Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
994
datasets available to search
ShareScore release 0.9.0
Dataset results
994 results for “2D”
PTB 2D GRAPPA Acquisitions of ACR Resolution Phantom
<p>ACR resolution phantom data acquired on the Siemens Verio 3T MR scanner using a FLASH sequence.<br> Three datasets were acquired with a fully sampled k-space, GRAPPA 2 and GRAPPA 4 acceleration.</p> <p>The data is available in ISMRMRD format.</p> <p> </p>
2D Ising model Monte Carlo configurations for the paper Entropy from Machine Learning
<p>Monte Carlo configurations for the 2D Ising model on a periodic 20x20 lattice used in the paper <em>Entropy from Machine Learning.</em></p> <p>Contains:</p> <ul> <li>20000 configurations for each temperature in the range T=1.0 to T=4.0 in 0.1 intervals</li> <li>40000 configurations at T=Tc</li> <li>README.md file with information about reading into Python</li> </ul> <p>See repository <a href="https://github.com/rmldj/ml-entropy">github.com/rmldj/ml-entropy.</a></p>
2D STORM dataset U2OS Nup96-SNAP A647
<p>2D STORM dataset</p> <p>sample: U2OS Nup96-SNAP cells labelled with A647</p> <p>imaging: STORM, COT buffer, pxlsize 106 nm</p> <p>Cells from: Thevathasan, J.V., Kahnwald, M., Cieśliński, K. <em>et al.</em> Nuclear pores as versatile reference standards for quantitative superresolution microscopy. <em>Nat Methods</em> <strong>16, </strong>1045–1053 (2019) doi:10.1038/s41592-019-0574-9</p>
2C 2D STORM dataset COS7, Tub/Tom20
<p>2C 2D STORM dataset</p> <p>sample: COS7 cells immunostained against alpha tubulin (A647) and Tom20 (DyLight755)</p> <p>imaging: STORM, COT buffer, pxlsize 106 nm</p>
2D STORM dataset U2OS Nup96-SNAP A647 (Au Fid)
<p>2D STORM dataset</p> <p>sample: U2OS Nup96-SNAP cells labelled with A647</p> <p>imaging: STORM, COT buffer, pxlsize 106 nm</p> <p>drift correction: Au fiducials 100 nm</p> <p>Cells from: Thevathasan, J.V., Kahnwald, M., Cieśliński, K. <em>et al.</em> Nuclear pores as versatile reference standards for quantitative superresolution microscopy. <em>Nat Methods</em> <strong>16, </strong>1045–1053 (2019) doi:10.1038/s41592-019-0574-9</p>
Characterization of extended defects in 2D materials using aperture-based dark-field STEM in SEM
<p>This is the raw data for the manuscript:</p> <p>Characterization of extended defects in 2D materials using aperture-based dark-field STEM in SEM</p> <p> </p> <p>A readme file containing all descriptions can be found in the main folder. </p> <p> </p> <p>Abstract:</p> <p>Quantitative diffraction contrast analysis with defined diffraction vectors is a wellestablished method in TEM for studying defects in crystalline materials. A comparable transmission techniques is however not available in the more widely used SEM platforms. In this work, we transfer the aperture-based dark-field imaging method from the TEM to the SEM, thus enabling quantitative diffraction contrast studies at lower voltages in SEM. This is achieved in STEM mode by inserting a custom-made aperture between the sample and the STEM detector and centering the hole on a desired reflection. To select individual reflections for dark-field imaging, we use our Low Energy Nanodiffraction (LEND) setup [Schweizer et al., Ultramicroscopy 213, 112956 (2020)], which captures transmission diffraction patterns from a fluorescent screen positioned below the sample. The aperture-based dark-field STEM method is particularly useful for studying extended defects in 2D materials, where (i) stronger diffraction at the lower voltages used in SEM is advantageous, but at the same time (ii) two-beam conditions cannot be established, making quantitative diffraction contrast analysis with standard bright-field and annular dark-field detectors impossible. We demonstrate the method by studying basal plane dislocations in bilayer graphene, which have attracted considerable research interest due to their exceptional structural and electronic properties. Direct comparison of results obtained on identical dislocations by the established TEM method and by the new aperture-based dark-field STEM method in SEM shows that a reliable Burgers vector analysis is possible by applying the wellknown g·b=0 invisibility criterion. We further use the LEND setup to acquire 4D-STEM data and show that the virtual dark-field images match well with those in aperturebased dark-field STEM images for reliable Burgers vector analysis.</p> <p> </p>
