Skip to main content
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

994

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

994 results for “2D”

Learn how ShareScore rates datasets ↗
zenodo36/100

Data: set for "Low-voltage 2D materials-based printed field-effect transistors for integrated digital and analog electronics on paper"

<p>The file reports the raw data of Figure 2, Figure 3 and Figure 4 of the manuscript. Data shown in Figure 2 represent the electrical characterization of the MoS<sub>2</sub> FETs with inkjet-printed silver contacts. Figure 2a is a typical transfer characteristic measured as a function of the gate voltage for a drain voltage of 2.0 V; Figure 2b is a typical output characteristic measured at different gate voltages (from V<sub>GS</sub> = 0.0 V to V<sub>GS</sub> = 1.75 V, steps of 0.25 V). Figure 3 represents the electrical characterization of the MoS<sub>2</sub> FETs with inkjet-printed graphene contacts. In particular, a typical transfer characteristic curve measured as a function of the gate voltage for a drain voltage of 2.5 V is shown and a typical output characteristic curves measured at increasing gate voltages (from V<sub>GS</sub> = 0.0 V to V<sub>GS</sub> = 1.75 V, steps of 0.25 V) are reported in Figure 3b and Figure 3c, respectively. Logic gates and current mirror based on MoS2 FETs with inkjet-printed silver contact are presented in Figure 4. Figure 4c shows the output voltage (left axis) and the voltage gain (right axis) of the inverter gate as a function of the input voltage; Figure 4f the output voltage of the NAND gate as a function of the input states (V<sub>IN1</sub>, V<sub>IN2</sub>). Voltage bias is 5 V for both the inverter and the NAND gate; and Figure 4i g the output current of the current mirror as a function of the output voltage for two different values of the reference current.The file reports the raw data of Figure 2, Figure 3 and Figure 4 of the manuscript. Data shown in Figure 2 represent the electrical characterization of the MoS<sub>2</sub> FETs with inkjet-printed silver contacts. Figure 2a is a typical transfer characteristic measured as a function of the gate voltage for a drain voltage of 2.0 V; Figure 2b is a typical output characteristic measured at different gate voltages (from V<sub>GS</sub> = 0.0 V to V<sub>GS</sub> = 1.75 V, steps of 0.25 V). Figure 3 represents the electrical characterization of the MoS<sub>2</sub> FETs with inkjet-printed graphene contacts. In particular, a typical transfer characteristic curve measured as a function of the gate voltage for a drain voltage of 2.5 V is shown and a typical output characteristic curves measured at increasing gate voltages (from V<sub>GS</sub> = 0.0 V to V<sub>GS</sub> = 1.75 V, steps of 0.25 V) are reported in Figure 3b and Figure 3c, respectively. Logic gates and current mirror based on MoS2 FETs with inkjet-printed silver contact are presented in Figure 4. Figure 4c shows the output voltage (left axis) and the voltage gain (right axis) of the inverter gate as a function of the input voltage; Figure 4f the output voltage of the NAND gate as a function of the input states (V<sub>IN1</sub>, V<sub>IN2</sub>). Voltage bias is 5 V for both the inverter and the NAND gate; and Figure 4i g the output current of the current mirror as a function of the output voltage for two different values of the reference current.</p>

opencc-by-4.0Jul 2020View details →
dryad36/100

DeepProjection: Specific and robust projection of curved 2D tissue sheets from 3D microscopy using deep learning

