Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
509
datasets available to search
ShareScore release 0.9.0
Dataset results
509 results for “Version 2”
SMEX02 European Remote Sensing Satellite (ERS-2) AMI Data, Iowa, Version 1
This data set consists of browse images acquired by the C-band Active Microwave Instrument (AMI) onboard the European Remote Sensing Satellite 2 (ERS-2) and provides only a general quality assessment of the ERS-2 AMI data.
VEMAP 2: U.S. Monthly Climate Change Scenarios, Version 2
The Vegetation/Ecosystem Modeling and Analysis Project (VEMAP) Phase 2 has developed a number of transient climate change scenarios based on coupled atmosphere-ocean general circulation model (AOGCM) transient climate experiments. The purpose of these scenarios is to reflect time-dependent changes in surface climate from AOGCMs in terms of both (1) long-term trends and (2) changes in multiyear (3-5 yr) to decadal variability patterns, such as El Nino/Southern Oscillation(ENSO). Development of the data set is reported in Kittel et al. (1997). Scenarios have been derived from transient greenhouse gas experiments with sulfate aerosols from the Canadian Climate Center (CCC) and the Hadley Centre (HADCM2; Mitchell et al. 1995, Johns et al. 1997) accessed via the Climate Impacts LINK Project, Climatic Research Unit, University of East Anglia. Scenarios were developed for the following variables: total incident solar radiation, minimum and maximum temperature, vapor pressure, precipitation, relative humidity and mean monthly irradiance for the time periods January 1994 to approximately 2100. These data and the VEMAP 1 data (Kittel et al. 1995) were used to drive models in VEMAP Phase 2, the objectives of which are to compare time-dependent ecological responses of biogeochemical and coupled biogeochemical-biogeographical models to historical and projected transient forcings across the conterminous U.S. This data set of monthly climate change scenarios was designed to be concatenated with the /VEMAP/vemap.html">VEMAP 2: U.S. Monthly Climate, 1895-1993, Version 2 data set to create a single climate series from 1895 - ~2100. This data set is being made available for the U.S. National Assessment. Users are requested to confer with the NCAR VEMAP Data Group to ensure that the intended application of the data set is consistent with the generation and limitations of the data. For more information, refer to the VEMAP homepage. Data Citation The data set should be cited as follows: Kittel, T. G. F., N. A. Rosenbloom, C. Kaufman, J. A. Royle, C. Daly, H. H. Fisher, W. P. Gibson, S. Aulenbach, D. N. Yates, R. McKeown, D. S. Schimel, and VEMAP 2 Participants. 2000. VEMAP 2: U. S. Monthly Climate Change Scenarios, Version 2. Available on-line from Oak Ridge National Laboratory Distributed Active Archive Center, Oak Ridge, Tennessee, U.S.A.
MetOp-B ASCAT ESDR Level 2 Ancillary Ocean Surface Fields Version 1.1
This dataset contains model output interpolated in space and time to observations from the MetOp-B ASCAT (ASCAT-B) instrument (a satellite-based scatterometer), representing the first science quality release of these data (post-provisional after v1.0) funded under the MEaAUREs program. These auxiliary fields are included to complement those scatterometer observations, specifically for the ASCATB_ESDR_L2_WIND_STRESS_V1.1 dataset. Model variables include: i) ocean surface wind fields from ERA-5 short-term forecast (removed from the analyses times to reduce impacts from assimilated scatterometer retrievals at the beginning of the forecast); ii) estimations of precipitation from the GPM IMERG product; iii) estimation of the surface currents from the GlobCurrent project. The fields are provided on a non-uniform grid within the sampled locations of the ASCAT-B Level 2 product, and at a nominal 12.5 km pixel resolution. Each file corresponds to a specific orbital revolution number, which begins at the southernmost point of the ascending orbit. The thumbnail shows data for two orbits - using all orbits for a single day will provide global coverage.<br><br>The dataset represents the first science quality release of this product with funding from the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. Version 1.1 provides a set of updates and improvements from version 1.0, including: 1) cleaned up ancillary data points in between the left/right swaths for improved collocation with available satellite data, 2) improved variable metadata, 3) removed the GlobCurrent stokes drift variables, and 4) provided data source metadata including DOIs for the ERA-5, IMERGE, and GlobCurrent data sources. The primary purpose of this Version 1.1 release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST).
