Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

3,018

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

3,018 results for “aire”

Learn how ShareScore rates datasets ↗
nasa24/100

AIRS/Aqua L2 CO2 in the free troposphere (AIRS-only) V005 (AIRS2STC) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS Carbon Dioxide (CO2) Standard Retrieval Product consists of retrieved estimates of CO2, plus estimates of the errors associated with the retrieval. In contrast to AIRX2RET, the horizontal resolution of this standard product is about 110 km (1x1 degree). An AIRS granule has been set as 6 minutes of data, 15 footprints cross track by 22 lines along track.

restrictednotspecifiedApr 2025View details →
nasa24/100

Ocean Surface pCO2 and Air-Sea CO2 Flux in the Northern Gulf of Mexico, 2006-2010

This dataset provides 1 km gridded monthly estimates of surface ocean partial pressure of CO2 (pCO2) and air-sea flux of CO2 (CO2 flux) for the northern Gulf of Mexico for the period 2006 through 2010. Estimates of pCO2 were derived from MODIS/Aqua satellite imagery in combination with ship-based observations. Estimates of CO2 flux were derived from estimates of seawater pCO2, wind fields, and atmospheric pCO2.

restrictednotspecifiedApr 2025View details →
nasa24/100

FIREX-AQ ER-2 Remotely Sensed GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS)

FIREXAQ_TraceGas_AircraftRemoteSensing_ER2_GCAS_Data are remotely sensed data collected by the GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS) onboard the ER-2 aircraft during FIREX-AQ. Completed during summer 2019, FIREX-AQ utilized a combination of instrumented airplanes, satellites, and ground-based instrumentation. Detailed fire plume sampling was carried out by the NASA DC-8 aircraft, which had a comprehensive instrument payload capable of measuring over 200 trace gas species, as well as aerosol microphysical, optical, and chemical properties. The DC-8 aircraft completed 23 science flights, including 15 flights from Boise, Idaho and 8 flights from Salina, Kansas. NASA’s ER-2 completed 11 flights, partially in support of the FIREX-AQ effort. The ER-2 payload was made up of 8 satellite analog instruments and provided critical fire information, including fire temperature, fire plume heights, and vegetation/soil albedo information. NOAA provided the NOAA-CHEM Twin Otter and the NOAA-MET Twin Otter aircraft to measure chemical processing in the lofted plumes of Western wildfires. The NOAA-CHEM Twin Otter focused on nighttime plume chemistry, from which data is archived at the NASA Atmospheric Science Data Center (ASDC). The NOAA-MET Twin Otter collected measurements of air movements at fire boundaries with the goal of understanding the local weather impacts of fires and the movement patterns of fires. NOAA-MET Twin Otter data will be archived at the ASDC in the future. Additionally, a ground-based station in McCall, Idaho and several mobile laboratories provided in-situ measurements of aerosol microphysical and optical properties, aerosol chemical compositions, and trace gas species. The Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign was a NOAA/NASA interagency intensive study of North American fires to gain an understanding on the integrated impact of the fire emissions on the tropospheric chemistry and composition and to assess the satellite’s capability for detecting fires and estimating fire emissions. The overarching goal of FIREX-AQ was to provide measurements of trace gas and aerosol emissions for wildfires and prescribed fires in great detail, relate them to fuel and fire conditions at the point of emission, characterize the conditions relating to plume rise, and follow plumes downwind to understand chemical transformation and air quality impacts.

restrictednotspecifiedApr 2025View details →
nasa24/100

AIRS/Aqua Granule map product V005 (AIRXAMAP) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. The AIRS Granule Map Product consists of images of granule coverage in PDF and JPG format. The images are daily ones but updated every 6 minutes to capture any new available granule. Granules are assembled by ascending, descending, in north and south hemisphere, and the maps are in global cylindrical projection and satellite projection for better view.