<p>The efficient extraction of image data from curved tissue sheets embedded in volumetric imaging data remains a serious and unsolved problem in quantitative studies of embryogenesis. Here we present DeepProjection (DP), a trainable projection algorithm based on deep learning. This algorithm is trained on user-generated training data to locally classify the 3D stack content and rapidly and robustly predict binary masks containing the target content, e.g., tissue boundaries, while masking highly fluorescent out-of-plane artifacts. A projection of the masked 3D stack then yields background-free 2D images with undistorted fluorescence intensity values. The binary masks can further be applied to other fluorescent channels or to extract the local tissue curvature. DP is designed as a first processing step than can be followed, for example, by segmentation to track cell fate. We apply DP to follow the dynamic movements of 2D-tissue sheets during dorsal closure in Drosophila embryos and of the periderm layer in the elongating Danio embryo. DeepProjection is available as fully documented Python package.</p>

opencc-zeroOct 2022View details →
zenodo36/100

2d and 3d Drawing in Field Archeology Course

This exercise of photogrammetry was the base for the drawing of my final project for the online course taken at "Koré Formación Online en Patrimonio y Tecnología". The aim was to learn profesional techniques of graphic documentation used at an archeological excavation site. All materials for this exercise were provided at the online platform for the course. Source: Objaverse 1.0 / Sketchfab

opencc-byFeb 2020View details →
zenodo36/100

2D Cell Instance Segmentation Dataset of Master Thesis "Enhancing Cell Instance Segmentation in 3D Microscopy using Self-Supervised ViTs"

<p>This is the 2D cell instance segmentation dataset of master thesis "Enhancing Cell Instance Segmentation in 3D Microscopy using Self-Supervised ViTs". The data is originally from the BBBC038 dataset for the Kaggle 2018 Data Science Bowl. We keep the images with annotations and the final dataset comprises 670 images in the training set and 171 images in the test set. We also converted the dataset to MSCOCO format for convenience.</p>

opencc-zeroApr 2024View details →
zenodo36/100

1. FRACTESUS_CIEMAT_A508Cl3_KJc_018CT_-80_2D

<div>Fractesus project. Fracture test mini-CT. Raw data SA508 Cl.3. CIEMAT. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</div>

opencc-by-4.0Apr 2024View details →
zenodo36/100

Bromination of 2D materials [doi: 10.1088/1361-6528/ad1201]

<p>Primary data, meta data, and corresponding lists of figures &amp; tables are included. [doi: 10.1088/1361-6528/ad1201]</p>

opencc-by-4.0May 2024View details →
zenodo36/100

Synthetic Microstructure Evolution in SLM Processes: 2D Slices from Potts Model Simulations in SPPARKS

<p>The dataset comprises 2D slices of synthetic microstructures, which were simulated under various Selective Laser Melting (SLM) processing conditions.</p> <p>We employed the <em>Potts kinetic Monte Carlo model</em>, which is integrated within the open-source simulation tool, <a href="https://spparks.github.io/">SPPARKS</a>.&nbsp;</p> <p>For the base microstructural information, we utilized a 3D Electron Backscatter Diffraction (EBSD) dataset&mdash;specifically using Inconel 100 for simplicity&mdash;to generate a representative volume element (<a href="https://www.mdpi.com/2073-4352/10/10/944">RVE</a>). This RVE serves as the initial structure from which we evolve the microstructure across different processing conditions that are pertinent to SLM techniques. The description of the parameters is provided in the <a href="https://spparks.github.io/doc/app_am_ellipsoid.html">SPPARKS Docs</a>.</p> <p>The outcome is a dataset of 2D slices that reflect the potential microstructural variations resulting from specific manufacturing scenarios.</p> <p>Please follow the instructions in the <a href="https://github.com/sara-nl/spparks_hpc">SPPARKS_HPC Repo</a>&nbsp;to reproduce the results.</p>

opencc-zeroMay 2024View details →
zenodo36/100

Supplemental material for 'Characterization of structure and mixing in nanoparticle hetero-aggregates using convolutional neural networks: 3D-reconstruction versus 2D-projection'