SWOT Level 2 Nadir Altimeter Geophysical Data Record with Waveforms - GDR Version D
The SWOT Level 2 Nadir Altimeter Geophysical Data Record (GDR) with Waveforms dataset produced by the Surface Water and Ocean Topography (SWOT) mission provides sea surface height, significant wave height and wind speed measurements from the Poseidon-3C nadir altimeter, a Jason-class dual frequency (Ku/C) altimeter. SWOT is a joint mission between NASA and CNES that launched on December 16, 2022. It aims to measure ocean surface topography with unprecedented resolution and accuracy, as well as map inland water bodies globally. The GDR dataset consists of discrete measurements for each half orbit along the ground track with sampling resolutions of approximately 6-km and 300-m at 1Hz and 20Hz, respectively. The data were processed using restituted auxiliary data and the Precise Orbit Ephemeris (POE). The data are available with latency of < 90 days and distributed in netCDF-4 file format.<br>This collection is a sub-collection of its parent: https://podaac.jpl.nasa.gov/dataset/SWOT_L2_NALT_GDR_D
Delta-X: In Situ Water Quality Indicators across MRD, LA, USA, 2021, Version 2
This dataset provides in situ measurements of water temperature (degrees C), salinity (PSU), turbidity (FNU), and chlorophyll-a fluorescence (RFU) in surface of the Atchafalaya River and Terrebonne Basins during the Spring (2021-03-25 to 2021-04-22) and Fall (2021-08-14 to 2021-09-24) field efforts by the Delta-X project. Field sampling was paused on August 25 and resumed on September 13, 2021, due to the landfall of Hurricane Ida on 2021-08-26 approximately 70 km east of the study site. Water quality changes caused by the hurricane were expected to be minimal. Measurements were collected in multiple channels of varying width (from a few meters to >100 m), near Delta-X intensive study sites, in open bays and lakes, and at a few locations in the nearshore Gulf of Mexico using either a YSI ProDSS water quality probe or a YSI EXO3 water quality probe.
SWOT Level 2 Water Mask Pixel Cloud Data Product, Version D
The SWOT Level 2 Water Mask Pixel Cloud Product (SWOT_L2_HR_PIXC_D) provides high-resolution, geolocated observations of terrestrial surface water pixels detected by the Ka-band Radar Interferometer (KaRIn) onboard the Surface Water and Ocean Topography (SWOT) satellite. This product contains the foundational “pixel cloud” data from which hydrologic features such as rivers, lakes, floodplains, and wetlands are later identified and analyzed in higher-level products.The PIXC product provides the unstructured point cloud of water detections at full instrument resolution (~15–25 m cross-track, ~5–10 m along-track), supporting fine-scale hydrologic analyses and applications such as water body delineation, flood mapping, and change detection. Each granule represents one KaRIn high-rate tile (~64 × 64 km²), corresponding to either the left or right half of the instrument swath. It includes individual water pixel detections with associated geodetic coordinates, ellipsoidal heights, normalized radar backscatter, and classification flags indicating surface type (e.g., land, water, ice, or layover). Pixel heights are referenced to the WGS84 ellipsoid and are not corrected for solid Earth tides, ocean tides, or pole tides like KaRIn low-rate oceanography products. Users may apply additional processing or corrections depending on the intended scientific use. Data are distributed in NetCDF-4 format and follow Climate and Forecast (CF) metadata conventions.The PIXC product is complemented by an auxiliary pixel cloud product (PIXCVec) that provides a less noisy, height-constrained geolocation of the observed water pixels and identifies associated river and lake features in the SWOT Prior River & Lake Databases (PRD & PLD). Together they support the derivation of higher-level, featured based River and Lake hydrology products from SWOT.