restrictednotspecifiedMar 2025View details →
nasa24/100

NARSTO EPA Supersite (SS) Houston, Texas Air Quality Study 2000 (TexAQS2000) Particulate Matter (PM) 2.5 Organic Speciation Data

The NARSTO_EPA_SS_HOUSTON_TEXAQS2000_PM25_ORG_DATA is North American Research Strategy for Tropospheric Ozone (NARSTO) Environmental Protection Agency (EPA) Supersite (SS) Houston, Texas Air Quality Study 2000 (TexAQS2000) Particulate Matter (PM) 2.5 Organic Speciation Data. This file contains 24-hour integrated organic speciation of fine particulate matter (PM2.5) collected August 15, 2000 through September 30, 2000 at the HRM Site 3, Aldine, and La Porte Houston Supersite monitoring locations during TexAQS2000. The filters were extracted with hexane and benzene: isopropanol. Polar compounds were analyzed after derivatization with either diazomethane or bis-trimethylsilyl-trifluoroacetamide. All compounds were quantified by gas chromatography-mass spectrometry. The Houston Supersite is one of several Supersites that was established in urban areas within the United States by the U.S. Environmental Protection Agency (EPA) to better understand the measurement, sources, and health effects of suspended particulate matter (PM). The overall goals were to characterize the composition and identify the sources of particulate matter in Southeastern Texas, to develop and test new methods for characterizing fine particulate matter, and to collect data on the physical and chemical characterization of fine particulate matter that can be used to support exposure and health effects studies.NARSTO, which has since disbanded, was a public/private partnership, whose membership spanned across government, utilities, industry, and academe throughout Mexico, the United States, and Canada. The primary mission was to coordinate and enhance policy-relevant scientific research and assessment of tropospheric pollution behavior; activities provide input for science-based decision-making and determination of workable, efficient, and effective strategies for local and regional air-pollution management. Data products from local, regional, and international monitoring and research programs are still available.

restrictednotspecifiedApr 2025View details →
nasa24/100

NARSTO EPA Supersite (SS) New York Air Chemistry, Particulate Matter, and Meteorological Data

NARSTO_EPA_SS_NEW_YORK_AIR_CHEM_PM_MET_DATA is the North American Research Strategy for Tropospheric Ozone (NARSTO) Environmental Protection Agency (EPA) Supersite (SS) New York Air Chemistry, Particulate Matter, and Meteorological Data. It was collected between 2001 and 2006 during the PM2.5 Technology Assessment and Characterization Study in New York State (PMTACS-NY). Data files from all components of the PMTACS-NY Supersite program are archived in this single data set. The PMTACS-NY Supersite program provided a unique and unparalleled opportunity to enhance our understanding of ozone/PM2.5-precursor relationships and track progress in current precursor emission control programs and assess their effectiveness in achieving expected air quality responses. The impact of this research is highly significant, providing a sound scientific basis for informed effective decisions in the management of air quality in New York and significant benefit to its citizens - both environmentally and economically. The U.S. EPA Particulate Matter (PM) Supersites Program was an ambient air monitoring research program designed to provide information of value to the atmospheric sciences, and human health and exposure research communities. Eight geographically diverse projects were chosen to specifically address these EPA research priorities: (1) to characterize PM, its constituents, precursors, co-pollutants, atmospheric transport, and its source categories that affect the PM in any region; (2) to address the research questions and scientific uncertainties about PM source-receptor and exposure-health effects relationships; and (3) to compare and evaluate different methods of characterizing PM including testing new and emerging measurement methods.NARSTO, which has since disbanded, was a public/private partnership, whose membership spanned across government, utilities, industry, and academe throughout Mexico, the United States, and Canada. The primary mission was to coordinate and enhance policy-relevant scientific research and assessment of tropospheric pollution behavior; activities provide input for science-based decision-making and determination of workable, efficient, and effective strategies for local and regional air-pollution management. Data products from local, regional, and international monitoring and research programs are still available.