<p>This is the supplemental data for the manuscript titled &lsquo;<em>Characterization of structure and mixing in nanoparticle hetero-aggregates using convolutional neural networks: 3D-reconstruction versus 2D-projection&rsquo;</em> submitted to <em>Ultramicroscopy</em>.</p> <p><strong>Motivation:</strong></p> <p>Detection of nanoparticles and classification of the material type in scanning transmission electron microscopy (STEM) images can be a tedious task, if it has to be done manually. Therefore, a convolutional neural network (CNN) is trained to do this task for STEM-images of TiO<sub>2</sub>-WO<sub>3</sub> nanoparticle hetero-aggregates. In conventional STEM, only 2D-projection images of the samples can be measured. STEM tomography allows for a 3D-reconstruction but it is a time-consuming and hence expensive task. In the present work, evaluations of 2D-projections are compared quantitatively to evaluations of 3D-reconstructions. For both evaluations a CNN is trained to predict particle positions and classify the material. The present dataset contains training and evaluation data and some code scripts that can be used after installation of the MMDetection toolbox (<a href="https://github.com/open-mmlab/mmdetection">https://github.com/open-mmlab/mmdetection</a>) to train the CNN for 2D-projection data. For 3D-reconstruction a StarDist-3D network is trained (<a href="https://github.com/stardist/stardist">https://github.com/stardist/stardist</a>). Details are provided in the manuscript submitted to Ultramicroscopy and in the comments of the code scripts. For evaluation, we provide Python and MATLAB scripts.</p> <p><strong>Authors and funding:</strong></p> <p>The present dataset was created by the authors. The work was funded by the Deutsche Forschungsgemeinschaft within the priority program SPP2289 under contract numbers RO2057/17-1 and MA3333/25-1 and under contract number INST 144/462-1 FUGG.</p> <pre>&nbsp;</pre> <p><strong>Dataset description:</strong></p> <p>We provide several zip-archives. All of them contain two subfolders, one of them for 2D-projection data, the other one for 3D-reconstruction data.</p> <p><em>training_data.zip</em> contains the training data. In the 3D case, the subfolder <em>mask</em> contains the ground truth segmentation masks; the subfolder <em>reconstruction</em> contains the corresponding simulated 3D reconstructions. In the 2D case, the subfolder <em>HAADF</em> contains the 2D-projection images. In both cases, the subfolder <em>json </em>contains the annotation. Each file within the <em>json</em> folder provides for each image or reconstruction the following information:</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; aggregat_no: image id, the number of the corresponding image file</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_position_x: list of particle position x-coordinates in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_position_y: list of particle position y-coordinates in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_position_z: list of particle position z-coordinates in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_radius: list of volume equivalent particle radii in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_type: list of particle types, 1: TiO<sub>2</sub>, 2: WO<sub>3</sub></p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_shape: list of particle shapes: 0: sphere, 1: box, 2: icosahedron</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; rotation: list of particle rotations in rad. Each particle is rotated twice by the listed angle (before and after deformation)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; deformation: list of particle deformations. After the first rotation the particle x-coordinates of the particle&rsquo;s surface mesh are scaled by the factor listed in deformation, y- and z-coordinates are scaled according to 1/sqrt(deformation).</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; cluster_index: list of cluster indices for each particle</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; initial_cluster_index: list of initial cluster indices for each particle, before primary clusters of the same material were merged</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fractal_dimension: the intended fractal dimension of the aggregate</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fractal_dimension_true: the realized geometric fractal dimension of the aggregate (neglecting particle densities)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fractal_dimension_weight_true: the realized fractal dimension of the aggregate (including particle densities)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fractal_prefactor: fractal prefactor</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mixing_ratio_intended: the intended mixing ratio (fraction of WO<sub>3</sub> particles)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mixing_ratio_true: the realised mixing ratio (fraction of WO<sub>3</sub> particles)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mixing_ratio_volume: the realised mixing ratio (fraction of WO<sub>3</sub> volume)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mixing_ratio_weight: the realised mixing ratio (fraction of WO<sub>3</sub> weight)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_rho: density of TiO<sub>2</sub> used for the