Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

509

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

509 results for “Version 2”

Learn how ShareScore rates datasets ↗
nasa28/100

SWOT Level 2 River Cycle-Averaged Data Product, Version D

Cycle average and aggregation of river reach pass data within predefined hydrological basins. Basin for each cycle. Available in Shapefile file format.<br>

restrictednotspecifiedApr 2025View details →
nasa28/100

SWOT Simulated Level 2 North America Continent High Rate Raster Product Version 1.0

This dataset contains a simulated rasterized water surface elevation and inundation-extent product to be provided by the Surface Water and Ocean Topography (SWOT) mission. SWOT will provide a global coverage but this simulated subset focuses on the North America continent. This is a derived product through resampling the upstream dataset L2_HR_PIXC_V1 and L2_HR_PIXCVEC_V1 onto a uniform grid over the North America continent. A uniform grid is superimposed onto the pixel cloud from the source products, and all pixel-cloud samples within each grid cell are aggregated to produce a single value per raster cell. The raster data are produced geographically fixed tiles at resolutions of 100 m and 250 m in a Universal Transverse Mercator projection grid. Note that this is a simulated SWOT product and not suited for any scientific exploration.

restrictednotspecifiedApr 2025View details →
nasa28/100

OPERA Land Surface Disturbance Alert from Harmonized Landsat Sentinel-2 product (Version 1)

The Observational Products for End-Users from Remote Sensing Analysis ([OPERA](https://www.jpl.nasa.gov/go/opera)) Land Surface Disturbance Alert from Harmonized Landsat Sentinel-2 (HLS) product Version 1 maps vegetation disturbance alerts that are derived from data collected by Landsat 8 and Landsat 9 Operational Land Imager (OLI) and Sentinel-2A, Sentinel-2B, and Sentinel-2C Multi-Spectral Instrument (MSI). A vegetation disturbance alert is detected at 30 meter (m) spatial resolution when there is an indicated decrease in vegetation cover within an HLS pixel. The Level-3 data product also provides additional information about more general disturbance trends and auxiliary generic disturbance information as determined from the variations of the reflectance through the HLS scenes. [HLS](https://lpdaac.usgs.gov/product_search/?collections=HLS&status=Operational&view=list) data represent the highest temporal frequency data available at medium spatial resolution. The combined observations will provide greater sensitivity to land changes, whether of large magnitude/short duration or small magnitude/long duration.The OPERA_L3_DIST-ALERT-HLS (or DIST-ALERT) data product is provided in Cloud Optimized GeoTIFF (COG) format, and each layer is distributed as a separate file. There are 19 layers contained within the DIST-ALERT product. The layers for both vegetation and generic disturbance include disturbance status, loss or anomaly, maximum loss anomaly, disturbance confidence layer, date of disturbance, count of observations with loss anomalies, days of ongoing anomalies, and day of last disturbance detection. Additional layers are vegetation cover percent, historical percent vegetation cover, and data mask. See the Product Specification Document (PSD) for a more detailed description of the individual layers provided in the DIST-ALERT product.The OPERA_L3_DIST-ALERT-HLS product contains modified Copernicus Sentinel data (2020-2025).Known Issues* Additional usage constraints are provided under Section 5 of the Algorithm Theoretical Basis Document (ATBD).

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 2P Western Atlantic Regional Skin Sea Surface Temperature from the Geostationary Operational Environmental Satellites (GOES) Imager on the GOES-13 satellite (GDS version 2)

The Geostationary Operational Environmental Satellites (GOES) operated by the United States National Oceanic and Atmospheric Administration (NOAA) support weather forecasting, severe storm tracking, meteorology and oceanography research. Generally there are several GOES satellites in geosynchronous orbit at any one time viewing different earth locations including the GOES-13 launched 24 May 2006. The radiometer aboard the satellite, The GOES N-P Imager, is a five channel (one visible, four infrared) imaging radiometer designed to sense radiant and solar reflected energy from sampled areas of the earth. The multi-element spectral channels simultaneously sweep east-west and west-east along a north-to-south path by means of a two-axis mirror scan system retuning telemetry in 10-bit precision. For this Group for High Resolution Sea Surface Temperature (GHRSST) dataset, skin sea surface temperature (SST) measurements are calculated from the far IR channels of GOES-13 at full resolution on a half hourly basis. In native satellite projection, vertically adjacent pixels are averaged and read out at every pixel. L2P datasets including Single Sensor Error Statistics (SSES) are then derived following the GHRSST Data Processing Specification (GDS) version 2.0. The full disk image is subsetted into granules representing distinct northern and southern regions.