restrictednotspecifiedApr 2025View details →
nasa24/100

REGIONAL AIR-SEA INTERACTION (RASI) GAP WIND AND COASTAL UPWELLING EVENTS CLIMATOLOGY GULF OF TEHUANTEPEC, MEXICO V1

The Regional Air-Sea Interactions (RASI) Gap Wind and Coastal Upwelling Events Climatology Gulf of Tehuantepec, Mexico dataset was created using an automated intelligent algorithm which identified gap wind and coastal ocean upwelling events using two satellite-based microwave datasets. The Cross-Calibrated Multi-Platform (CCMP) ocean surface wind data product was used for wind data while the Optimally Interpolated Sea Surface Temperatures (OISST) data product provided by Remote Sensing Systems was used for sea surface temperatures. Data is available from January 1, 1998 through December 31, 2011 for Gulf of Tehuantepec, Mexico. The RASI datasets are products resulting from DISCOVER, a NASA MEaSUREs-funded project.

restrictednotspecifiedApr 2025View details →
nasa24/100

AIRS/Aqua L3 5-day Quantization in Physical Units (AIRS+AMSU) 5 degrees x 5 degrees V006 (AIRX3QP5) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The quantization products (QP) are distributional summaries derived from the Level-2 standard retrieval products (of swath type) to provide a more comprehensive set of statistical summaries than the traditional means and standard deviation. The QP products combine the Level 2 standard data parameters over grid cells of 5 x 5 deg spatial extent for temporal periods of five days from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.

restrictednotspecifiedApr 2025View details →
nasa24/100

AIRS/Aqua L3 Monthly Quantization in Physical Units (AIRS-only) 5 degrees x 5 degrees V006 (AIRS3QPM) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. AIRS/Aqua Level 3 monthly quantization product is in physical units (AIRS Only). The quantization products (QP) are distributional summaries derived from the Level-2 standard retrieval products (of swath type) to provide a more comprehensive set of statistical summaries than the traditional means and standard deviation. The QP products combine the Level 2 standard data parameters over grid cells of 5 x 5 deg spatial extent for temporal periods of a month. They preserve the multivariate distributional features of the original data and so provide a compressed data set that more accurately describes the disparate atmospheric states that is in the original Level-2 swath data set. The geophysical parameters are: Air Temperature and Water Vapor profiles (11 levels/layers), Cloud fraction (vertical distribution).

restrictednotspecifiedApr 2025View details →
nasa24/100

AIRS/Aqua L1B Near Real Time (NRT) Visible/Near Infrared (VIS/NIR) geolocated and calibrated radiances V005 (AIRVBRAD_NRT) at GES DISC

The AIRS Visible/Near Infrared (VIS/NIR) Level 1B Near Real Time (NRT) product (AIRVBRAD_NRT_005) differs from the routine product (AIRVBRAD_005) in 2 ways to meet the three hour latency requirements of the Land Atmosphere NRT Capability Earth Observing System (LANCE): (1) The NRT granules are produced without previous or subsequent granules if those granules are not available within 5 minutes, (2) the predictive ephemeris/attitude data are used rather than the definitive ephemeris/attitude. The consequences of these differences are described in the AIRS Near Real Time (NRT) data products document. The AIRS VIS/NIR level 1B data set contains visible and near-infrared calibrated and geolocated radiances in W/m^2/micron/steradian for 4 channels in the 0.4 to 1.0 um region of the spectrum. The spectral range of the VIS/NIR channels are as follows: Channel 1 0.41 um - 0.44 um, Channel 2 0.58 um - 0.68 um, Channel 3 0.71 um - 0.92 um, Channel 4 0.49 um - 0.94 um. The AIRVBRAD_NRT_005 products are stored in files (often referred to as "granules") that contain 6 minutes of data, 90 footprints across track by 135 lines along track. The VIS/NIR granules are only produced in the daytime so there will always be fewer VIS/NIR granules than Infrared or microwave granules.

restrictednotspecifiedMar 2025View details →
nasa24/100

Use of the Operational Air Quality Monitor (AQM) for In-Flight Water Testing Project