calculations</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_size_mean: mean TiO<sub>2</sub> radius</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_size_min: smallest TiO<sub>2</sub> radius</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_size_max: largest TiO<sub>2</sub> radius</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_size_std: standard deviation of TiO<sub>2</sub> radii</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_clustersize: average TiO<sub>2</sub> cluster size</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_clustersize_init: average TiO<sub>2</sub> cluster size of primary clusters (before merging into larger clusters)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_1_clustersize_init_intended: intended TiO<sub>2</sub> cluster size of primary clusters</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_rho: density of WO<sub>3 </sub>used for the calculations</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_size_mean: mean WO<sub>3</sub> radius</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_size_min: smallest WO<sub>3</sub> radius</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_size_max: largest WO<sub>3</sub> radius</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_size_std: standard deviation of WO<sub>3</sub> radii</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_clustersize: average WO<sub>3</sub> cluster size</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_clustersize_init: average WO<sub>3</sub> cluster size of primary clusters (before merging into larger clusters)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; particle_2_clustersize_init_intended: intended WO<sub>3</sub> cluster size of primary clusters</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; number_of_primary_particles: number of particles within the aggregate</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; gyration_radius_geometric: gyration radius of the aggregate (neglecting particle densities)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; gyration_radius_weighted: gyration radius of the aggregate (including particle densities)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mean_coordination: mean total coordination number (particle contacts)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mean_coordination_heterogen: mean heterogeneous coordination number (contacts with particles of the different material)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mean_coordination_homogen: mean homogeneous coordination number (contacts with particles of the same material)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; material_1: the name of the first material (TiO2)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; material_2: the name of the second material (WO3)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; radius_equiv: list of area equivalent particle radii (in projection) in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; k_proj: projection direction of the aggregate: 0: z-direction (axis = 2), 1: x-direction (axis = 1), 2: y-direction (axis = 0)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; polygons: list of polygons that surround the particle (COCO annotation)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; bboxes: list of particle bounding boxes</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; aggregate_size: projected area of the aggregate translated into the radius of a circle in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; n_pix: number of pixel per image in horizontal and vertical direction (squared images)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; pixel_size: pixel size in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; image_size: image size in nm</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; add_poisson_noise: 1 if poisson noise was added, 0 otherwise</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; frame_time: simulated frame time (required for poisson noise)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; dwell_time: dwell time per pixel (required for poisson noise)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; beam_current: beam current (required for poisson noise)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; electrons_per_pixel: number of electrons per pixel</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; dose: electron dose in electrons per &Aring;<sup>2</sup></p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; add_scan_noise: 1 if scan noise was added, 0 otherwise</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; beam_misposition: parameter that describes how far the beam can be misplaced in pm (required for scan noise)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; scan_noise: parameter that describes how far the beam can be misplaced in pix (required for scan noise)</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; add_focus_dependence: 1 if a focus effect is included, 0 otherwise</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; add_partial_coating: 1 if some TiO<sub>2</sub> particles were coated by a thin WO<sub>3</sub> film, 0 otherwise.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; data_format: data format of the images, e.g. uint8</p> <p>For 3D reconstructions, the following information is added:</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; add_image_shifts, 1 if all images of the tilt series were shifted randomly by some pixel to account for misaligned images, 0 otherwise.