GHRSST Level 2P Global Subskin Sea Surface Temperature version 8.2 (v8.2) from the Advanced Microwave Scanning Radiometer 2 (AMSR2) by REMSS
This product provides a “Final” (Refined) Level-2 Sea Surface Temperature (SST) (currently identified by "v8.2" within the file name) for the Group for High Resolution Sea Surface Temperature (GHRSST) Project, which is derived from the Advanced Microwave Scanning Radiometer 2 (AMSR2) by Remote Sensing Systems (RSS, or REMSS). AMSR2 was launched on 18 May 2012, onboard the Global Change Observation Mission - Water (GCOM-W) satellite developed by the Japan Aerospace Exploration Agency (JAXA). The GCOM-W mission aims to establish the global and long-term observation system to collect data, which is needed to understand mechanisms of climate and water cycle variations, and demonstrate its utilization. AMSR2 onboard the first generation of the GCOM-W satellite will continue Aqua/AMSR-E observations of water vapor, cloud liquid water, precipitation, SST, sea surface wind speed, sea ice concentration, snow depth, and soil moisture. AMSR2 is a remote sensing instrument for measuring weak microwave emission from the surface and the atmosphere of the Earth. The antenna of AMSR2 rotates once per 1.5 seconds and obtains data over a 1450 km swath. This conical scan mechanism enables AMSR2 to acquire a set of daytime and nighttime data with more than 99% coverage of the Earth every 2 days. The “Final” SSTs are processed when RSS receives the atmospheric model National Center for Environmental Prediction (NCEP) Final Analysis (FNL) Operational Global Analysis. The NCEP wind directions are particularly useful for retrieving more accurate SSTs and wind speeds. The v8.2 supersedes the previous v8a dataset which can be found at https://www.doi.org/10.5067/GHAM2-2PR8A.
ATom: L2 Trace Gas and Isotope Measurements from Medusa Whole Air Sampler, Version 2
This dataset provides O2/N2, CO2, Ar/N2, and stable isotope ratios of CO2 measured in flasks collected by the Medusa Whole Air Sampler during airborne campaigns conducted by NASA's Atmospheric Tomography (ATom) mission. ATom deployed an extensive gas and aerosol payload on the NASA DC-8 aircraft for a systematic, global-scale sampling of the atmosphere, profiling continuously from 0.2 to 12 km altitude. Flights occurred in each of 4 seasons from 2016 to 2018. Medusa collected 32 cryogenically dried, flow, and pressure-controlled samples per flight. The samples are collected by an automated sampler into 1.5 L glass flasks that integrate over 25 seconds. Medusa provides discretely-sampled comparisons for onboard in situ O2/N2 ratio and CO2 measurements and unique measurements of Ar/N2 and 13C, 14C, and 18O isotopologues of CO2. Medusa flasks are analyzed on a sector-magnet mass spectrometer and a LiCor non-dispersive infrared CO2 analyzer by the Scripps O2 Program at Scripps Institution of Oceanography.
EASE-Grid 2.0 Land Cover Classifications Derived from Boston University MODIS/Terra Land Cover Data, Version 1
These data provide land cover classifications derived from the Boston University MOD12Q1 V004 MODIS/Terra 1 km Land Cover Product (Friedl et al. 2002). The data are available in various EASE-Grid 2.0 azimuthal and global projections, in multiple spatial resolutions ranging from 3 km to 100 km. The data are in flat binary, 1 byte files that are stored by row.