<p>Currently, the Air Quality Monitor (AQM) on-board ISS provides specific information for a number of target compounds in the air. However, there is a significant subset of common target compounds between air and water.  Naturally, the following question arises, “Can the AQM be used for both air and water quality monitoring?”  Previous directorate-level IR&D funding led to the development of a water sample introduction method for mass spectrometry using electro-thermal vaporization (ETV).  This vaporization source allows analytes in water samples to enter the gas phase, where they can be analyzed using a variety of techniques.  This project will focus on the integration of the ETV with a ground-based AQM.  The capabilities of this integrated platform will be evaluated using a subset of toxicologically important compounds.</p><p>The ETV unit was constructed using two glass tubes and a nichrome ribbon powered by a programmable DC power supply (G W Instec, PSM-3004).  The nichrome ribbon was threaded through two 3-mm wide, 1-cm-long slot cuts on the inner tube placed 1.5 cm past the inlet.  The ribbon was held securely by compressing it between the inner tube and two halves of an outer glass tube.  These halves were held together using a flexible metal clamp.  Inside the inner tube the ribbon was slightly curved, and an indent (1 mm diameter) was made on its surface for depositing a measured liquid sample drop.  The ribbon was positioned in the upper half of the inner tube in such a way that the edge of the ribbon faced the front (inlet) side of the ETV unit.  Holes (1 mm diameter) were made on the outer and inner glass tubes for sample introduction and were aligned with the ribbon indent.</p><p>The viability of the ETV approach for the analysis of water analytes was demonstrated using a ground-based, laboratory scale analyzer (reference:  Dwivedi, P. et al.  “Electro-Thermal Vaporization Direct Analysis in Real Time-Mass Spectrometry for Water Contaminant Analysis During Space Missions,” Analytical Chemistry, 85, 9898-9906 (2013)).  The work in this proposal will extend that effort and interface the ETV to a ground version of the current in-flight AQM.  Liquid sample will be introduce via a pipet through the sample injection port and placed onto the nichrome ribbon heated to a set temperature by an external, programmable power supply.  Upon vaporization of the water sample, the target analytes will be swept into the AQM Sample-In port using nitrogen carrier gas.  A vapor-phase analysis can then be performed by the AQM to identify and quantify the target analytes in the water samples.  Parameters to be optimized include water sample size, carrier gas sweep rate, and ribbon temperature.  The operating parameters of the vapor-phase analysis performed by the AQM will also need to be modified for this type of sampling methodology.  A simple two-position valve attached to the ETV and a diverter tube will allow for manual selection of either a water sample through the ETV or an air sample through the diverter tube.  The primary objective of this effort is to evaluate the viability of the ETV with ground-based, flight hardware.  A proof-of-concept unit capable of water and air analysis utilizing the ETV will be developed.  The target water analytes to be used in this work will come from a list provided by the water SMEs in the Toxicology and Environmental Chemistry Laboratories at JSC.  These analytes are commonly observed in the ground analysis of water samples from ISS.  A preliminary engineering evaluation of this set-up could potentially be performed with the goal of formulating a viable plan of integrating the ETV to the control soft

restrictednotspecifiedMar 2025View details →
nasa24/100

OCO-2 Level 2 CO2 prior based on CO2 monthly flask record, global meteorology, and age of air V11.2 (OCO2_L2_CO2Prior) at GES DISC

Version 11.2 is the current version of the data set. Older versions will no longer be available and are superseded by Version 11.2. The Orbiting Carbon Observatory is the first NASA mission designed to collect space-based measurements of atmospheric carbon dioxide with the precision, resolution, and coverage needed to characterize the processes controlling its buildup in the atmosphere. The OCO-2 project uses the LEOStar-2 spacecraft that carries a single instrument. It incorporates three high-resolution spectrometers that make coincident measurements of reflected sunlight in the near-infrared CO2 near 1.61 and 2.06 micrometers and in molecular oxygen (O2) A-Band at 0.76 micrometers.