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; add_projection_noise: 1 if noise was added to projection angles, 0 otherwise.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N_SIRT: number of SIRT iterations for the 3D-reconstruction.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; proj_angles: list of angles used for the projection directions of the tilt series in rad.</p> <p>For the 2D case, there are 24000 training images, 5500 validation images, 5500 test images, and their corresponding annotations. Aggregates and STEM images were obtained with the algorithm explained in the main work. The important data for CNN training is extracted from the files of individual aggregates and concluded in the subfolder <em>COCO</em>. For training, validation and test data there is a file <em>annotation_COCO.json</em> that includes all information required for the CNN training.</p> <p>For the 3D case, there are 100 simulated reconstructions that are divided into 80 training and 20 validation images within the training script.</p> <p>The zip archive <em>models.zip</em> includes the two networks that were trained, evaluated and used for the investigation in the manuscript. In the 2D case, network weights are stored in the file <em>2D_projection/logs/fit/20240209-095952/iter_60000.pth</em>. These weights can be loaded with the jupyter-notebook <em>2D_projection_prediction.ipynb</em>. Furthermore, a configuration file, which is required by the notebooks, is stored as <em>2D_projection/logs/fit</em> <em>20240209-095952/config_file.py</em>. In the 3D case, network weights are stored in <em>3D_reconstruction/model/weights_best.h5</em>. Also for this case, a configuration file is provided. The network can be loaded with the jupyter-notebook <em>3D_reconstruction_prediction.ipynb</em>.</p> <p>The zip archive <em>experiment_measurement.zip</em> includes the experimental 2D-projection images and the experimental 3D-reconstructions investigated in the manuscript. In the 3D case, we provide measured reconstructions as obtained by MATLAB and as transformed for the prediction with the CNN.</p> <p>The zip archive<em> experiment_prediction.zip</em> includes predictions and visualizations obtained by the 2D and 3D CNNs.</p> <p>The zip archive <em>simulation_measurement.zip</em> includes simulated 2D-projection images and simulated 3D-reconstructions that were not used for the network training. These simulations were used for evaluation of trained networks.</p> <p>The zip archive<em> simulation_prediction.zip</em> includes predictions and visualizations obtained by the 2D and 3D CNNs for the simulated data that was not used during the training process.</p> <p>In the zip archive <em>code.zip</em>, we provide several files with Python and MATLAB code that can be used for training, prediction and evaluation of the CNNs. A lot of information is provided within the comments and markdowns. For the application, it is required that the MMDetection toolbox and the StarDist3D framework are installed.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>2D_projection_training.py:</em> This Python script can be used for network training of the 2D Mask R-CNN after installation of the MMDetection toolbox.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>3D_reconstruction_training.py</em>: This Python script can be used for network training of the StarDist-3D network after installation of the StarDist package.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>2D_projection_prediction.ipynb</em>: This jupyter-notebook can be used for the application of a trained Mask R-CNN to experimental and simulated 2D-projection data.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>3D_reconstruction_prediction.ipynb</em>: This jupyter-notebook can be used for the application of a trained StarDist-3D network to experimental and simulated 3D-reconstruction data.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>Evaluation_experiment.m</em>: This MATLAB script is for the visualization and quantitative comparison of 2D and 3D experimental evaluations.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>Evaluation_simulation.m</em>: This MATLAB script is for the visualization and quantitative comparison of 2D and 3D evaluations of simulations.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>particle_detection_functions.py:</em> This Python script contains functions required by the jupyter-notebooks. Details can be found within the comments.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>ASTRA_CM_plot_results.m</em>: This MATLAB script provides functions for the visualization of experimental and simulated 3D-reconstructions.</p> <p>&middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>ASTRA_CM_particle_detection.m</em>: This MATLAB script is used for the quantitative evaluation of segmentations of 3D-reconstructions.</p> <p>&nbsp;</p> <p>There is no confidential data in this dataset. It is neither offensive, nor insulting or threatening.</p> <p>The dataset was generated to discriminate between TiO<sub>2 </sub>and WO<sub>3</sub> nanoparticles in STEM-images and STEM tomography reconstructions. It might be possible that it can discriminate between different materials if the STEM contrast is similar to the contrast of TiO<sub>2 </sub>and WO<sub>3</sub> but there is no guarantee.</p>