Simulation of a 2D pulsating laminar CH4/N2 flame
<p>This dataset contains the numerical simulation of a pulsating laminar CH4/N2 flame.<br>The flame is excited by modulating the inlet velocity at a frequency equal to 10 Hz (f10) and at a complex frequency obtained by combining frequencies at 10, 20 and 80 Hz (fcomplex) (see https://doi.org/10.1016/j.ijmecsci.2023.108219 for details).</p> <p>The dataset contains three files. In the "pod" files, the two simulations are organised as data matrices D of shape n times m where n is the number of computational cells (n_c) times the number of features (n_f) and m is the number of time steps. The matrix D is obtained by the concatenating along the rows n_f data matrices D_i of shape n_c times m:</p> <p>D = [D_1, ..., D_n_f]. </p> <p>For each simulation:<br>- n = 42668 (2 features and 21134 cells).<br>- the features are temperature and the mass fractions of OH.<br>- the temperature is in K.<br>- m = 516.<br>- the time step between the snapshots is 5e-4 s (the simulation goes from t=0 s to t=0.258 s).</p> <p>The "pca" file contains the data from both simulations and has shape (n_c*m) times n_f:<br>- n_f = 9 which are temperature and the species mass fraction of CH4, CO, CO2, H2, H2O, N2, O2, OH.<br>- m = 256. </p> <p>The file 'grid.vtu' contains the computational grid used to solve the CFD simulations. It can be opened using VTK-based software such as Paraview or Pyvista.</p> <p>The file 'example.py' is a python script that contains an example on how to load and visualise the dataset.</p>
Gummern - Horizontal (2D) vertical (1D) displacements from low cost GNSS
<h2>Abstract</h2> <p>Horizontal (2D) and vertical(1D) displacements, estimated for two locations in Gummern, AUT.</p> <p>This depository contains data generated within the European S34 project.</p> <h2>Metadata Information</h2> <table> <tbody> <tr> <td> <p><strong>Identification</strong></p> </td> </tr> <tr> <td> <p>Full Title</p> </td> <td> <p>Gummern (horizontal-2D and vertical-1D displacements)</p> </td> </tr> <tr> <td> <p>Abstract</p> </td> <td> <p>Horizontal (2D) and vertical(1D) displacements, estimated for two locations in Gummern, AUT.</p> </td> </tr> <tr> <td> <p>Keywords</p> </td> <td> <p>GNSS, displacements, coordinate time series</p> </td> </tr> <tr> <td> <p>Pilot area</p> </td> <td> <p>Gummern</p> </td> </tr> <tr> <td> <p>Associated resources</p> </td> <td> <p>/</p> </td> </tr> <tr> <td> <p>Language</p> </td> <td> <p>English</p> </td> </tr> <tr> <td> <p>URL</p> </td> <td> <p>/</p> </td> </tr> <tr> <td> <p>Categories</p> </td> <td> <p>GNSS</p> </td> </tr> <tr> <td> <p><strong>Temporal reference</strong></p> </td> </tr> <tr> <td> <p>Creation date (dd.mm.yyyy)</p> </td> <td> <p>14.06.2024</p> </td> </tr> <tr> <td> <p>Revision date (dd.mm.yyyy)</p> </td> <td> <p>14.06.2024</p> </td> </tr> <tr> <td> <p><strong>Quality and validity</strong></p> </td> </tr> <tr> <td> <p>Representation type</p> </td> <td> <p>Other</p> </td> </tr> <tr> <td> <p>Format</p> </td> <td> <p>Other</p> </td> </tr> <tr> <td> <p>Lineage</p> </td> <td> <p>/</p> </td> </tr> <tr> <td> <p>Spatial resolution</p> </td> <td> <p>None</p> </td> </tr> <tr> <td> <p>Positional accuracy</p> </td> <td> <p>5 mm</p> </td> </tr> <tr> <td> <p>Maintenance information</p> </td> <td> <p>/</p> </td> </tr> <tr> <td> <p>Coordinate system</p> </td> <td> <p>EPSG 4883</p> </td> </tr> <tr> <td> <p><strong>Constranits related to access and use</strong></p> </td> </tr> <tr> <td> <p>Use limitation</p> </td> <td> <p>/</p> </td> </tr> <tr> <td> <p>Access constraint</p> </td> <td> <p>/</p> </td> </tr> <tr> <td> <p>Public/Private</p> </td> <td> <p>Public</p> </td> </tr> <tr> <td> <p><strong>Responsible