restrictednotspecifiedApr 2025View details →
nasa24/100

DISCOVER-AQ California Deployment San Joaquin Valley Air Pollution Control District Ground Site Data

DISCOVERAQ_California_Ground_SJV_Data contains data collected by the San Joaquin Valley (SJV) Air Pollution Control District at ground sites around the study area, including Bakersfield, Clovis, Corcoran, Fresno, Hanford, Huron, Madera, Parlier, Porterville, Tranquility and Visalia Airport as part of the California (San Joaquin Valley) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the California deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.

restrictednotspecifiedApr 2025View details →
nasa24/100

IceBridge Paroscientific L0 Pressure Altimeter Raw Air Pressure, Version 1

This data set contains air pressure readings taken over Antarctica using the Paroscientific Digiquartz Transmitter. The data were collected by scientists working on the Investigating the Cryospheric Evolution of the Central Antarctic Plate (ICECAP) project, which is funded by the National Science Foundation (NSF) and the Natural Environment Research Council (NERC), with additional support from NASA Operation IceBridge.

restrictednotspecifiedApr 2025View details →
nasa24/100

GLERL Great Lakes Air Temperature/Degree Day Climatology, 1897-1983, Version 1

Daily maximum and minimum temperatures for 25 stations around the Great Lakes, 1897 to 1983, were given to NSIDC by the NOAA Great Lakes Environmental Research Laboratory (GLERL), Ann Arbor, MI. Daily data can be used to produce daily maximum, minimum, and mean temperatures, and seasonal accumulations of freezing and thawing degree days. The statistical data are archived in ASCII text files transcribed from 25 reels of 35 mm microfilm, one roll per station. Microfilm rolls are the appendices to Assel (1980), with updates covering 1978 to 1983 spliced to the end of each microfilm roll. Data sources include U.S. Department of Commerce summaries of meteorological data for Minnesota, Michigan, Wisconsin, Illinois, Pennsylvania, and New York, and the monthly meteorological observations published by Environment Canada.

restrictednotspecifiedApr 2025View details →
nasa24/100

AIRS/Aqua L2 Near Real Time (NRT) Cloud-Cleared Infrared Radiances (AIRS-only) V006 (AIRS2CCF_NRT) at GES DISC

The Atmospheric Infrared Sounder (AIRS) Level 2 Near Real Time (NRT) Cloud-Cleared Infrared Radiances (AIRS-only) product (AIRS2CCF_NRT_006) differs from the routine product (AIRS2CCF_006) in four ways to meet the three hour latency requirements of the Land Atmosphere NRT Capability Earth Observing System (LANCE): (1) The NRT granules are produced without previous or subsequent granules if those granules are not available within 5 minutes, (2) the predictive ephemeris/attitude data are used rather than the definitive ephemeris/attitude, (3) if the forecast surface pressure is unavailable, a surface climatology is used, and (4) no ice cloud properties retrievals are performed. The consequences of these differences are described in the AIRS Near Real Time (NRT) data products document. The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. This product is produced using AIRS IR only because the radiometric noise in AMSU channel 4 started to increase significantly (since June 2007). Cloud-Cleared Radiances contain calibrated, geolocated channel-by-channel AIRS infrared radiances (milliWatts/m2/cm-1/steradian) that would have been observed within each AMSU footprint if there were no clouds in the FOV and produced along with the AIRS Standard Product, as they are the radiances used to retrieve the Standard Product. Nevertheless, they are an order of magnitude larger in data volume than the remainder of the Standard Products and, many Standard Product users are expected to have little interest in the Cloud Cleared Radiance. For these reasons they are a separate output file. The AIRS2CCF_NRT_006 products are stored in files (often referred to as "granules") that contain 6 minutes of data, 30 footprints across track by 45 lines along track.