restrictednotspecifiedApr 2025View details →
nasa28/100

SCATSAT-1 ESDR Level 2 Ancillary Ocean Surface Fields Version 1.1

This dataset contains the first science quality release (post-provisional after v1.0) of the MEaSUREs-funded Earth Science Data Record (ESDR) of ancillary data corresponding to the SCATSAT-1 Level 2 (L2) data products, interpolated in space and time to the scatterometer observations. These auxiliary fields are included to complement those scatterometer observations, specifically for the SCATSAT_ESDR_L2_WIND_STRESS_V1.1 dataset. The fields include: i) ocean surface wind fields from ERA-5 short-term forecast (removed from the analyses times to reduce impacts from assimilated scatterometer retrievals at the beginning of the forecast); ii) collocated in space and time estimations of precipitation from the GPM IMERG product; iii) estimation of the surface currents from the GlobCurrent project. These auxiliary fields are included to complement the scatterometer observation fields and to help in the evaluation process. They are provided on a non-uniform grid within the native L2 SCATSAT-1 sampled locations at a nominal 12.5 km pixel resolution. Each file corresponds to a specific orbital revolution (rev) number, which begins at the southernmost point of the ascending orbit. The thumbnail shows data for two orbits - using all orbits for a single day will provide global coverage.<br><br>The dataset represents the first science quality release of this product with funding from the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. Version 1.1 provides a set of updates and improvements from version 1.0, including: 1) improved variable metadata, 2) removed the GlobCurrent stokes drift variables, and 3) provided data source metadata including DOIs for the ERA-5, IMERGE, and GlobCurrent data sources. The primary purpose of this release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST).

restrictednotspecifiedApr 2025View details →
nasa28/100

SWOT Simulated Level-2 Nadir SSH from GLORYS for Cal/Val Version 1

This dataset provides simulated sea surface height (SSH) in a format similar to the future SWOT Level 2 (L2) altimetry data from the Poseidon 3C nadir altimeter. The simulated data are from the Global Ocean Reanalysis and Simulations (GLORYS). SSH data from GLORYS were rendered from their native output format into the format prescribed in the SWOT L2 SSH PDD to aid ongoing data product development and to benefit future users of data produced during operational phases of the SWOT mission.

restrictednotspecifiedApr 2025View details →
nasa28/100

SCATSAT-1 Inter-Calibrated ESDR Level 2 Observed and Modeled Spatial Derivatives of Surface Wind and Wind Stress Version 1.0

This dataset contains the curl and divergence of ocean surface equivalent neutral wind and wind stress, derived from satellite-based scatterometer observations aboard SCATSAT-1, representing the first science quality release of these data funded under the MEaSUREs program. This product from SCATSAT-1 has been intercalibrated with similar scatterometer measurements from instruments on the MetOp-A, MetOp-B, and QuikScat satellites, all of which can be found on the MEaSUREs OSVW Project Page. These Level 2 data are provided on a non-uniform grid within the satellite swath at ~12.5 km pixel resolution. Each L2 file corresponds to a specific orbital revolution number, which begins at the southernmost point of the ascending orbit. There are typically 14 orbits per day, and the thumbnail preview shows coverage for the first ten orbits in an example day. Estimates for the curls and divergences are computed over several spatial domains with varying radii from the point of interest, and included as separate variables.<br><br>The dataset represents the first science quality release funded under the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. The primary purpose of this release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST). This V1.0 of the data was derived from V1.1 of the L2 wind and stress product.

