. For example, in addition to the extinction optical depth and single scattering albedo, it also contains aerosol indices, cloud fraction, cloud pressure, terrain height, geolocation, solar and satellite viewing angles, and extensive quality flags. The OMAEROG files are stored in the version 5 EOS Hierarchical Data Format (HDF-EOS5). Each file contains daily data from approximately 15 orbits. The maximum file size for the OMAEROG data product is about 78 Mbytes.
GPM Ground Validation Optical Disdrometer (ODM) LPVEx
The GPM Ground Validation Optical Disdrometer (ODM) LPVEx dataset consists of precipitation particle size distribution data collected by the Eigenbrodt Optical Disdrometer (ODM) deployed onboard the RV Aranda research vessel. ODM was specifically designed to measure precipitation on ship-based platforms that experience high and variable winds. ODM’s ability to maintain the optimal orientation with respect to the wind allows it to obtain more accurate precipitation measurements in this type of environment. The ODM data were collected as part of the Light Precipitation Validation Experiment (LPVEx) in September and October of 2010 around the Gulf of Finland. The overarching goals of LPVEx were to detect and understand the process of light rainfall formation at high latitudes and to conduct a comprehensive evaluation of precipitation algorithms for current and future satellite platforms. The ODM dataset files are available in ASCII text format from September 15 through September 26, 2010.
The OceanX 2025 campaign on the OceanXplorer research vessel for NASA in collaboration with OceanX to collect critical in-water optical measurements and concentrations of carbon, phytoplankton pigments and community composition across the western Indian O
The OceanX 2025 campaign on the OceanXplorer presented a unique and compelling opportunity for NASA in collaboration with OceanX to collect critical in-water optical measurements and concentrations of carbon, phytoplankton pigments and community composition in the Indian Ocean and eastern Atlantic Ocean. This timing coincides with the second year of NASA's PACE mission, providing an exceptional opportunity for satellite data product validation. The ocean and coastal areas that OceanXplorer navigated through spanned low to high productivity waters, yield many opportunities for clear skies (enabling coincident in situ measurements with satellite observations), and diverse water types (clear blue ocean to algal-rich coastal ocean to more turbid nearshore) makes this opportunity ideal for validating PACE data with crucial in-situ data to ensure the accuracy and reliability of PACE measurements. The primary aim for NASA GSFC/OEL/FSG and PVST participation on the OceanXplorer field campaign in 2025 was to collect a suite of state-of-the-art ocean measurements for the validation of NASA's PACE satellite mission data products. Field measurements included ocean optical properties of ocean radiometry, absorption, attenuation, scattering, as well as phytoplankton pigments, organic carbon, and phytoplankton community composition, biomass and physiology as well as aerosol measurements.
GHRSST Level 2P Sea Surface Temperature version 1.0 from the Electro-Optical Infrared Weather System Geostationary (EWSG2) produced by NAVO
A Group for High Resolution Sea Surface Temperature (GHRSST) Level 2P sea surface temperature dataset produced by the Naval Oceanographic Office (NAVO) from the GOES Imager sensor on the Electro-Optical Infrared Weather System – Geostationary satellite (EWS-G2). The EWS-G2, formerly GOES-15, is the second Department of Defense owned geostationary weather satellite, which has been repositioned over Indian Ocean (IO) region at 60.0° West longitude in September 2023 and fully operational since December 3, 2023, providing timely cloud characterization and theater weather imagery to DoD. The EWS-G2 L2P SST product is calculated based on the 4-micron (band 2) and 11-micron (band 4) channels, providing nighttime and daytime SST. However, daytime SSTs are not produced in areas where the 4-micron channel is strongly affected by Solar radiation, which is defined by solar reflection angle > 50 degrees. The L2P data are packaged according to the GHRSST Data Specification version 2 (GDS2) in netCDF4 format at 0.04-degree spatial resolution and stored in 104 partial disks per day. The data will be continually updated with 24 hours latency.
Ship-Aircraft Bio-Optical Research (SABOR) collaborative campaign
SABOR (Ship-Aircraft Bio-Optical Research) Collaborative campaign occurred from 19 Jul 2014 - 05 Aug 2014 that sampled the Gulf of Maine, near Bermuda, and shore-waters off the East coast of the United States.
Optical Sediment Trap Calibration on the New England coast
Measurements from the Opt_Sed_Trap_Cal (Optical Sediment Trap Calibration) project off the New England coast.