restrictednotspecifiedMar 2025View details →
nasa24/100

AIRS/Aqua L3 5-day Quantization in Physical Units (AIRS+AMSU+HSB) 5 degrees x 5 degrees V006 (AIRH3QP5) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The quantization products (QP) are distributional summaries derived from the Level-2 standard retrieval products (of swath type) to provide a more comprehensive set of statistical summaries than the traditional means and standard deviation. The QP products combine the Level 2 standard data parameters over grid cells of 5 x 5 deg spatial extent for temporal periods of five days. Pentads always start on the 1st, 6th, 11th, 16th, 21st, and 26th days of the month and may contain as few as 3 days of data or as much as 6 days. They preserve the multivariate distributional features of the original data and so provide a compressed data set that more accurately describes the disparate atmospheric states that is in the original Level-2 swath data set. The geophysical parameters are: Air Temperature and Water Vapor profiles (11 levels/layers), Cloud fraction (vertical distribution).

restrictednotspecifiedApr 2025View details →
nasa24/100

DISCOVER-AQ California Deployment California Air Resources Board (CARB) Data

DISCOVERAQ_California_Ground_CARB_Data contains data collected by the California Air Resources Board (CARB) at various ground sites throughout the study area, including Fresno, Oildale, and Shafter as part of the California (San Joaquin Valley) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the California deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.

restrictednotspecifiedApr 2025View details →
nasa24/100

GOES-R PLT Geostationary Coastal and Air Pollution Event (GEO-CAPE) Airborne Simulator (GCAS)

The GOES-R PLT Geostationary Coastal and Air Pollution Event (GEO-CAPE) Airborne Simulator (GCAS) dataset consist of solar backscattered radiation measured by the Geostationary Coastal and Air Pollution Event (GEO-CAPE) Airborne Simulator (GCAS) flown aboard a NASA ER-2 high-altitude aircraft during the GOES-R Post Launch Test (PLT) field campaign. The GOES-R PLT field campaign took place from March to May of 2017 in support of post-launch L1B product validation of the Advanced Baseline Image (ABI) and the Geostationary Lightning Mapper (GLM). Data files in HDF-5 format are available for March 21, 2017 through May 14, 2017.

restrictednotspecifiedApr 2025View details →
nasa24/100

NARSTO EPA Supersite (SS) Houston, Texas Air Quality Study 2000 (TexAQS2000) Size-specific Particulate Matter (PM) Mass Concentration Data

NARSTO_EPA_SS_HOUSTON_TEXAQS2000_PM_SIZE_MASS is North American Research Strategy for Tropospheric Ozone (NARSTO) Environmental Protection Agency (EPA) Supersite (SS) Houston, Texas Air Quality Study 2000 (TexAQS2000) Size-specific Particulate Matter (PM) Mass Concentration Data. This file reports size segregated mass particulate data collected with a micro-orifice uniform deposit impactors (MOUDI) sampler during the TexAQS2000 at the Houston Regional Monitoring (HRM) Site 3 and LaPorte Houston Supersite monitoring locations. Daily MOUDI sampling began on August 17, 2000 and ended on September 13, 2000. The MOUDI is a model 100 rotating micro-orifice uniform deposit impactor from MSP Corporation. The Houston Supersite is one of several Supersites that was established in urban areas within the United States by the U.S. Environmental Protection Agency (EPA) to better understand the measurement, sources, and health effects of suspended PM. The overall goals were to characterize the composition and identify the sources of PM in Southeastern Texas, to develop and test new methods for characterizing fine PM, and to collect data on the physical and chemical characterization of fine PM that can be used to support exposure and health effects studies. NARSTO, which has since disbanded, was a public/private partnership, whose membership spanned across government, utilities, industry, and academe throughout Mexico, the United States, and Canada. The primary mission was to coordinate and enhance policy-relevant scientific research and assessment of tropospheric pollution behavior; activities provide input for science-based decision-making and determination of workable, efficient, and effective strategies for local and regional air-pollution management. Data products from local, regional, and international monitoring and research programs are still available.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.