restrictednotspecifiedJul 2025View details →
nasa28/100

SWOT Level 2 Lake Single-Pass Vector Data Product, Version C

The SWOT Level 2 Lake Single-Pass Vector Data Product from the Surface Water Ocean Topography (SWOT) mission provides water surface elevation, area, storage change derived from the high rate (HR) data stream from the Ka-band Radar Interferometer (KaRIn). SWOT launched on December 16, 2022 from Vandenberg Air Force Base in California into a 1-day repeat orbit for the "calibration" or "fast-sampling" phase of the mission, which completed in early July 2023. After the calibration phase, SWOT entered a 21-day repeat orbit in August 2023 to start the "science" phase of the mission, which is expected to continue through 2025. <br>Water surface elevation, area, and storage change are provided in three feature datasets covering the full swath for each continent-pass: 1) an observation-oriented feature dataset of lakes identified in the prior lake database (PLD), 2) a PLD-oriented feature dataset of lakes identified in the PLD, and 3) a feature dataset containing unassigned features (i.e., not identified in PLD nor prior river database (PRD)). These data are generally produced for inland and coastal hydrology surfaces, as controlled by the reloadable KaRIn HR mask. The dataset is distributed in ESRI Shapefile format.<br>Please note that this collection contains SWOT Version C science data products.<br>This dataset is the parent collection to the following sub-collections: <br>https://podaac.jpl.nasa.gov/dataset/SWOT_L2_HR_LakeSP_obs_2.0 <br>https://podaac.jpl.nasa.gov/dataset/SWOT_L2_HR_LakeSP_prior_2.0 <br>https://podaac.jpl.nasa.gov/dataset/SWOT_L2_HR_LakeSP_unassigned_2.0 <br>

restrictednotspecifiedApr 2025View details →
nasa28/100

Monthly Frequency of Dust Storm over Land for Varying Intensities, Based on MODIS Aqua Deep Blue Level 2 Aerosol Products MYD04_L2 Collection 6.1, on a Global 0.1 by 0.1 Degree Grid, Level 3 Version 1 (MYDFDS_MON_GLB_L3) at GES DISC

Version 1 is the current version of the dataset.This collection MYDFDS_MON_GLB_L3 provides level 3 monthly frequency of dust storms (FDS) over land from 175°W to 175°E and 80°S to 80°N at a spatial resolution of 0.1˚ x 0.1˚. It is derived from Level 2, the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue aerosol products Collection 6.1 from Aqua (MYD04_L2). The dataset covers the monthly mean from 2003 to 2022.The FDS is calculated as the number of days per month when the daily dust optical depth is greater than a threshold optical depth (e.g., 0.025) with two quality flags: the lowest (1) and highest (3). It is advised to use flag 1, which is of lower quality, over dust source regions, and flag 3 over remote areas or polluted regions. Eight thresholds (0.025, 0.05, 0.1, 0.25, 0.5, 0.75, 1, 2) are saved separately in eight files.If you have any questions, please read the README document first and post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 4 AVHRR_OI Global Blended Sea Surface Temperature Analysis (GDS version 2) from NCEI

A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.25 degree grid at the NOAA National Centers for Environmental Information. This product uses optimal interpolation (OI) by interpolating and extrapolating SST observations from different sources, resulting in a smoothed complete field. The sources of data are satellite (AVHRR) and in situ platforms (i.e., ships and buoys), and the specific datasets employed may change over. At the marginal ice zone, sea ice concentrations are used to generate proxy SSTs. A preliminary version of this file is produced in near-real time (1-day latency), and then replaced with a final version after 2 weeks. Note that this is the AVHRR-ONLY (AVHRR-OI), available from September 1, 1981, but there is a companion SST product that includes microwave satellite data, available from June 2002.