GHRSST Level 2P Central Pacific Regional Skin Sea Surface Temperature from the Geostationary Operational Environmental Satellites (GOES) Imager on the GOES-15 satellite (GDS version 2)
The Geostationary Operational Environmental Satellites (GOES) operated by the United States National Oceanic and Atmospheric Administration (NOAA) support weather forecasting, severe storm tracking, meteorology and oceanography research. Generally there are several GOES satellites in geosynchronous orbit at any one time viewing different earth locations including the GOES-15 launched 4 March 2010. The radiometer aboard the satellite, The GOES N-P Imager, is a five channel (one visible, four infrared) imaging radiometer designed to sense radiant and solar reflected energy from sampled areas of the earth. The multi-element spectral channels simultaneously sweep east-west and west-east along a north-to-south path by means of a two-axis mirror scan system retuning telemetry in 10-bit precision. For this Group for High Resolution Sea Surface Temperature (GHRSST) dataset, skin sea surface temperature (SST) measurements are calculated from the far IR channels of GOES-15 at full resolution on a half hourly basis. In native satellite projection, vertically adjacent pixels are averaged and read out at every pixel. L2P datasets including Single Sensor Error Statistics (SSES) are then derived following the GHRSST Data Processing Specification (GDS) version 2.0. The full disk image is subsetted into granules representing distinct northern and southern regions.
GEO/LEO based cloud property composites for DSCOVR EPIC view, Version 2
In DSCOVR_EPIC_L2_composite_02, cloud property retrievals from multiple imagers on low Earth orbit (LEO) satellites (including MODIS, VIIRS, and AVHRR) and geostationary (GEO) satellites (including GOES-13 and -15, METEOSAT-7 and -10, MTSAT-2, and Himawari-8) are used to generate the composite. Based on the CERES cloud detection and retrieval system, all cloud properties were determined using a standard set of algorithms, the Satellite ClOud and Radiation Property Retrieval System (SatCORPS). Cloud properties from these LEO/GEO imagers are optimally merged to provide a seamless global composite product at 5-km resolution by using an aggregated rating that considers five parameters (nominal satellite resolution, pixel time relative to the EPIC observation time, viewing zenith angle, distance from day/night terminator, and sun glint factor) and selects the best observation at the time nearest to the EPIC measurements. About 72% of the LEO/GEO satellite overpass times are within one hour of the EPIC measurements, while 92% are within two hours of the EPIC measurements. The global composite data are then remapped into the EPIC FOV by convolving the high-resolution cloud properties with the EPIC point spread function (PSF) defined with a half-pixel accuracy to produce the EPIC composite. PSF-weighted radiances and cloud properties averages are computed separately for each cloud phase. Ancillary data (i.e., surface type, snow and ice map, skin temperature, precipitable water, etc.) needed for anisotropic factor selections are also included in the composite. These composite images are produced for each observation time of the EPIC instrument (typically 300 to 600 composites per month).
ICESat-2 Pre-Launch Simulated Multiple Altimeter Beam Experimental Lidar Advanced Topographic Laser Altimeter System (MATLAS) Data, Version 2
Multiple Altimeter Beam Experimental Lidar (MABEL) Advanced Topographic Laser Altimeter System (MATLAS) simulates the expected performance of the ICESat-2 ATLAS instrument. The data are produced from MABEL data by adjusting the detected number of signal and noise photons to that predicted using ATLAS instrument model design cases. Each data file consists of approximately 1 minute of HDF5-derived MABEL data.
GHRSST Level 4 DMI_OI Global Foundation Sea Surface Temperature Analysis (GDS version 2)
A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature analysis produced daily on an operational basis by the Danish Meteorological Institute (DMI) using an optimal interpolation (OI) approach on a global 0.05 degree grid. The analysis is based upon nighttime GHRSST L2P skin and subskin SST observations from several satellites. The sensors include the Advanced Very High Resolution Radiometer (AVHRR), the Spinning Enhanced Visible and Infrared Imager (SEVIRI), the Advanced Microwave Scanning Radiometer 2 (AMSR2), the Visible Infrared Imager Radiometer Suite (VIIRS), and the Moderate Resolution Imaging Spectroradiometer (MODIS) on Aqua. An ice field from the EUMETSAT OSI-SAF is used to mask out areas with ice. This dataset adheres to the version 2 GHRSST Data Processing Specification (GDS).