organisation</strong></p> </td> </tr> <tr> <td> <p>Responsible Contact</p> </td> <td> <p>Veton Hamza (<a href="mailto:veton.hamza@fgg.uni-lj.si">veton.hamza@fgg.uni-lj.si</a>)</p> <p>Polona Pavlovcic Preseren (<a href="mailto:polona.pavlovcic-preseren@fgg.uni-lj.si">polona.pavlovcic-preseren@fgg.uni-lj.si</a> )</p> </td> </tr> <tr> <td> <p>Responsible Party</p> </td> <td> <p>UL</p> </td> </tr> <tr> <td> <p><strong>Metadata on metadata</strong></p> </td> </tr> <tr> <td> <p>Contact</p> </td> <td> <p>Veton Hamza (<a href="mailto:veton.hamza@fgg.uni-lj.si">veton.hamza@fgg.uni-lj.si</a>)</p> <p>Polona Pavlovcic Preseren (<a href="mailto:polona.pavlovcic-preseren@fgg.uni-lj.si">polona.pavlovcic-preseren@fgg.uni-lj.si</a> )</p> </td> </tr> <tr> <td> <p>Metadata language</p> </td> <td> <p>English</p> </td> </tr> </tbody> </table>
Semantic2D: A Semantic Dataset for 2D Lidar Semantic Segmentation: Dataset
<p>The 2D lidar semantic segmentation datasets for the paper titled "Semantic2D: A Semantic Dataset for 2D Lidar Semantic Segmentation" by Zhanteng Xie and Philip Dames.</p> <p>The relevant code is available at: https://github.com/TempleRAIL/semantic2d</p> <p> </p>
2D Electrial Impedance Tomography - Porcine model of Acute Lung Injury - PEEP trial
<p>This is an Electrical Impedance Tomography (EIT) dataset of a porcine model of acute lung injury (ALI), performing positive end-expiratory pressure (PEEP) trials in order to find 'optimal' PEEP.</p> <p>The data constist of 8 pigs with 2 measurements each, once before ALI and once after ALI induciton.</p> <p>Data is present as the *.bin format exported from Dräger Pulmovista V500 software. It can be read and analysed using the ALIVE eitprocessing software. </p>
Dataset for 2D Rhenium- and Niobium-Doped WSe2 Photoactive Cathodes in Photo-Enhanced Hybrid Zn-Ion Capacitors
<p>The dataset contains all relevant data and figures regarding the manuscript "2D Rhenium- and Niobium-Doped WSe2 Photoactive Cathodes in Photo-Enhanced Hybrid Zn-Ion Capacitors".</p> <p>All Figures are in tiff format and all relevant data are in csv formats. </p> <p>The data in csv format are labelled as specified in the corresping images (e.g. Figure 1a csv file corresponds to data used to plot graphs from Figure 1a etc.). </p> <p>Axis labeling and units are always specified at the beginning of individual columns. If more than one curve was plotted from the csv file, the conditions can also be found at the beginning of corresponding columns.</p>
Dataset for Next-Generation Self-Powered Photodetectors using 2D Bismuth Oxide Selenide Crystals
<p>The dataset contains relevant data and figures regarding the manuscript "Next-Generation Self-Powered Photodetectors using 2D Bismuth Oxide Selenide Crystals".</p> <p>All Figures are in jpg/tiff format and all relevant data are in csv formats. </p> <p>The data in csv format are labelled as specified in the corresping images (e.g. Figure 1a csv file corresponds to data used to plot graphs from Figure 1a etc.). </p> <p>Axis labeling and units are always specified at the beginning of individual columns. If more than one curve was plotted from the csv file, the conditions can also be found at the beginning of corresponding columns.</p>
Data for "2D Nitrogen-Doped Graphene Materials for Noble Gas Separation"
<p>Datasets for the figures used in a manuscript accepted in Small Journal (10.1002/smll.202408525)</p> <p>Full author list:</p> <p>Veronika Šedajová#, Min-Bum Kim#, Rostislav Langer, Gobbilla Sai Kumar, Lili Liu, Zdeněk Baďura, James V. Haag, Giorgio Zoppellaro, Radek Zbořil, Praveen K Thallapally*, Kolleboyina Jayaramulu*, Michal Otyepka*</p> <p>Title: 2D Nitrogen-Doped Graphene Materials for Noble Gas Separation</p> <p>Affiliations:</p> <p>Dr. V. Šedajová, Dr. Z. Baďura, Dr. G. Zoppellaro, Prof. R. Zbořil, Prof. K. Jayaramulu and Prof. M. Otyepka<br>Regional Centre of Advanced Technologies and Materials, Czech Advanced Technology and Research Institute (CATRIN), Palacký University Olomouc, Šlechtitelů 27, 783 71, Olomouc, Czech Republic.