restrictednotspecifiedApr 2025View details →
nasa28/100

Global Space-based Stratospheric Aerosol Climatology Version 2.1

The Global Space-based Stratospheric Aerosol Climatology, or GloSSAC, is a 42-year climatology of stratospheric aerosol properties focused on extinction coefficient measurements by the Stratospheric Aerosol and Gas Experiment (SAGE) series of instruments through mid-2005 and later from mid-2017 and on the Optical Spectrograph and InfraRed Imager System (OSIRIS) and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) data thereafter. Data from other space instruments and from ground-based, air and balloon borne instruments to fill in key gaps in the data set. The end result is a global and gap-free data set focused on aerosol extinction coefficient at 525 and 1020 nm and other parameters on an ‘as available’ basis.

restrictednotspecifiedApr 2025View details →
nasa28/100

GEDI L4C Footprint Level Waveform Structural Complexity Index, Version 2

This dataset contains Global Ecosystem Dynamics Investigation (GEDI) Level 4C (L4C) Version 2 predictions of the Waveform Structural Complexity Index (WSCI) and estimates of prediction intervals for each footprint estimate at 95% confidence. In this version, the granules are in sub-orbits. The algorithm setting group selection used for GEDI04_C is the same as in the GEDI02_A product. The footprints are located within the global latitude band observed by the International Space Station (ISS), nominally 51.6 degrees N and S and reported for the period 2019-04-17 to 2023-03-16. The GEDI instrument consists of three lasers producing a total of eight beam ground transects, which instantaneously sample eight ~25 m footprints spaced approximately every 60 m along-track. The GEDI beam transects are spaced approximately 600 m apart on the Earth's surface in the cross-track direction, for an across-track width of ~4.2 km. Footprint WSCI was derived from XGBoost regression models relating simulated GEDI Level 2A (L2A) waveform relative height (RH) metrics to a 3D structural complexity metric calculated from matched Airborne laser Scanning (ALS) point clouds. Four global WSCI models were trained on a plant functional type (PFT) basis (i.e., deciduous broadleaf trees, evergreen broadleaf trees, evergreen needleleaf trees, and the combination of grasslands, shrubs, and woodlands). For each of the eight beams, additional data are reported with the WSCI estimates, including the associated uncertainty metrics, quality flags, and other information about the GEDI L2A waveform for this selected algorithm setting group. Additional model outputs include WSCI predictions for each of the six GEDI L2A algorithm setting groups and associated prediction intervals. Providing these ancillary data products will allow users to evaluate and select alternative algorithm setting groups. The data are provided in HDF5 format.

restrictednotspecifiedApr 2025View details →
nasa28/100

ATom: Measurements from the Quantum Cascade Laser System (QCLS), Version 2

This dataset provides atmospheric concentrations of CO2, CH4, CO, and N2O measured by the Harvard Quantum Cascade Laser System (QCLS) instruments during airborne campaigns conducted by NASA's Atmospheric Tomography (ATom) mission. The QCLS (DUAL and CO2) instrument package contains two separate optical assemblies and calibration systems, and a common data system and power supply. The QCLS DUAL instrument simultaneously measures CO, CH4, and N2O concentrations, in situ, using two thermoelectrically cooled pulsed-quantum cascade lasers light sources, a multiple pass absorption cell, and two liquid nitrogen-cooled solid-state detectors. The QCLS CO2 instrument measures CO2 concentrations in situ using a thermoelectrically cooled pulsed-quantum cascade laser light source, gas cells, and liquid nitrogen cooled solid-state detectors. The CO2 mixing ratio of air flowing through the sample gas cell is determined by measuring absorption from a single infrared transition line at 4.32 microns relative to a reference gas of known concentration.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA SCP Arctic and Antarctic Ice Extent from QuikSCAT, 1999-2009, Version 2