GEDI L4A Footprint Level Aboveground Biomass Density, Version 2.1
This dataset contains Global Ecosystem Dynamics Investigation (GEDI) Level 4A (L4A) Version 2 predictions of the aboveground biomass density (AGBD; in Mg/ha) and estimates of the prediction standard error within each sampled geolocated laser footprint. In this version, the granules are in sub-orbits. The algorithm setting group selection used for GEDI02_A Version 2 has been modified for Evergreen Broadleaf Trees in South America to reduce false positive errors resulting from the selection of waveform modes above ground elevation as the lowest mode. The footprints are located within the global latitude band observed by the International Space Station (ISS), nominally 51.6 degrees N and S and reported for the period 2019-04-18 to 2024-11-27. No acquisitions occurred while the GEDI instrument was in storage on the International Space Station (ISS) from March 2023 to April 2024. The GEDI instrument consists of three lasers producing a total of eight beam ground transects, which instantaneously sample eight ~25 m footprints spaced approximately every 60 m along-track. The GEDI beam transects are spaced approximately 600 m apart on the Earth's surface in the cross-track direction, for an across-track width of ~4.2 km. Footprint AGBD was derived from parametric models that relate simulated GEDI Level 2A (L2A) waveform relative height (RH) metrics to field plot estimates of AGBD. Height metrics from simulated waveforms associated with field estimates of AGBD from multiple regions and plant functional types (PFTs) were compiled to generate a calibration dataset for models representing the combinations of world regions and PFTs (i.e., deciduous broadleaf trees, evergreen broadleaf trees, evergreen needleleaf trees, deciduous needleleaf trees, and the combination of grasslands, shrubs, and woodlands). For each of the eight beams, additional data are reported with the AGBD estimates, including the associated uncertainty metrics, quality flags, model inputs, and other information about the GEDI L2A waveform for this selected algorithm setting group. Model inputs include the scaled and transformed GEDI L2A RH metrics, footprint geolocation variables and land cover input data including PFTs and the world region identifiers. Additional model outputs include the AGBD predictions for each of the six GEDI L2A algorithm setting groups with AGBD in natural and transformed units and associated prediction uncertainty for each GEDI L2A algorithm setting group. Providing these ancillary data products will allow users to evaluate and select alternative algorithm setting groups. Also provided are outputs of parameters and variables from the L4A models used to generate AGBD predictions that are required as input to the GEDI04_B algorithm to generate 1-km gridded products.
Global Space-based Stratospheric Aerosol Climatology Version 2.22
The Global Space-based Stratospheric Aerosol Climatology, or GloSSAC, is a 44-year climatology of stratospheric aerosol properties focused on extinction coefficient measurements by the Stratospheric Aerosol and Gas Experiment (SAGE) series of instruments through mid-2005 and later from mid-2017 and on the Optical Spectrograph and InfraRed Imager System (OSIRIS) and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) data thereafter. Data from other space instruments and from ground-based, air and balloon borne instruments to fill in key gaps in the data set. The end result is a global and gap-free data set focused on aerosol extinction coefficient at 525 and 1020 nm and other parameters on an ‘as available’ basis.
ATom: L2 Measurements from NOAA ToF Chemical Ionization Mass Spectrometer, Version 2
This dataset provides the mixing ratios of reactive nitrogen and halogen species measured by the NOAA Iodide Ion Time-of-Flight Chemical Ionization Mass Spectrometer (NOAA CIMS) during airborne campaigns conducted by NASA's Atmospheric Tomography (ATom) mission for ATom-3 and ATom-4 campaigns. The NOAA CIMS uses chemical ionization mass spectrometric detection of gas phase organic and inorganic analytes via I- adduct formation. Measurements for ATom include N2O5 (dinitrogen pentoxide), ClNO2 (chloro nitrite), Cl2 (Chlorine), HCOOH (formic acid), C2H4O3S (hydroperoxymethyl thioformate), BrCl (bromine monochloride), BrCN (cyanogen bromide), and BrO (bromine monoxide). ATom deploys an extensive gas and aerosol payload on the NASA DC-8 aircraft for systematic, global-scale sampling of the atmosphere, profiling continuously from 0.2-13 km altitude. This comprehensive dataset will be used to improve the representation of chemically reactive gases and short-lived climate forcers in global models of atmospheric chemistry and climate.