<br>Email: michal.otyepka@upol.cz <br>Email: jayaramulu.kolleboyina@iitjammu.ac.in</p> <p>Dr. MB. Kim, Dr. Lili Liu, Dr. J.V. Haag, Prof. P. K Thallapally<br>Energy and Environmental Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States<br>Email: Praveen.Thallaplly@pnnl.gov</p> <p>Prof. K. Jayaramulu, Dr. G.S. Kumar<br>Hybrid Porous Materials Laboratory, Department of Chemistry, Indian Institute of Technology Jammu, Jammu and Kashmir 181221, India</p> <p>Dr. Z. Baďura, Dr. G. Zoppellaro, Prof. R. Zbořil<br>Nanotechnology Centre, CEET, VŠB-Technical University of Ostrava, 17. listopadu 2172/15, Ostrava-Poruba 708 00, Czech Republic.</p> <p>Prof. M. Otyepka, Dr. R. Langer<br>IT4Innovations, VŠB–Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic</p>
2D visco-elasto-plastic subduction models in the presence of a high density and viscosity continental block
<p>Three main models with different rheological conditions and density are incorporated for an imposed intrusion between the upper and lower continental crust. Output files for a model with a crust without intrusions are also incorporated.</p> <p>The file contains data on the conditions of plate motion velocity, plate age, plate thickness in Excel (Input_Data_Age_Vel.xlsx), a table with the rheology used to reproduce different numerical models incorporating the intrusion (Table_S3.pdf), and a file High_density_materials.m showing the construction of the intrusion within the continental crust.</p> <p>High_density_materials.m m should be imposed on the original I2ELVIS code provided by Taras Gerya - ETH Zürich, Institut für Geophysik, Switzerland - email: taras.gerya@erdw.ethz.ch</p> <p>The file has the main time steps as a function of temperature, viscosity, density and rock composition into the folders. If you want to visualize them please run the following Script PLOT_OUTPUT_DATA.m where,</p> <p>str=string(2040), represent the time_step</p> <p>Files are organized in a matrix form, each folder has the</p> <p>grid_x :coordinate matrix, <br>gridy_: coordinate matrix, </p> <p>matrix_temperature_, density and viscosity.</p> <p>To plot the Rock composition.</p> <p>mx and my, tracer coordinates in x-direction and y-direction<br>matrix_markcom is matrix tracers.</p> <p> </p> <p>Model 1</p> <p>(Time step= 10= 14.99 Ma, 120= 14 Ma, 310= 12 Ma, 670 = 9 Ma, 1120 = 6 Ma, 1620 = 3 Ma, 2040 = 0 Ma)</p> <p> </p> <p>The temperature, viscosity, density, and rock composition for the PHS slab are shown in this animation for Model 1. <br>This model is reproduced under the conditions of plate motion velocity and age from Figure 3 with an initial dip angle for the weak zone of 20°. <br>The high density material between the upper and lower crust in the vicinity of the slab is not included in Model 1. <br>The model evolves over a period of the last 15 Myr and shows a shallow subduction. </p> <p><br>Model 2</p> <p>(Time step= 10= 14.99 Ma, 120= 14 Ma, 380= 12 Ma, 850 = 9 Ma, 1490 = 6 Ma, 2090 = 3 Ma, 2540 = 0 Ma)</p> <p>With high density block<br>The temperature, viscosity, density, and rock composition for the PHS slab are shown in this animation for Model 2. This model is reproduced under the conditions of plate motion velocity and age from Figure 3 with an initial dip angle for the weak zone of 20°. The high density material between the upper and lower crust in the vicinity of the slab is included in Model 2. The model evolves over a period of the last 15 Myr and shows a steep subduction.