Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
287
datasets available to search
ShareScore release 0.9.0
Dataset results
287 results for “alloy”
Raw NMR data for Structural Studies of Alloyed and Nanoparticulate Transition Metal Dichalcogenides by Selenium-77 Solid-State Nuclear Magnetic Resonance Spectroscopy
<p>Raw NMR data for main text figures.</p>
Appendix of Effects of Fe and Zn additions on microstructure and mechani-cal properties of Al–10Si-Mg alloy
<p>本文第 3.1 节中保存的迭代结果数据</p>
Figure 2 from: Dasari S (2016) Studying the effect of Ruthenium on High Temperature Mechanical Properties of Nickel Based Superalloys and Determining the Universal Behavior of Ruthenium at Atomic Scale with respect to alloying elements, Stress and Temperature. Research Ideas and Outcomes 2: e10714. https://doi.org/10.3897/rio.2.e10714
Figure 2 - All features of the microstructures from the six samples taken before and after creep tests
INVESTIGATION OF SCANDIUM ALLOY ON THE STRUCTURE OF THE SILICON SURFACE LAYER
Open the record for dataset details and reuse information.
Rational design of stable bimetallic and trimetallic nickel-based single-atom alloys for acetic acid dehydrogenation
<p>Data access for the paper publication.</p>
Melting experiments on Fe-S-O-C alloys at Martian core conditions: Possible structures in the O- and C-bearing core of Mars
Open the record for dataset details and reuse information.
Tabela de Formulações quimicas para patinas em ligas de cobre / Table of chemical formulations for patinas on copper alloys/ Tableau des formulations chimiques des patines sur alliages cuivreux
<pre>This research work was developed as part of my doctoral thesis on the artistic production techniques of bronze sculptures by Auguste Rodin – at DCR-FCT-NOVA, funded by the Fundação para a Ciência e Tecnologia. The text presented elwere sought to focus on the gap in knowledge about chemical formulations for the production of colored oxidized surfaces on copper alloy sculptures between 1840-1917. Here we carry out a literature review, and propose a synthesis, in the form of tables, of the possible formulations in that period (systematization of secondary data), in order to contribute to the understanding of the artistic production techniques of these surface finishes. This knowledge is essential for a critical analysis of the conservation of sculptures in copper alloys from this period, and essential to be able to make any kind of analogy based on the material characterization data of works of art from this period. The information conveyed here brings light to methodologies in the 19th century for obtaining the 7 main colors, will allow discussing terminology issues related to chemical formulation in the 19th century, as well as providing secondary data that will enable the material characterization of the original surface of the sculptures in “ patinated bronze”. we present here a set of 4 primary data systematization tables on which the production of the text is based. The tables were created in Excel, because of the estension of the data present. The text is in Englis, french and Portuguese Table 1 Systematization of transcribed wordings (original data); </pre> <p>Table 2: systematization of standardized formulations</p> <pre>Table 3: glossary plus Bibliographical references/ Reference Bibliographiques / Referências Bibliográficas</pre> <p>table 4: Sources / Cases / resume</p> <p>Table 5:Bronzeurs / Metteurs en couleurs</p> <p>Table 6: measures and equivalences</p> <p> </p>
Inner Core Composition of the Moon and Ganymede revealed by Thermal Equation of State of Fe0.99C0.01 alloy
Open the record for dataset details and reuse information.
Hardness data from strain aging study of alloys 347H and IN-740H
<p>This data comes from a study on the effect of strain on the precipitation for two different alloys, stainless steel 347H and nickel base superalloy Inconel 740H. Each sample was welded, then they went through different levels of strain via cold rolling. For 347H the strain levels are 0 (not rolled) to 20 % strain. For IN-740H, the samples had a max strain of 10 %. After straining, the samples were then aged at two different temperatures for various times. The temperatures are 600 and 675°C for 347H and 700 and 750°C for IN-740H. The times range from 1 minute to 8,000 hours, but only 20, 50, 100, 500, and 2000 hours are shown here.</p> <p>This data comes from a microhardness test of the welded samples for all conditions. The hardness trace for all conditions goes from the fusion zone (part that melts and is resolidified), through the heat affected zone (the area where the microstructure and mechanical properties are affected by the heat), and into the unaffected base metal. The meta data comes from the title, hence why they're long and complicated.</p> <p>For 740H, there should be two hardness traces for each file. The first one is the full trace noted above, the second one is just in the fusion zone. For 347H, an additional base metal trace is the third trace. There are several different formats for the 347H trace (a,b,c, and z), but i won't get into it here.</p> <p>I'm currently working to condense these all down into one easy to use file (pickle format).</p>
Multicomponent alloys designed to sinter - dataset
<p>Accompanying dataset for the article "Multicomponent alloys designed to sinter"</p>
Thermophysical and kinetics properties up to 1100 °C of a selected Fe-C-O-Cr-Ni alloy by means of DTA, DSC measurements, and microstructural analysis
<p>Data from DTA, DSC, P-DSC. Heat capacity, enthalpy, austenite fractions.</p>
Experimental data used in the publication :" Investigation of the Effects of Various Severe Plastic Deformation Techniques on the Microstructure of Laser Powder Bed Fusion AlSi10Mg Alloy"
<p> </p> <p> </p>
Experimental data used in the article entitled "Influences of Energy Density on The Structure and Hardness of Selective Laser Melted AlSi7Mg Alloy"
Open the record for dataset details and reuse information.
Datased of Fe-based alloys
Open the record for dataset details and reuse information.
An Empirical Study Assessing Software Modeling in Alloy
<p>VM for the Formalise Artifact 2023</p>
A Library of High-Entropy-Alloy Nanocrystals with Controlled Surface Atomic Arrangements for Catalysis
<p>Input file of PtIrRuRhPd on Pd model based on SQS theory and Data of DFT calculations</p>
Partial liquid metal dealloying to synthesize nickel-containing porous and composite ferrous and high-entropy alloys
<p>Raw data for the graphs in the article.</p>
Chemical Looping Partial Oxidation of Methane: Reducing Carbon Deposition through Alloying
<p>Data that was used to generate Figures 1 and 2.</p>
Main data for the publication "Effects of heat treatments on the microstructure and localized corrosion behaviors of AA7075 aluminum alloy"
<p>This is a dataset of the main results of the article 'Effects of heat treatments on the microstructure and localized corrosion behaviors of AA7075 aluminum alloy'. The aim of this work is to investigate the effects of five different heat treatments on the microstructure and localized corrosion behaviors of AA7075 aluminum alloy. The dataset includes the chemical composition of the η-phase, calculated using JMatPro-v13.1 (as shown in Figure 8 of the article), data for generating the STEM results, and images of the SEM results.</p>
original data for "Operando Surface Optical Reflectance Microscopy Study of Corrosion Film Growth on a Ni-Cr-Mo Alloy During Anodic Polarization"
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.