This data set provides sea ice extent for the Arctic (60-90 degrees North) and Antarctic (52-90 degrees South) in Scatterometer Image Reconstruction (SIR) binary image format, along with ASCII text files containing latitude and longitude coordinates along the sea ice edge, and browse images of SIR files in Graphics Interchange Format (GIF) format. Ancillary products include daily-averaged total sea ice extent in ASCII format. Estimates of sea ice extent were produced from daily-averaged QuikSCAT sigma-0 measurements and extend from 19 July 1999 to 31 December 2009.QuikSCAT obtains 12 individual radar normalized backscatter (sigma-0) measurements, called slices, for each footprint as it scans over a 1800 km wide swath. Slices are typically 4 to 6 km long by 20 km wide. The summed measurements of the slices are called egg measurements. The effective resolution and shape of each egg measurement is approximately 20 by 30 km, depending on the antenna beam and instrument mode. This data set contains both slice and egg images for each day.The Microwave Earth Remote Sensing (MERS) group at Brigham Young University (BYU) developed a SIR-with-filtering (SIRF) algorithm that combines forward- and aft-looking sigma-0 measurements to produce enhanced-resolution backscatter images over various azimuth angles. The polarization ratio, incidence angle dependence, and the sigma-0 estimate error standard deviation were used to discriminate between sea ice and ocean. Sea ice extent was estimated for both slice and egg images. The nominal pixel resolution of the slice images is 2.225 km with an estimated effective resolution of approximately 4 km. Egg images have a nominal pixel resolution of 4.45 km with an estimated effective resolution of approximately 8 to 10 km.Data and browse images are available via FTP, along with C, Fortran, and Interactive Data Language (IDL) tools to read and display the SIR images.

restrictednotspecifiedApr 2025View details →
nasa28/100

Images of Antarctic Ice Shelves, Version 2

Images of Antarctic Ice Shelves is a data set created as part of an effort to closely monitor major ice streams and outlet glaciers along the Antarctic coast, with a focus on the ice shelves considered the most susceptible to rapid change due to climatic warming and those that occasionally calve major icebergs. This monitoring effort began using AVHRR 1 Km images from several NOAA polar-orbiting satellites, and later included MODIS images from both Terra and Aqua. The scenes are derived from either the visible or the thermal channels. AVHRR images are available from August 1989 to October 2001, while MODIS images are available from March 2000 to present. New images processed from the MODIS Level 1B Calibrated Radiances are provided every month.

restrictednotspecifiedApr 2025View details →
nasa28/100

Standard Deviation of Monthly Frequency of Dust Storm over Land for Varying Intensities, Based on MODIS Aqua Deep Blue Level 2 Aerosol Products MYD04_L2 Collection 6.1, on a Global 0.1 by 0.1 Degree Grid, Level 3 Version 1 (MYDFDS_SDV_GLB_L3) at GES DISC

Version 1 is the current version of the dataset.This collection MYDFDS_SDV_GLB_L3 provides level 3 standard deviation of climatological monthly frequency of dust storms (FDS) over land from 175°W to 175°E and 80°S to 80°N at a spatial resolution of 0.1˚ x 0.1˚. It is derived from Level 2, the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue aerosol products Collection 6.1 from Aqua (MYD04_L2). The dataset is the standard deviation of climatological monthly mean for each month over 2003 to 2022.The FDS is calculated as the number of days per month when the daily dust optical depth is greater than a threshold optical depth (e.g., 0.025) with two quality flags: the lowest (1) and highest (3). It is advised to use flag 1, which is of lower quality, over dust source regions, and flag 3 over remote areas or polluted regions. Eight thresholds (0.025, 0.05, 0.1, 0.25, 0.5, 0.75, 1, 2) are saved separately in eight files.If you have any questions, please read the README document first and post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).

restrictednotspecifiedApr 2025View details →
nasa28/100

SWOT Level 2 Nadir Altimeter Operational Geophysical Data Record with Waveforms - GDR Version D

Same as L2_NALT_GDR using predicted values for some auxiliary data, and does not have GIM ionosphere model values. Uses the onboard DORIS orbit ephemeris. Available with latency of < 7 hours. Discrete measurements at nadir for each data downlink, along the ground track. Available in netCDF-4 file format.<br>This collection is a sub-collection of its parent: https://podaac.jpl.nasa.gov/dataset/SWOT_L2_NALT_OGDR_D

restrictednotspecifiedMay 2025View details →
nasa28/100

SWOT Simulated Level-2 Nadir SSH from GLORYS for Science Version 1

This dataset provides simulated sea surface height (SSH) in a format similar to the future SWOT Level 2 (L2) altimetry data from the Poseidon 3C nadir altimeter. The simulated data are from the Global Ocean Reanalysis and Simulations (GLORYS). SSH data from GLORYS were rendered from their native output format into the format prescribed in the SWOT L2 SSH PDD to aid ongoing data product development and to benefit future users of data produced during operational phases of the SWOT mission.