Compact Fiber Optic Strain Sensors (cFOSS) Element
<p>Armstrong researchers are reducing the Fiber Optic Sensing Sysme (FOSS) technology&rsquo;s size, power requirement, weight, and cost to effectively extend opportunities for broader fields of application. Unlike current commercially available systems, which are limited by the number of fibers that are interrogated simultaneously, Armstrong&rsquo;s cFOSS technology maintains its multi-fiber capability (four or eight fibers) while providing a smaller overall form factor. FOSS is the size of a shoebox and weighs 28.5 pounds; cFOSS will be the size of a 6-inch cube and weigh less than 10 pounds. Each component within the system has been custom-designed specifically for miniaturization, thus reducing capital costs. As industries strive for ever smaller profiles, this miniaturization will be an important benefit for multiple markets. For example, small aviation UAVs would benefit significantly from this smaller, more compact, and lightweight package.&nbsp;</p><p><strong>Work to date: </strong>In partnership with the AERO Institute, researchers have flown the cFOSS v1.0 system, a convection-cooled 5-lb version, on a small UAV, interrogating four fibers simultaneously.&nbsp;</p><p><strong>Looking ahead: </strong>By the end of December 2015, cFOSS v2.0, with conduction cooling, will fly on an Antares rocket.&nbsp;</p><p><strong>Benefits</strong></p><ul><li><strong>Cost-efficient:</strong> Each component within the&nbsp;system has been custom designed specifically&nbsp;for miniaturization, thus reducing capital costs</li><li><strong>Compact:</strong> The miniaturized size requires less&nbsp;associated hardware than existing systems</li><li><strong>Reliable:&nbsp;</strong>Components are customized for aggressive environments yet maintain a compact form factor</li></ul><p><strong>Applications</strong></p><ul><li>Aeronautics and launch vehicles</li><li>Medical procedures</li><li>Drilling</li><li>Wind energy</li><li>Automotive testing</li><li>Industrial processes</li></ul>
MODIS/Terra Near Real Time L3 Value-added Aerosol Optical Depth
MODIS was launched aboard the Terra satellite on December 18, 1999 (10:30 am equator crossing time) as part of NASA's Earth Observing System (EOS) mission. MODIS with its 2330 km viewing swath width provides almost daily global coverage. It acquires data in 36 high spectral resolution bands between 0.415 to 14.235 micron with spatial resolutions of 250m(2 bands), 500m(5 bands),and 1000m (29 bands). MODIS sensor counts, calibrated radiances, geolocation products and all derived geophysical atmospheric and ocean products are archived at various DAACs and has been made available to public since April 2000.The shortname for this level-3 MODIS aerosol product is MODAODHD. The Naval Research Laboratory and the University of North Dakota developed this value-added aerosol optical depth dataset based on MODIS Level 2 aerosol products. MODAODHD is a gridded product and is specifically designed for quantitative applications including data assimilation and model validation. It is available through LANCE-MODIS. It offers several enhancements over the MODIS Level 2 data on which it is based. These enhancements include stringent filtering to reduce outliers, eliminate cloud contamination, and exclude conditions where aerosol detection is likely to be inaccurate; reduction of systematic biases over land and ocean by empirical corrections; reduction of random variation in AOD values by spatial averaging; quantitative estimation of uncertainty for each AOD data point.The MxDAODHD granules are produced every six hours, and time-stamped 00:00, 06:00, 12:00, and 18:00 (all times UTC). Each granule includes MODIS observations from +/-3 hours from the timestamp (e.g. 12:00 product includes MODIS data from 09:00-15:00 UTC). Production is initiated as soon as the Level 2 inputs become available in the LANCE system.See the LANCE-MODIS page for more dataset information: https://earthdata.nasa.gov/earth-observation-data/near-real-time/download-nrt-data/modis-nrt
Labrador Sea 1997 optical measurements
Bio-optical validation observations were made on the CCGS Hudson in spring from 9 May to 11 June 1997 in the Labrador Sea. Stations were occupied along several sections between Labrador and Greenland with some locations revisited more than once during a cruise. The most heavily sampled SW-NE section from Hamilton Bank on the Labrador Shelf to Cape Desolation on the Greenland Shelf is the AR7 line of the World Ocean Circulation Experiment.
Combined HSRL and Optical Autocovarience Wind Lidar (HOAWL) Demonstration Project
<p> Demonstrate 2&beta; + 2&alpha; + 2&delta; High Spectral Resolution Lidar (HSRL) and Doppler wind lidar measurements simultaneously at 355nm and 532nm using a single multiwavelength interferometric receiver.<br /> &nbsp;Demonstrate system components:<br /> High efficiency multi-wavelength optical autocovariance interferometer and integrated 2&beta; + 2&alpha; + 2&delta; receiver<br /> HOAWL calibration and retrieval algorithms<br /> Validated radiometric and integrated HOAWL receiver performance models<br /> <br /> &nbsp;</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.