</p> <p><br>Model 3</p> <p>(Time step= 10= 14.99 Ma, 120= 14 Ma, 310= 12 Ma, 670 = 9 Ma, 1120 = 6 Ma, 1690 = 3 Ma, 2040 = 0 Ma)</p> <p>Without high density block and high viscosity</p> <p>The temperature, viscosity, density, and rock composition for the PHS slab are shown in this animation for Model 3. This model is reproduced under the conditions of plate motion velocity and age from Figure 3 with an initial dip angle for the weak zone of 20°. The initial high viscosity material and without high density between the upper and lower crust in the vicinity of the slab is included in Model 3. The model evolves over a period of the last 15 Myr and shows subduction with a high dip angle. </p> <p><br>Model4</p> <p>(Time step= 10= 14.99 Ma, 120= 14 Ma, 330= 12 Ma, 770 = 9 Ma, 1190 = 6 Ma, 1640 = 3 Ma, 2040 = 0 Ma)<br> <br>With high density block and high viscosity<br>The temperature, viscosity, density, and rock composition for the PHS slab are shown in this animation for Model 4. This model is reproduced under the conditions of plate motion velocity and age from Figure 3 with an initial dip angle for the weak zone of 20°. The high density and high viscosity material between the upper and lower crust in the vicinity of the slab is included in Model 4. The model evolves over a period of the last 15 Myr and shows a steep subduction</p>
Imaging thermocline microstructure in 2D with swaths traced by wave-pumped χpods: dataset and code
<p><a href="https://doi.org/10.1029/2024JC022134">Associated paper</a> published in <em>J. Geophys. Res. Oceans</em></p> <h2>Dataset summary</h2> <p>Location: 0°N, 140°W<br>Depth: 120 m<br>Period: 16-Sep-2014 to 19-Oct-2015</p> <p>This data archive contains two types of data files:<br>data_yymmdd.mat<br>grid_yymmdd.mat<br>Each file contains 24 hours of data. There are 394 of each type.</p> <p>Arrays in data_yymmdd.mat are single precision (except the 'time' array) to keep file sizes small.</p> <h2>Contents of the data files</h2> <p>Each Matlab file contains a single struct. These structs include readmes, which are reproduced in the full PDF readme (chipod_swaths_readme.pdf).</p> <p>Files are grouped into months and zipped (yymm.zip) to ease downloading.</p> <h2>Reading the data file with Python</h2> <p>Example code to read the files into Python as dictionaries is given in the full PDF readme (chipod_swaths_readme.pdf).</p> <h2>Matlab code to produce the processed data</h2> <p>The code to read in raw chipod data and process them is primarily contained in the file 'swaths_paper_data_preparation.m'. This file calls three other files ('raw_load_chipod.m', 'deglitch.m', and 'bin.m'). All of these files are provided for completeness, but we are only archiving the processed outputs (not the raw voltage signals). Please email if more information is needed.</p> <h2>Matlab code for the convolutional neural network</h2> <p>See 'chipod_swaths_convolutional_neural_network.m'.</p>
Retrieving 2D laterally varying structures from multi-station surface wave dispersion curves using multiscale window analysis
<p>Here are the waveform data used in the Geophysical Journal International paper entitled "Retrieving 2D laterally varying structures from multi-station surface wave dispersion curves using multiscale window analysis". The dataset is used for the reader who wants to reproduce the result in the paper.</p>
Segmenting cells in a spheroid in 3D using 2D StarDist within TrackMate
<p>3D image of cells in a spheroid, imaged on a confocal microscope, used in a tutorial to demonstrate how to hack TrackMate to segment cells in 3D using the 2D segmentation algorithms it ships.</p> <p>Image by Guillaume Jacquemet.</p> <p>For more details see https://imagej.net/plugins/trackmate/trackmate-stardist#generation-of-3d-labels-by-tracking-2d-labels-using-trackmate</p> <p> </p>
nPSize VSL images as 2D arrays
<p>VSL.zip are 2D arrays, to be extracted in the following directory: /dataset/images/VSL to build /dataset/images/VSL/[VSL_images.h5] Note: h5 is a compressed format, to uncompress.</p>
nPSize BAM images as 2D arrays
<p>BAM1.zip BAM2.zip BAM3.zip are 2D arrays, to be extracted in the following directory: /dataset/images/BAM to build /dataset/images/BAM/[BAM_images.h5] Note: h5 is a compressed format, to uncompress.</p>
nPSize CEA images as 2D arrays
<p>CEA1.zip CEA2.zip CEA3.zip CEA4.zip CEA5.zip CEA6.zip CEA7.zip CEA8.zip CEA9.zip are 2D arrays, to be extracted in the following directory: /dataset/images/CEAto build /dataset/images/CEA[CEA_images.h5] Note: h5 is a compressed format, to uncompress.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.