opencc-by-4.0May 2024View details →
zenodo36/100

Transcriptomic characterization of 2D and 3D human induced pluripotent stem cell-based in vitro models as New Approach Methodologies for developmental neurotoxicity testing

<p><strong>Abstract:</strong>&nbsp; The safety and developmental neurotoxicity (DNT) potential of chemicals remain critically understudied due to limitations of current in vivo testing guidelines, which are low throughput, resource-intensive, and hindered by species differences that limit their relevance to human health. To address these issues, robust new approach methodologies (NAMs) using deeply characterized cell models are essential. This study presents the comprehensive transcriptomic characterization of two advanced human-induced pluripotent stem cell (hiPSC)-derived models: a 2D adherent and a 3D neurosphere model of human neural progenitor cells (hiNPCs) differentiated up to 21 days. Using high-throughput RNA sequencing, we compared gene expression profiles of 2D and 3D models at three developmental stages (3, 14, and 21 days of differentiation). Both models exhibit maturation towards post-mitotic neurons, with the 3D model maturing faster and showing a higher prevalence of GABAergic neurons, while the 2D model is enriched with glutamatergic neurons. Both models demonstrate broad applicability domains, including excitatory and inhibitory neurons, astrocytes, and key endocrine and especially the understudied cholinergic receptors. Comparison with human fetal brain samples confirms their physiological relevance. This study provides novel in-depth applicability insights into the temporal and dimensional aspects of hiPSC-derived neural models for DNT testing. The complementary use of these two models is highlighted: the 2D model excels in synaptogenesis assessment, while the 3D model is particularly suited for neural network formation as observed as well in previous functional studies with these models. This research marks a significant advancement in developing human-relevant, high-throughput DNT assays for regulatory purposes.</p> <p><strong>This data sets contains:</strong></p> <p><strong>Tab. S1</strong> - Significant genes results</p> <p><strong>Tab. S2</strong> - Enriched pathways_GO_Biological Processes</p> <p><strong>Tab. S3</strong> - Enriched pathways_GO_Cellular Components</p> <p><strong>Tab. S4</strong> - Enriched pathways_GO_Molecular Function</p> <p><strong>Tab. S5</strong> - Enriched pathways_KEGG</p> <p><strong>Tab. S6</strong> - EnrichEnriched pathways_Panther</p> <p><strong>Tab. S7</strong> - Enriched pathways_Reactome</p> <p><strong>Tab. S8</strong> - Gene counts</p> <p><strong>Tab. S9</strong> - Gene selection for targeted analysis</p>

opencc-by-4.0May 2024View details →
zenodo36/100

Dataset for Enhancing nitrogen reduction reaction through formation of 2D hybrid heterostructures of MoS2@rGO

<p>Dataset for publication &nbsp;Enhancing nitrogen reduction reaction through formation of 2D2D hybrid heterostructures of MoS2@rGO. All details about how to work with the dataset is included within the readme file.</p> <p>&nbsp;</p>

opencc-by-4.0May 2024View details →
zenodo36/100

Evolution of plasma properties in 2D particle-in-cell simulations of pulsar polar caps as function of dipole inclination angle

<p>The video shows the evolution of plasma properties in polar cap region of neutron stars from initial simulation conditions to the quasi-periodic pair creation. Three inclination angles of magnetic dipole axis to the star rotation axis are investigate \iota = 0&deg;, 45&deg;, and 90&deg;.</p> <p>The presented quantities are (in rows): Parallel current density, parallel electric field, parallel and perpendicular Poynting flux, electron and positron plasma density, and electron and positron plasma bulk momenta.</p> <p>&nbsp;</p>

opencc-by-nc-nd-4.0May 2024View details →
zenodo36/100

2D Array of Pulse Coupled Oscillators Driving Cilia to Demonstrate Metachronal Waves

<p>The video demonstrates&nbsp; metachornal waves from an 2D array of delay locked pulse coupled oscillators, each mapping to a cilia.<br>Within the triangle structure, the oscillators are coupled to their nearest neighbors.</p>

opencc-by-4.0Jun 2024View details →
zenodo36/100

Bottom-up Fabrication of 2D Rydberg Exciton Arrays in Cuprous Oxide

Open the record for dataset details and reuse information.

opencc-by-4.0Jun 2024View details →
zenodo36/100

Reshaping Foramen Magnum Research. Analyzing foramen magnum variation in modern humans using 2D osteometry and 3D geometric morphometrics – A master thesis summary and research review. Supplementary Materials.