CLPX-Ground: ISA Snow Depth Transects and Related Measurements, Version 2
This data set consists of snow depth data from nine study areas, within three larger-scale areas in northern Colorado (Fraser, North Park, and Rabbit Ears Meso-cell Study Areas (MSAs)). The study areas range from low-relief (flat topography) unforested areas with shallow snow covers, to high-relief (complex topography) densely forested areas with deep snow covers.
SWOT Simulated Level 2 North America Continent KaRIn High Rate Pixel Cloud Vector Attribute Product Version 1.0
This dataset provides a simulated water surface elevation product that resembles the Ka-band Interferometer (KaRIn) measurements by the Surface Water and Ocean Topography (SWOT) mission. SWOT will provide a global coverage but this simulated subset focuses on the North America continent. The simulated SWOT KaRIN swaths span 128 km in the cross-swath direction with a 20-km nadir gap. This product is complementary to the L2_HR_PIXC_V1 product. It provides a less noisy, height-constrained geolocation (latitude, longitude, and height) of the L2_HR_PIXC_V1 pixels. In addition, this product provides an identifier associated with each pixel. The identifier contains the information of the river and/or lake features pulled from the Prior River Database (PRD) or in the Prior Lake Database (PLD). Note that this is a simulated SWOT product and not suited for any scientific exploration.
GHRSST Level 4 REMO_OI_SST_5km Regional Foundation Sea Surface Temperature Analysis (GDS version 2)
A Group for High Resolution Sea Surface Temperature (GHRSST) Level 4 sea surface temperature (SST) analysis produced daily on an operational basis by the Oceanographic Modeling and Observation Network (REMO) at Applied Meteorology Laboratory/Federal University of Rio de Janeiro (LMA/UFRJ) using the Barnes sub optimal interpolation (OI) technique on a regional 0.05 degree grid. REMO uses Advanced Very High Resolution Radiometer (AVHRR) data from National Oceanic and Atmospheric Administration (NOAA) satellites series (NOAA 15, NOAA 16, NOAA 17, NOAA 18 and NOAA 19) and Microwave Imager (TMI) data from Tropical Rainfall Measuring Mission (TRMM) which is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA) to generate 0.05 degree daily cloud free blended (infrared and microwave) SST products (approximately 5.5 km). The data lies between latitudes 45 S and 15 N and longitudes 70 W and 15 W region and are fully validated by in situ measurements from eleven buoys of Prediction and Research Moored Array in the Tropical Atlantic (PIRATA).AVHRR is a scanning radiometer capable of detecting energy from land, ocean and atmosphere. It operates with six spectral bands arranged in the regions of visible and infrared region. TRMM was launched in December, 1997, having an orbital inclination of 53 degree and altitude 350 km, an equatorial orbit that ranges from 40 N to 40 S and a spatial resolution of 0.25 degree (∼27.75 km). Although infrared AVHRR SST data have high spatial resolution, they are contaminated by cloud cover and aerosols, while lower resolution microvwave TMI data are barely influenced by these.
EASE-Grid 2.0 Land-Ocean-Coastline-Ice Masks Derived from Boston University MODIS/Terra Land Cover Data, Version 1
These Land-Ocean-Coastline-Ice (LOCI) files provide land classification masks derived from the Boston University MOD12Q1 V004 MODIS/Terra 1 km Land Cover Product (Friedl et al. 2002). The masks are available in various EASE-Grid 2.0 azimuthal and global projections, at various spatial resolutions ranging from 3 km to 100 km. The masks are in flat binary, 1 byte files stored by row. Quick-look browse images of the masks are also available in PNG (.png) format.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.