restrictednotspecifiedApr 2025View details →
nasa28/100

Oceansat-2 Scatterometer Level 2B Ocean Wind Vectors in 12.5km Slice Composites Version 2

This dataset consists of the version 2 Level 2B science-quality ocean surface wind vector retrievals from the Oceansat-2 scatterometer (OSCAT), which was designed and launched by the Indian Space Research Organization (ISRO) 23 September 2009. This Level 2B dataset is produced by the Jet Propulsion Laboratory (JPL) QuikSCAT Project in cooperation with ISRO. The retrievals are provided on a non-uniform grid within the swath at 12.5 km pixel resolution. This resolution is achieved through a slice composite technique in which high resolution slice measurements from L1B data are composited into a 12.5 km wind vector cell. This newest version contains an improved geophysical model function (GMF), known as QSCAT12, consistent with the Remote Sensing Systems Ku2011 GMF, and an improved rain detection and flagging algorithm; these algorithms are consistent with the latest reprocessed version 3 QuikSCAT L2B dataset. Each L2B file corresponds to a specific orbital revolution (rev) number, which begins at the southernmost point of the ascending orbit. As a Ku-band dual pencil-beam rotating scatterometer, OSCAT design specs bear a strong resemblence of the Ku-band SeaWinds scatterometers on QuikSCAT and Midori-II (ADEOS-II). The primary difference between OSCAT and SeaWinds is the ~4 degree increase in the OSCAT incidence angle, which acts as an offset to the relatively lower altitude of Oceansat-2 to help provide a nearly identical swath width to SeaWinds. In the early phase of cal/val, the JPL QuikSCAT Project identified several problems, most of which have been corrected in this latest L2B version. This dataset release is expected to have an accuracy similar to that of the version 3 L2B QuikSCAT product, with minor caveats, all of which are described by Jaruwatanadilok et al. (2014) and summarized in the User Guide document which is made available in PO.DAAC Drive at https://podaac-tools.jpl.nasa.gov/drive/files/allData/oceansat2/L2B/oscat/jpl/docs/ . Read software is made available in MATLAB, Python, R, and IDL and is accessible in PO.DAAC Drive at https://podaac-tools.jpl.nasa.gov/drive/files/allData/oceansat2/L2B/oscat/jpl/sw/ .

restrictednotspecifiedApr 2025View details →
nasa28/100

Metop-A ASCAT Inter-Calibrated ESDR Level 2 Observed and Modeled Spatial Derivatives of Surface Wind and Wind Stress Version 1.0

This dataset contains the curl and divergence of ocean surface equivalent neutral wind and wind stress, derived from satellite-based scatterometer observations (the MetOp-A ASCAT scatterometer), representing the first science quality release of these data funded under the MEaSUREs program. This product from MetOp-A ASCAT has been intercalibrated with similar scatterometer measurements from instruments on the MetOp-B, ScatSat-1, and QuikScat satellites, all of which can be found on the MEaSUREs OSVW Project Page. These Level 2 data are provided on a non-uniform grid within the satellite swath at ~12.5 km pixel resolution. Each L2 file corresponds to a specific orbital revolution number, which begins at the southernmost point of the ascending orbit - the thumbnail preview shows data for all orbits over a day (typically 14 orbits). Estimates for the curls and divergences are computed over several spatial domains with varying radii from the point of interest, and included as separate variables.<br><br>The dataset represents the first science quality release funded under the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. The primary purpose of this release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST). This V1.0 of the data was derived from V1.1 of the L2 wind and stress product.

restrictednotspecifiedJul 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.