<p>This supplementary materials document refers to: <em>G&ouml;ldner, D., 2024. Reshaping Foramen Magnum Research. Analyzing foramen magnum variation in modern humans using 2D osteometry and 3D geometric morphometrics &ndash; A master thesis summary and research review.&nbsp;Mitteilungen der Berliner Gesellschaft f&uuml;r Anthropologie, Ethnologie und Urgeschichte 44 (2023).</em></p> <p>&nbsp;</p> <p>&nbsp;</p>

opencc-by-4.0Oct 2023View details →
zenodo36/100

Intramuros 2D and 3D Visualizations

<p>This dataset was generated through a thesis titled:</p> <p>Disaster Dimensions: Utilizing Geospatial Technologies and Scenario Building for Effective Inundation Risk Management and Communication in Intramuros, Manila</p> <p>Using digital terrain model (DTM) and digital surface model (DSM) data derived from point clouds, the study generated permanent and temporary inundation scenarios of Intramuros, Manila from 2030 to 2150. Permanent inundation scenarios incorporate land subsidence rates and sea level rise projections from the Intergovernmental Panel on Climate Change (IPCC) and National Aeronautics and Space Administration (NASA), considering Shared Socioeconomic Pathways (SSPs). Temporary inundation scenarios integrate storm surge advisories to visualize flood extents per advisory level.</p> <p><span>Acknowledgments:</span></p> <p><span>The sea level rise projections were supported by several grants from NASA (80NSSC17K0698, 80NSSC20K1724, 80NSSC21K0322, and JPL task 105393.509496.02.08.13.31), NSF (ICER-1663807), U.K. NERC (NE/T009381/1 and NE/T007443/1), NIOZ, and the EU&rsquo;s Horizon 2020 programme (grant 869304). In addition, I acknowledge the World Climate Research Programme, the CMIP6 climate modeling groups, and the Earth System Grid Federation (ESGF) for data access and archiving. <br><br>The drone-derived aerial imagery of Intramuros was provided by OpenStreetMap PH and DATUM PH under the 2021 Drone Imagery Collection Grant.</span></p>

opencc-by-4.0Jun 2024View details →
zenodo36/100

High Entropy 2D Metals Sulfides: Fast Synthesis, Exfoliation and Electrochemical Activity in Overall Water Splitting at Alkaline pH

<p>Dataset for the article "High Entropy 2D Metals Sulfides: Fast Synthesis, Exfoliation and Electrochemical Activity in Overall Water Splitting at Alkaline pH"</p>

opencc-by-4.0Jun 2024View details →
zenodo36/100

Inputs for 2D HEC-RAS model for sensitivity analysis of DEM and mesh grid resolutions over part of the Virginia Tech StREAM Lab

<p>Inputs into a 2D HEC-RAS model used in the article written by Elizabeth M. Prior, Nathan Michaelson, Jonathan A. Czuba, Thomas J. Pingel, Valerie A. Thomas, and W. Cully Hession titled "Lidar DEM and computational mesh grid resolutions modify roughness in 2D hydrodynamic models".</p>

opencc-by-4.0Jul 2024View details →
zenodo36/100

Adaptive Computer Vision-Based 2D Tracking of Workers in Complex Environments

<p>Data set used for testing the efficiency of a vision-based tracking method&nbsp;on tracking construction workers.&nbsp;</p>

opencc-by-4.0Dec 2017View details →
zenodo36/100

Automated measurement of fetal head circumference using 2D ultrasound images

<p>For more information about this dataset go to:&nbsp;<a href="https://hc18.grand-challenge.org/">https://hc18.grand-challenge.org/</a></p>

opencc-by-4.0Jul 2018View details →
zenodo36/100

Unveiling the Mechanisms of Solid-State Dewetting in Solid Oxide Cells with Novel 2D Electrodes

<p>Supporting videos as a part of the Supplementary Material of the paper published by the Journal of Power Sources, Volume 420, 30 April 2019, Pages 124-133 doi:&nbsp;10.1016/j.jpowsour.2019.02.068</p>

opencc-by-4.0Jan 2019View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.